scholarly journals Buffer Additives and Packaging Differentially Influence the Stability of Dyes Commonly Used in Chromovitrectomy

2016 ◽  
Vol 1 (3) ◽  
pp. 1-10
Author(s):  
Begoña Parrado Aliod ◽  
Wilfried Kugler ◽  
Tim Häring
Keyword(s):  
Polyethylene Glycol ◽  
Chemical Stability ◽  
Deuterium Oxide ◽  
Oxidative Degradation ◽  
Bromophenol Blue ◽  
Physiological Range ◽  
Vis Spectroscopy ◽  
The Stability ◽  
Acid Violet ◽  
Dye Solutions

Purpose: This study was performed to investigate the chemical stability of different dyes used in chromovitrectomy and the influence of various product parameters on it. Methods: Buffered dye solutions were prepared containing 1.5 g/L acid violet 17, 0.25 g/L brilliant blue G, 1.3 g/L bromophenol blue, and 1.5 g/L trypan blue, combined with deuterium oxide, polyethylene glycol 3350, and D-mannitol as additives. For accelerated storage testing, samples were incubated for 400 h at 80°C corresponding to 2 years according to the Van ‘t Hoff equation. After different incubation times samples were taken for UV/Vis spectroscopy, pH measurement, and osmometry. Results: Depending on dye, additive, and packaging, different solutions exhibit differences in chemical stability and hence shelf life. Packaging in syringes instead of vials increases dye stability. Additives may negatively influence important parameters, e.g. polyethylene glycol 3350 increases osmolality beyond the physiological range. Notably, acid violet 17 is chemically unstable except in D-mannitol-containing buffer, packed in syringes. However, simultaneously, D-mannitol leads to a pH shift below 7.0. Conclusion: In summary, dye solutions filled in syringes should be preferred to vials to slow down oxidative degradation. Especially acid violet 17 solutions should be used with caution because the addition of D-mannitol may contribute to pH values beyond the physiological range.

Seed-mediated synthesis and PEG coating of gold nanoparticles for controlling morphology and sizes

MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3353-3360
Author(s):  
Susana Helena Arellano Ramírez ◽  
Perla García Casillas ◽  
Christian Chapa González
Keyword(s):  
Gold Nanoparticles ◽  
Polyethylene Glycol ◽  
Room Temperature ◽  
Colloidal Stability ◽  
Infrared Spectrometry ◽  
Ammonium Bromide ◽  
Chloroauric Acid ◽  
Vis Spectroscopy ◽  
Seed Mediated ◽  
Peg Coating

AbstractA significant area of research is biomedical applications of nanoparticles which involves efforts to control the physicochemical properties through simple and scalable processes. Gold nanoparticles have received considerable attention due to their unique properties that they exhibit based on their morphology. Gold nanospheres (AuNSs) and nanorods (AuNRs) were prepared with a seed-mediated method followed of polyethylene glycol (PEG)-coating. The seeds were prepared with 0.1 M cetyltrimethyl-ammonium bromide (CTAB), 0.005 M chloroauric acid (HAuCl4), and 0.01 M sodium borohydride (NaBH4) solution. Gold nanoparticles with spherical morphology was achieved by growth by aggregation at room temperature, while to achieve the rod morphology 0.1 M silver nitrate (AgNO3) and 0.1 M ascorbic acid solution were added. The gold nanoparticles obtained by the seed-mediated synthesis have spherical or rod shapes, depending on the experimental conditions, and a uniform particle size. Surface functionalization was developed using polyethylene glycol. Morphology, and size distribution of AuNPs were evaluated by Field Emission Scanning Electron Microscopy. The average size of AuNSs, and AuNRs was 7.85nm and 7.96 x 31.47nm respectively. Fourier transform infrared spectrometry was performed to corroborate the presence of PEG in the AuNPs surface. Additionally, suspensions of AuNSs and AuNRs were evaluated by UV-Vis spectroscopy. Gold nanoparticles were stored for several days at room temperature and it was observed that the colloidal stability increased once gold nanoparticles were coated with PEG due to the shield formed in the surface of the NPs and the increase in size which were 9.65±1.90 nm of diameter for AuNSs and for AuNRs were 29.03±5.88 and 8.39±1.02 nm for length and transverse axis, respectively.

A review of lignin hydrogen peroxide oxidation chemistry with emphasis on aromatic aldehydes and acids

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajinkya More ◽  
Thomas Elder ◽  
Zhihua Jiang
Keyword(s):  
Hydrogen Peroxide ◽  
Oxidative Degradation ◽  
Reaction Medium ◽  
Dicarboxylic Acids ◽  
Aromatic Aldehydes ◽  
Product Distribution ◽  
Reaction Conditions ◽  
Alkaline Conditions ◽  
The Stability ◽  
Oxidation Chemistry

Abstract This review discusses the main factors that govern the oxidation processes of lignins into aromatic aldehydes and acids using hydrogen peroxide. Aromatic aldehydes and acids are produced in the oxidative degradation of lignin whereas mono and dicarboxylic acids are the main products. The stability of hydrogen peroxide under the reaction conditions is an important factor that needs to be addressed for selectively improving the yield of aromatic aldehydes. Hydrogen peroxide in the presence of heavy metal ions readily decomposes, leading to minor degradation of lignin. This degradation results in quinones which are highly reactive towards peroxide. Under these reaction conditions, the pH of the reaction medium defines the reaction mechanism and the product distribution. Under acidic conditions, hydrogen peroxide reacts electrophilically with electron rich aromatic and olefinic structures at comparatively higher temperatures. In contrast, under alkaline conditions it reacts nucleophilically with electron deficient carbonyl and conjugated carbonyl structures in lignin. The reaction pattern in the oxidation of lignin usually involves cleavage of the aromatic ring, the aliphatic side chain or other linkages which will be discussed in this review.

scholarly journals Investigations of ternary complexes of Co(II) and Ni(II) with thiodiacetate anion and 1,10-phenanthroline or 2,2’-bipyridine in aqueous solutions

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Dariusz Wyrzykowski ◽  
Joanna Pranczk ◽  
Dagmara Jacewicz ◽  
Aleksandra Tesmar ◽  
Bogusław Pilarski ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Substitution Reactions ◽  
Experimental Conditions ◽  
Kinetic Measurements ◽  
Hydroxo Complexes ◽  
Binary Complexes ◽  
Vis Spectroscopy ◽  
Potentiometric Titration Method ◽  
The Stability ◽  
Ph Range

AbstractA potentiometric titration method (PT) and a stopped-flow kinetic technique monitored by a UV−Vis spectroscopy have been used to characterize the stability of series of Co(II)- and Ni(II)-thiodiacetato complexes, M(TDA), in the presence of 1,10-phenanthroline (phen) or 2,2’-bipyridine (bipy) in aqueous solutions. The stability constants of the binary (1:1), ternary (1:1:1) as well as the resulting hydroxo complexes were evaluated and compared to the corresponding oxydiacetate complexes. Based on the species distribution as a function of pH the relative predominance of the species in the system over a pH range was discussed. Furthermore, the kinetic measurements of the substitution reactions of the aqua ligands to phen or bipy in the coordination sphere of the binary complexes M(TDA) were performed in the 288–303 K temperature range, at a constant concentration of phen or bipy and at seven different concentrations of the binary complexes (0.2–0.5 mM). The kinetic stability of the M(TDA) complexes was discussed in relation to the experimental conditions and the kind of the auxiliary ligands (phen/bipy). Moreover, the influence of the type of primary ligand (thiodiacetate/oxydiacetate) on the substitution rate of the auxiliary ligands was also compared.

scholarly journals UV-VIS spectroscopy for monitoring yogurt stability during storage time

2016 ◽  
Vol 8 (30) ◽  
pp. 5962-5969 ◽  
Author(s):  
B. Aliakbarian ◽  
L. Bagnasco ◽  
P. Perego ◽  
R. Leardi ◽  
M. Casale
Keyword(s):  
Storage Time ◽  
Dairy Product ◽  
Entire Period ◽  
Vis Spectroscopy ◽  
The Stability ◽  
Color Texture

Color, texture and taste are key elements of a consumer's buying decision; thus, monitoring the stability of these features throughout the entire period of yogurt validity is fundamental for dairy product producers.

Stability of dronabinol capsules when stored frozen, refrigerated, or at room temperature

2016 ◽  
Vol 73 (14) ◽  
pp. 1088-1092 ◽  
Author(s):  
Michael F. Wempe ◽  
Alan Oldland ◽  
Nancy Stolpman ◽  
Tyree H. Kiser
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Oxidative Degradation ◽  
Storage Condition ◽  
Sesame Oil ◽  
Forced Degradation ◽  
Product Packaging ◽  
Time Points ◽  
The Stability ◽  
Minimal Reduction

Abstract Purpose Results of a study to determine the 90-day stability of dronabinol capsules stored under various temperature conditions are reported. Methods High-performance liquid chromatography (HPLC) with ultraviolet (UV) detection was used to assess the stability of dronabinol capsules (synthetic delta-9-tetrahydrocannabinol [Δ9-THC] mixed with high-grade sesame oil and other inactive ingredients and encapsulated as soft gelatin capsules) that were frozen, refrigerated, or kept at room temperature for three months. The dronabinol capsules remained in the original foil-sealed blister packs until preparation for HPLC–UV assessment. The primary endpoint was the percentage of the initial Δ9-THC concentration remaining at multiple designated time points. The secondary aim was to perform forced-degradation studies under acidic conditions to demonstrate that the HPLC–UV method used was stability indicating. Results The appearance of the dronabinol capsules remained unaltered during frozen, cold, or room-temperature storage. Regardless of storage condition, the percentage of the initial Δ9-THC content remaining was greater than 97% for all evaluated samples at all time points over the three-month study. These experimental data indicate that the product packaging and the sesame oil used to formulate dronabinol capsules efficiently protect Δ9-THC from oxidative degradation to cannabinol; this suggests that pharmacies can store dronabinol capsules in nonrefrigerated automated dispensing systems, with a capsule expiration date of 90 days after removal from the refrigerator. Conclusion Dronabinol capsules may be stored at room temperature in their original packaging for up to three months without compromising capsule appearance and with minimal reduction in Δ9-THC concentration.

Formulation, Physical and Chemical Stability of Ocimum gratissimum L. Leaf Oil Nanoemulsion

2021 ◽  
Vol 901 ◽  
pp. 117-122
Author(s):  
Netnapa Ontao ◽  
Sirivan Athikomkulchai ◽  
Sarin Tadtong ◽  
Phuriwat Leesawat ◽  
Chuda Chittasupho
Keyword(s):  
Essential Oil ◽  
Zeta Potential ◽  
Chemical Stability ◽  
Polydispersity Index ◽  
Hydrodynamic Diameter ◽  
Potential Value ◽  
Yellow Color ◽  
Leaf Oil ◽  
The Stability ◽  
Physical And Chemical

Ocimum gratissimum L. leaf oil exhibited many pharmacological properties. This study aimed to formulate and evaluate the physical and chemical stability of O.gratissimum leaf oil nanoemulsion. O.gratissimum leaf oil was extracted by hydrodistillation. The major component of the essential oil eugenol, was analyzed by UV-Vis spectrophotometry. Nanoemulsions of O.gratissimum leaf oil were formulated using polysorbate 80, hyaluronic acid, poloxamer 188, and deionized water by phase inversion composition method. The hydrodynamic diameter, polydispersity index, and zeta potential value of O.gratissimum leaf oil nanoemulsion was evaluated by a dynamic light scattering technique. The %remaining of eugenol in the nanoemulsion was analyzed by UV-Vis spectrophotometry. The essential oil extracted from of O. gratissimum leaf oil was a clear, pale yellow color. The %yield of the essential oil was 0.15 ± 0.03% v/w. The size of the nanoemulsion was less than 106 nm. The polydispersity index of the nanoemulsion was ranging from 0.303 - 0.586 and the zeta potential value of the nanoemulsion was closely to zero, depending on the formulation component. O. gratissimum leaf oil at concentrations ranging from 0.002 - 0.012% v/v contained 35 - 41% of eugenol. The size of nanoemulsion was significantly decreased after storage at 4 °C, while significantly increased upon storage at 45 °C. The size of nanoemulsion stored at 30 °C did not significantly change. The %remaining of eugenol in the nanoemulsion was more than 90% after storage at 4 °C and 30 °C for 28 days. The percentage of eugenol remaining in the nanoemulsion stored at 45 °C was more than 85 - 90%, suggesting that the temperature affected the stability of eugenol in the nanoemulsion.

scholarly journals Colorimetry-Based Detection of Nitric Oxide from Exhaled Breath for Quantification of Oxidative Stress in Human Body

Healthcare ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1055
Author(s):  
Muni Raj Maurya ◽  
Haseena Onthath ◽  
Hagar Morsy ◽  
Najam-US-Sahar Riyaz ◽  
Muna Ibrahim ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Nitric Oxide ◽  
Human Body ◽  
Ph Effect ◽  
High Sensitivity ◽  
Fast Response ◽  
The Body ◽  
Bromophenol Blue ◽  
Exhaled Breath ◽  
Vis Spectroscopy

Monitoring exhaled breath is a safe, noninvasive method for determining the health status of the human body. Most of the components in our exhaled breath can act as health biomarkers, and they help in providing information about various diseases. Nitric oxide (NO) is one such important biomarker in exhaled breath that indicates oxidative stress in our body. This work presents a simple and noninvasive quantitative analysis approach for detecting NO from exhaled breath. The sensing is based on the colorimetric assisted detection of NO by m-Cresol Purple, Bromophenol Blue, and Alizaringelb dye. The sensing performance of the dye was analyzed by ultraviolet–visible (UV–Vis) spectroscopy. The study covers various sampling conditions like the pH effect, temperature effect, concentration effect, and selective nature of the dye. The m-Cresol Purple dye exhibited a high sensitivity towards NO with a detection limit of ~0.082 ppm in the linear range of 0.002–0.5 ppm. Moreover, the dye apprehended a high degree of selectivity towards other biocompounds present in the breath, and no possible interfering cross-reaction from these species was observed. The dye offered a high sensitivity, selectivity, fast response, and stability, which benchmark its potential for NO sensing. Further, m-Cresol Purple dye is suitable for NO sensing from the exhaled breath and can assist in quantifying oxidative stress levels in the body for the possible detection of COVID-19.

scholarly journals Modifications of proteins of membrane-cytoskeleton complex and production of reactive oxygen species in erythrocytes cryopreserved with polyethylene glycol

2021 ◽  
Vol 67 (2) ◽  
pp. 44-52
Author(s):  
N.G. Zemlianskykh ◽  
◽  
L.O. Babiychuk ◽  
Keyword(s):  
Reactive Oxygen Species ◽  
Polyethylene Glycol ◽  
Protein Profile ◽  
Control Level ◽  
Reactive Oxygen ◽  
Fold Increase ◽  
Oxygen Species ◽  
Membrane Cytoskeleton ◽  
Extreme Factors ◽  
The Stability

Protein modifications in the membrane-cytoskeleton complex (MCC) of human erythrocytes, as well as changes in the intensity of reactive oxygen species (ROS) production upon cell cryopreservation with polyethylene glycol (PEG) were investigated. The protein profile of ghosts of erythrocytes frozen with PEG has common features with both the control and cells frozen without cryoprotectant. PEG makes it possible to restrict the structural rearrangements of the main MCC proteins under the effect of extreme factors and to restrain the amount of high molecular weight polypeptide complexes induced by the protein-cross-linking reagent diamide at the control level, in contrast to cells frozen without a cryoprotectant. However, changes related to the protein peroxiredoxin 2 in ghosts of erythrocytes cryopreserved with PEG are also attributed to cells frozen without a cryoprotectant that may be associated with the activation of oxidative processes. This is evidenced by a 10-fold increase in ROS formation in erythrocytes frozen under PEG protection. Thus, upon cryopreservation of erythrocytes with PEG, certain disorders in MCC proteins may be associated with increased formation of ROS, which may contribute to the disorganization of the structural components of MCC and disrupt the stability of cryopreserved cells under physiological conditions.

scholarly journals Dispersion stability and rheological characteristics of water and ethylene glycol based zinc oxide nanofluids

2020 ◽  
pp. 187-187
Author(s):  
Adnan Qamar ◽  
Attique Arshad ◽  
Zahid Anwar ◽  
Rabia Shaukat ◽  
Muhammad Amjad ◽  
...  
Keyword(s):  
Experimental Data ◽  
Ethylene Glycol ◽  
Industrial Applications ◽  
Deionized Water ◽  
Rheological Characteristics ◽  
Particle Loading ◽  
Viscosity Models ◽  
Vis Spectroscopy ◽  
Settling Speed ◽  
The Stability

With advancement of nanoscience, ?nanofluids? are becoming quite popular among thermal engineers. High thermal conductivity, relatively less settling speed, and higher surface area of nanoparticles are a few key promoting properties. The last two decades have seen dramatic progress towards using nanoparticles in industrial applications. However, the stability and rheological characteristics of prepared nanofluids have serious effects on their transport characteristics, but unfortunately, this has not found proper attention from researchers. In this study, stability and rheological characteristics of ZnO nanoparticles within deionized water, ethylene glycol, and their blends have been extensively tested. Stability was observed using UV-vis spectroscopy, while the viscosity was measured with the help of a rheometer. The data was collected with 0.011-0.044 wt. % loading of nanoparticles, while experiments were conducted within 15-55oC temperature range. Better stability was recorded when nanofluids were prepared with pure ethylene glycol. Experiments showed that the viscosity increased with particle loading, whereas the effect of surfactants appeared to be insignificant. Research results were used to assess predictions of different viscosity models. Experimental data was overpredicted by Einstein, Brinkman, and Batchelor?s models.

Sign in / Sign up

Export Citation Format

Share Document