scholarly journals Periodontal Ligament and Alveolar Bone in Health and Adaptation: Tooth Movement

Author(s):  
Nan Jiang ◽  
Weihua Guo ◽  
Mo Chen ◽  
Ying Zheng ◽  
Jian Zhou ◽  
...  
2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Wang ◽  
Delong Jiao ◽  
Xiaofeng Huang ◽  
Yuxing Bai

Abstract Background During orthodontic tooth movement (OTM), alveolar bone remodelling is closely related to mechanical force. It is unclear whether stem cells can affect osteoclastogenesis to promote OTM. This study aimed to investigate the role of mouse bone marrow mesenchymal stem cells (mBMMSCs) under compression load in OTM. Methods A mouse OTM model was established, and GFP-labelled mBMMSCs and normal saline were injected into different groups of mice by tail vein injection. OTM distance was measured using tissue specimens and micro-computed tomography (micro-CT). The locations of mBMMSCs were traced using GFP immunohistochemistry. Haematoxylin-eosin staining, tartrate-resistant acid phosphate (TRAP) staining and immunohistochemistry of Runx2 and lipoprotein lipase were used to assess changes in the periodontal ligament during OTM. mBMMSCs under compression were co-cultured with mouse bone marrow-derived macrophages (mBMMs), and the gene expression levels of Rankl, Mmp-9, TRAP, Ctsk, Alp, Runx2, Ocn and Osterix were determined by RT-PCR. Results Ten days after mBMMSCs were injected into the tail vein of mice, the OTM distance increased from 176 (normal saline) to 298.4 μm, as determined by tissue specimen observation, and 174.2 to 302.6 μm, as determined by micro-CT metrological analysis. GFP-labelled mBMMSCs were mostly located on the compressed side of the periodontal ligament. Compared to the saline group, the number of osteoclasts in the alveolar bone increased significantly (P < 0.01) on the compressed side in the mBMMSC group. Three days after mBMMSC injection, the number of Runx2-GFP double-positive cells on the tension side was significantly higher than that on the compression side. After applying compressive force on the mBMMSCs in vitro for 2 days, RANKL expression was significantly higher than in the non-compression cells, but expression of Alp, Runx2, Ocn and Osterix was significantly decreased (P < 0.05). The numbers of osteoclasts differentiated in response to mBMMs co-cultured with mBMMSCs under pressure load and expression of osteoclast differentiation marker genes (Mmp-9, TRAP and Ctsk) were significantly higher than those in mBMMs stimulated by M-CSF alone (P < 0.05). Conclusions mBMMSCs are not only recruited to the compressed side of the periodontal ligament but can also promote osteoclastogenesis by expressing Rankl, improving the efficiency of OTM.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
L. Feller ◽  
R. A. G. Khammissa ◽  
I. Schechter ◽  
G. Thomadakis ◽  
J. Fourie ◽  
...  

Orthodontic force-induced stresses cause dynamic alterations within the extracellular matrix and within the cytoskeleton of cells in the periodontal ligament and alveolar bone, mediating bone remodelling, ultimately enabling orthodontic tooth movement. In the periodontal ligament and alveolar bone, the mechanically induced tensile strains upregulate the expression of osteogenic genes resulting in bone formation, while mechanically induced compressive strains mediate predominantly catabolic tissue changes and bone resorption. In this review article we summarize some of the currently known biological events occurring in the periodontal ligament and in the alveolar bone in response to application of orthodontic forces and how these facilitate tooth movement.


2015 ◽  
Vol 16 (10) ◽  
pp. 819-823 ◽  
Author(s):  
HP Raghuveer ◽  
M Hemanth ◽  
MS Rani ◽  
Chathura Hegde ◽  
B Vedavathi ◽  
...  

ABSTRACT Background Optimal orthodontic forces are those which stimulate tooth movement with minimal biological trauma to the tooth, periodontal ligament (PDL) during and alveolar bone. Among various types of tooth movements, extrusion and rotational movements are seen to be associated with the least amount of root resorption and have not been studied in detail. The mechanical behavior of the PDL is known to be nonlinear elastic and thus a nonlinear simulation of the PDL provides precision to the calculated stress values. Therefore in this study, the stress patterns in the PDL were evaluated with extrusion and rotational movements using the nonlinear finite element method (FEM). Materials and methods A three-dimensional (3D) FEM model of the maxillary incisors was generated using SOLIDWORKS modelling software. Stresses in the PDL were evaluated with extrusive and rotational movements by a 3D FEM using ANSYS software with nonlinear material properties. Results It was observed that with the application of extrusive load, the tensile stresses were seen at the apex whereas the compressive stress was distributed at the cervical margin. With the application of rotational movements, maximum compressi vstress was distributed at the apex and cervical third whereas the tensile stress was distributed on cervical third of the PDL on the lingual surface. Conclusion For rotational and extrusion movements, stress values over the periodontal ligament was within the range of optimal stress value as proposed by Lee, with a given force system by Proffit as optimum forces for orthodontic tooth movement using nonlinear properties. During rotation there are stresses concentrated at the apex, hence due to the concentration of the compressive forces at the apex a clinician must avoid placing heavy stresses during tooth movement. How to cite this article Hemanth M, Raghuveer HP, Rani MS, Hegde C, Kabbur KJ, Chaithra D, Vedavathi B. An Analysis of the Stress Induced in the Periodontal Ligament during Extrusion and Rotation Movements—Part II: A Comparison of vs Nonlinear FEM Linear Study. J Contemp Dent Pract 2015; 16(10):819-823.


2021 ◽  
Vol 12 ◽  
Author(s):  
Yukun Jiang ◽  
Yuzhe Guan ◽  
Yuanchen Lan ◽  
Shuo Chen ◽  
Tiancheng Li ◽  
...  

Orthodontic tooth movement (OTM) is a process depending on the remodeling of periodontal tissues surrounding the roots. Orthodontic forces trigger the conversion of mechanical stimuli into intercellular chemical signals within periodontal ligament (PDL) cells, activating alveolar bone remodeling, and thereby, initiating OTM. Recently, the mechanosensitive ion channel Piezo1 has been found to play pivotal roles in the different types of human cells by transforming external physical stimuli into intercellular chemical signals. However, the function of Piezo1 during the mechanotransduction process of PDL cells has rarely been reported. Herein, we established a rat OTM model to study the potential role of Piezo1 during the mechanotransduction process of PDL cells and investigate its effects on the tension side of alveolar bone remodeling. A total of 60 male Sprague-Dawley rats were randomly assigned into three groups: the OTM + inhibitor (INH) group, the OTM group, and the control (CON) group. Nickel-titanium orthodontic springs were applied to trigger tooth movement. Mice were sacrificed on days 0, 3, 7, and 14 after orthodontic movement for the radiographic, histological, immunohistochemical, and molecular biological analyses. Our results revealed that the Piezo1 channel was activated by orthodontic force and mainly expressed in the PDL cells during the whole tooth movement period. The activation of the Piezo1 channel was essential for maintaining the rate of orthodontic tooth movement and facilitation of new alveolar bone formation on the tension side. Reduced osteogenesis-associated transcription factors such as Runt-related transcription factor 2 (RUNX2), Osterix (OSX), and receptor activator of nuclear factor-kappa B ligand (RANKL)/osteoprotegerin (OPG) ratio were examined when the function of Piezo1 was inhibited. In summary, Piezo1 plays a critical role in mediating both the osteogenesis and osteoclastic activities on the tension side during OTM.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Fátima Regina Nunes de Sousa ◽  
Vanessa Costa de Sousa Ferreira ◽  
Conceição da Silva Martins ◽  
Hugo Victor Dantas ◽  
Frederico Barbosa de Sousa ◽  
...  

AbstractZoledronic acid (ZA) is often prescribed for osteoporosis or resorptive metabolic bone disease. This study aims to evaluate the effect of ZA on orthodontic tooth movement (OTM) and root and bone resorption and its repercussion on root, periodontal ligament and alveolar bone tissues. The experimental group consisted of 72 Wistar rats divided in four subgroups: Naive, Saline and Zoledronic Acid groups at the concentration of 0.2 mg/kg [ZA (0.2)] or 1.0 mg/kg [ZA (1.0)]. The animals were subjected to i.v (dorsal penile vein) administrations of ZA or saline solution, on days 0, 7, 14 and 42. Under anesthesia, NiTi springs were installed in the first left maxillary molar with 50gf allowing the OTM, except for the negative control group (N) for mesial movement of the left first maxillary teeth. The animals were sacrificed and maxillae were removed for macroscopic and histopathological analyzes, scanning electron microscopy, computerized microtomography and confocal microscopy. Treatment with ZA decreased the OTM and the number of osteoclasts and loss of alveolar bone when compared to the naive and saline groups. Reduction of radicular resorption, increased necrotic areas and reduced vascularization in the periodontal ligament were observed in the ZA groups. ZA interferes with OTM and presents anti-resorptive effects on bone and dental tissues associated with a decreased vascularization, without osteonecrosis.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Judit Symmank ◽  
Martin Chorus ◽  
Sophie Appel ◽  
Jana Marciniak ◽  
Isabel Knaup ◽  
...  

Abstract Alveolar bone (AB) remodeling is necessary for the adaption to mechanical stimuli occurring during mastication and orthodontic tooth movement (OTM). Thereby, bone degradation and assembly are strongly regulated processes that can be altered in obese patients. Further, increased fatty acids (FA) serum levels affect bone remodeling cells and we, therefore, investigated whether they also influence the function of periodontal ligament fibroblast (PdLF). PdLF are a major cell type regulating the differentiation and function of osteoblasts and osteoclasts localized in the AB. We stimulated human PdLF (HPdLF) in vitro with palmitic (PA) or oleic acid (OA) and analyzed their metabolic activity, growth, survival and expression of osteogenic markers and calcium deposits. Our results emphasize that PA increased cell death of HPdLF, whereas OA induced their osteoblastic differentiation. Moreover, quantitative expression analysis of OPG and RANKL revealed altered levels in mechanically stimulated PA-treated HPdLF. Furthermore, osteoclasts stimulated with culture medium of mechanical stressed FA-treated HPdLF revealed significant changes in cell differentiation upon FA-treatment. For the first time, our results highlight a potential role of specific FA in the function of HPdLF-modulated AB remodeling and help to elucidate the complex interplay of bone metabolism, mechanical stimulation and obesity-induced alterations.


Author(s):  
Mehran Ashrafi ◽  
Farzan Ghalichi ◽  
Behnam Mirzakouchaki ◽  
Iman Zoljanahi Oskui

Orthodontic tooth movement in the alveolar bone is due to the mechanical response of periodontal ligament to applied forces. Definition of a proper constitutive model of the periodontal ligament to investigate its response to orthodontic loading is required. For this purpose, a three-dimensional finite element model of incisor tooth, periodontal ligament, and bone was built utilizing the hydro-mechanical coupling theory. Tooth displacement in response to orthodontic loading was then investigated, and the effect of different mechanical behaviors assigned to the solid phase of the periodontal ligament was compared. Results showed that where the periodontal ligament was placed in tension, pore volume was filled with fluid intake from the bone, but fluid flow direction was from the periodontal ligament toward the bone where the periodontal ligament was placed in compression. Because of the existence of interaction between solid and fluid phases of the periodontal ligament, considering biphasic material formulation was capable to address its microscopic behavior as well as time-dependent and large deformation behaviors. This article provides beneficial biomechanical data for future dental studies in determination of optimal orthodontic force.


2013 ◽  
Vol 84 (2) ◽  
pp. 297-303 ◽  
Author(s):  
Zana Kalajzic ◽  
Elizabeth Blake Peluso ◽  
Achint Utreja ◽  
Nathaniel Dyment ◽  
Jun Nihara ◽  
...  

ABSTRACT Objective: To investigate the effect of externally applied cyclical (vibratory) forces on the rate of tooth movement, the structural integrity of the periodontal ligament, and alveolar bone remodeling. Methods: Twenty-six female Sprague-Dawley rats (7 weeks old) were divided into four groups: CTRL (unloaded), VBO (molars receiving a vibratory stimulus only), TMO (molars receiving an orthodontic spring only), and TMO+VB (molars receiving an orthodontic spring and the additional vibratory stimulus). In TMO and TMO+VB groups, the rat first molars were moved mesially for 2 weeks using Nickel-Titanium coil spring delivering 25 g of force. In VBO and TMO+VB groups, cyclical forces at 0.4 N and 30 Hz were applied occlusally twice a week for 10 minutes. Microfocus X-ray computed tomography analysis and tooth movement measurements were performed on the dissected rat maxillae. Tartrate-resistant acid phosphatase staining and collagen fiber assessment were performed on histological sections. Results: Cyclical forces significantly inhibited the amount of tooth movement. Histological analysis showed marked disorganization of the collagen fibril structure of the periodontal ligament during tooth movement. Tooth movement caused a significant increase in osteoclast parameters on the compression side of alveolar bone and a significant decrease in bone volume fraction in the molar region compared to controls. Conclusions: Tooth movement was significantly inhibited by application of cyclical forces.


2012 ◽  
Vol 2012 ◽  
pp. 1-4 ◽  
Author(s):  
M. Di Domenico ◽  
F. D'apuzzo ◽  
A. Feola ◽  
L. Cito ◽  
A. Monsurrò ◽  
...  

Orthodontics is a branch of dentistry that aims at the resolution of dental malocclusions. The specialist carries out the treatment using intraoral or extraoral orthodontic appliances that require forces of a given load level to obtain a tooth movement in a certain direction in dental arches. Orthodontic tooth movement is dependent on efficient remodeling of periodontal ligament and alveolar bone, correlated with several biological and mechanical responses of the tissues surrounding the teeth. A periodontal ligament placed under pressure will result in bone resorption whereas a periodontal ligament under tension results in bone formation. In the primary stage of the application of orthodontic forces, an acute inflammation occurs in periodontium. Several proinflammatory cytokines are produced by immune-competent cells migrating by means of dilated capillaries. In this paper we summarize, also through the utilization of animal models, the role of some of these molecules, namely, interleukin-1βand vascular endothelial growth factor, that are some proliferation markers of osteoclasts and osteoblasts, and the macrophage colony stimulating factor.


Sign in / Sign up

Export Citation Format

Share Document