Psychic and Somatic Expressions of Preverbal Loss: Analysis of a Child Adopted at Thirteen Months of Age

2000 ◽  
pp. 59-70 ◽  
Author(s):  
P. Blos, Jr.
Keyword(s):  
Loss Analysis

High energy resolution spectrometer for the dedicated STEM

1984 ◽  
Vol 42 ◽  
pp. 558-559 ◽  
Author(s):  
P.E. Batson
Keyword(s):  
Collection Efficiency ◽  
Core Loss ◽  
Beam Current ◽  
High Energy ◽  
High Energy Resolution ◽  
Acquisition Time ◽  
Good Definition ◽  
Loss Analysis ◽  
Definition Of ◽  
Acceleration Voltage

Use of the STEM to obtain precise electronic information has been hampered by the lack of energy loss analysis capable of a resolution and accuracy comparable to the 0.3eV energy width of the Field Emission Source. Recent work by Park, et. al. and earlier by Crewe, et. al. have promised magnetic sector devices that are capable of about 0.75eV resolution at collection angles (about 15mR) which are great enough to allow efficient use of the STEM probe current. These devices are also capable of 0.3eV resolution at smaller collection angles (4-5mR). The problem that arises, however, lies in the fact that, even with the collection efficiency approaching 1.0, several minutes of collection time are necessary for a good definition of a typical core loss or electronic transition. This is a result of the relatively small total beam current (1-10nA) that is available in the dedicated STEM. During this acquisition time, the STEM acceleration voltage may fluctuate by as much as 0.5-1.0V.

Empirical analysis of market boundaries in telecommunications

2019 ◽  
pp. 90-111 ◽  
Author(s):  
Natalia S. Pavlova ◽  
Andrey Е. Shastitko
Keyword(s):  
Law Enforcement ◽  
Empirical Analysis ◽  
Mass Distribution ◽  
End Users ◽  
Economic Modeling ◽  
Empirical Approach ◽  
Antitrust Law ◽  
Technological Changes ◽  
Loss Analysis ◽  
E Mail

The article deals with the problem of determining market boundaries for antitrust law enforcement in the field of telecommunications. An empirical approach has been proposed for determining the product boundaries of the market in the area of mass distribution of messages, taking into account the comparative characteristics of the types and methods of notification (informing) of end users; the possibilities of switching from one way of informing to another, including the evolution of such opportunities under the influence of technological changes; switching between different notification methods. Based on the use of surveys of customers of sending SMS messages, it is shown that the product boundaries should include not only sending messages via SMS, but also e-mail, instant messengers, Push notifications and voice information. The paper illustrates the possibilities of applying the method of critical loss analysis to determining the boundaries of markets based on a mixture of surveys and economic modeling.

HEAT LOSS ANALYSIS AND OPTIMIZATION OF HOUSEHOLD SOLAR HEATING SYSTEM

2019 ◽  
Vol 50 (7) ◽  
pp. 659-670 ◽  
Author(s):  
Jieyuan Yang ◽  
Jinping Li ◽  
Rong Feng
Keyword(s):  
Heat Loss ◽  
Heating System ◽  
Solar Heating ◽  
Loss Analysis

Electrical Energy Steam Boiler Heat Loss Analysis in Japfa Comfeed Indonesia Tbk, Unit of Sidoarjo

2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Joseph Priyandana ◽  
Jamaaluddin Jamaaluddin
Keyword(s):  
Heat Loss ◽  
Animal Feed ◽  
Electrical Energy ◽  
Operating Costs ◽  
Steam Boiler ◽  
Android Application ◽  
Loss Analysis ◽  
Feed Industry ◽  
Calculation Process ◽  
Electricity Costs

In the animal feed industry, steam is used in pellet making machines. In this process, steam from the boiler is distributed to the pellet mill through the pipe. The purpose of this study is to observe the waste of electricity costs of operating a boiler by calculating heat loss in a distribution pipe. The method of assessing heat loss is done by calculating losses caused by heat loss in the boiler distribution. Then make a calculation application model based on the data obtained. From the data analyzed, the amount of heat lost in the non-insulating distribution pipe is 0.766 kJ/s with a loss of Rp 5.628,600 operating costs per month compared to heat loss in an isolated pipe condition of 0.047 kJ/s with losses which cost slightly more than Rp 368 190 / month. This heat loss calculation process is made on an android application by entering the calculation formula on the program and the data that has been obtained.

scholarly journals Device Parameter Extraction for Loss Analysis of Silicon Solar Cells Based on Intelligent Model Fitting

2018 ◽  
Vol 150 ◽  
pp. 21-27 ◽  
Author(s):  
Jian Wei Ho ◽  
Johnson Wong ◽  
Percis Teena Christopher Subhodayam ◽  
Kwan Bum Choi ◽  
Divya Ananthanarayanan ◽  
...  
Keyword(s):  
Solar Cells ◽  
Model Fitting ◽  
Parameter Extraction ◽  
Silicon Solar Cells ◽  
Loss Analysis ◽  
Device Parameter ◽  
Intelligent Model

scholarly journals Energy loss separation in NiFeMo compacts with smoothed powders according to Landgraf’s and Bertotti’s theories

2021 ◽  
Author(s):  
Denisa Olekšáková ◽  
Peter Kollár ◽  
Miloš Jakubčin ◽  
Ján Füzer ◽  
Martin Tkáč ◽  
...  
Keyword(s):  
Energy Loss ◽  
Mechanical Treatment ◽  
Positive Impact ◽  
Core Loss ◽  
Low Frequency ◽  
Treatment Method ◽  
Effective Dimension ◽  
Loss Analysis ◽  
Innovative Method ◽  
Individual Particles

AbstractThis submitted paper presents the detailed description of the energy loss separation for dc and ac low-frequency magnetic fields of NiFeMo (supermalloy) compacted powder prepared by innovative method of smoothing the surfaces of individual particles. The positive impact of mechanical treatment method on domain wall displacement is explained on the basis of Landgraf approach for dc loss analysis, and the effective dimension for eddy current in ac magnetic field is explained according to Bertotti approach for core loss analysis.

scholarly journals A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2308
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Experimental Tests ◽  
Energy Yield ◽  
Power Electronic ◽  
Solar Pv ◽  
Partial Shading ◽  
Loss Analysis ◽  
Pv Systems ◽  
Pv Module ◽  
Pv Modules ◽  
In Series

Partial shading affects the energy harvested from photovoltaic (PV) modules, leading to a mismatch in PV systems and causing energy losses. For this purpose, differential power processing (DPP) converters are the emerging power electronic-based topologies used to address the mismatch issues. Normally, PV modules are connected in series and DPP converters are used to extract the power from these PV modules by only processing the fraction of power called mismatched power. In this work, a switched-capacitor-inductor (SCL)-based DPP converter is presented, which mitigates the non-ideal conditions in solar PV systems. A proposed SCL-based DPP technique utilizes a simple control strategy to extract the maximum power from the partially shaded PV modules by only processing a fraction of the power. Furthermore, an operational principle and loss analysis for the proposed converter is presented. The proposed topology is examined and compared with the traditional bypass diode technique through simulations and experimental tests. The efficiency of the proposed DPP is validated by the experiment and simulation. The results demonstrate the performance in terms of higher energy yield without bypassing the low-producing PV module by using a simple control. The results indicate that achieved efficiency is higher than 98% under severe mismatch (higher than 50%).

Sign in / Sign up

Export Citation Format

Share Document