scholarly journals Investigating the Macro-Micromechanical Properties and Failure Law of Granite under Loading and Unloading Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chao Peng ◽  
Jianbo Wang ◽  
Huanxin Liu ◽  
Guilin Li ◽  
Wei Zhao
Keyword(s):  
Failure Modes ◽  
Numerical Models ◽  
Complex Loading ◽  
Failure Surface ◽  
Confining Pressure ◽  
Initial Stress State ◽  
Failure Characteristics ◽  
Micromechanical Properties ◽  
Loading Tests ◽  
Loading And Unloading

The excavation of rock significantly changes the initial stress state of rock slopes, which makes rock in complex loading and unloading conditions. However, the failure mechanisms and macro-micromechanical properties of rock under loading and unloading conditions are not very clear. This study investigates the macro-micromechanical properties and failure law of granite under loading and unloading conditions through traditional laboratory tests and particle flow simulations. Granite specimens are taken from Shuichang iron mine, and stress unloading experiments are designed based on the engineering practices. The stress-strain curves and failure modes under different confining pressures and unloading paths are obtained to analyze the granite properties from the viewpoint of the macroscopic mechanism. Moreover, numerical models are established in PFC software. The microcracks developments, failure characteristics, and energy evolutions under loading and unloading conditions are obtained and discussed. Results show that compared with the loading tests, the brittle failure characteristics of specimens under unloading tests are more obvious. When the confining pressure reduces to about 66% of the initial confining pressure, the specimen loses its load-bearing capacity and destroyed due to the lateral expansion. For loading tests, an inclined plane can be produced as the main failure surface. While for confining pressure unloading tests, there are many damage zones parallel to or intersecting with the main failure surface.

scholarly journals An Extension Strain Type Mohr–Coulomb Criterion

2021 ◽  
Author(s):  
Manfred Staat
Keyword(s):  
Failure Modes ◽  
Peak Stress ◽  
Fracture Initiation ◽  
Failure Surface ◽  
Confining Pressure ◽  
Biaxial Compression ◽  
Simple Extension ◽  
Strain Criterion ◽  
Shear Component ◽  
Extension Strain

AbstractExtension fractures are typical for the deformation under low or no confining pressure. They can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. In this article, it is shown that the simple extension strain criterion makes unrealistic strength predictions in biaxial compression and tension. To overcome this major limitation, a new extension strain criterion is proposed by adding a weighted principal shear component to the simple criterion. The shear weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr–Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting extension failure modes, which are unexpected in the classical understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain leading to dilatancy. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak stress CP. Different from compressive loading, tensile loading requires only a limited number of critical cracks to cause failure. Therefore, for tensile stresses, the failure criteria must be modified somehow, possibly by a cut-off corresponding to the CI stress. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.

scholarly journals Experimental Study of Stress-Seepage Coupling Properties of Sandstone under Different Loading Paths

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-21
Author(s):  
Xi Chen ◽  
Wei Wang ◽  
Yajun Cao ◽  
Qizhi Zhu ◽  
Weiya Xu ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Pore Pressure ◽  
Complex Loading ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Biot Coefficient ◽  
Cyclic Loading And Unloading ◽  
Loading And Unloading

The study on hydromechanical coupling properties of rocks is of great importance for rock engineering. It is closely related to the stability analysis of structures in rocks under seepage condition. In this study, a series of conventional triaxial tests under drained condition and hydrostatic compression tests under drained or undrained condition on sandstones were conducted. Moreover, complex cyclic loading and unloading tests were also carried out. Based on the experimental results, the following conclusions were obtained. For conventional triaxial tests, the elastic modulus, peak strength, crack initiation stress, and expansion stress increase with increased confining pressure. Pore pressure weakened the effect of the confining pressure under drained condition, which led to a decline in rock mechanical properties. It appeared that cohesion was more sensitive to pore pressure than to the internal friction angle. For complex loading and unloading cyclic tests, in deviatoric stress loading and unloading cycles, elastic modulus increased obviously in first loading stage and increased slowly in next stages. In confining pressure loading and unloading cycles, the Biot coefficient decreased first and then increased, which indicates that damage has a great impact on the Biot coefficient.

scholarly journals Experimental Study on Mechanical Properties of Deep Buried Granite under Different Confining Pressures

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jun Zhao ◽  
Tan Zhang
Keyword(s):  
Cyclic Loading ◽  
Confining Pressure ◽  
Surrounding Rock ◽  
Underground Engineering ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Cyclic Loading And Unloading ◽  
Confining Pressures ◽  
Crack Damage Stress ◽  
Loading And Unloading

Brittle failure of hard rock poses a serious threat to the stability of surrounding rock in deep underground engineering. In order to study the deformation and failure characteristics of deep buried granite under high confining pressure cyclic loading and unloading, MTS815 electro-hydraulic servo rock test system was used to conduct cyclic loading and unloading tests under confining pressures of 15 MPa, 35 MPa, 45 MPa, and 55 MPa, and the corresponding stress-strain curves and deformation failure characteristic curves were obtained. The experimental results show the follows: (1) under the same confining pressure, the peak strength, crack initiation stress, crack damage stress, and Poisson’s ratio of the specimens under cyclic loading and unloading are larger than those under conventional triaxial loading and unloading, and the unloading elastic modulus is smaller than that, under conventional triaxial compression; (2) the results show that, under different confining pressures, the granite samples show obvious brittle failure characteristics, the elastic modulus and crack initiation stress increase first and then decrease with the confining pressure, the peak strength and crack damage stress of the samples increase linearly with the confining pressure, and Poisson’s ratio increases first and then remains unchanged with the confining pressure; (3) under the two kinds of stress conditions, the macroscopic failure of the samples is mainly shear failure. The deformation and failure law of granite samples revealed in this study has significant reference value for the selection of rock mass mechanical model of surrounding rock stability of underground engineering, the formulation of surrounding rock support countermeasures, and the evolution law of mechanical parameters with damage variables.

scholarly journals Strength and Failure Characteristics of Saturated Sandstone Under Loading and Unloading

2021 ◽  
Author(s):  
Zhenhua Zhang ◽  
Huayan Yao ◽  
Hongguo Li ◽  
Hanbin Bian ◽  
Dayong Zhu
Keyword(s):  
Failure Modes ◽  
Shear Failure ◽  
Water Saturation ◽  
Triaxial Compression ◽  
Axial Direction ◽  
Confining Pressure ◽  
Stress Path ◽  
Failure Characteristics ◽  
Dry Conditions ◽  
Unloading Confining Pressure

Abstract Water has effects on the strength and failure characteristics of the sandstone in natural environment. Conventional triaxial compressive or unloading confining pressure experiments were conducted on sandstone specimens. Experimental results indicate that the compressive strength of sandstone decreases significantly under saturated conditions in comparison with dry conditions, the strength parameters of saturated specimens under unloading confining pressure are also lower than those of dry rock samples; for the sandstone with the same water content, the strengths under triaxial unloading confining pressure is slightly higher than those under triaxial compressive condition; compared with the stress path of triaxial compression, the stress path of unloading confining pressure makes cracks propagate more easily along the axial direction, and the angle between fracture surface and axial direction is smaller. Under triaxial unloading confining pressure, there failure modes of dry sandstone are tension failure and shear failure, while that of saturated sandstone is mainly shear failure. In the process of water saturation, the bond and friction characteristics between grain particles are degraded due to water weakening the cementation between the grain particles and softening grains boundary, and the expansion of clay minerals in the sandstone, which leads to the decrease of macroscopic mechanical strengths.

Dependency of hydromechanical properties of monzonitic granite on confining pressure and fluid pressure under compression

2016 ◽  
Vol 30 (16) ◽  
pp. 1650086 ◽  
Author(s):  
Huanling Wang ◽  
Weiya Xu ◽  
Zaobao Lui ◽  
Zhiming Chao ◽  
Qingxiang Meng
Keyword(s):  
Failure Modes ◽  
Fluid Pressure ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Low Permeability ◽  
Failure Characteristics ◽  
Deformation Stages ◽  
Monzonitic Granite ◽  
Confining Pressures ◽  
Crack Damage Stress

Monzonitic granite is a low-permeability rock. Monzonitic granite formations are ideal for underground storage of oil due to their low permeability and high mechanical strength. In this study, a series of coupled hydromechanical triaxial tests are carried out using monzonitic granite specimens. The influence of confining and fluid pressures on stress, strain, and permeability is investigated. Failure characteristics under different confining and fluid pressures are discussed based on the analysis of macro fracture planes and micro scanning electron microscopy (SEM). The test results show that the change of permeability with stress and strain reflects the deformation stages of compaction, compression, crack propagation, coalesce, and failure of cracks. Due to the low porosity, the change of permeability is small in the initial phases of compaction and compression, whereas there is a significant increase in permeability when new cracks start to develop and coalesce. Confining pressures have a significant impact on the strength and permeability, particularly the crack damage stress of the rock. Compared with confining pressure, the effect of fluid pressure on rock strength and crack damage stress is small. For the monzonitic granite specimens tested, changing the confining pressure results in different failure modes, whereas the fluid pressure has a relatively small effect on the failure modes.

scholarly journals Experimental Study on the Effects of Stress Variations on the Permeability of Feldspar-Quartz Sandstone

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Fugang Wang ◽  
Zhaoxu Mi ◽  
Zhaojun Sun ◽  
Xufeng Li ◽  
Tianshan Lan ◽  
...  
Keyword(s):  
Injection Pressure ◽  
Confining Pressure ◽  
Repeated Loading ◽  
Micropore Structure ◽  
Injection Process ◽  
Reservoir Permeability ◽  
Stress Changes ◽  
Cyclic Variations ◽  
Loading And Unloading ◽  
Stress Variations

The multistage and discontinuous nature of the injection process used in the geological storage of CO2 causes reservoirs to experience repeated loading and unloading. The reservoir permeability changes caused by this phenomenon directly impact the CO2 injection process and the process of CO2 migration in the reservoirs. Through laboratory experiments, variations in the permeability of sandstone in the Liujiagou formation of the Ordos CO2 capture and storage (CCS) demonstration project were analyzed using cyclic variations in injection pressure and confining pressure and multistage loading and unloading. The variation in the micropore structure and its influence on the permeability were analyzed based on micropore structure tests. In addition, the effects of multiple stress changes on the permeability of the same type of rock with different clay minerals content were also analyzed. More attention should be devoted to the influence of pressure variations on permeability in evaluations of storage potential and studies of CO2 migration in reservoirs in CCS engineering.

A Review on Role of Aluminum Matrix Materials, Failure Causes and Optimization Techniques

2021 ◽  
Vol 6 (3) ◽  
pp. 1-11
Author(s):  
Tilahun Y ◽  
◽  
Mesfin G ◽  
Keyword(s):  
Failure Modes ◽  
Matrix Material ◽  
Aluminum Matrix ◽  
Ductile Failure ◽  
Failure Surface ◽  
Optimization Techniques ◽  
Alloy Matrix ◽  
Modes Of Failure ◽  
Causes Of Failure

Aluminum is a metal matrix material which is widely used in different industrial as well as engineering applications.it has a great advantage due to its remarkable properties like less density, formability, and light in weight, recyclability and other properties. but, failure of aluminum matrix materials are the main problems in aluminum industries now a days.in this review role of aluminum and its alloys as matrix materials, their failure modes, causes of failure and optimization techniques to minimize this failure modes and causes of failure are discussed. Sources are reviewed which are from 2005 to recent one. Consequently, most modes of failure, causes of failure and most optimization techniques of aluminum and its alloy matrix materials are found. most modes of failure are mechanical related like fatigue failure, surface cracking, ductile failure, porosity formation, and stress related like stress corrosion cracking, surface weakness due to repeated stresses and other factors are summarized.in causes of failure mostly like corrosion formation, wear formation and poor mechanical properties are discussed.

Stress-Strain Relationship for Steel under Uniaxial Cyclic Loadings

2002 ◽  
Vol 5 (3) ◽  
pp. 143-151 ◽  
Author(s):  
Luís Calado ◽  
António Brito
Keyword(s):  
Complex Loading ◽  
Steel Structures ◽  
General Purpose ◽  
Loading Conditions ◽  
Stress Strain ◽  
Strain Relationship ◽  
Complete Failure ◽  
Loading Tests ◽  
Cyclic Loading Tests ◽  
Mathematical Relationships

The mechanical properties of steel in the inelastic range can generally be described by mathematical relationships. Many such constitutive relationships have been validated by static or uniaxial cyclic loading tests. Very few models have been substantiated by test results under complex loading conditions. For that reason, the implementation of such models in general purpose structural analysis programs for steel structures under seismic actions, is in some cases complex and in others impossible. This paper is concerned with a uniaxial non-linear model for structural steel under complex loading condition and with damage accumulation. The Giuffré, Menegoto and Pinto model was taken as a basis for the development of this model. The accuracy of the proposed numerical model was drawn with uniaxial cyclic experiments. Some numerical simulations are presented in order to illustrate the capabilities of the model for use as a stress-strain relationship for steel under uniaxial complex loading conditions up to the complete failure of the material.

Sign in / Sign up

Export Citation Format

Share Document