scholarly journals Active Power Management for PV Systems under High Penetration Scenario

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Fernando Medina ◽  
Nimrod Vazquez ◽  
Joaquín Vaquero ◽  
Jaime Arau ◽  
Leonel Estrada ◽  
...  
Keyword(s):  
Power Management ◽  
Power Flow ◽  
Active Power ◽  
Pv System ◽  
Voltage Fluctuations ◽  
Voltage Standard ◽  
Grid Voltage ◽  
Pv Systems ◽  
Point Tracking ◽  
High Penetration

Although PV systems are one of the most widely used alternatives as a renewable energy source due to their well-known advantages, there are significant challenges to address related to voltage fluctuations and reverse power flow caused by high PV penetration scenarios. As a potential solution to this problem, an active power management strategy is proposed in this work using a residential cluster as a benchmark. The proposed strategy is analyzed and experimentally verified, offering a simple way to reduce the voltage fluctuations by regulating the active power delivered by the PV system, achieving also relevant functionalities for the system, such as the regulation of the DC bus voltage, maximum power point tracking (MPPT), synchronization with the grid voltage, detection of high penetration conditions, and a simple strategy for the main controller with an effective performance. The proposal system shows satisfactory results being able to maintain grid voltage fluctuations within the voltage standard specifications.

Analysis of Power Grid Voltage Stability with High Penetration of Solar PV Systems

2021 ◽  
pp. 1-1
Author(s):  
Sharmin Rahman ◽  
Sajeeb Saha ◽  
Shama Naz Islam ◽  
M Arif ◽  
Mehdi Mosadeghy ◽  
...  
Keyword(s):  
Voltage Stability ◽  
Power Grid ◽  
Solar Pv ◽  
Grid Voltage ◽  
Pv Systems ◽  
High Penetration

scholarly journals Analysis and Design of a Multi-Port DC-DC Converter for Interfacing PV Systems

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1943
Author(s):  
Bader N. Alajmi ◽  
Mostafa I. Marei ◽  
Ibrahim Abdelsalam ◽  
Mohamed F. AlHajri
Keyword(s):  
High Frequency ◽  
Computer Aided Design ◽  
Electromagnetic Transients ◽  
Pv System ◽  
Analysis And Design ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point ◽  
Aided Design

A high-frequency multi-port (HFMP) direct current (DC) to DC converter is presented. The proposed HFMP is utilized to interface a photovoltaic (PV) system. The presented HFMP is compact and can perform maximum power point tracking. It consists of a high-frequency transformer with many identical input windings and one output winding. Each input winding is connected to a PV module through an H-bridge inverter, and the maximum PV power is tracked using the perturb and observe (P&O) technique. The output winding is connected to a DC bus through a rectifier. The detailed analysis and operation of the proposed HFMP DC-DC converter are presented. Extensive numerical simulations are conducted, using power system computer aided design (PSCAD)/electromagnetic transients including DC (EMTDC) software, to evaluate the operation and dynamic behavior of the proposed PV interfacing scheme. In addition, an experimental setup is built to verify the performance of the HFMP DC-DC converter.

scholarly journals An Optimized PV Control System Based on the Emperor Penguin Optimizer

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 751
Author(s):  
Mariam A. Sameh ◽  
Mostafa I. Marei ◽  
M. A. Badr ◽  
Mahmoud A. Attia
Keyword(s):  
Duty Cycle ◽  
Optimization Technique ◽  
Pso Algorithm ◽  
Boost Converter ◽  
Emperor Penguin ◽  
Pv System ◽  
Partial Shading ◽  
Pv Systems ◽  
Point Tracking ◽  
Grid Connected Inverter

During the day, photovoltaic (PV) systems are exposed to different sunlight conditions in addition to partial shading (PS). Accordingly, maximum power point tracking (MPPT) techniques have become essential for PV systems to secure harvesting the maximum possible power from the PV modules. In this paper, optimized control is performed through the application of relatively newly developed optimization algorithms to PV systems under Partial Shading (PS) conditions. The initial value of the duty cycle of the boost converter is optimized for maximizing the amount of power extracted from the PV arrays. The emperor penguin optimizer (EPO) is proposed not only to optimize the initial setting of duty cycle but to tune the gains of controllers used for the boost converter and the grid-connected inverter of the PV system. In addition, the performance of the proposed system based on the EPO algorithm is compared with another newly developed optimization technique based on the cuttlefish algorithm (CFA). Moreover, particle swarm optimization (PSO) algorithm is used as a reference algorithm to compare results with both EPO and CFA. PSO is chosen since it is an old, well-tested, and effective algorithm. For the evaluation of performance of the proposed PV system using the proposed algorithms under different PS conditions, results are recorded and introduced.

scholarly journals A Modification of the Perturb and Observe Method to Improve the Energy Harvesting of PV Systems under Partial Shading Conditions

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2521
Author(s):  
Alfredo Gil-Velasco ◽  
Carlos Aguilar-Castillo
Keyword(s):  
Maximum Power ◽  
Global Maximum ◽  
Pv System ◽  
Maximum Power Point ◽  
Partial Shading ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point ◽  
Computational Resources

There are multiples conditions that lead to partial shading conditions (PSC) in photovoltaic systems (PV). Under these conditions, the harvested energy decreases in the PV system. The maximum power point tracking (MPPT) controller aims to harvest the greatest amount of energy even under partial shading conditions. The simplest available MPPT algorithms fail on PSC, whereas the complex ones are effective but require high computational resources and experience in this type of systems. This paper presents a new MPPT algorithm that is simple but effective in tracking the global maximum power point even in PSC. The simulation and experimental results show excellent performance of the proposed algorithm. Additionally, a comparison with a previously proposed algorithm is presented. The comparison shows that the proposal in this paper is faster in tracking the maximum power point than complex algorithms.

Maximum Power Point Tracking (MPPT) for a Solar Photovoltaic System: A Review

2015 ◽  
Vol 787 ◽  
pp. 227-232 ◽  
Author(s):  
L.A. Arun Shravan ◽  
D. Ebenezer
Keyword(s):  
Solar Energy ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Nonlinear Behaviour ◽  
Pv System ◽  
Maximum Power Point ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

In recent years there has been a growing attention towards use of solar energy. Advantages of photovoltaic (PV) systems employed for harnessing solar energy are reduction of greenhouse gas emission, low maintenance costs, fewer limitations with regard to site of installation and absence of mechanical noise arising from moving parts. However, PV systems suffer from relatively low conversion efficiency. Therefore, maximum power point tracking (MPPT) for the solar array is essential in a PV system. The nonlinear behaviour of PV systems as well as variations of the maximum power point with solar irradiance level and temperature complicates the tracking of the maximum power point. This paper reviews various MPPT methods based on three categories: offline, online and hybrid methods. Design of a PV system in a encoding environment has also been reviewed here. Furthermore, different MPPT methods are discussed in terms of the dynamic response of the PV system to variations in temperature and irradiance, attainable efficiency, and implementation considerations.

Maximum Power Point Tracking of Multi-String Photovoltaic Array via Simultaneous Perturbation Stochastic Approximation

2013 ◽  
Author(s):  
Yan Xiao ◽  
Yaoyu Li ◽  
John E. Seem ◽  
Kaushik Rajashekara
Keyword(s):  
Stochastic Approximation ◽  
Maximum Power Point Tracking ◽  
Maximum Power ◽  
Pv System ◽  
Maximum Power Point ◽  
Simultaneous Perturbation Stochastic Approximation ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point

This paper presents a Maximum Power Point Tracking (MPPT) strategy for multi-string photovoltaic (PV) systems using the Simultaneous Perturbation Stochastic Approximation (SPSA) algorithm. The multi-string PV system considered is a decentralized control configuration, controlling the voltage reference to each PV module but based on the feedback of the total power at the DC bus. This requires only one pair of voltage and current measurements. The MPPT control problem for such topology of multi-string PV systems features a high input dimension, which can dramatically slow down the searching process for the real-time optimization process involved. The SPSA algorithm is considered in this study due to its remarkable capability of fast convergence for high dimensional search problems endorsed by various applications recently. Simulation study is performed for an 8-string PV system, and experimental study is performed for a 4-string PV system. Good performances are observed for both simulation and experimental results.

scholarly journals Proposing an Ontology Model for Planning Photovoltaic Systems

2021 ◽  
Vol 3 (3) ◽  
pp. 582-600
Author(s):  
Farhad Khosrojerdi ◽  
Stéphane Gagnon ◽  
Raul Valverde
Keyword(s):  
Solar Energy ◽  
Semantic Web ◽  
Relevant Information ◽  
Pv System ◽  
Semantic Web Technologies ◽  
Pv Systems ◽  
Knowledge Based ◽  
Point Tracking ◽  
Power Point ◽  
Energy Community

The performance of a photovoltaic (PV) system is negatively affected when operating under shading conditions. Maximum power point tracking (MPPT) systems are used to overcome this hurdle. Designing an efficient MPPT-based controller requires knowledge about power conversion in PV systems. However, it is difficult for nontechnical solar energy consumers to define different parameters of the controller and deal with distinct sources of data related to the planning. Semantic Web technologies enable us to improve knowledge representation, sharing, and reusing of relevant information generated by various sources. In this work, we propose a knowledge-based model representing key concepts associated with an MPPT-based controller. The model is featured with Semantic Web Rule Language (SWRL), allowing the system planner to extract information about power reductions caused by snow and several airborne particles. The proposed ontology, named MPPT-On, is validated through a case study designed by the System Advisor Model (SAM). It acts as a decision support system and facilitate the process of planning PV projects for non-technical practitioners. Moreover, the presented rule-based system can be reused and shared among the solar energy community to adjust the power estimations reported by PV planning tools especially for snowy months and polluted environments.

scholarly journals Modeling, Control and Power Management Strategy of a Grid connected Hybrid Energy System

2018 ◽  
Vol 8 (3) ◽  
pp. 1345 ◽  
Author(s):  
Sujit Kumar Bhuyan ◽  
Prakash Kumar Hota ◽  
Bhagabat Panda
Keyword(s):  
Fuel Cell ◽  
Power Management ◽  
Storage Tank ◽  
Power Flow ◽  
Management Strategies ◽  
Energy System ◽  
Pv System ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Load Demand

This paper presents the detailed modeling of various components of a grid connected hybrid energy system (HES) consisting of a photovoltaic (PV) system, a solid oxide fuel cell (SOFC), an electrolyzer and a hydrogen storage tank with a power flow controller. Also, a valve controlled by the proposed controller decides how much amount of fuel is consumed by fuel cell according to the load demand. In this paper fuel cell is used instead of battery bank because fuel cell is free from pollution. The control and power management strategies are also developed. When the PV power is sufficient then it can fulfill the load demand as well as feeds the extra power to the electrolyzer. By using the electrolyzer, the hydrogen is generated from the water and stored in storage tank and this hydrogen act as a fuel to SOFC. If the availability of the power from the PV system cannot fulfill the load demand, then the fuel cell fulfills the required load demand. The SOFC takes required amount of hydrogen as fuel, which is controlled by the PID controller through a valve. Effectiveness of this technology is verified by the help of computer simulations in MATLAB/SIMULINK environment under various loading conditions and promising results are obtained.

scholarly journals Techno-Economic Analysis of a Residential PV-Storage Model in a Distribution Network

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3062 ◽  
Author(s):  
Xiong ◽  
Nour
Keyword(s):  
Energy Storage ◽  
Distribution Networks ◽  
Point Of View ◽  
Local Data ◽  
Pv System ◽  
Battery System ◽  
Pv Systems ◽  
High Penetration ◽  
Harmonic Components ◽  
Pv Generation

The high penetration level of photovoltaic (PV) generation in distribution networks not only brings benefits like carbon savings, but also induces undesirable outcomes, like more harmonic components and voltage fluctuations. Driven by decreasing costs of energy storage, the focus of this paper is to investigate the feasibility of applying energy storage in the grid-connected PV system to mitigate its intermittency. Firstly, to appreciate the functionality of storage, a generic PV-battery-supercapacitor model was simulated in MATLAB/Simulink, and a flat load profile was obtained to enhance predictability from the network management point of view. However, the usage of supercapacitors at the residential level is limited, due to its high startup costs. Secondly, a detailed residential PV-battery model was implemented in the System Advisor Model (SAM) based on local data in Dubai. The optimal sizing of a battery system was determined by assessing two criteria: The number of excursions, and average target power, which are contradictory in optimization process. Statistical indicators show that a properly sized battery system can alleviate network fluctuations. The proposed sizing method can be also applied to other PV-storage systems. Finally, economic studies of PV-battery system demonstrated its competitiveness against standalone PV systems under appropriate tariff incentives.

Sign in / Sign up

Export Citation Format

Share Document