scholarly journals Numerical Analysis for the Caving Characteristics of Rock Mass with Inclined Joints in Caving Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Jinbo Sui ◽  
Fengyu Ren ◽  
Jianli Cao ◽  
Huan Liu
Keyword(s):  
Rock Mass ◽  
Stress Concentration ◽  
Model Parameters ◽  
Joint System ◽  
Initiation And Propagation ◽  
Geological Conditions ◽  
Synthetic Rock ◽  
Iron Mine ◽  
Crack Zone ◽  
Joint Length

In caving mining, the successful initiation and propagation of caving require one low-dip joint set. However, not every mine has a low-dip joint set. The Hemushan Iron Mine in China was taken as the engineering background, and the caving characteristics of rock mass with inclined joints were analyzed based on the synthetic rock mass (SRM) model. First, the inclined joints were investigated in the Hemushan Iron Mine. Second, model parameters were determined based on the geological conditions of the mine, and seven models were established. Third, the caving process was simulated, and caving characteristics were monitored. For rock mass with inclined joints after undercutting, the research showed that the crack zone was significant, and the crack zone existed not only around the undercut area but also further away in the model. The stress concentration areas dispersed in the model except for the top of the undercut area. The caving line was not a standard arch, and the highest point of the caving line was biased towards the direction of the undercut. Under the same undercut width, with the decrease of joint length in the joint system, the number of cracks decreased, the degree of stress concentration became weaker, and the height of the caving line decreased.

scholarly journals Study on the Deformation Mechanism of Soft Rock Roadway under Blasting Disturbance in Baoguo Iron Mine

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Hong-di Jing ◽  
Yuan-hui Li ◽  
Kun-meng Li
Keyword(s):  
Rock Mass ◽  
Deformation Mechanism ◽  
Soft Rock ◽  
Deformation Monitoring ◽  
Underground Mines ◽  
Blasting Vibration ◽  
Iron Mine ◽  
The Stability ◽  
Soft Rock Roadway ◽  
Rock Roadway

In order to study the deformation mechanism of soft rock roadway in underground mines, it is necessary not only to study the influence of the dynamic disturbance caused by the cyclic mining blasting vibration on the stability of the soft rock roadway but also to study the degradation of the roadway surrounding rock itself and other factors. The paper presented a synthetic research system to investigate the factors that influence roadway rock structure deterioration in Baoguo Iron Mine. Firstly, the stability of rock mass was analyzed from the perspective of the physical and structural characteristics of the rock mass. Afterwards, according to monitoring data of mining blasting vibration, a suitable safety blasting prediction model for Baoguo Iron Mine was determined. And then, combining the results of mining blasting vibration monitoring and deformation monitoring, the effect of cyclic mining blasting on the stability of the soft rock roadway was obtained. By systematically studying the intrinsic factors of rock quality degradation and external environmental disturbances and their interactions, this paper comprehensively explores the deformation mechanism of soft rock roadway and provides the support for fundamentally solving the large deformation problems of soft rock roadway in underground mines.

Precise grading of surrounding rock based on the numerical calculation of the jointed rock mass

2022 ◽  
pp. 1-32
Author(s):  
Dan Huang ◽  
Xiao-Qing Li ◽  
Wen-Chao Song
Keyword(s):  
Rock Mass ◽  
Numerical Calculation ◽  
Calculation Method ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Surrounding Rock ◽  
Geological Survey ◽  
Survey Method ◽  
Synthetic Rock ◽  
Numerical Calculation Method

In this study, grading of surrounding rock was based on rock mass basic quality (BQ) values according to the specifications in China. Numerical approach was to construct synthetic rock mass (SRM) model to represent the jointed rock mass, and obtain the strength of the rock mass. It represented intact rock by the bonded particle model (BPM), and represent joint behaviour by the smooth joint model (SJM) to construct the discrete fracture network (DFN). In the Hongtuzhang Tunnel, the micro properties of granite cores with different weathered degrees were determined by the validation process, and the calculation representative elementary volume (REV) of surrounding rock was 15 m×15 m. Five slightly weathered, three slightly to moderately weathered, and two moderately weathered granite surrounding rock mass models were established based on the probability distribution of joint sets in each borehole, the conversion BQ value was acquired according by the calculated strength of rock mass model. It was discussed the differences of surrounding rock grades between the geological survey method and the numerical calculation method, and then found that the geological survey report is higher than the numerical calculation method predicted. And the numerical calculation is consistent with the actual excavation of rock mass at borehole A1388.

Research on Number of High-Pressure Grouting of Hierarchical Multiple for Slope Based on Reliability Analysis

2014 ◽  
Vol 716-717 ◽  
pp. 363-369
Author(s):  
Zhen Hua Xie ◽  
Dong Yang ◽  
Sha Sha Liang ◽  
Zhi Yun Jia
Keyword(s):  
High Pressure ◽  
Rock Mass ◽  
System Analysis ◽  
Rock Surface ◽  
Rock Permeability ◽  
Iron Mine ◽  
Probability Calculation ◽  
Before And After ◽  
Pressure Grouting ◽  
First Time

The technology of hierarchical multiple high-pressure grouting is an effective approach to manage high and steep slope of broken rock mass. The number of grouting is one of the key parameters of this technology. By the analysis of mechanics and grouting theory, the anchoring effect mainly is affected by anchor slurry vein and the contact area with rock mass. Based on the system analysis of slurry vein development for first time and many times high-pressure grouting, the process flow for hierarchical multiple high-pressure grouting is put forward. Serve the rock permeability changes before and after grouting as an indicator measuring slurry and rock surface area, the method of determining grouting number based on the reliable probability is got. Combined with the engineering example of Shouyun Iron Mine, this paper puts forward the reliability criteria of working state of hierarchical multiple high-pressure grouting. Through the probability calculation, the best number of grouting is 4 times. The tests of permeability of rock mass and drawing force verify the accuracy of this determination method.

scholarly journals Substantiation of Safe Conditions During Undermining of Hydraulic Waste Disposal

2018 ◽  
Vol 41 ◽  
pp. 01007
Author(s):  
Yuriy Kutepov ◽  
Aleksandr Mironov ◽  
Maksim Sablin ◽  
Elena Borger
Keyword(s):  
Rock Mass ◽  
Waste Disposal ◽  
Coal Mine ◽  
Water Body ◽  
Water Inflow ◽  
Open Pit ◽  
Coal Seams ◽  
Geological Conditions ◽  
Mine Workings ◽  
Mine Dump

This article considers mining and geological conditions of the site “Blagodatny” of the mine named after A.D. Ruban located underneaththe old open pit coal mine and the hydraulic-mine dump. The potentially dangerous zones in the undermined rock mass have been identified based onthe conditions of formation of water inflow into mine workings. Safe depthof coal seams mining has been calculated depending on the type of water body – the hydraulic-mine dump.

scholarly journals Recrystallization of ice enhances the creep and vulnerability to fracture of ice shelves 

2021 ◽  
Author(s):  
Meghana Ranganathan ◽  
Brent Minchew ◽  
Colin Meyer ◽  
Matej Pec
Keyword(s):  
Grain Size ◽  
Ice Sheet ◽  
Shear Zones ◽  
Dislocation Creep ◽  
Model Parameters ◽  
Localized Deformation ◽  
Ice Shelves ◽  
Fine Grained ◽  
Initiation And Propagation ◽  
Rapid Deformation

<p>The initiation and propagation of fractures in floating regions of Antarctica has the potential to destabilize large regions of the ice sheet, leading to significant sea-level rise. While observations have shown rapid, localized deformation and damage in the margins of fast-flowing glaciers, there remain gaps in our understanding of how rapid deformation affects the creep and toughness of ice. Here we derive a model for dynamic recrystallization in ice and other rocks that includes a novel representation of migration recrystallization, which is absent from existing models but is likely to be dominant in warm areas undergoing rapid deformation within the ice sheet. We show that, in regions of elevated strain rate, grain sizes in ice may be larger than expected (~15 mm) due to migration recrystallization, a significant deviation from solid earth studies which find fine-grained rock in shear zones. This may imply that ice in shear margins deforms primarily by dislocation creep, suggesting a flow-law exponent of n=4 in these regions. Further, we find from existing models that this increase in grain size results in a decrease in tensile strength of ice by ~75% in the margins of glaciers. Thus, we expect that this increase in grain size makes the margins of fast-flowing glaciers less viscous and more vulnerable to fracture than we may suppose from standard model parameters.</p>

scholarly journals Analysis of rock mass dynamic impact influence on the operation of a powered roof support control system

2018 ◽  
Vol 29 ◽  
pp. 00006 ◽  
Author(s):  
Dawid Szurgacz ◽  
Jaroław Brodny
Keyword(s):  
Rock Mass ◽  
Real Life ◽  
High Energy ◽  
Hard Coal ◽  
Underground Excavation ◽  
Dynamic Impact ◽  
Support Unit ◽  
Geological Conditions ◽  
Innovative Solutions ◽  
Roof Support

A powered roof support is a machine responsible for protection of an underground excavation against deformation generated by rock mass. In the case of dynamic impact of rock mass, the proper level of protection is hard to achieve. Therefore, the units of the roof support and its components are subject to detailed tests aimed at acquiring greater reliability, efficiency and efficacy. In the course of such test, however, it is not always possible to foresee values of load that may occur in actual conditions. The article presents a case of a dynamic load impacting the powered roof support during a high-energy tremor in an underground hard coal mine. The authors discuss the method for selecting powered roof support units proper for specific forecasted load conditions. The method takes into account the construction of the support and mining and geological conditions of an excavation. Moreover, the paper includes tests carried out on hydraulic legs and yield valves which were responsible for additional yielding of the support. Real loads impacting the support unit during tremors are analysed. The results indicated that the real registered values of the load were significantly greater than the forecasted values. The analysis results of roof support operation during dynamic impact generated by the rock mass (real life conditions) prompted the authors to develop a set of recommendations for manufacturers and users of powered roof supports. These include, inter alia, the need for innovative solutions for testing hydraulic section systems.

scholarly journals Deformation Characteristics and Control Method of Kilometer-Depth Roadways in a Nickel Mine: A Case Study

2020 ◽  
Vol 10 (11) ◽  
pp. 3937
Author(s):  
Guang Li ◽  
Fengshan Ma ◽  
Jie Guo ◽  
Haijun Zhao
Keyword(s):  
Rock Mass ◽  
Failure Modes ◽  
Control Method ◽  
Steel Tube ◽  
In Situ Monitoring ◽  
Zonal Disintegration ◽  
Deformation Characteristics ◽  
Geological Conditions ◽  
Ground Stress

Deformation failure and support methods of roadways have always been critical issues in mining production and safety, especially for roadways buried in complex engineering geological conditions. To resolve these support issues of kilometer-depth roadways under high ground stress and broken rock mass, a case study on the roadways in the No. 2 mining area of Jinchuan Mine, China, is presented in this paper. Based on a detailed field survey, the deformation characteristics of the roadways and failure modes of supporting structures were investigated. It was found that the horizontal deformations were serious, and the primary support was not able to control the surrounding rock well. Additionally, a broken rock zone test was carried out, which indicated that a zonal disintegration phenomenon occurred around the roadways and the maximum depth of the fractured zone was more than 4.8 m. In order to effectively limit the deformation in the roadways, a new support scheme called the “multistage anchorage + concrete-filled steel tube” was put forward. To further assess the support behavior of the new method, we selected a test roadway in the research area, and numerical simulations and in-situ monitoring were conducted. The findings suggest that the roadway’s serious deformation under high ground stress and broken rock mass could be successfully controlled by the new control method, which can provide a reference for other engineering solutions under similar geological conditions.

scholarly journals Key Factors Affecting the Deformation and Failure of Surrounding Rock Masses in Large-Scale Underground Powerhouses

2020 ◽  
Vol 2020 ◽  
pp. 1-20
Author(s):  
Meng Wang ◽  
Jia-wen Zhou ◽  
An-chi Shi ◽  
Jin-qi Han ◽  
Hai-bo Li
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Surrounding Rock ◽  
Rock Masses ◽  
Affecting Factors ◽  
Key Factors ◽  
Underground Powerhouse ◽  
Deformation And Failure ◽  
Factors Affecting ◽  
Geological Conditions

The stability of the surrounding rock masses of underground powerhouses is always emphasized during the construction period. With the general trends toward large-scale, complex geological conditions and the rapid construction progress of underground powerhouses, deformation and failure issues of the surrounding rock mass can emerge, putting the safety of construction and operation in jeopardy and causing enormous economic loss. To solve these problems, an understanding of the origins and key affecting factors is required. Based on domestic large-scale underground powerhouse cases in the past two decades, key factors affecting the deformation and failure of the surrounding rock mass are summarized in this paper. Among these factors, the two most fundamental factors are the rock mass properties and in situ stress, which impart tremendous impacts on surrounding rock mass stability in a number of cases. Excavation is a prerequisite of surrounding rock mass failure and support that is classified as part of the construction process and plays a pivotal role in preventing and arresting deformation and failure. Additionally, the layout and structure of the powerhouse are consequential. The interrelation and interaction of these factors are discussed at the end of this paper. The results can hopefully advance the understanding of the deformation and failure of surrounding rock masses and provide a reference for design and construction with respect to hydroelectric underground powerhouses.

Sign in / Sign up

Export Citation Format

Share Document