scholarly journals Profiling of Indigenous Biosurfactant-Producing Bacillus Isolates in the Bioremediation of Soil Contaminated by Petroleum Products and Olive Oil

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Paola Sandra Elenga-Wilson ◽  
Christian Aimé Kayath ◽  
Nicaise Saturnin Mokemiabeka ◽  
Stech Anomene Eckzechel Nzaou ◽  
Etienne Nguimbi ◽  
...  

Petroleum is, up to this date, an inimitable nonrenewable energy resource. Petroleum leakage, which arises during transport, storage, and refining, is the most important contaminant in the environment, as it produces harm to the surrounding ecosystem. Bioremediation is an efficient method used to treat petroleum hydrocarbon-contaminated soil using indigenous microorganisms. The degradation characteristics for a variety of hydrocarbons (hexane, benzene, gasoline, and diesel) were qualitatively and quantitatively investigated using Bacillus isolates. Microbiological and biochemical methods have been used including isolation of oil-degrading bacteria, enzymatic activities, the determination of physicochemical parameters, biosurfactant production and extraction assay, oil displacement assay, antimicrobial assay of the biosurfactants, and bioremediation kinetics. Consequently, of the 60 isolates capable of degrading different hydrocarbons at fast rates, 34 were suspected to be Bacillus isolates capable of growing in 24 h or 48 h on BH medium supplemented with 2% of hexane, benzene, gasoline, diesel, and olive oil, respectively. Among the 34 isolates, 61% (21/34) are capable of producing biosurfactant-like molecules by using gasoline, 70% (24/34) with diesel oil, 85% (29/34) with hexane, and 82% (28/34) with benzene. It was found that biosurfactant-producing isolates are extractable with HCl (100%), ammonium sulphate (95%), chloroform (95%), and ethanol (100%). Biosurfactants showed stability at 20°C, 37°C, 40°C, and 60°C. Biosurfactant secreted by Bacillus strains has shown an antagonistic effect in Escherichia coli, Shigella flexneri 5a M90T, and Bacillus cereus. The selected isolates could therefore be safely used for biodegradation. Substrate biodegradation patterns by individual isolates were found to significantly differ. The study shows that benzene was degraded faster, followed by hexane, gasoline, and finally diesel. The Bacillus consortium used can decrease hydrocarbon content from 195 to 112 (g/kg) in 15 days.

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.


2011 ◽  
Vol 3 (1) ◽  
Author(s):  
Lies Indah Sutiknowati

There is an information how to identify hydrocarbon degrading bacteria for bioremediation of marine oil spill. We have Bioremediation treatment for degradation of oil spill on Pari island and need two kind of experiment there are tanks experiment (sampling 0 to 90 days) and semi enclosed system (sampling 0 to 150 days). Biostimulation with nutrients (N and P) was done to analyze biodegradation of hydrocarbon compounds. Experiment design using fertilizer Super IB and Linstar will stimulate bacteria can degrade oil, n-alkane, and alkane as poly aromatic hydrocarbon. The bacteria communities were monitored and analyzed by Denaturing Gradient Gel Electrophoresis (DGGE) and Clone Library; oil chemistry was analyzed by Gas Chromatography Mass Spectrometry (GCMS). DNA (deoxyribonucleic acid) was extracted from colonies of bacteria and sequence determination of the 16S rDNA was amplified by primers U515f and U1492r. Strains had been sequence and had similarity about 90-99% to their closest taxa by homology Blast search and few of them suspected as new species. The results showed that fertilizers gave a significant effect on alkane, PAH and oil degradation in tanks experiment but not in the field test. Dominant of the specific bacteria on this experiment were Alcanivorax, Marinobacter and Prosthecochloris. Keywords: Bioremediation, Biostimulation, DGGE, PAH, Pari Island


Sign in / Sign up

Export Citation Format

Share Document