scholarly journals An Experimental Investigation on the Mechanical Properties including Strength and Flexural Toughness of Mortar Reinforced with Steel-Carbon Hybrid Fibers

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Gwang-Hee Heo ◽  
Jong-Gun Park ◽  
Dong-Ju Seo ◽  
Hyung-Min Jun ◽  
Sung-Gon Koh
Keyword(s):  
Mechanical Properties ◽  
Experimental Investigation ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Volume Fraction ◽  
Test Method ◽  
Steel Fibers ◽  
Cement Matrix ◽  
Hybrid Fibers ◽  
Flexural Toughness

This paper presents the results of an experimental investigation conducted to evaluate the mechanical properties, including strength and flexural toughness of hybrid fiber-reinforced mortar (FRM) containing various combinations of steel and carbon fibers with different material characteristics. The mortar specimens were mixed with steel and carbon fibers in the mix proportions of 100 + 0%, 75 + 25%, 50 + 50%, 25 + 75%, and 0 + 100% by volume at a total volume fraction of 1.0%. The flexural performance (flexural strength and toughness) of the mortar specimens was obtained using the third-point loading arrangement stipulated in the test methods of ASTM C 1609/C 1609/M and KS F 2566. In addition, compressive strength was also measured according to the KS F ISO 679 test method. Their mechanical properties were examined and compared with plain mortar (PM) at the age of 28 days. The test results showed the highest compressive and flexural strengths in the hybrid FRM reinforced with 75% steel fibers + 25% carbon fibers, confirming the synergistic reinforcing effect of the steel and carbon hybrid fibers. However, the hybrid FRM reinforced with 50% steel fibers + 50% carbon fibers has obtained slightly low flexural strength but owned the highest flexural toughness and hence can be judged as the most appropriate combination to be employed in hybrid FRM to improve the flexural toughness. Moreover, the fractured FRM surface was also observed via scanning electron microscopy (SEM) after platinum coating in vacuum. These results would be of great help in establishing the microstructural mechanism of hybrid reinforcing fibers in the cement matrix.

scholarly journals Experimental study on high temperature mechanical properties of aluminate cement mortar mixed with fiber

2021 ◽  
Vol 25 (6 Part B) ◽  
pp. 4441-4448
Author(s):  
Ping Xu ◽  
Dong Han ◽  
Jian-Xin Yu ◽  
Yu-Hao Cui ◽  
Min-Xia Zhang
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Cement Mortar ◽  
Steel Fibers ◽  
Basalt Fibers ◽  
High Temperature Mechanical Properties ◽  
Micro Structures ◽  
Aluminate Cement

The aim of the present paper is to study the mechanical properties of aluminate cement mortar mixed with different chopped fibers under high temperature. The specimens with a size of 40 mm ? 40 mm ? 160 mm is treated at various tempera?tures of 25?C, 200?C, 400?C, 600?C, and 800?C. The compressive and flexural strength of the aluminate cement mortar and its micro-structures are tested. The results show that the chopped steel fibers and basalt fibers are effective in improv?ing the high temperature mechanical properties of aluminate cement mortar. When the volume fraction of chopped steel fibers is 2%, the compressive strength and flexural strength of the test block treated at the temperature of 800?C increase by 18.3% and 128.6%, respectively.

scholarly journals Investigation on the Mechanical Properties of Fiber Reinforced Recycled Concrete

2016 ◽  
Vol 2 (1) ◽  
pp. 13-22 ◽  
Author(s):  
Hasan Jalilifar ◽  
Fatholla Sajedi ◽  
Sadegh Kazemi
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Experimental Test ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Content ◽  
Recycled Concrete ◽  
Test Results ◽  
Fiber Volume ◽  
Flexural Toughness

The flexural strength of conventional concrete material is known to be enhanced by incorporating a moderate volume-fraction of randomly distributed fibers. However, there is limited information on describing the influence of fiber volume-fraction on the compressive and flexural strength of recycled coarse aggregate concrete (RCA-C) material. This paper reports on experimental test results of the RCA-C material replaced with 0, 30, 50 and 100% recycled aggregate and 0, 0.5, 1 and 1.5% steel fiber volume fraction. Three-point flexural tests of notched prism specimens were completed. The mechanical properties in compression were characterized using cube specimens. Significant improvement in compressive and flexural strength of RCA-C was found as fiber content increased from 0 to 1.5%. The experimental test results of RCA-C were further evaluated to investigate the influence of fiber content on flexural toughness. According to test results, the addition of steel fibers to RCA-C material appreciably increased the flexural toughness.

scholarly journals Mechanical properties and microstructure of recycled mortar reinforced with hybrid fiber

2018 ◽  
Vol 7 (4) ◽  
pp. 2178 ◽  
Author(s):  
Sallehan Ismail ◽  
Mohammad Asri Abd Hamid ◽  
Zaiton Yaacob ◽  
Dzulkarnaen Ismail ◽  
Hazizan Md Akil
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Mechanical Strength ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
High Strength ◽  
Strength Properties ◽  
Recycled Aggregate ◽  
Hybrid Fiber ◽  
Hybrid Fibers

This study investigated the hybrid effects of two types of microfiber, namely, polypropylene and nylon, on the mechanical properties of high-strength mortar, which produced fine recycled aggregate (FRA). The amount of microfibers was maintained at a volumetric fraction of 0.6%. The microstructure and mechanical strength properties (compressive strength and flexural strength) of recycled mortar reinforced with hybrid-size microfibers were evaluated at various curing ages. Experimental results show that the inclusion of hybrid fibers significantly influenced the mechanical performance of the recycled mortar. The hybridization fiber at volume fraction 0.3% polypropylene + 0.3% nylon yielded the most promising mechanical performance. Enhancements of 8% on compressive and 11% flexural strength were achieved at 28 days. Scanning electron microscopy observations revealed that reinforcement at the microscale prohibited the initiation and growth of cracks at the micro level. High loads were required to form macrocracks within composites, thereby improving the mechanical strength of the mortar matrix.  

scholarly journals Mechanical Properties of SiO2-Coated Carbon Fiber-Reinforced Mortar Composites with Different Fiber Lengths and Fiber Volume Fractions

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Gwang-Hee Heo ◽  
Jong-Gun Park ◽  
Ki-Chang Song ◽  
Jong-Ho Park ◽  
Hyung-Min Jun
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Cement Matrix ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Volume Fractions ◽  
Carbon Fiber Reinforced ◽  
Coated Carbon

In the present study, SiO2 particles were coated on the surface of carbon fibers by means of chemical reaction of silane coupling agent (glycidoxypropyl trimethoxysilane, GPTMS) and colloidal SiO2 sol to improve the interfacial bonding force between fibers and matrix in cement matrix. The surface of the modified carbon fibers was confirmed through a scanning electron microscope (SEM). The mechanical properties of SiO2-coated carbon fiber mortar and uncoated carbon fiber mortar with different fiber lengths (6 mm and 12 mm) and fiber volume fractions (0.5%, 1.0%, 1.5%, and 2.0%) were compared and analyzed. The experimental results show that the flow values of the carbon fiber mortar were greatly disadvantageous in terms of fluidity due to the nonhydrophilicity of fibers and fiber balls, and the unit weight decreased significantly as the fiber volume fractions increased. However, the air content increased more or less. In addition, regardless of whether the fibers were coated, the compressive strength of carbon fiber-reinforced mortar (CFRM) composite specimens tended to gradually decrease as the fiber volume fractions increased. On the other hand, in case of the SiO2-coated CFRM composite specimens, the flexural strength was significantly increased compared to uncoated CFRM composite specimens and plain mortar specimens, and the highest flexural strength was obtained at 12 mm and 1.5%, particularly. It can be seen that the new carbon fiber surface modification method employed in this study was very effective in enhancing the flexural strength as cement-reinforcing materials.

scholarly journals Evolution of Durable High-Strength Flowable Mortar Reinforced with Hybrid Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
High Strength ◽  
Experimental Tests ◽  
Steel Fibers ◽  
Synthetic Fiber ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity

The production and use of durable materials in construction are considered as one of the most challenging things for the professional engineers. Therefore, this research was conducted to investigate the mechanical properties and the durability by using of different percentages of steel fiber with high-strength flowable mortar (HSFM) and also the use of the hybridization of steel fibers, palm fibers, and synthetic fiber (Barchip). Different experimental tests (compressive strength, splitting tensile strength, flexural strength, and static modulus of elasticity among others) were determined after 90 days of normal water curing and 180 days of seawater exposure. The results indicate that hybrid fibers of 1.5% steel fibers + 0.25% palm fibers + 0.25% Barchip fibers provide significant improvement in the different mechanical properties of HSFM. Besides, the hybridization of fibers was found to be effective in the terms of durability (exposure to seawater). Therefore, the minimum reduction in static modulus of elasticity, compressive, splitting and flexural strength was obtained for the HSFM mixes of hybrid fibers using steel fibers with palm fibers and also for the use of steel, palm, and Barchip fibers.

Y-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy Fibers

2018 ◽  
Vol 913 ◽  
pp. 682-690
Author(s):  
P.H. Cao ◽  
Hui Wang ◽  
Yuan Wu ◽  
X.J. Liu ◽  
Zhao Ping Lu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Amorphous Alloy ◽  
Flexural Strength ◽  
Attenuation Coefficient ◽  
Volume Fraction ◽  
Steel Fibers ◽  
Linear Attenuation Coefficient ◽  
Reinforcing Fibers ◽  
Γ Ray

The γ-ray shielding performance of the mortar reinforced by zirconium-based amorphous alloy fibers was studied. Meanwhile, the mechanical properties of mortar blocks with two kinds of reinforcement addition phases, i.e. amorphous alloy fibers and steel fibers were tested. The results show that the linear attenuation coefficient to γ-ray increases and the thickness of half-value layer (HVL) decreases with the increasing of volume fraction of reinforcing fibers. The shielding results were simulated by Xcom software, and proven consistent with the experimental results. The compressive strength of mortar block reinforce with fibers of 0.4% volume fraction is 5% higher than that of pure mortar, the flexural strength of mortar block reinforced with fibers of 1.2% volume fraction is 57% higher than that of pure mortar, and 33.4% higher than that of mortar block added with steel fibers.

Monitoring of mechanical properties of prestressed glass fiber epoxy composites over 12 months after fabrication

2021 ◽  
pp. 002199832110047
Author(s):  
Mahmoud Mohamed ◽  
Siddhartha Brahma ◽  
Haibin Ning ◽  
Selvum Pillay
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Flexural Strength ◽  
Compressive Residual Stress ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Epoxy Composites ◽  
Flexural Properties ◽  
Initial Increase ◽  
Fiber Volume

Fiber prestressing during matrix curing can significantly improve the mechanical properties of fiber-reinforced polymer composites. One primary reason behind this improvement is the generated compressive residual stress within the cured matrix, which impedes cracks initiation and propagation. However, the prestressing force might diminish progressively with time due to the creep of the compressed matrix and the relaxation of the tensioned fiber. As a result, the initial compressive residual stress and the acquired improvement in mechanical properties are prone to decline over time. Therefore, it is necessary to evaluate the mechanical properties of the prestressed composites as time proceeds. This study monitors the change in the tensile and flexural properties of unidirectional prestressed glass fiber reinforced epoxy composites over a period of 12 months after manufacturing. The composites were prepared using three different fiber volume fractions 25%, 30%, and 40%. The results of mechanical testing showed that the prestressed composites acquired an initial increase up to 29% in the tensile properties and up to 32% in the flexural properties compared to the non-prestressed counterparts. Throughout the 12 months of study, the initial increase in both tensile and flexural strength showed a progressive reduction. The loss ratio of the initial increase was observed to be inversely proportional to the fiber volume fraction. For the prestressed composites fabricated with 25%, 30%, and 40% fiber volume fraction, the initial increase in tensile and flexural strength dropped by 29%, 25%, and 17%, respectively and by 34%, 26%, and 21%, respectively at the end of the study. Approximately 50% of the total loss took place over the first month after the manufacture, while after the sixth month, the reduction in mechanical properties became insignificant. Tensile modulus started to show a very slight reduction after the fourth/sixth month, while the flexural modulus reduction was observed from the beginning. Although the prestressed composites displayed time-dependent losses, their long-term mechanical properties still outperformed the non-prestressed counterparts.

scholarly journals The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)

2015 ◽  
Vol 773-774 ◽  
pp. 949-953 ◽  
Author(s):  
Izni Syahrizal Ibrahim ◽  
Wan Amizah Wan Jusoh ◽  
Abdul Rahman Mohd Sam ◽  
Nur Ain Mustapa ◽  
Sk Muiz Sk Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Concrete Strength ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Polypropylene Fibre ◽  
Experimental Results

This paper discusses the experimental results on the mechanical properties of hybrid fibre reinforced composite concrete (HyFRCC) containing different proportions of steel fibre (SF) and polypropylene fibre (PPF). The mechanical properties include compressive strength, tensile strength, and flexural strength. SF is known to enhance the flexural and tensile strengths, and at the same time is able to resist the formation of macro cracking. Meanwhile, PPF contributes to the tensile strain capacity and compressive strength, and also delay the formation of micro cracks. Hooked-end deformed type SF fibre with 60 mm length and fibrillated virgin type PPF fibre with 19 mm length are used in this study. Meanwhile, the concrete strength is maintained for grade C30. The percentage proportion of SF-PPF fibres are varied in the range of 100-0%, 75-25%, 50-50%, 25-75% and 0-100% of which the total fibre volume fraction (Vf) is fixed at 0.5%. The experimental results reveal that the percentage proportion of SF-PPF fibres with 75-25% produced the maximum performance of flexural strength, tensile strength and flexural toughness. Meanwhile, the percentage proportion of SF-PPF fibres with 100-0% contributes to the improvement of the compressive strength compared to that of plain concrete.

scholarly journals Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber

2018 ◽  
Vol 225 ◽  
pp. 01022
Author(s):  
Falak O. Abasi ◽  
Raghad U. Aabass
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
Kevlar Fiber ◽  
Carbon Fiber Reinforced ◽  
Short Carbon

Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon fiber and second reinforcement was epoxy reinforced with hybrid reinforcements Kevlar fiber and improved one was the three laminates Kevlar fiber and chopped carbon fibers reinforced epoxy resin. After preparation of composite materials some of the mechanical properties have been studied. Four different fiber loading, i.e., 0 wt. %, 20wt. % CCF, 20wt. % SKF, AND 20wt. %CCF + 20wt. % SKF were taken for evaluating the above said properties. The thermal and mechanical properties, i.e., hardness load, impact strength, flexural strength (bending load), and thermal conductivity are determined to represent the behaviour of composite structures with that of fibers loading. The results show that with the increase in fiber loading the mechanical properties of carbon fiber reinforced epoxy composites increases as compared to short carbon fiber reinforced epoxy composites except in case of hardness, short carbon fiber reinforced composites shows better results. Similarly, flexural strength test, Impact test, and Brinell hardness test the results show the flexural strength, impact strength of the hybrid composites values were increased with existence of Kevlar fibers, while the hardness was decrease. But the reinforcement with carbon fibers increases the hardness and decreases other tests.

scholarly journals Influence of Hybrid Fibers on Toughness Behavior of High Strength Flowing Concrete

2011 ◽  
Vol 57 (3) ◽  
pp. 249-260 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Hybrid Composite ◽  
High Strength ◽  
Steel Fibers ◽  
Hybrid Fibers ◽  
Static Modulus ◽  
Static Modulus Of Elasticity ◽  
Strength And Toughness

Abstract This study investigates the use of steel fibers and hybrid composite with a total fibers content of 2% on the high strength flowing concrete and determines the density, compressive strength, static modulus of elasticity, flexural strength and toughness indices for the mixes. The results show that the inclusion of more than 0.5% of palm fibers in hybrid fibers mixes reduces the compressive strength. The hybrid fibers can be considered as a promising concept and the replacement of a portion of steel fibers with palm fibers can significantly reduce the density, enhance the flexural strength and toughness. The results also indicates that the use of hybrid fibers (1.5 steel fibers + 0.5% palm fibers) in specimens increases significantly the toughness indices and thus the use of hybrid fibers combinations in reinforced concrete would enhance their flexural toughness & rigidity and enhance their overall performances

Sign in / Sign up

Export Citation Format

Share Document