scholarly journals Control Strategy of Microgrid Inverter Based on H∞ State Feedback Repeated Deadbeat Control

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Ren Xie ◽  
Yougui Guo ◽  
Yonghong Lan
Keyword(s):  
Control Strategy ◽  
Output Voltage ◽  
State Feedback ◽  
Control Method ◽  
Harmonic Distortion ◽  
Response Speed ◽  
Stability Control ◽  
System Stability ◽  
Linear Matrix ◽  
Deadbeat Control

Aiming at the voltage distortion at the microgrid public connection point caused by nonlinear loads, a H∞ state feedback deadbeat repetitive control strategy is proposed to rectify the total harmonic distortion of the output voltage. Firstly, through establishing the state space of the repetitive controller, introducing state feedback, combining the H∞ control theory, and reformulating the system stability problem as a convex optimization problem with a set of linear matrix inequality (LMI) constraints to be solved, high stability control accuracy can be guaranteed and antiharmonic interference strengthened. Secondly, by introducing deadbeat control technology to improve the transient response speed of the system, changes in output voltage caused by load changes can be quickly compensated. Compared with the existing methods, the designed control method has the advantages of good stability, low harmonic content, and fast convergence speed, and the results are easier to verify. Finally, the simulation verifies the effectiveness of the proposed control strategy.

Based the Active Defense Substation Domain Strategy Control Method to against Blackout

2014 ◽  
Vol 1070-1072 ◽  
pp. 687-692
Author(s):  
Qing Wei Zhang ◽  
Sheng Yang ◽  
Ying Dai
Keyword(s):  
Control Strategy ◽  
Control Method ◽  
Control Strategies ◽  
Stability Control ◽  
Simulation Software ◽  
System Stability ◽  
Active Defense ◽  
Real Time Analysis ◽  
Strategy Control ◽  
Building Program

In the previous blackout, overload components out of operation often leaded to the expansion of the accident. One active defense substation domain strategy control system was proposed to prevent the N-1 contingencies to N-2 contingencies caused blackout. Through the substation elements states real time analysis , the active defense control strategy was created by learn from the principles and action messages of backup switching equipment, protection and automatic stability control devices. In order to keep the overall system stability, the active defense control strategy was completed by actively put in the standby element or quit part of the overload elements, to make the system into a new equilibrium state. Contrasting these control strategies by PSCAD/EMTDC simulation software, the results presented that this strategy could quickly change the “Close to collapse” zone into the stability states and the building program simple and practical.

Robust H2/H∞Control Strategy for Linear Markovian Jump Systems

2014 ◽  
Vol 525 ◽  
pp. 646-652
Author(s):  
Min Bian ◽  
Qing Yun Guo
Keyword(s):  
Control Strategy ◽  
State Feedback ◽  
Control Strategies ◽  
State Feedback Control ◽  
Linear Matrix ◽  
Bounded Real Lemma ◽  
Finite State ◽  
Linear State ◽  
Feasible Solutions ◽  
Jump Systems

The robust H2/<em>H</em>∞ control strategy for a class of linear continuous-time uncertain systems with randomly jumping parameters is investigated. The transition of the jumping parameters is decided by a finite-state Markov process. The uncertainties are supposed to be norm-bounded. It is desired to design a linear state feedback control strategies such that the closed-loop system satisfies H performance and minimizes the H2 norm of the system. A sufficient condition is first established on the existence of the robust H2/<em>H</em>∞controller bases on the bounded real lemma. Then the corresponding state-feedback law is given in terms of a set of linear matrix inequalities (LMIs). It is showed that this condition is equivalent to the feasible solutions problem of LMI. Furthermore, the control strategy design problem is converted into a convex optimization problem subject to LMI constraints, which can be easily solved by standard numerical software.

Constant force control for aluminum wheel hub grinding based on ESO + backstepping

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shijie Dai ◽  
Yufeng Zhao ◽  
Wenbin Ji ◽  
Jiaheng Mu ◽  
Fengbao Hu
Keyword(s):  
Control Strategy ◽  
Force Control ◽  
Control Method ◽  
Response Speed ◽  
Backstepping Control ◽  
Constant Force ◽  
Content Type ◽  
Disturbance Rejection Control ◽  
The Stability ◽  
Differential Control

Purpose This paper aims to present a control method to realize the constant force grinding of automobile wheel hub. Design/methodology/approach A constant force control strategy combined by extended state observer (ESO) and backstepping control is proposed. ESO is used to estimate the total disturbance to improve the anti-interference and stability of the system and Backstepping control is used to improve the response speed of the system. Findings The simulation and grinding experimental results show that, compared with the proportional integral differential control and active disturbance rejection control, the designed controller can improve the dynamic response performance and anti-interference ability of the system and can quickly track the expected force and improve the grinding quality of the hub surface. Originality/value The main contribution of this paper lies in the proposed of a new constant force control strategy, which significantly improved the stability and precision of grinding force.

Control Strategy of Wind Photovoltaic and Energy Storage System Stability Running

2013 ◽  
Vol 336-338 ◽  
pp. 547-550
Author(s):  
Ji Hong Zhang ◽  
Zhen Kui Wu ◽  
Hua Li ◽  
Han Shan Li
Keyword(s):  
Energy Storage ◽  
Distributed Generation ◽  
Control Strategy ◽  
Control Method ◽  
Storage System ◽  
Energy Storage System ◽  
System Stability ◽  
Mathematics Model ◽  
Generation Efficiency ◽  
Micro Grid

Micro grid may exert adequately distributed generation efficiency, and that wind Photovoltaic and Energy Storage is a key equipment in the micro grid. Aiming at the distributed generation existing intermittence and randomicity characteristic, the paper discussed the micro grid P/Q control method under the connection grid state and the micro grid U/F control method under the disconnection grid state. It also studied the distributed generation parameters variational law under the micro grid different run mode, and built the correlative mathematics model and tested by simulation. The results show: the control strategy ensured the mice grid running stably, and achieved the system anticipative design request, and offered theory foundation for the distributed generation extend application.

Proposed Topology for Voltage Sag Mitigation with New Control Strategy

2019 ◽  
Vol 15 (2) ◽  
pp. 138-144
Author(s):  
Adnan Diwan ◽  
Khalid Abdulhasan
Keyword(s):  
Duty Cycle ◽  
Control Strategy ◽  
Output Voltage ◽  
System Analysis ◽  
Control Method ◽  
Boost Converter ◽  
Voltage Sag ◽  
Voltage Sags ◽  
Long Duration ◽  
Simulation Results

voltage sags represent the greatest threat to the sensitive loads of industrial consumers, the microprocessor based-loads, and any electrical sensitive components. In this paper, a special topology is proposed to mitigate deep and long duration sags by using a modified AC to AC boost converter with a new control method. A boost converter is redesigned with a single switch to produces an output voltage that is linearly proportional to the duty cycle of the switch. On the other hand, the proposed control system is based on introducing a mathematical model that relates the missing voltage to the duty cycle of the boost converter switch. The simulation results along with the system analysis are presented to confirm the effectiveness and feasibility of the proposed circuit.

scholarly journals Single-Phase Inverter Deadbeat Control with One-Carrier-Period Lag

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 154
Author(s):  
Wei Yao ◽  
Jiamin Cui ◽  
Wenxi Yao
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Harmonic Distortion ◽  
Voltage Source ◽  
Current Loop ◽  
Deadbeat Control ◽  
Additional Advantage ◽  
Power Sources ◽  
Pwm Inverter ◽  
Single Phase Inverter

This paper presents a novel digital control scheme for the regulation of single-phase voltage source pulse width modulation (PWM) inverters used in AC power sources. The proposed scheme adopts two deadbeat controllers to regulate the inner current loop and the outer voltage loop of the PWM inverter. For the overhead of digital processing, the change of duty of PWM lags one carrier period behind the sampling signal, which is modeled as a first-order lag unit in a discrete domain. Based on this precise modeling, the deadbeat controllers make the inverter get a fast dynamic response, so that the inverter’s output voltage is obtained with a very low total harmonic distortion (THD), even when the load is fluctuating. The parameter sensitivity of the deadbeat control was analyzed, which shows that the proposed deadbeat control system can operate stably when the LC filter’s parameters vary within the range allowed. The experimental results of a 2kW inverter prototype show that the THD of the output voltage is less than 3% under resistive and rectifier loads, which verifies the feasibility of the proposed scheme. An additional advantage of the proposed scheme is that the parameter design of the controller can be fully programmed without the experience of a designer.

Finite time takagi-sugeno fuzzy control for hydro-turbine governing system

2016 ◽  
Vol 24 (5) ◽  
pp. 1001-1010 ◽  
Author(s):  
Bin Wang ◽  
Jianyi Xue ◽  
Fengjiao Wu ◽  
Delan Zhu
Keyword(s):  
Fuzzy Control ◽  
Finite Time ◽  
Control Method ◽  
Fuzzy Model ◽  
Schur Complement ◽  
Stability Control ◽  
Linear Matrix ◽  
Hydro Turbine ◽  
Governing System ◽  
Takagi Sugeno

In this study, a robust finite time Takagi-Sugeno fuzzy control method for hydro-turbine governing system (HTGS) is investigated. Firstly, the mathematical model of HTGS is introduced, and on the basis of Takagi-Sugeno (T-S) fuzzy rules, the T-S fuzzy model of HTGS is presented. Secondly, based on finite time stability theory, a novel finite time Takagi-Sugeno fuzzy control method is designed for the stability control of HTGS. Thirdly, the relatively loose sufficient stability condition is acquired, which could be transformed into a group of linear matrix inequalities (LMIs) via Schur complement as well as the strict mathematical derivation is given. Furthermore, the control method could resist random disturbances, which shows the good robustness. Simulation results indicate the designed finite time T-S fuzzy control scheme works well compared with the conventional method. The approach proposed in this paper is easy to implement and also provides reference for relevant hydropower systems.

scholarly journals Stability Analysis of an Inverted Pendulum on a Cart with the Presence of Restoring and Frictional Forces Disturbance using Observer Based and Full State Feedback H2 Controllers

2020 ◽  
Author(s):  
Mustefa Jibril ◽  
Messay Tadese ◽  
Fiseha Bogale
Keyword(s):  
State Feedback ◽  
Inverted Pendulum ◽  
Stability Control ◽  
System Stability ◽  
Lagrangian Equation ◽  
System Equation ◽  
Full State ◽  
Full State Feedback ◽  
Frictional Forces ◽  
The Stability

In this paper, the stability control of the inverted pendulum on a cart with a disturbance forces has been done using observer based and full state feedback H2 controllers. The Lagrangian equation has been used to model the system equation of motions and linearized the system to the unstable upward position. Comparison of the system stability has been simulated by comparing the proposed controllers using Matlab/Scripts and a promising results has been analyzed successfully.

scholarly journals An Enhanced Control Strategy for Mitigation of State-Transition Oscillation Phenomena in Grid-Forming Self-Synchronized Converter System with Islanded Power System

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8453
Author(s):  
Ki Ryong Kim ◽  
Sangjung Lee ◽  
Jong-Pil Lee ◽  
Jaesik Kang
Keyword(s):  
Power System ◽  
Control Strategy ◽  
State Transition ◽  
Reactive Power ◽  
Phase Synchronization ◽  
Control Method ◽  
System Stability ◽  
Electromagnetic Transient ◽  
Point Of Common Coupling ◽  
Hardware In Loop

This paper proposes an enhanced control strategy for mitigating state-transition oscillations in active and reactive power responses of self-synchronized converter system to secure the islanded power system stability. The self-synchronized converter is well known for “grid-forming” that is able to operate to stand-alone mode (SAM) providing grid voltage and frequency without phase synchronization units. Although the grid-forming (GFM) is self-synchronized, the inherent synchronization principle causes system degradation in which should maintain a point of common coupling (PCC) voltage for critical loads as well as transitions from grid-connected mode (GCM) to SAM and vice versa. Therefore, this paper focuses on resolving the inherent oscillatory issues in GFM self-synchronized converter system (especially adopted ‘synchronverter’ principle), and proposes a control strategy for controllability improvement based on stability analysis for smooth state-transition under islanded power system. The efficacy of the proposed control method is verified through a high-fidelity electromagnetic transient (EMT) simulation with case studies on 30kW synchronverter system and further experimental hardware-in-loop system (HILS) test with Opal-RT (OP-5707) platform.

scholarly journals Overlapping Decentralized Control Strategies of Building Structures’ Vibration with Time Delay Based on H∞ Control Algorithms under Seismic Excitation

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Xiaofang Kang ◽  
Jian Wu ◽  
Yewei Zhang ◽  
Guoliang Liu ◽  
Suhui Zhang ◽  
...  
Keyword(s):  
Control System ◽  
Time Delay ◽  
Vibration Control ◽  
Decentralized Control ◽  
Control Strategy ◽  
Control Algorithm ◽  
Control Method ◽  
Control Strategies ◽  
Linear Matrix ◽  
Feedback Gain

A decentralized control strategy can effectively solve the control problem of the large-scale time delayed structures. In this paper, combining the overlapping decentralized control method, linear matrix inequality (LMI) method, and H∞ control algorithm, overlapping decentralized H∞ control approach of the time delayed structures has been established. The feedback gain matrixes of all subsystems are obtained by this method based on genetic algorithm optimization tools and the specific goal of optimization control. The whole vibration control system of the time delayed structures is divided into a series of overlapping subsystems by overlapping decentralized control strategy. The feedback gain matrixes of each subsystem can be obtained by using H∞ control algorithm to calculate each subsystem. The vibration control of a twenty layers’ antiseismic steel structure Benchmark model was analyzed with the numerical method. The results show that the proposed method can be applied to control system with time delay. The overlapping decentralized control strategies acquire the similar control effects with that of the centralized control strategy. Moreover, the flexibility of the controller design has been enhanced by using overlapping decentralized control strategies.

Sign in / Sign up

Export Citation Format

Share Document