scholarly journals Research on the Reasonable Coal Pillar Width and Surrounding Rock Supporting Optimization of Gob-Side Entry under Inclined Seam Condition

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Li-li Jiang ◽  
Zeng-qiang Yang ◽  
Gang-wei Li
Keyword(s):  
Stress Field ◽  
Control Mechanism ◽  
Coupling Effect ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Control Technology ◽  
Pillar Width ◽  
Monitoring Methods ◽  
Anchor Cable ◽  
Surrounding Rock Control

In order to study the optimal coal pillar width and surrounding rock control mechanism of gob-side entry under inclined seam condition, the 130205 return air entry adjacent to 130203 gob in Yangchangwan No. 1 well is taken as a typical engineering background. By means of engineering background analysis, theoretical analysis based on inside and outside stress field, numerical simulation by FLAC3D software, and in situ industrial test and relevant monitoring methods, the optimal coal pillar width and surrounding rock control technology are obtained. The results show that the influence range of inside stress field is about 12.2∼12.8 m based on theoretical calculation result; under the influence of 10 m coal column, the overall deformation of the roadway is relatively small and within the reasonable range of engineering construction, so the width of the coal pillar along the return air roadway is set to 10 m which is more reasonable; the cross-section characteristics of special-shaped roadway lead to asymmetric stress distribution and fragmentation of surrounding rock, and then the asymmetric surrounding rock control technology under the coupling effect of roof prestressed anchor + high-strength single anchor cable + truss anchor cable support is proposed. The monitoring results of this support method are effective for the maintenance of gob-side entry, and the study conclusions provide new guidance for the surrounding rock control mechanism of gob-side entry under inclined seam conditions.

Study on Coal Pillar Width and Surrounding Rock Control of Gob-Side Entry in Extra-thick Coal Seam

2020 ◽  
Vol 38 (6) ◽  
pp. 6855-6868
Author(s):  
Xiaobin Li ◽  
Yongqiang Zhao ◽  
Wenrui He ◽  
Liang Li ◽  
Fulian He
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Pillar Width ◽  
Thick Coal Seam ◽  
Surrounding Rock Control

scholarly journals Study on In Situ Stress Measurement and Surrounding Rock Control Technology in Deep Mine

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhongcheng Qin ◽  
Bin Cao ◽  
Yongle Liu ◽  
Tan Li
Keyword(s):  
Stress Field ◽  
Principal Stress ◽  
Coal Mine ◽  
Maximum Principal Stress ◽  
In Situ Stress ◽  
Measured Data ◽  
Surrounding Rock ◽  
In Situ Stress Measurement ◽  
Surrounding Rock Control

In situ stress is the direct cause of roadway deformation and failure in the process of deep mining activities. The measured data of in situ stress in the Shuanghe coal mine show that the maximum principal stress is 44.94~50.61 MPa, and the maximum principal stress direction is near horizontal direction, which belongs to tectonic stress field. The maximum horizontal principal stress is 1.66~1.86 of the vertical stress. The horizontal principal stress controls the deep stress field. According to the measured data of in situ stress, the high-strength prestress bolt and cable collaborative support form is designed in the Shuanghe coal mine. Based on the stress field research of bolt and cable, the optimal prestress ratio of bolt and cable is proposed as 3. When the prestress ratio of bolt and cable is constant, the smaller the length ratio of bolt and cable is, the better the effect of prestressed field formed by cooperative support is. The results are applied to the support design of the mining roadway in the Shuanghe coal mine. Through the field monitoring test results, it is found that the maximum roof subsidence is 86 mm, the maximum floor deformation is 52 mm, and the maximum deformation of two sides is 125 mm. The surrounding rock control effect of the roadway is good, and the surrounding rock deformation conforms to the engineering technology standard requirements. The research results of this paper can provide some reference for the surrounding rock support of high ground stress mining roadway under similar conditions.

scholarly journals Roadway Surrounding Rock under Multi-Coal-Seam Mining: Deviatoric Stress Evolution and Control Technology

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
En Wang ◽  
Shengrong Xie ◽  
Fulian He ◽  
Long Wang ◽  
...  
Keyword(s):  
Plastic Zone ◽  
Coal Seam ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Mine Pressure ◽  
Coal Face ◽  
Surrounding Rock Control ◽  
Seam Mining ◽  
Peak Value

Multi-coal-seam mining creates surrounding rock control difficulties, because the mining of a coal face in one seam can affect coal faces in another. We examine the effects of multi-coal-seam mining on the evolution of the deviatoric stress distribution and plastic zone in the roadway surrounding rock. In particular, we use numerical simulation, theoretical calculation, drilling detection, and mine pressure observation to study the distribution and evolution characteristics of deviatoric stress on Tailgate 8709 in No. 11 coal seam in Jinhuagong mine when the N8707 and N8709 coal faces in No. 7-4 coal seam and the N8707 and N8709 coal faces in No. 11 coal seam are mined. The evolution laws of deviatoric stress and the plastic zone of roadway surrounding rock in the advance and behind sections of the coal face are studied, and a corresponding control technology is proposed. The results show that the peak value of deviatoric stress increases with the advance of the coal face, and the positions of the peak value of deviatoric stress and the plastic zone become deeper. The deflection angle of the peak stress after mining at each coal face and the characteristics of the peak zone of deviatoric stress and the plastic zone of the roadway surrounding rock under the disturbance of multi-coal-seam mining are determined. In conclusion, the damage range in the roadway roof in the solid-coal side and coal pillar is large and must be controlled. A combined support technology based on high-strength and high pretension anchor cables and truss anchor cables is proposed; long anchor cables are used to strengthen the support of the roadway roof in the solid-coal side and coal pillar. The accuracy of the calculated plastic zone range and the reliability of the combined support technology are verified through drilling detection and mine pressure observation on site. This research can provide a point of reference for roadway surrounding rock control under similar conditions.

scholarly journals Deviatoric Stress Evolution Laws and Control in Surrounding Rock of Soft Coal and Soft Roof Roadway under Intense Mining Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
Chunwei Ji ◽  
Shengrong Xie ◽  
En Wang ◽  
Fulian He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Plastic Zone ◽  
Theoretical Calculations ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Anchor Cable ◽  
Soft Coal ◽  
Working Face ◽  
Failure Line

Aiming at the problem of large deformation and instability failure and its control of soft coal and soft roof roadway under intense mining, laboratory experiments, theoretical calculations, Flac3D numerical simulation, borehole peeping, and pressure observation were used to study the deflection characteristics of the deviatoric stress of the gas tailgate and the distribution and failure characteristics of the plastic zone in the mining face considering the strain softening characteristics of the roof and coal of roadway, and then the truss anchor cable-control technology is proposed. The results show the following: (1) The intense mining influence on the working face will deflect the peak deviatoric stress zone (PDSZ) of the surrounding rock of the gas tailgate. The influence distance of PDSZ is about 20 m in advance and 60 m in lag; the PDSZ at the gob side of the roadway is located in the range of 3–5.5 m from the surface of the coal pillar, while the coal wall side is mainly located in the range of 3–4.5 m at the shoulder corner and bottom corner of the solid coal. (2) The intense mining in the working face caused the nonuniform expansion of the surrounding rock plastic area of the gas tailgate. The two shoulder angles of the roadway and the bottom of the coal pillar have the largest damage range, and the maximum damage location is the side angle of the coal pillar (5 m). Angle and bottom angle of coal pillar are the key points of support control. (3) The plastic failure line of the surrounding rock of the gas tailgate is always between the inner and outer contours of the PDSZ, and the rock mass in the PDSZ is in a stable and unstable transition state, so the range of anchor cable support should be cross plastic failure line. (4) The theoretical calculations and numerical simulation results agree well with the drilling peep results. Based on the deflection law of the PDSZ and the expansion characteristics of the plastic zone, a truss anchor cable supporting system with integrated locking and large-scale support function is proposed to jointly control the roof and the two sides, which effectively solves the problem of weak surrounding rock roadway under severe mining deformation control problems realizing safety and efficient production in coal mines under intense mining.

scholarly journals Numerical Study on Soft Coal Pillar Stability in an Island Longwall Panel

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Qingyun Xu ◽  
Jian-Biao Bai ◽  
Shuai Yan ◽  
Rui Wang ◽  
Shaoxu Wu
Keyword(s):  
Plastic Zone ◽  
Numerical Study ◽  
Deformation Characteristic ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Pillar Width ◽  
Soft Coal ◽  
Geological Conditions ◽  
Longwall Panel ◽  
Coal Pillars

Roadway support and management of longwall panels in an island soft coal panel are always difficult work. In a test mine, stress distribution, deformation characteristic, and plastic zone distribution around the roadway and coal pillars in the development and mining periods were investigated with respect to the widths of different coal pillars using theoretical and simulation methods. The most reasonable width of coal pillars was comprehensively determined, and the field test was conducted successfully. The results show that a reasonable width of coal pillars is 7.0–8.2 m using the analytical method. The distribution of vertical stress in the coal pillars showed an asymmetric “double-hump” shape, in which the range of abutment pressure was about 26.0–43.0 m, and the roadway should be laid away from stress concentration. When the coal pillar width is 5.0–7.0 m, deformation of the roadway is half that with 8.0–10.0 m coal pillar in the development and mining period. The plastic zone in the surrounding rock firstly decreases and increases with increasing coal pillar width; the smallest range occurs with a coal pillar width of 5.0 m. Finally, a reasonable width for coal pillars in an island panel was determined to be 5.0 m. Industrial practice indicated that a coal pillar width of 5.0 m efficiently controlled deformation of the surrounding rock, which was an important basis for choosing the width of coal pillars around gob-side entries in island longwall panels with similar geological conditions.

scholarly journals A physical model study of surrounding rock failure near a fault under the influence of footwall coal mining

2020 ◽  
Author(s):  
Shukun Zhang ◽  
Lu Lu ◽  
Ziming Wang ◽  
Shuda Wang
Keyword(s):  
Rock Mass ◽  
Physical Model ◽  
Hanging Wall ◽  
Coal Pillar ◽  
Vertical Displacement ◽  
Surrounding Rock ◽  
Pillar Width ◽  
Model Study ◽  
Working Face ◽  
Coal Pillars

AbstractA study of the deformation of the surrounding rock and coal pillars near a fault under the influence of mining is conducted on a physical model for the design of coal pillars to support and maintain the roofs of adjacent fault roadways. This research is based on the 15101 mining face in the Baiyangling Coal Mine, Shanxi, China, and uses simulation tests similar to digital speckle test technology to analyse the displacement, strain and vertical stress fields of surrounding rocks near faults to determine the influence of the coal pillar width. The results are as follows. The surrounding rock of the roadway roof fails to form a balance hinge for the massive rock mass. The vertical displacement, vertical strain and other deformation of the surrounding rock near the fault increase steeply as the coal pillar width decreases. The steep increase in deformation corresponds to a coal pillar width of 10 m. When the coal pillar width is 7.5 m, the pressure on the surrounding rock near the footwall of the fault suddenly increases, while the pressure on the hanging wall near the fault increases by only 0.35 MPa. The stress of the rock mass of the hanging wall is not completely shielded by the fault, and part of the load disturbance is still transmitted to the hanging wall via friction. The width of the fault coal pillars at the 15101 working face is determined to be 7.5 m, and the monitoring data verify the rationality of the fault coal pillars.

Sign in / Sign up

Export Citation Format

Share Document