scholarly journals Synthesis and Characterization of Magnetic Fe3O4/Zeolite NaA Nanocomposite for the Adsorption Removal of Methylene Blue Potential in Wastewater Treatment

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Ngoc Bich Thi Tran ◽  
Ngoc Bich Duong ◽  
Ngoc Long Le
Keyword(s):  
Methylene Blue ◽  
Wastewater Treatment ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Fe3o4 Nanoparticles ◽  
Synthesis Process ◽  
X Ray ◽  
Adsorption Removal ◽  
Zeolite Naa ◽  
Magnetic Fe3o4

In this research, the magnetic Fe3O4/zeolite NaA nanocomposite (Fe3O4/ZA), Fe3O4 nanoparticles, and zeolite NaA have been synthesized by facile hydrothermal methods for adsorption removal of methylene blue from aqueous solution. The as-synthesized Fe3O4/ZA nanocomposite was characterized by X-ray diffraction (XRD), MicroRaman analysis, Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray fluorescence (XRF), N2 adsorption isotherms (BET), and UV-VIS analysis. The results show that with a small weight loading of Fe3O4, the ∼3.3% Fe3O4/ZA sample exhibits a high adsorption capacity (∼40.36 mg·g−1) and removal efficiency (∼96.8%) compared to that of the zeolite NaA (∼32.99 mg·g−1 and 79.11%, respectively). Interestingly, the removal efficiency and the adsorption capacity increase rapidly with the increase of adsorption time (10–60 minutes) and Fe3O4 loading (∼3.3–9.3% wt.) in the Fe3O4/ZA composition. The adsorption mechanism of MB molecules of the Fe3O4/ZA can be addressed at the combination of the interaction between active sites on the surfaces and edges of the invert spinel ferrite Fe3O4 nanoparticles and zeolite NaA with MB molecules. Our approach provides a simple, efficient, and scalable synthesis process that render practical applications of the magnetic Fe3O4/ZA nanocomposite as a lower-cost adsorbent for wastewater treatment.

scholarly journals Effect of synthesis conditions  on  methylene blue adsorption capacity of electrochemically preparated graphene

2020 ◽  
Vol 9 (3) ◽  
pp. 9-14
Author(s):  
Hao Pham Van ◽  
Linh Ha Xuan ◽  
Oanh Phung Thi ◽  
Hong Phan Ngoc ◽  
Huy Nguyen Nhat ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Graphene Nanosheets ◽  
Electrochemical Exfoliation ◽  
X Ray ◽  
Synthesis Conditions ◽  
Mb Adsorption

This report presents the effect of synthesis conditions on the synthesis of graphene nanosheets via electrochemical exfoliation method for adsorbing methylene blue from aqueous solution. Oxygen-containing functional groups and defects in the material were characterized by Raman and X-ray photoelectron spectroscopy (XPS). As a result, by using voltage of 15 V, (NH4)2SO4 (5%, 250 mL) and KOH (7.5%, 250 mL), the obtained material showed the highest MB adsorption capacity due to the high densities of oxygen-containing groups and defects comparison to other conditions.

scholarly journals Core-shell Fe3O4@zeolite NaA as an Adsorbent for Cu2+

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5047
Author(s):  
Jun Cao ◽  
Peng Wang ◽  
Jie Shen ◽  
Qi Sun
Keyword(s):  
Adsorption Capacity ◽  
Adsorption Process ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
Transmission Electron ◽  
Monolayer Adsorption ◽  
Zeolite Naa ◽  
Infrared Spectrometer

Here, using Fe3O4@SiO2 as a precursor, a novel core-shell structure magnetic Cu2+ adsorbent (Fe3O4@zeolite NaA) was successfully prepared. Several methods, namely X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR), Transmission electron microscope (TEM), Brunauer Emmett Teller (BET) and vibrating sample magnetometry (VSM) were used to characterize the adsorbent. A batch experiment was conducted to study the Cu2+ adsorption capacity of Fe3O4@zeolite NaA at different pH values, contact time, initial Cu2+ concentration and adsorbent does. It is found that the saturated adsorption capacity of Fe3O4@zeolite NaA on Cu2+ is 86.54 mg/g. The adsorption isotherm analysis shows that the adsorption process of Fe3O4@zeolite NaA to Cu2+ is more consistent with the Langmuir model, suggesting that it is a monolayer adsorption. Adsorption kinetics study found that the adsorption process of Fe3O4@zeolite NaA to Cu2+ follows the pseudo-second kinetics model, which means that the combination of Fe3O4@zeolite NaA and Cu2+ is the chemical chelating reaction. Thermodynamic analysis shows that the adsorption process of Fe3O4@zeolite NaA to Cu2+ is endothermic, with increasing entropy and spontaneous in nature. The above results show that Fe3O4@zeolite NaA is a promising Cu2+ adsorbent.

Improvement of zeolite adsorption capacity for cephalexin by coating with magnetic Fe3O4 nanoparticles

2016 ◽  
Vol 218 ◽  
pp. 615-624 ◽  
Author(s):  
Anoushiravan Mohseni-Bandpi ◽  
Tariq J. Al-Musawi ◽  
Esmail Ghahramani ◽  
Mansur Zarrabi ◽  
Samira Mohebi ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Fe3o4 Nanoparticles ◽  
Magnetic Fe3o4 Nanoparticles ◽  
Magnetic Fe3o4

Ultrasound and microwave-assisted preparation of Fe-activated carbon as an effective low-cost adsorbent for dyes wastewater treatment

RSC Advances ◽  
2016 ◽  
Vol 6 (82) ◽  
pp. 78936-78946 ◽  
Author(s):  
Song Cheng ◽  
Libo Zhang ◽  
Hongying Xia ◽  
Jinhui Peng ◽  
Jianhua Shu ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Langmuir Isotherm ◽  
Low Cost ◽  
Order Model ◽  
Microwave Assisted ◽  
Pseudo Second Order ◽  
Mb Adsorption

A and B are Langmuir isotherm and pseudo-second-order model. We conclude that MB adsorption capacity of Fe-activated carbon is bigger than raw activated carbon, indicating that Fe-activated carbon has better MB removal efficiency.

Application of Bamboo Shoot Shell in Color Removal from Methylene Blue Solution

2014 ◽  
Vol 675-677 ◽  
pp. 489-492
Author(s):  
Jing Miao Zhang ◽  
Zhi Wei Zhong ◽  
Da Pan Zhu ◽  
Lin Man Lin ◽  
Qing Ju Wang ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Removal Efficiency ◽  
Ph Value ◽  
Color Removal ◽  
Target Color ◽  
Maximum Adsorption Capacity ◽  
Bamboo Shoot ◽  
Blue Solution ◽  
Optimized Conditions

Biosorption of dyeing wastewater is most widely used method so far. The adsorption of methylene blue (MB) with bamboo shoot shell (BSS) as biosorbent was investigated. Orthogonal test was used to optimize the adsorption process, and adsorption capacity and color removal efficiency were used to judge the adsorptivity of BSS. Results showed that maximum adsorption capacity was 225.71 mg·g-1, and color removal efficiency could achieve to 98.96% during the test. To obtain best adsorption capacity, the optimized conditions of temperature, initial concentration of dye, BSS dosage, pH value and adsorption time were 45 °C, 400 mg·L-1, 10 mg/10 mL, 9.6 and 30 min, respectively. As to another target color removal efficiency, the best parameters were 100 mg·L-1, 200 mg/10 mL, 11.5 and 120 min, respectively. The results reveal that the agricultural by-product BSS is an effective biosorbent.

scholarly journals Fe-doped carbon aerogels from sodium alginate for the removal of methylene blue

2021 ◽  
Vol 293 ◽  
pp. 03015
Author(s):  
Zuozhao Zhai ◽  
Bin Ren ◽  
Lihui Zhang ◽  
Zhenfa Liu
Keyword(s):  
Methylene Blue ◽  
Wastewater Treatment ◽  
Sodium Alginate ◽  
Removal Efficiency ◽  
Acidic Condition ◽  
Carbon Aerogels ◽  
Alkaline Conditions ◽  
Fenton System

In this article, Fe-doped carbon aerogels from sodium alginate were used for the removal of methylene blue (MB) in water. Under acidic condition, the sample carbonized at 700 °C (T700) undergoes Fe-C micro-electrolysis to produce highly chemically active Fe2+ and [H] to degrade MB. Under neutral or alkaline conditions, Fe2+ produced by Fe-C micro-electrolysis become Fe(OH)3, which can effectively adsorb MB. In addition, when T700 combines with H2O2 to form Fenton system, the MB removal efficiency was significantly improved. The Fe-doped carbon aerogels can be used in wastewater treatment and when combine the materials with H2O2 can greatly improve the MB removal efficiency.

Adsorption Mechanism of Rectorite Modified by Lithium

2014 ◽  
Vol 919-921 ◽  
pp. 2017-2021
Author(s):  
Yin An Ming ◽  
Ying Ru Wang ◽  
Zheng Liu ◽  
Fu Rong Zhou
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Adsorption Mechanism ◽  
Interlayer Spacing ◽  
Blue Dye ◽  
Adsorption Efficiency ◽  
X Ray Diffraction ◽  
X Ray ◽  
Index Measurement ◽  
Infrared Spectrophotometer

In this paper, the mechanism that lithium-modified rectorite (Rec-Li) and raw rectorite adsorbed methylene blue dye in wastewater was investigated, and the adsorption properties of the two adsorbents were also compared. The results showed that the static saturated adsorption capacity of raw rectorite was 77.75mg/g, however, the capacity of lithium-modified rectorite was up to 189.62mg/g, the adsorption efficiency was increased by 144%. Therefore, the adsorption capacity of Rec-Li to methylene blue was much higher than raw rectorite. The Rec-Li and raw rectorite were characterized respectively by means of fourier transform infrared spectrophotometer (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and colloid index measurement. The analysis indicated that, after modification by lithium, the colloid index was changed from 12mL/3g to 198mL/3g and the interlayer spacing was changed from 0.01~0.1μm to 1~1.5μm. With the increasing of the colloid index, the dispersion effect of adsorbent in wastewater and the contact area between adsorbent and pollutants were improved. And the increase of interlayer spacing was conducive to pollutants entering the hole and so that the adsorption capacity of Rec-Li was increased significantly.

Magnetic Fe3O4 nanoparticles for adsorptive removal of acid dye (new coccine) from aqueous solutions

2010 ◽  
Vol 62 (4) ◽  
pp. 844-851 ◽  
Author(s):  
Chih-Huang Weng ◽  
Yao-Tung Lin ◽  
Chia-Ling Yeh ◽  
Y. C. Sharma
Keyword(s):  
Ionic Strength ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Fe3o4 Nanoparticles ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Maximum Adsorption Capacity ◽  
Average Particle ◽  
Magnetic Fe3o4 Nanoparticles ◽  
Magnetic Fe3o4

The ability of magnetic Fe3O4 nanoparticles (MFN) to remove new coccine (NC), an acidic dye, from aqueous solutions was studied. Parameters including ionic strength, pH, and temperature were evaluated. MFN, prepared by precipitation method, exhibits an average particle size of 12.5 nm, specific surface area of 85.5 m2/g, and pHzpc of 5.9. Results of kinetic adsorption experiments indicated that the pseudo-second-order rate of adsorption increased with increasing initial NC concentration. Findings also revealed that the equilibrium data could be fitted into Langmuir adsorption isotherm. The adsorption is favored at low pH, high temperature, and low ionic strength, whereupon a maximum adsorption capacity of 1.11 × 10−4 mol/g was determined for NC. Thermodynamic functions indicated that the adsorption process is spontaneous and exothermic in nature. Tests of regeneration showed that after 5 regeneration cycles the adsorption capacity of NC decreased to 35% to its original capacity.

scholarly journals Nanosized Iron Oxide Uniformly Distributed on 3D Carbon Nanosheets: Efficient Adsorbent for Methylene Blue

2019 ◽  
Vol 9 (14) ◽  
pp. 2898
Author(s):  
Jiaqin Chen ◽  
Mei Ming ◽  
Caili Xu ◽  
Jie Wu ◽  
Yi Wang ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Fe3o4 Nanoparticles ◽  
Magnetic Particles ◽  
Carbon Materials ◽  
Cation Exchange Resin ◽  
Dye Adsorption ◽  
Carbon Adsorbents ◽  
One Pot ◽  
Magnetic Carbon

Magnetic carbon materials as adsorbents for dye removing have attracted increasing attention because of their magnetic separation feature. However, the immobilization of large magnetic particles on a carbon matrix greatly decreases the available sites for adsorption, resulting in a low adsorption capacity. The synthesis of magnetic carbon materials as adsorbents for dye adsorption with high adsorption capacity remains challenging. Herein, porous carbon (PC) was firstly synthesized through the calcination of macroporous acrylic type cation exchange resin. The as-prepared PC was applied as a matrix to deposit nano-sized Fe3O4 nanoparticles (MPC) via a facile one-pot solvothermal strategy. The nano-sized Fe3O4 nanoparticles (5.19 nm in diameter) are uniformly distributed on the PC surface. The MPC possesses an exceptional performance for methylene blue removal (qe = 214.4 mg g−1) at room temperature, outperforming most previous magnetic carbon adsorbents. The large surface area of the MPC originated from the combined advantages of PC and nano-sized Fe3O4 must be ascribed to the high performance of MPC composite toward methylene blue adsorption.

Sign in / Sign up

Export Citation Format

Share Document