scholarly journals Study on Characteristics of Mining Earthquake in Multicoal Seam Mining under Thick and Hard Strata in High Position

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Shuli Wang ◽  
Guangli Zhu ◽  
Kaizhi Zhang ◽  
Lei Yang
Keyword(s):  
Rock Burst ◽  
Research Work ◽  
High Energy ◽  
Microseismic Monitoring ◽  
Temporal And Spatial Distribution ◽  
High Position ◽  
Main Research ◽  
Working Face ◽  
Mining Safety ◽  
Seam Mining

Rock burst has become one of the most serious world’s problems in coal resources mining, and fracture and movement of thick and hard strata in high position is the main reason to induce strong mining earthquake and rock burst. Multicoal seam mining of 10302 working face in Baodian coal mine is selected as an engineering background, which has thick and hard strata in high position. Using SOS microseismic monitoring system to collect microseismic events and date during multicoal seam mining, characteristic and difference of microseismic in multicoal seam mining under thick and hard rock in high position is analyzed systematically. The main research work is as follows: reveal temporal and spatial distribution and evolution law of microseismic and analyze difference and correlation of microseismic in multicoal mining under thick and hard strata in high position, especially the relationship between mining earthquake with high energy and fracture and movement of thick and hard strata in high position. With the characteristics of microseismic, rock burst mechanism and difference induced by thick and hard strata in high position are discussed. The research and achievement could make guidance to multicoal seam mining safety under thick and hard strata in high position.

scholarly journals An Approach to Dynamic Disaster Prevention in Strong Rock Burst Coal Seam under Multi-Aquifers: A Case Study of Tingnan Coal Mine

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7287
Author(s):  
Xinxin Zhou ◽  
Zhenhua Ouyang ◽  
Ranran Zhou ◽  
Zhenxing Ji ◽  
Haiyang Yi ◽  
...  
Keyword(s):  
Rock Burst ◽  
Coal Mine ◽  
Water Inrush ◽  
Coal Seams ◽  
High Position ◽  
Integrated Method ◽  
Working Face ◽  
Strong Rock ◽  
And Control

In order to prevent the multi-dynamic disasters induced by rock burst and roof water inrush in strong rock burst coal seams under multi-aquifers, such as is the case with the 207 working face in the Tingnan coal mine considered in this study, the exhibited characteristics of two types of dynamic disasters, namely rock burst and water inrush, were analyzed. Based on the lithology and predicted caving height of the roof, the contradiction between rock burst and water inrush was analyzed. In light of these analyses, an integrated method, roof pre-splitting at a high position and shattering at a low position, was proposed. According to the results of numerical modelling, pre-crack blasting at higher rock layers enables a cantilever roof cave in time, thereby reducing the risk of rock burst, and pre-crack blasting at underlying rock layers helps increase the crushing degree of the rock, which is beneficial for decreasing the caving height of rock layers above goaf, thereby preventing the occurrence of water inrush. Finally, the proposed method was applied in an engineering case, and the effectiveness of this method for prevention and control of multi-dynamics disasters was evaluated by field observations of the caving height of rock layers and micro-seismic monitoring. As a result, the proposed method works well integrally to prevent and control rock burst and water inrush.

scholarly journals Research on Mechanism of Rock Burst in Key Working Faces under Thick Magmatite in Deep Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
WeiLi Yang ◽  
ZhiZeng Zhang ◽  
QuanDe Wei ◽  
XiaoCheng Qu ◽  
JingLin Wen
Keyword(s):  
Rock Burst ◽  
Control Measures ◽  
Mine Pressure ◽  
Shock Bump ◽  
Deep Mine ◽  
Speed Reduction ◽  
Working Face ◽  
Mining Safety ◽  
Prevention And Control Measures ◽  
And Control

The rock burst of key working faces under the thick hard rock in deep mine significantly threatens the mining safety of deep mine. In this study, the key working faces under typical deeply buried thick magmatite were adopted as the engineering background. The mine pressure characteristics during the mining in key working faces under thick magmatite in deep mine were measured and analyzed. Then, the evolution of overburden strata structure under the control of thick magmatite was explored based on the theory of mine pressure to conclude that the horizontal “carrier” load of broken rock beam, the vertical “loader” load, and the shock bump load from thick magmatite fracture are main sources of force behind the burst. Finally, the mechanism of rock burst was studied on the basis of the balanced relationship between loading and bearing. According to the results of research, the burst in key working faces under thick magmatite in deep mine was actually the instability burst of the key working face block. The bearing capacity and load of key working face block were constantly changing during the unstable movement of thick magmatite. The rock burst would occur in the event of any instability during the dynamic confrontation of “loading-bearing”. As per different burst sources, it could be divided into flexural loading burst of thick magmatite and shock bump burst of thick magmatite fracture. The mechanical conditions for each of the two bursts and the width calculation formula for the key working face free from overall instability burst were deduced. The research results were applied to key working face 12310. Meanwhile, the purpose of safe production following the principle of “No disaster in bumps, no harm under burst” was realized by implementing the “Four Keys” comprehensive prevention and control measures of “key monitoring + key speed reduction + key pressure relief + key support”.

scholarly journals Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Quansen Wu ◽  
Peng Kong ◽  
Quanlin Wu ◽  
Xinggang Xu ◽  
Xingyu Wu ◽  
...  
Keyword(s):  
Rock Burst ◽  
Coal Pillar ◽  
Local Deformation ◽  
Overburden Rock ◽  
High Position ◽  
Rock Bursts ◽  
Fault Activation ◽  
Working Face ◽  
Prediction And Prevention ◽  
Geological Conditions

Fault activation triggers local deformation and dislocation, releasing a large amount of energy that can easily cause mining disasters, such as rock bursts and roadway instability. To study the changing characteristics of overburden structures and the evolution law of mining-induced stress as panel advances towards a fault from a footwall, two similar models were established, namely, a simulation experimental model and a numerical simulation model. In addition, the relationship among mining, mining stress, and rock bursts induced by fault activation was investigated. The results of this study reveal that when the working face is 30 m away from the fault, the high-position rock mass near the fault turns to the goaf where the fault is activated, and the two walls display relatively obvious dislocation. During the process of footwall panel mining to the fault, the abutment stress of the coal pillar tends to increase initially, followed by a decrease. When the working face is 20 m away from the fault, the abutment stress ahead of the working face reaches its maximum. When the width of the coal pillar is within the range of 10–40 m, the coal pillar accumulates a large amount of energy, and the working face affected by the fault easily induces a rock burst. Before fault activation, disturbances arising from the mining activities destroy the equilibrium stress environment of the rock system surrounding the fault, and the fault continuously accumulates energy. When the accumulated energy reaches a certain threshold, under the action of normal stress or shear stress, the fault will be activated, and a large amount of energy will be released, which can easily induce a rock burst. The research results in this paper provide a scientific basis for the classification, prediction, and prevention of rock bursts under similar geological conditions.

scholarly journals Study on Dynamic Behavior Law and Microseismic Monitoring in Stoping Process of Roadway with High Gas and Wide Coal Pillar

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Baobin Gao ◽  
Chuangnan Ren ◽  
Qun Dong ◽  
Liwei Chen
Keyword(s):  
Coal Seam ◽  
Rock Burst ◽  
Dynamic Characteristics ◽  
Coal Pillar ◽  
Microseismic Monitoring ◽  
Coal Industry ◽  
Gas Pressure ◽  
Pillar Width ◽  
Working Face ◽  
Microseismic Activity

In order to study the dynamic characteristics and microseismic distribution in the mining process of roadway with high gas and wide coal pillar, combined with the two dynamic events of N2105 working face in Yuwu Coal Industry, theoretical analysis and field measurement research were carried out. According to the theory of structural mechanics and geomechanics, the causes of dynamic appearance are analyzed. Combined with the specific situation, the influence of mining depth, coal pillar width, gas pressure, and content on the dynamic performance is analyzed. Stress monitoring and microseismic monitoring are carried out on one side of coal seam. The results show that, with the increase of the mining distance, the backside roof of the goaf is prone to unbalanced fracture due to the lack of lateral stress, and the impact pressure generated is used for the reserved protective coal pillar behind the goaf, causing the floor heave of coal seam. The combined stress generated by the anticlinal structure below the working face interacts with the abutment pressure of the working face to produce superposition effect, which promotes the occurrence of dynamic appearance. The critical depth of rock burst in Yuwu Coal Industry is about 600m. The increase of coal elastic energy caused by roof subsidence is more uniform with the increase of coal pillar width. The decrease of gas pressure in coal seam promotes the rock burst disaster. The vertical stress of coal seam at one side of the working face shows different evolution characteristics along the trend and strike. The vertical stress of coal seam in the lateral range of 53 m is adjusted to different degrees and tends to be stable until 300 m behind the working face. The active microseismic area in the middle of the working face was located 50 m in front of the working face, and the microseismic activity continued to 30–50 m behind the working face. The active microseismic area at the side of the roadway was located 30 m in front of the working face, and the microseismic activity continued to 100–180 m behind the working face. The inflection point, where the stress in the elastic area of coal pillar increases sharply, corresponds to the active microseismic area, which indicates that the dynamic characteristics in the mining process of roadway with high gas and wide coal pillar are related to the distribution law of microseismic. This study has a certain guiding significance for optimizing the width of reserved coal pillar, monitoring the coal seam stress/microseismic, and understanding the dynamic disaster of coal and rock under complex conditions.

scholarly journals Investigation of the Optimal Layout of the Roadway in Closely Spaced Ultra-Thick Coal Seams Mining with Remaining Coal Pillars

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Bin Zhao ◽  
Le Gao ◽  
Xianghui Tian ◽  
Yingyu Sun
Keyword(s):  
Stress Reduction ◽  
Site Investigation ◽  
High Water ◽  
High Water Content ◽  
Thick Coal Seam ◽  
Working Face ◽  
Mining Safety ◽  
Coal Pillars ◽  
The Stability ◽  
Seam Mining

The reasonable layout of the roadway in closely spaced, ultra-thick coal seam mining is of great significance to mining safety. Based on the research background of repeated roof leaks in the process of repairing the return air roadway in working face No. 30503 in the Tashan Coal Mine, theoretical analysis, in situ engineering testing, and numerical simulation were jointly adopted to evaluate the stability of the return air roadway under two schemes of repairing the original return air roadway and excavating a new return air roadway. The results show that the vertical mining-induced fissure above the roadway will cause severe damage to the roadway due to the influence of working-face mining when restoration of the roadway excavation is adopted. When choosing to excavate a new return air roadway, the new return air roadway just staggers the vertical cracks located in the top slab of the original return air roadway, putting the roadway in a state of stress reduction, making the roadway itself more stable and conducive to support. Therefore, the new air return tunnel was selected to establish the working face. To ensure safety of the working face during the mining of the original return air roadway, the original return air roadway was filled with high water content materials. Site investigation data show that this material plays a cushioning role in the filling section of the original return air roadway during the mining of the 30503 working face, and the deformation of the new return air roadway during the filling section crossing the original return roadway is stable and well controlled.

scholarly journals Main Roof Breakage and Vibration Induced Coal Burst Occurring in Longwall Roadways

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Shuangwen Ma ◽  
Chen Cao ◽  
Qianjia Hui
Keyword(s):  
Rock Burst ◽  
Longwall Mining ◽  
Elastic Beam ◽  
Main Roof ◽  
Coal Mass ◽  
Beam Model ◽  
Working Face ◽  
Mining Safety ◽  
Ground Stress ◽  
Dominant Vibration Frequency

Rock burst is one major threat to mining safety and economy. Rock burst occurring in the longwall mining roadway accounts for 85% of the total amount of burst events. This paper investigates the causality mechanism of rock burst in longwall roadways by establishing a finite elastic beam model in the working face based on the elastic foundation theory. The breakage process of the main roof and related dynamic effects are analysed. The result shows that the movement of the main roof shows free vibration under certain damping resistance. It is also found that the roof dominant vibration frequency increases with the increase in the thickness and elastic modulus of the roof. During roof vibration, the vertical stress applied on the coal mass is unloaded. The destressing of the roof-coal interface causes the coal mass in the roadway rib to slip into the roadway under the horizontal ground stress, resulting in rock burst. The possibility of rock burst increases with increase in the strength and thickness of the roof and horizontal ground stress within the coal mass. This mechanism explains the occurrence of rock burst in the mining roadway; it provides the fundamental theory for the prevention and controlling technologies of longwall roadway rock burst.

Prediction of rockbursts in a typical island working face of a coal mine through microseismic monitoring technology

2021 ◽  
Vol 113 ◽  
pp. 103972
Author(s):  
Chao Zhang ◽  
Gaohan Jin ◽  
Chao Liu ◽  
Shugang Li ◽  
Junhua Xue ◽  
...  
Keyword(s):  
Coal Mine ◽  
Microseismic Monitoring ◽  
Monitoring Technology ◽  
Working Face

scholarly journals Modified Nanoclays/Straw Fillers as Functional Additives of Natural Rubber Biocomposites

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 799
Author(s):  
Justyna Miedzianowska ◽  
Marcin Masłowski ◽  
Przemysław Rybiński ◽  
Krzysztof Strzelec
Keyword(s):  
Natural Rubber ◽  
Raw Materials ◽  
Research Work ◽  
Damping Properties ◽  
Main Research ◽  
Functional Additives ◽  
Different Types ◽  
Elastomeric Materials ◽  
Research Goal ◽  
The Impact

Increasingly, raw materials of natural origin are used as fillers in polymer composites. Such biocomposites have satisfactory properties. To ensure above-average functional properties, modifications of biofillers with other materials are also used. The presented research work aimed to produce and characterize elastomeric materials with a straw-based filler and four different types of montmorillonite. The main research goal was to obtain improved functional parameters of vulcanizates based on natural rubber. A series of composites filled with straw and certain types of modified and unmodified nano-clays in various ratios and amounts were prepared. Then, they were subjected to a series of tests to assess the impact of the hybrids used on the final product. It has been shown that the addition of optimal amounts of biofillers can, inter alia, increase the tensile strength of the composite, improve damping properties, extend the burning time of the material and affect the course of vulcanization or cross-linking density.

scholarly journals The Impact of the Coexistence of Methane Hazard and Rock-Bursts on the Safety of Works in Underground Hard Coal Mines

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 128
Author(s):  
Justyna Swolkień ◽  
Nikodem Szlązak
Keyword(s):  
Rock Burst ◽  
Methane Concentration ◽  
High Energy ◽  
Hard Coal ◽  
Coal Seams ◽  
Safety Level ◽  
Methane Drainage ◽  
Innovative Methods ◽  
Hard Coal Mining ◽  
The Impact

Several natural threats characterize hard coal mining in Poland. The coexistence of methane and rock-burst hazards lowers the safety level during exploration. The most dangerous are high-energy bumps, which might cause rock-burst. Additionally, created during exploitation, safety pillars, which protect openings, might be the reason for the formation of so-called gas traps. In this part, rock mass is usually not disturbed and methane in seams that form the safety pillars is not dangerous as long as they remain intact. Nevertheless, during a rock-burst, a sudden methane outflow can occur. Preventing the existing hazards increases mining costs, and employing inadequate measures threatens the employees’ lives and limbs. Using two longwalls as examples, the authors discuss the consequences of the two natural hazards’ coexistence. In the area of longwall H-4 in seam 409/4, a rock-burst caused a release of approximately 545,000 cubic meters of methane into the excavations, which tripled methane concentration compared to the values from the period preceding the burst. In the second longwall (IV in seam 703/1), a bump was followed by a rock-burst, which reduced the amount of air flowing through the excavation by 30 percent compared to the airflow before, and methane release rose by 60 percent. The analyses presented in this article justify that research is needed to create and implement innovative methods of methane drainage from coal seams to capture methane more effectively at the stage of mining.

Sign in / Sign up

Export Citation Format

Share Document