scholarly journals Optimum Building Design Variables in a Warm Saharan Mediterranean Climate Zone

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Aiman Albatayneh ◽  
Tarek Tayara ◽  
Mustafa Jaradat ◽  
Murad Al-Omary ◽  
Muna Hindiyeh ◽  
...  
Keyword(s):  
Residential Buildings ◽  
Building Design ◽  
Normal Structure ◽  
Ventilation Rate ◽  
Natural Rate ◽  
Climate Zone ◽  
Heating And Cooling ◽  
Roof Structure ◽  
Design Variables ◽  
Window Blinds

This research contributes to making residential buildings more efficient in the city of Azraq, Jordan, which is located in a warm climate zone in the Saharan Mediterranean region (classified as a hot desert climate according to the Köppen climate classification). It involved the optimisation of several envelope parameters with the aim of reducing the usage of energy within a normal structure occupying an area of 186 m2 without the occupants’ involvement in saving energy in the building to solely measure the building envelope’s thermal performance. The DesignBuilder software was used for the sensitivity analysis using 12 design variables, which enabled their significance for both cooling and heating loads. The selected variables were separated into two categories based on their level of significance: a group with higher importance (window to wall %, local type of shading, ground floor building, natural rate of ventilation, rate of infiltration, kind of glazing, and flat roof structure) as well as a group with lower importance (partition construction, site position, construction of outside walls, kind of window blinds, and window shade control timetable); these variables will save a significant amount of heating and cooling energy.

scholarly journals The Significance of Building Design for the Climate

2018 ◽  
Vol 22 (1) ◽  
pp. 165-178 ◽  
Author(s):  
Aiman Albatayneh ◽  
Dariusz Alterman ◽  
Adrian Page ◽  
Behdad Moghtaderi
Keyword(s):  
Thermal Performance ◽  
Ghg Emissions ◽  
Weather Conditions ◽  
Building Design ◽  
Sustainable Building ◽  
Climate Zone ◽  
Heating And Cooling ◽  
Wide Range ◽  
The Right ◽  
Different Climates

Abstract Building design is important for saving energy and reducing GHG emissions by applying passive solar heating and cooling design principles and using the right materials and appropriate design tools. This will make the home healthier and more comfortable. The design of energy efficient and sustainable buildings is critical for the future. A key aspect of any design is the realistic and accurate prediction of the performance of the building under a wide range of weather conditions. This paper examines the effect of different climate zones in Australia (which are comparable to the world's major climates) on the thermal performance of a complete building and recommended design techniques to suit each climate zone to enhance the overall thermal performance. To examine the effect of the location (different climates) on the overall thermal performance and how a good design in one location may not be suitable at another location, AccuRate will be used to assess the thermal performance for the exact module in different climates zones to allow a fair comparison to find the appropriate design for the climate where the building is located. Also, in this research, each climate zone design requirements and techniques were addressed for various climate variables (including: solar radiation, rainfall, wind speed and direction and humidity) to design sustainable building which save great amount of energy while sustaining occupants thermal comfort.

scholarly journals Effects of the geometry of residential buildings with a sunspace on their energy performance

2019 ◽  
Vol 17 (1) ◽  
pp. 105-118
Author(s):  
Ana Vukadinovic ◽  
Jasmina Radosavljevic ◽  
Amelija Djordjevic ◽  
Nemanja Petrovic
Keyword(s):  
Energy Consumption ◽  
Aspect Ratio ◽  
Shape Factor ◽  
Residential Buildings ◽  
Dynamic Modelling ◽  
Building Design ◽  
Energy Performance ◽  
Total Consumption ◽  
Heating And Cooling ◽  
Heating Energy Consumption

The increase in energy consumption in building design and construction and the issues related to environmental protection have steered many current researchers toward examining the ways to reduce total CO2 emissions, which resulted in the development of various measures to increase energy efficiency. One measure for more cost-efficient and rational use of energy resources in individual residential buildings is the application of passive solar systems with a sunspace. This paper presents the effects of the shape factor of a residential building with a passive sunspace on the total consumption of heating and cooling energy. The total amount of energy required for building heating and cooling was calculated by means of dynamic modelling using EnergyPlus software. The simulations were run according to the meteorological parameters for the city of Nis. For simulation purposes, models of residential buildings with a passive sunspace and square- and rectangle-shaped floors were designed. The variations between the models include different building shape factor, floor geometry, surface area of the southern fa?ade, and glazing percentage, i.e. window-to-wall ratio (WWR). Examination of the models with WWR=20%, WWR=40%, and WWR=60% revealed that the elongated shape of a building with the aspect ratio of 2.25:1, with the longer side of the fa?ade facing south, is the most favourable in terms of heating energy consumption. For the same WWRs, the elongated shape of a building with the aspect ratio of 1.56:1, with the longer side of the fa?ade facing south, is the most favourable in terms of cooling energy consumption. As WWR increases, so does the amount of energy required to cool the building. The biggest increase in heating energy consumption was observed in buildings with the aspect ratio 1:2.25, with the shorter side facing south.

scholarly journals A Study of Design Variables in Daylight and Energy Performance in Residential Buildings under Hot Climates

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5836
Author(s):  
Ali Mohammed AL-Dossary ◽  
Daeung Danny Kim
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Total Energy Consumption ◽  
Design Variables ◽  
Slow Progress ◽  
Shading Devices

In Saudi Arabia, residential buildings are one of the major contributors to total energy consumption. Even though there are abundant natural resources, it is somewhat difficult to apply them to building designs, as design variables, due to slow progress and private issues in Saudi Arabia. Thus, the present study demonstrated the development of sustainable residential building design by examining the daylighting and energy performance with design variables. Focusing on the daylighting system, the design variables were chosen, including window-to-wall ratios (WWR), external shading devices, and types of glazing. The illuminance level by these design variables in a building was evaluated by using daylight metrics, such as spatial daylight autonomy and annual sunlight exposure. Moreover, the building energy consumption with these design variables was analyzed by using energy simulation. As a result, the daylighting was improved with the increase in WWRs and the tinted double glazing, while these design options can cause overheating in a residential building. Among types of glazing, the double pane windows with a low-E coating showed better energy performance. Based on the results, it is necessary to find the proper design variables that can balance the daylighting and energy performance in residential buildings in hot climates.

scholarly journals Sensitivity analysis optimisation of building envelope parameters in a sub-humid Mediterranean climate zone

2021 ◽  
pp. 014459872110204
Author(s):  
Aiman Albatayneh
Keyword(s):  
Sensitivity Analysis ◽  
Natural Ventilation ◽  
Mediterranean Climate ◽  
Residential Buildings ◽  
Infiltration Rate ◽  
Building Envelope ◽  
Mountainous Area ◽  
Total Energy Consumption ◽  
Climate Zone ◽  
Design Variables

The primary goal of this research was to minimise the energy consumed by heating and cooling loads in residential buildings in a sub-humid Mediterranean climate zone. This was achieved by optimising the design variables of various building envelopes using DesignBuilder software to compare the thermal performance of a baseline building model located in Ajlun (city in northern Jordan mountainous area) with the performance of other buildings with various design configurations. A sensitivity analysis (SA) was then conducted for twelve design variables to evaluate their influence on both cooling and heating loads using a regression method. The variables were divided into two groups according to their importance: a high importance design variables (window to wall ratio, local shading type, round floor construction, natural ventilation rate, infiltration rate (ac/h), glazing type, flat roof construction) and a low importance design variables (partition construction, site orientation, external wall construction, window blind type, window shading control schedule).The final results show significant reduction in the total energy consumption.

Application of Phase Change Materials in Construction Materials for Thermal Energy Storage Systems in Buildings

2021 ◽  
pp. 1-20
Author(s):  
Eray Mertkan Meric ◽  
Savas Erdem ◽  
Ezgi Gurbuz
Keyword(s):  
Energy Consumption ◽  
Phase Change Materials ◽  
Residential Buildings ◽  
Construction Materials ◽  
Building Design ◽  
World Population ◽  
Total Consumption ◽  
Heating And Cooling ◽  
Thermal Energy Storage Systems ◽  
Developed World

There has been a continuous increase in world population and industrialization. In parallel, energy consumption grew substantially in the world. The residential buildings constitute the majority of the total consumption in the developed world. Therefore, energy saving and reducing heat losses of buildings are of major concern for our society. At this point, phase changing materials (PCMs) show up as one of the most useful materials in building design. In this study, PCMs, which are used at places such as facade of buildings, bricks, and inside of concrete in order to be able to reduce the energy consumption due to heating and cooling, to provide comfort temperature inside buildings, are extensively reviewed.

scholarly journals Effects of Architectural Space Layouts on Energy Performance: A Review

2020 ◽  
Vol 12 (5) ◽  
pp. 1829 ◽  
Author(s):  
Tiantian Du ◽  
Sabine Jansen ◽  
Michela Turrin ◽  
Andy van den Dobbelsteen
Keyword(s):  
Natural Ventilation ◽  
Energy Use ◽  
Building Design ◽  
Energy Performance ◽  
Office Building ◽  
Design Parameters ◽  
Heating And Cooling ◽  
Design Variables ◽  
Occupant Comfort ◽  
The Uk

As one of the most important design tasks of building design, space layout design affects the building energy performance (BEP). In order to investigate the effect, a literature review of relevant papers was performed. Ten relevant articles were found and reviewed in detail. First, a methodology for studying the effects of space layouts on BEP were proposed regarding design variables, energy indicators and BEP calculation methods, and the methodologies used in the 10 articles were reviewed. Then, the effects of space layouts on energy use and occupant comfort were analysed separately. The results show that the energy use for heating, cooling, lighting and ventilation is highly affected by space layouts, as well as thermal and visual comfort. The effects of space layouts on energy use are higher than on occupant comfort. By changing space layouts, the resulting reductions in the annual final energy for heating and cooling demands were up to 14% and 57%, respectively, in an office building in Sweden. The resulting reductions in the lighting demand of peak summer and winter were up to 67% and 43%, respectively, for the case of an office building in the UK, and the resulting reduction in the air volume supplied by natural ventilation was 65%. The influence of other design parameters, i.e., occupancy and window to wall ratio, on the effects of space layouts on BEP was also identified.

scholarly journals Optimising the Parameters of a Building Envelope in the East Mediterranean Saharan, Cool Climate Zone

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 43
Author(s):  
Aiman Albatayneh
Keyword(s):  
Residential Buildings ◽  
Building Envelope ◽  
Cooling Load ◽  
Total Energy Consumption ◽  
Heating And Cooling ◽  
Design Variables ◽  
Heating Load ◽  
Wall Construction ◽  
Optimum Solution ◽  
Cooling Loads

Enhancing the energy efficiency and environmental sustainability of buildings is a significant global aim. New construction regulations are, therefore, geared specifically towards low-emission and energy-efficient projects. However, there are numerous and typically competitive priorities, such as making the most of energy usage in residential buildings. This leads to the complex topic of multi-objective optimisation. The primary aim of this research was to reduce the energy consumed for heating and cooling loads in residential buildings in Ma’an City, which is located in the Jordanian Saharan Mediterranean, a cool climate zone. This was achieved by optimising various design variables (window to wall percent, ground floor construction, local shading type, infiltration rate (ac/h), glazing type, flat roof construction, natural ventilation rate, window blind type, window shading control schedule, partition construction, site orientation and external wall construction) of the building envelope. DesignBuilder software (version 6.1) was utilised to run a sensitivity analysis (SA) for 12 design variables to evaluate their influence on both heating and cooling loads simultaneously using a regression method. The variables were divided into two groups according to their importance and a genetic algorithm (GA) was then applied to both groups. The optimum solution selected for the high-importance variables was based on minimising the heating and cooling loads. The optimum solution selected for the low-importance variables was based on the lowest summation of the heating and cooling loads. Finally, a scenario was devised (using the combined design variables of the two solutions) and simulated. The results indicate that the total energy consumption was 1186.21 kWh/year, divided into 353.03 kWh/year for the cooling load and 833.18 kWh/year for the heating load. This was compared with 9969.38 kWh/year of energy, divided into 3878.37 kWh/year for the heating load and 6091.01 kWh/year for the cooling load for the baseline building. Thus, the amount of energy saved was 88.1%, 94.2% and 78.5% for total energy consumption, cooling load and heating load, respectively. However, implementing the modifications suggested by the optimisation of the low-importance variables was not cost-effective, especially the external wall construction and partition construction, and therefore these design variables can be neglected in future studies.

scholarly journals Heating and Cooling Degree-Days Climate Change Projections for Portugal

Atmosphere ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 715
Author(s):  
Cristina Andrade ◽  
Sandra Mourato ◽  
João Ramos
Keyword(s):  
Climate Change ◽  
High Resolution ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Residential Buildings ◽  
Degree Days ◽  
Climate Change Projections ◽  
Heating And Cooling ◽  
Cooling Degree Days ◽  
Heating Energy Demand

Climate change is expected to influence cooling and heating energy demand of residential buildings and affect overall thermal comfort. Towards this end, the heating (HDD) and cooling (CDD) degree-days along with HDD + CDD were computed from an ensemble of seven high-resolution bias-corrected simulations attained from EURO-CORDEX under two Representative Concentration Pathways (RCP4.5 and RCP8.5). These three indicators were analyzed for 1971–2000 (from E-OBS) and 2011–2040, and 2041–2070, under both RCPs. Results predict a decrease in HDDs most significant under RCP8.5. Conversely, it is projected an increase of CDD values for both scenarios. The decrease in HDDs is projected to be higher than the increase in CDDs hinting to an increase in the energy demand to cool internal environments in Portugal. Statistically significant linear CDD trends were only found for 2041–2070 under RCP4.5. Towards 2070, higher(lower) CDD (HDD and HDD + CDD) anomaly amplitudes are depicted, mainly under RCP8.5. Within the five NUTS II

Sign in / Sign up

Export Citation Format

Share Document