scholarly journals Graphene Oxide/Polyvinyl Alcohol/Fe3O4 Nanocomposite: An Efficient Adsorbent for Co(II) Ion Removal

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Thu Dieu Le ◽  
Luyen Thi Tran ◽  
Hue Thi Minh Dang ◽  
Thi Thu Huyen Tran ◽  
Hoang Vinh Tran
Keyword(s):  
Graphene Oxide ◽  
Polyvinyl Alcohol ◽  
Order Kinetic ◽  
Maximum Sorption Capacity ◽  
Ion Removal ◽  
Maximum Sorption ◽  
Order Kinetic Model ◽  
Metal Treatment ◽  
Pseudo Second Order ◽  
Adsorption Of Co2

In this work, an effective nanocomposite-based adsorbent directed to adsorb cobalt (Co2+) ion was successfully synthesized from graphene oxide (GO), polyvinyl alcohol (PVA), and magnetite (Fe3O4) nanoparticles via a coprecipitation technique. The synthesized GO/PVA/Fe3O4 nanocomposite was applied for Co2+ ion removal with the optimized working conditions including 100 min of contact time, 0.01 g of adsorbent dosage, pH of 5.2, and 50°C of temperature. The investigation of adsorption kinetics showed that the adsorption of Co2+ ion onto the GO/PVA/Fe3O4 nanocomposite followed the pseudo-second-order kinetic model with the rate constant k2 being 0.0026 (g mg−1·min−1). The Langmuir model is suitable to describe the adsorption of Co2+ ion onto the GO/PVA/Fe3O4 nanocomposite with the maximum sorption capacity (qmax) reaching 373.37 mg·g−1. The obtained results also indicated that the GO/PVA/Fe3O4 nanocomposite can adsorb/regenerate for at least 5 cycles with a little reduction in removal efficiency. Therefore, we believe that the GO/PVA/Fe3O4 nanocomposite could be used as a potential adsorbent for heavy metal treatment in terms of high adsorption capacity, fast adsorption rate, and recyclability.

Kinetics and adsorption equilibrium of some radionuclides on polyaniline/SiO2 composite

2021 ◽  
Vol 109 (2) ◽  
pp. 85-97
Author(s):  
Abeer E. Kasem ◽  
Ezzat A. Abdel-Galil ◽  
Nabil Belacy ◽  
Nagwa A. Badawy
Keyword(s):  
Adsorption Equilibrium ◽  
Sorption Process ◽  
Sorption Kinetics ◽  
Sorption Behavior ◽  
Order Kinetic ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Abstract The sorption kinetics and equilibrium isotherms of zirconium, uranium, and molybdenum ions onto synthetic polyaniline/SiO2 composite (PAn/SiO2) have been studied using batch-sorption techniques. This study was carried out to examine the sorption behavior of the PAn/SiO2 for the removal of Zr(IV), U(VI), and Mo(VI) ions from an aqueous solution. The influence of some parameters on the sorption process was also studied. The maximum sorption for Zr(IV), U(VI), and Mo(VI) ions was achieved at 60 min shaking time. Langmuir isotherm model is the most representative for discussing the sorption process with a maximum sorption capacity of 24.26, 21.82, and 13.01 mg/g for Zr(IV), U(VI), and Mo(VI) ions, respectively. Kinetic modeling revealed that the sorption of all ions follows the pseudo-second-order kinetic model. The results demonstrated that both the external and intra-particular diffusion are taken into account in determining the sorption rate. Thermodynamic parameters like ΔG°, ΔH°, and ΔS° for the sorption process were evaluated. The synthetic composite has been successfully applied for the removal and recovery of U(VI) ions from real solution (monazite leachate) using a chromatographic column packed with PAn/SiO2 composite with a breakthrough capacity equal to 239.70 mg/g.

scholarly journals Biochar from Maize Hybrid Fermentation Residuelow Cost and Efficient Heavy Metals Sorbent

2019 ◽  
Vol 26 (4) ◽  
pp. 743-757
Author(s):  
Michaela Tokarčíková ◽  
Jana Seidlerová ◽  
Oldřich Motyka ◽  
Mirka Šafaříková
Keyword(s):  
Experimental Data ◽  
Contact Time ◽  
Low Cost ◽  
Order Kinetic ◽  
Leaching Test ◽  
Maize Hybrid ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract Biochar produced from fermentation residue of maize hybrid was used in untreated form as a sorbent for the removal of Cd(II), Pb(II) and Zn(II) from aqueous solution. The capability of biochar to immobilized ions was investigated by leaching test. Equilibrium between biochar sample and studied elements in solution was reached at a contact time 30 min for Zn(II) and 90 min for Pb(II) and Cd(II). The experimental data were described by pseudofirst-order and pseudo-second-order kinetic model, two- and three-parameter isotherms in non-linear form. The maximum sorption capacity achieved was 30.07 mg·g−1 in the case of Cd(II) ions, 99.44 mg·g−1 in the case of Pb(II) and 40.18 in the case of Zn(II). Biochar developed for this study is comparable to conventional biochar, low cost, non-toxic and experimental results show that is a suitable and efficient sorbent for Cd(II), Pb(II) and Zn(II) removal from aqueous solutions.

Retention behavior of anionic radionuclides using metal hydroxide sludge

2019 ◽  
Vol 107 (12) ◽  
pp. 1161-1172 ◽  
Author(s):  
Mostafa M. Hamed ◽  
I. M. Ahmed ◽  
M. Holiel
Keyword(s):  
Nuclear Power ◽  
Metal Hydroxide ◽  
Order Kinetic ◽  
Factors Affecting ◽  
Maximum Sorption Capacity ◽  
Security Issues ◽  
Maximum Sorption ◽  
Order Kinetic Model ◽  
Anionic Species ◽  
Pseudo Second Order

Abstract With the speedy growth of nuclear power production, the removal and disposal of radioactive nuclides such as 129I, 99Tc, 79Se, 36Cl, 93Mo, and 137Cs become major environmental security issues. Retention of these radionuclides, especially anionic species such as 129I (t1/2 1.7 × 107 years), 93Mo (t1/2 4 × 103 years) and 79Se (t1/2 3.27 × 105 years) has been challenging. 129I, 93Mo and 79Se bind very weakly to most sorbents and deposits. This study has examined the sorption potential of Metal hydroxide sludge (MHS) for 125I (t1/2 60.2 days), 99Mo (t1/2 2.75 days) and 75Se (t1/2 120 days) as a surrogate for 129I, 93Mo and 79Se, respectively. MHS has been characterized by different techniques and the factors affecting the sorption processes were investigated. The experimental data were analyzed using kinetic models and thermodynamic parameters. The results showed that the kinetics of sorption of 125I and 99Mo on MHS proceeds according to the pseudo-first-order, on the contrary of 75Se sorption follows pseudo second-order kinetic model. The maximum sorption capacity of MHS was found to be 51.2 mg/g, 46.5 mg/g and 40.2 mg/g for 125I, 99Mo and 75Se, respectively. It can be concluded that, in the case of release of anionic radionuclide species to the surroundings the MHS could act as a succeeded and economical sorbent material for retention of different anionic radionuclides such as 133, 129I, 79Se, 36Cl, 93, 99Mo, and 99Tc. To avoid the release of such anionic species from the stored nuclear wastes to the environment.

scholarly journals Nickel (II) sorption from aqueous media by Agave salmiana as biosorbent

2019 ◽  
Vol 17 (3) ◽  
Author(s):  
D. M. Sánchez Nava ◽  
H. López González ◽  
M. T. Olguín ◽  
S. Bulbulian
Keyword(s):  
Heavy Metal ◽  
Aqueous Media ◽  
Second Order ◽  
Order Kinetic ◽  
Sorption Data ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Agave Salmiana ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this work, the removal of nickel from aqueous solutions by Agave salmiana was investigated. For this purpose the removal of this heavy metal (Ni2+) was carried out in a batch system as a function of contact time, pH, and the initial concentration of the metallic specie in solution. The sorption data were fitted to pseudo-first order and pseudo-second order kinetic models to found the parameteres which describe the processes. It was found that the maximum sorption of the Agave for Ni2+ was at pH 10 and pseudo-second order kinetic model well described the biosorption behavior of this heavy metal by the non-living biomass. Furthermore, the maximum sorption capacity obtained from the isotherm was 10 mgNi/gAgave.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

scholarly journals Uranium (VI) Recovery from Black Shale Leaching Solutions Using Ion Exchange: Kinetics and Equilibrium Studies

Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 689
Author(s):  
Omirserik Baigenzhenov ◽  
Alibek Khabiyev ◽  
Brajendra Mishra ◽  
M. Deniz Turan ◽  
Merey Akbarov ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Sorption Isotherm ◽  
Room Temperature ◽  
Sorption Kinetics ◽  
Second Order ◽  
Order Kinetic ◽  
Strong Base ◽  
Maximum Sorption Capacity ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This work studies the removal of uranium ions from chemically leached solutions by sorption using two weak and two strong base anionites. Batch sorption experiments were performed to evaluate the optimum conditions at pH 1.2–2.2, 1.0 g resin dose for 1–12 h contact time at room temperature. These experiments addressed sorption kinetics and sorption isotherm. The maximum sorption capacity reached 55.8 mg/g at room temperature. The kinetics data are well described by the pseudo-second-order kinetic model at initial uranium concentration of 0.62 mg·L−1. To describe sorption kinetics pseudo-first-order, pseudo-second-order and intraparticle diffusion models were proposed. Studies indicated that the sorption of uranium can be fitted by a pseudo-second-order kinetic model very well. Equilibria were described by Langmuir, Freundlich, and Dubinin–Radushkevich equations. The experimental sorption isotherm is successfully described by the Langmuir model.

scholarly journals Equilibrium and kinetics studies for the adsorption of Ni2+ and Fe3+ ions from aqueous solution by graphene oxide

2017 ◽  
Vol 19 (3) ◽  
pp. 120-129 ◽  
Author(s):  
Wojciech Konicki ◽  
Małgorzata Aleksandrzak ◽  
Ewa Mijowska
Keyword(s):  
Graphene Oxide ◽  
Kinetic Model ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Intraparticle Diffusion Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, the adsorption of Ni2+ and Fe3+ metal ions from aqueous solutions onto graphene oxide (GO) have been explored. The effects of various experimental factors such as pH of the solution, initial metal ion concentration and temperature were evaluated. The kinetic, equilibrium and thermodynamic studies were also investigated. The adsorption rate data were analyzed using the pseudo-first-order kinetic model, the pseudo-second-order kinetic model and the intraparticle diffusion model. Kinetic studies indicate that the adsorption of both ions follows the pseudo-second-order kinetics. The isotherms of adsorption data were analyzed by adsorption isotherm models such as Langmuir and Freundlich. Equilibrium data fitted well with the Langmuir model. The maximum adsorption capacities of Ni2+ and Fe3+ onto GO were 35.6 and 27.3 mg g−1, respectively. In addition, various thermodynamic parameters, such as enthalpy (ΔHO), entropy (ΔSO) and Gibbs free energy (ΔGO), were calculated.

scholarly journals Effect of Water Chemistry on the Uptake of Co(II) on Graphene Oxide Investigated by Batch Technique

2021 ◽  
Vol 20 (3) ◽  
Author(s):  
X. Tang ◽  
J. Luo ◽  
L. Wang ◽  
X. Li
Keyword(s):  
Graphene Oxide ◽  
Ionic Strength ◽  
Kinetic Studies ◽  
Inhibitory Effect ◽  
Order Kinetic ◽  
Temperature Dependent ◽  
Environmental Application ◽  
Batch Technique ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The uptake of Co(II) on graphene oxide (GO) by an adsorption process as a function of pH and ionic strength in the absence and presence of humic acid (HA) or fulvic acid (FA) was studied using batch technique. The results indicated that the uptake is strongly dependent on pH but independent of ionic strength. A stimulative effect of HA/FA on Co(II) uptake was found at pH < 7.0, whereas an inhibitory effect was observed at pH > 7.0. Kinetic studies suggest that Co(II) uptake on GO could be described more favorably by the pseudo-second-order kinetic model. The uptake isotherms can be described better by the Langmuir, Freundlich, and D-R models than by the linear model. The thermodynamic data calculated from the temperature-dependent uptake isotherms suggests that the uptake of Co(II) on GO is spontaneous and endothermic. Results of this work are of great importance for the environmental application of GO in the treatment of Co(II) from wastewater and indicated that GO is promising for the natural attenuation of Co(II) and related metal ions from aqueous solution.

scholarly journals Synthesis of cross-linking chitosan-PVA composite hydrogel and adsorption of Cu(II) ions

2020 ◽  
Vol 81 (5) ◽  
pp. 1063-1070 ◽  
Author(s):  
Qingping Song ◽  
Jiangang Gao ◽  
Ying Lin ◽  
Ze Zhang ◽  
Yixin Xiang
Keyword(s):  
Chemical Properties ◽  
Acid Resistance ◽  
Strong Acid ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Ion Removal ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range ◽  
Physical And Chemical

Abstract A cross-linked chitosan-PVA spherical hydrogel (CSH) was synthesized and its structure was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The physical and chemical properties of CSH, such as acid resistance and swelling, were determined. Finally, Cu(II) ion removal by the CSH was investigated, and the effects of experimental parameters, including pH, adsorption time, and regeneration performance were examined. Results revealed that CSH has outstanding stability in strong acid solution, thus extending the useful pH range as an adsorbent material. The maximum capacity of CSH for Cu(II) was obtained to be 62.1 mg/g at 25 °C for 24 h. The adsorption process was best described by a pseudo-second-order kinetic model, while isotherm modeling revealed that the Langmuir equation better described the adsorption of Cu(II) on CSH. Moreover, the loaded CSH can be easily regenerated by the HCl-washing method and reused repeatedly for Cu(II) adsorption for up to five cycles.

Sign in / Sign up

Export Citation Format

Share Document