scholarly journals Effect of Rainfall Pattern and Crack on the Stability of a Red Bed Slope: A Case Study in Yunnan Province

2021 ◽  
Vol 2021 ◽  
pp. 1-21
Author(s):  
Zhenping Zhang ◽  
Xiaodong Fu ◽  
Qian Sheng ◽  
Dawei Yin ◽  
Yongqiang Zhou ◽  
...  
Keyword(s):  
Plastic Zone ◽  
Pore Water ◽  
Yunnan Province ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Small Scale ◽  
Silty Clay ◽  
The Stability ◽  
Red Bed

Red bed slopes in the southwest of China are associated with a grant number of geological hazards, such as landslides, mud-rock flows, and rock blocks falling, which are vital problems in geotechnical engineering. The damage can be induced or triggered due to a series of human and environmental activities, such as excavation, concentrated or long-term rainfall, earthquake, and fluctuation of groundwater level. According to the field observations and geological exploration results, a small-scale landslide was observed on January 10, 2016, after excavation along XiaoMo highway in Yunnan Province. A numerical model in actual size using GeoStudio software based on this typical red bed engineering slope was established in this study. Back analyses and laboratory tests were used to obtain the mechanical parameters of the geomaterial inside the slope. The historic rainfall data of Mengla County from July to September in 2016 was utilized as the flux boundary in analyzing the seepage variation features and the stability of the engineering slope in the rainy season. One major tension crack was set in the shallow region of the silty clay according to the geology survey to perform the disturbance of excavation on the geomorphology of the slope. Attempts were made to establish the anisotropic permeability of the crack induced by the complex fillings, and differences in the hydraulic response between the cracking and completed slope during the rainfall process were discussed. The result shows that the factor of safety of the slope without crack before the rainfall is 1.076, and the slope is considered in the state of the critical limit equilibrium, which is in accordance with the previous state of the slope under real conditions. The pore water pressure variations of the monitor points in the shallow region of the completed slope present close compliance with the rainfall intensity subjected to different rainfall patterns, which also controls the distribution of the plastic zone in the slope after rainfall. The comparisons in the seepage field and plastic zone between the cracking and completed slope reveal that the crack can shorten the infiltration path effectively, and the higher the permeability coefficient in the vertical direction is, the larger the pore water pressure increasing zone is and the higher the underground water level is, which should be paid more attention in highway constructions.

Analyses for the stability of potash tailings piles

1993 ◽  
Vol 30 (3) ◽  
pp. 491-505 ◽  
Author(s):  
Delwyn G. Fredlund ◽  
Zai Ming Zhang ◽  
Karen Macdonald
Keyword(s):  
Slope Stability ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Field Studies ◽  
Equilibrium Analysis ◽  
Limit Equilibrium Analysis ◽  
Dissipation Model ◽  
The Stability

The stability of potash tailings piles is investigated using a pore-water pressure generation and dissipation model together with a limit equilibrium analysis. It is found that a shallow toe failure mode is generally the most applicable and that the stability may be influenced by pore-water pressure migration below the pile. It is suggested that field studies would be useful in evaluating stability in the toe region of the pile. Key words : potash tailings, slope stability, pore pressure dissipation, solutioning.

scholarly journals Integrated Simulation Modeling Approach for Investigating Pore Water Pressure Induced Landslides

2022 ◽  
Author(s):  
Sahila Beegum ◽  
P J Jainet ◽  
Dawn Emil ◽  
K P Sudheer ◽  
Saurav Das
Keyword(s):  
Pore Water ◽  
Factor Of Safety ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Simulation Models ◽  
Integrated Simulation ◽  
Hill Slope ◽  
Slope Factor ◽  
The Stability ◽  
The Hill

Abstract Soil pore water pressure analysis is crucial for understanding landslide initiation and prediction. However, field-scale transient pore water pressure measurements are complex. This study investigates the integrated application of simulation models (HYDRUS-2D/3D and GeoStudio–Slope/W) to analyze pore water pressure-induced landslides. The proposed methodology is illustrated and validated using a case study (landslide in India, 2018). Model simulated pore water pressure was correlated with the stability of hillslope, and simulation results were found to be co-aligned with the actual landslide that occurred in 2018. Simulations were carried out for natural and modified hill slope geometry in the study area. The volume of water in the hill slope, temporal and spatial evolution of pore water pressure, and factor of safety were analysed. Results indicated higher stability in natural hillslope (factor of safety of 1.243) compared to modified hill slope (factor of safety of 0.946) despite a higher pore water pressure in the natural hillslope. The study demonstrates the integrated applicability of the physics-based models in analyzing the stability of hill slopes under varying pore water pressure and hill slope geometry and its accuracy in predicting future landslides.

Downslope movements at shallow depths related to cyclic pore-pressure changes

1993 ◽  
Vol 30 (3) ◽  
pp. 464-475 ◽  
Author(s):  
K.D. Eigenbrod
Keyword(s):  
Pore Water ◽  
Slip Surface ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Ground Surface ◽  
Soil Mass ◽  
Passive Resistance ◽  
Pressure Changes ◽  
Timber Piles

Slow, shallow ground movements in a slope near Yellowknife caused excessive tilting of timber piles that supported an engineering structure. To avoid damage to the structure, the pile foundations had to be replaced by rigid concrete piers that were designed to resist the forces of the moving soil mass. Downhill movements were rather slow and, during an initial inspection, were indicated only by soil that was pushed up against a series of piles on their uphill sides, while gaps had formed on their downhill sides. No open cracks or bulging was observed on the slope. A stability analysis indicated that the slope was not in a state of limit equilibrium. To obtain a better understanding of the creep movements in the slope and their effect on the rigid concrete piers, extensive instrumentation was carried out after the construction of the piers. This included slope indicators, piezometers, thermistors, and total-pressure cells against one of the concrete piers. In addition, a triaxial testing program was undertaken in which the effect of cyclic pore-water pressure changes on the long-term deformations of the shallow clay layer was investigated. From the data collected in the field and laboratory, it could be concluded that (i) tilting of the original timber piles was caused by downslope movements related to cyclic pore-water increases; (ii) the lateral soil movements increased almost linearly with depth from 2 m below the ground surface, with no indication of a slip surface; and (iii) the pressures exerted by the moving soil mass against the rigid concrete piers within the soil mass were equal to the passive resistance activated within the moving soil mass. Key words : soil creep, slope movements, soil pressures, pore-water pressures, freezing pressures, permafrost, cyclic loading.

scholarly journals Experimental insights into consolidation rates during one-dimensional loading with special reference to excess pore water pressure

2020 ◽  
Vol 15 (12) ◽  
pp. 3571-3591
Author(s):  
Bartłomiej Szczepan Olek
Keyword(s):  
Pore Water ◽  
Large Scale ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Small Scale ◽  
Coefficient Of Consolidation ◽  
Consolidation Process ◽  
Factors Affecting ◽  
Fine Grained ◽  
Fine Grained Soil

AbstractConsolidation rate has significant influence on the settlement of structures founded on soft fine-grained soil. This paper presents the results of a series of small-scale and large-scale Rowe cell consolidation tests with pore water pressure measurements to investigate the factors affecting the consolidation process. Permeability and creep/resistance structure factors were considered as the governing factors. Intact and reconstituted marine clay from the Polish Carpathian Foredeep basin as well as clay–sand mixtures was examined in the present study. The fundamental relationship correlating consolidation degrees based on compression and pore water pressure was assessed to indicate the nonlinear soil behaviour. It was observed that the instantaneous consolidation parameters vary as the process progresses. The instantaneous coefficient of consolidation first drastically increases or decreases with increase in the degree of consolidation and stabilises in the middle stage of the consolidation; it then decreases significantly due to viscoplastic effects occurring in the soil structure. Based on the characteristics of the relationship between coefficient of consolidation and degree of dissipation at the base, the consolidation range that complies with theoretical assumptions was established. Furthermore, the influence of coarser fraction in clay–sand mixtures in controlling the consolidation rates is discussed.

Unsaturated Seepage and Fluid-Solid Coupling Analysis of Rainfall Infiltration of Slope

2011 ◽  
Vol 255-260 ◽  
pp. 3488-3492
Author(s):  
Bao Lin Xiong ◽  
Jing Song Tang ◽  
Chun Jiao Lu
Keyword(s):  
Pore Water ◽  
Unsaturated Flow ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Rainfall Infiltration ◽  
Medium Permeability ◽  
Stability Of Slope ◽  
Transient Seepage ◽  
The Stability ◽  
Unsaturated Seepage

Rainfall is one of the main factors that influence the stability of slope. Rainfall infiltration will cause soil saturation changing and further influence pore water pressure and medium permeability coefficient. Based on porous media saturation-unsaturated flow theory, the slope transient seepage field is simulated under the conditions of rainfall infiltration. It is shown that change of pore water pressure in slope soil lag behind relative changes in rainfall conditions. As the rainfall infiltrate, unsaturated zone in top half of slope become diminution, the soil suction and shear strength reduce, so stabilization of soil slope is reduced.

scholarly journals New technique for predicting the pore water pressure and evaluating the stability of rock-fill dam during impounding

2007 ◽  
Vol 49 (1) ◽  
pp. 3-15
Author(s):  
Yasuo YANAKA ◽  
Akira TAKAHASHI ◽  
Yoshinobu HOS H INO ◽  
Tomokazu SUZUKI ◽  
Makoto NISHIGAKI ◽  
...  
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
New Technique ◽  
Rock Fill ◽  
The Stability

Limit equilibrium analysis for the design of backfilled stope barricades made of waste rock

2011 ◽  
Vol 48 (11) ◽  
pp. 1713-1728 ◽  
Author(s):  
Li Li ◽  
Michel Aubertin
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Waste Rock ◽  
Equilibrium Analysis ◽  
Mining Operations ◽  
Limit Equilibrium Analysis ◽  
Fill Material

Backfilling of underground stopes is commonly applied in mining operations. Barricades are required to hold the fill material in the stope during and after placement. As such barricades may be constructed with waste rock, there is a need to develop solutions to analyse their response. This paper presents a limit equilibrium analysis solution for defining the dimensions of waste rock barricades. The proposed solution applies to drained (without pore-water pressure) and submerged (with pore-water pressure) conditions. The solutions are presented and applied to sample cases.

Theoretical prediction of rutting in flexible pavement subgrades

1992 ◽  
Vol 29 (5) ◽  
pp. 765-778 ◽  
Author(s):  
D. V. Ramsamooj ◽  
R. Piper
Keyword(s):  
Pore Water ◽  
Critical State ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Permanent Deformation ◽  
Flexible Pavement ◽  
Load Test ◽  
Model Parameters ◽  
Silty Clay ◽  
Rate Of Development

The theoretical model for predicting the cyclic response of soils is extended to handle the generation and dissipation of pore-water pressures and to predict the rutting of the subgrade of a flexible pavement. The model utilizes multiyield surfaces and the concepts of critical state mechanics to predict the permanent deformation of the subgrade under vehicular loading. The theoretical solution also considers the effects of the drainage characteristics of the subgrade soil on the rate of development of the permanent deformation. Experimental verification of the model concepts are presented for a drained cyclic load test on Ottawa sand and for undrained cyclic loading on Newfield clay using published experimental data. An illustrative example is given for the prediction of rutting in a silty clay subgrade. The model parameters for the silty clay are obtained from triaxial and consolidation tests. These parameters are then put into a computer program that determines the rut depth, pore-water pressure, and the ratio of the vertical deformation and the rut depth as functions of the number of vehicular loads for a flexible pavement for various conditions of drainage ranging from undrained to fully drained. The role of the coefficient of consolidation of the subgrade in controlling the rate of development of the rut depth is highlighted. Key words : critical state soil mechanics, multiyield surfaces, rutting, silty clay subgrade, drainage, vehicular loading.

scholarly journals Analysis of shallow failures triggered by the 14-16 November 2002 event in the Albaredo valley, Valtellina (Northern Italy)

2005 ◽  
Vol 2 ◽  
pp. 305-308 ◽  
Author(s):  
S. Dapporto ◽  
P. Aleotti ◽  
N. Casagli ◽  
G. Polloni
Keyword(s):  
Pore Water ◽  
Slope Failure ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Coupled Analysis ◽  
Element Analysis ◽  
Seepage Analysis ◽  
The North ◽  
Pressure Distributions

Abstract. On 14-16 November 2002 the North Italy was affected by an intense rainfall event: in the Albaredo valley (Valtellina) more than 200 mm of rain fell triggering about 50 shallow landslides, mainly soil slips and soil slip-debris flows. Landslides occurred above the critical rainfall thresholds computed by Cancelli and Nova (1985) and Ceriani et al. (1994) for the Italian Central Alps: in fact the cumulative precipitation at the soil slips initiation time was 230 mm (in two days) with a peak intensity of 15 mm/h. A coupled analysis of seepage and instability mechanisms is performed in order to evaluate the potential for slope failure during the event. Changes in positive and negative pore water pressures during the event are modelled by a finite element analysis of water flow in transient conditions, using as boundary condition for the nodes along the slope surface the recorded rainfall rate. The slope stability analysis is conducted applying the limit equilibrium method, using pore water pressure distributions obtained in the different time steps by the seepage analysis as input data for the calculation of the factor of safety.

scholarly journals Influence of Layer Transition Zone on Rainfall-Induced Instability of Multilayered Slope

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 4) ◽  
Author(s):  
Zhi Dou ◽  
Yimin Liu ◽  
Xueyi Zhang ◽  
Yashan Wang ◽  
Zhou Chen ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Transition Zone ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Layer Transition ◽  
Infiltration Process ◽  
Local Factor ◽  
The Stability ◽  
Different Thickness

Abstract Although numerous studies have been paid much attention to rainfall-induced instability of multilayered slopes, the interface between layers is generally considered to be “zero thickness”, and the layer transition zone between layers is neglected. In this study, the influence of the layer transition zone on the rainfall-induced instability of multilayered slope was investigated. A model was developed to simulate the rainfall infiltration process, the distribution of pore water pressure, and the stability of multilayered slope by coupling the unsaturated seepage model and the slope stability analysis method. Based on the analysis of the multilayered slopes with the different thickness ratios of the layer transition zone, a method for determining the critical thickness of the layer transition zone was proposed. The results showed that the layer transition zone had a significant influence on the stability of multilayered slope. It was found that the presence of the layer transition zone in the multilayered slope reduced the hydraulic conductivity of the slope and increased the rate of formation of transient saturated zone, which contributed to excess pore water pressure at the toe of the slope. The analysis of the local factor of safety (LFS) showed that when the thickness ratios of the layer transition zone were between 2.5% and 5%, the corresponding hydraulic conductivity of the slope decreased by 1%-2.5% and the maximum failure area of the slope during the rainfall was 25% of the slope. Our study highlighted the importance of the layer transition zone for the rainfall-induced instability of the multilayered slope.

Sign in / Sign up

Export Citation Format

Share Document