scholarly journals Extraction Methods and Implementation Technologies of Fuel Injection Pump Cam Profile Characteristics

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Yangpeng Liu ◽  
Peng Chen ◽  
Jianjun Ding ◽  
Lin Sun ◽  
Tao Li ◽  
...  
Keyword(s):  
Fuel Injection ◽  
Polynomial Interpolation ◽  
Phase Error ◽  
Extraction Methods ◽  
High Point ◽  
Precision Measuring ◽  
Injection Pump ◽  
Fuel Injection Pump ◽  
Cam Profile ◽  
Profile Characteristics

Because the traditional camshaft measurement methods cannot be applied to the injection pump cam, in order to improve the measurement automation of injection camshaft, an accurate extraction method of the characteristic parameters of the injection cam profile is proposed in this paper. In this method, the phase error optimization is realized by the angle precise rotation matching of the actual lift data. The optimization is realized by the Lagrangian polynomial interpolation algorithm based on the moving window. The goals of precise measurement of the peach point phase of single high point cam and accurate acquisition of the back dead point phase of high point arc segment cam are realized. Compared with the precision of high-precision measuring equipment, the method can extract the lift and phase angle error of the cam accurately and stably.

Comparison of intake and exhaust throttling for diesel particulate filter active regeneration of non-road diesel engine with mechanical fuel injection pump

2020 ◽  
pp. 146808742092603
Author(s):  
Wonmo Kang ◽  
Sukang Pyo ◽  
Hongsuk Kim
Keyword(s):  
Fuel Consumption ◽  
Diesel Particulate Filter ◽  
Fuel Injection ◽  
Particulate Filter ◽  
Diesel Particulate ◽  
Air Mass ◽  
Filter Regeneration ◽  
Exhaust Temperature ◽  
Injection Pump ◽  
Fuel Injection Pump

Diesel particulate filter regeneration using intake and exhaust throttling is technically simple and economically efficient compared to other methods. The purpose of this study is to investigate not only the reasons for the increase in exhaust temperature during intake or exhaust throttling but also their feasibility as a diesel particulate filter regeneration technology. In this study, a non-road diesel engine having a mechanical fuel injection pump was used for experiments. The changes in exhaust temperatures were measured during intake and exhaust throttling for the no-load maximum revolutions per minute engine condition. The experimental results exhibited that both intake and exhaust throttling reduced the intake air mass flow rate and increased piston pumping, which then increased fuel consumption. These effects were the primary reasons for increasing the temperature of exhaust gases. In particular, intake throttling was more effective than exhaust throttling in terms of reducing the intake air mass flow rate. However, exhaust throttling caused larger pumping losses, resulting in higher fuel consumption. Furthermore, in case of exhaust throttling, engine combustion was possible even at high equivalence ratios because of the larger amounts of residual gases in the combustion chamber. In summary, exhaust throttling is more effective for regenerating a diesel particulate filter at a high temperature than intake throttling. In addition, this study verified the feasibility of diesel particulate filter regeneration using exhaust throttling through analyses of diesel particulate filter regeneration efficiency, fuel consumption, and exhaust concentration when regenerating the diesel particulate filter by increasing the exhaust temperature through exhaust throttling.

Paper 6: Torsional Vibrations in Fuel Injection Pump Drive Systems with Special Reference to Automotive Engines

1966 ◽  
Vol 181 (8) ◽  
pp. 84-90
Author(s):  
L. F. Martyn ◽  
T. M. B. Silcock
Keyword(s):  
Diesel Engine ◽  
Natural Frequency ◽  
Fuel Injection ◽  
Torsional Vibrations ◽  
Pump System ◽  
Automotive Engines ◽  
Injection Pump ◽  
Infinite Mass ◽  
Fuel Injection Pump ◽  
Drive Systems

The torsional vibrations which occur on the fuel injection pump of an automotive diesel engine were investigated. Calculations and tests showed that as well as vibrations transmitted from the crankshaft, the fuel pump could vibrate at the natural frequency of the torsional system consisting of the pump and the drive coupling against an infinite mass. This was excited by harmonic torques produced by the pump. Calculations were made to show the effect of variables on the natural frequency of the pump system including the instance when a crankshaft natural frequency coincided with a pump natural frequency. Calculations were also made of the effect of the engine harmonic torques on the pump vibrations. The results were verified by experiments.

Sign in / Sign up

Export Citation Format

Share Document