scholarly journals Rockburst Prediction on the Superimposed Effect of Excavation Accumulation Energy and Blasting Vibration Energy in Deep Roadway

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Qingwen Li ◽  
Ben Xiang
Keyword(s):  
Rock Mass ◽  
Elastic Energy ◽  
Elastic Vibration ◽  
Vibration Energy ◽  
Blasting Vibration ◽  
Gold Mine ◽  
Deep Mining ◽  
High Geostress ◽  
Superimposed Effect

In deep mining, much elastic energy is stored in rock mass due to the high geostress. Rockburst will be induced by accumulated energy during excavation. Meanwhile, because of blasting vibration energy in the host rock, there will be an obvious superimposed effect on the probability and intensity of rockburst. To explore the most reasonable and effective method for understanding rockburst problem under blasting, a deep roadway of Sanshandao gold mine was studied. On the basis of in situ geostress data, the accumulated energy of three-centered arch roadway after quasi-static excavation was derived. Then, a series of in situ blasting vibration were monitored, and the blasting vibration energy was calculated by employing the equivalent theory of elastic vibration boundary. Finally, the tendentiousness of rockburst was evaluated qualitatively with the superimposed energy. The results indicated that the disaster-driven energy was increased by 45.1% and 28.2% on different places of roadway. Also, the probability and intensity of rockburst would be raised.

scholarly journals Numerical Simulation of Blast Vibration and Crack Forming Effect of Rock-Anchored Beam Excavation in Deep Underground Caverns

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
XinPing Li ◽  
JunHong Huang ◽  
Yi Luo ◽  
Qian Dong ◽  
YouHua Li ◽  
...  
Keyword(s):  
Rock Mass ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
Vibration Velocity ◽  
Blasting Vibration ◽  
Finite Element Software ◽  
Underground Cavern ◽  
Underground Caverns ◽  
Blasting Excavation

Aiming at surrounding rock damage induced by dynamic disturbance from blasting excavation of rock-anchored beam in rock mass at moderate or far distance in underground cavern, numerical model of different linear charging density and crustal stress in underground cavern is established by adopting dynamic finite element software based on borehole layout, charging, and rock parameter of the actual situation of a certain hydropower station. Through comparison in vibration velocity, contour surface of rock mass excavation, and the crushing extent of excavated rock mass between calculation result and field monitoring, optimum linear charging density of blast hole is determined. Studies are also conducted on rock mass vibration in moderate or far distance to blasting source, the damage of surrounding rock in near-field to blasting source, and crushing degree of excavated rock mass under various in situ stress conditions. Results indicate that, within certain range of in situ stress, the blasting vibration is independent of in situ stress, while when in situ stress is increasing above certain value, the blasting vibration velocity will be increasing and the damage of surrounding rock and the crushing degree of excavated rock mass will be decreasing.

In Situ Tests on Creep Behavior of Rock Mass with Joint or Shearing Zone in Foundation of Large-Scale Hydroelectric Projects

2004 ◽  
Vol 261-263 ◽  
pp. 1097-1102 ◽  
Author(s):  
Jian Liu ◽  
Xia Ting Feng ◽  
Xiu Li Ding ◽  
Huo Ming Zhou
Keyword(s):  
Rock Mass ◽  
Creep Behavior ◽  
Large Scale ◽  
Time Dependent ◽  
Three Gorges Project ◽  
Three Gorges ◽  
The Three Gorges ◽  
The Three Gorges Project

The time-dependent behavior of rock mass, which is generally governed by joints and shearing zones, is of great significance for engineering design and prediction of long-term deformation and stability. In situ creep test is a more effective method than laboratory test in characterizing the creep behavior of rock mass with joint or shearing zone due to the complexity of field conditions. A series of in situ creep tests on granite with joint at the shiplock area of the Three-Gorges Project and basalt with shearing zone at the right abutment of the Xiluodu Project were performed in this study. Based on the test results, the stress-displacement-time responses of the joints and basalt are analyzed, and their time-dependent constitutive model and model coefficients are given, which is crucial for the design to prevent the creep deformations of rock masses from causing the failure of the operation of the shiplock gate at the Three-Gorges Project and long-term stability of the Xiluodu arc dam.

scholarly journals Study of Rock Mass Rating (RMR) and Geological Strength Index (GSI) Correlations in Granite, Siltstone, Sandstone and Quartzite Rock Masses

2021 ◽  
Vol 11 (8) ◽  
pp. 3351
Author(s):  
Gabor Somodi ◽  
Neil Bar ◽  
László Kovács ◽  
Marco Arrieta ◽  
Ákos Török ◽  
...  
Keyword(s):  
Rock Mass ◽  
Linear Equations ◽  
Geological Strength Index ◽  
Gold Mine ◽  
Strength Index ◽  
Comprehensive Understanding ◽  
Rock Types ◽  
Mass Classification ◽  
Waste Repository ◽  
And Performance

A comprehensive understanding of geological, structural geological, hydrogeological and geotechnical features of the host rock are essential for the design and performance evaluation of surface and underground excavations. The Hungarian National Radioactive Waste Repository (NRWR) at Bátaapáti is constructed in a fractured granitic formation, and Telfer Gold Mine in Australia is excavated in stratified siltstones, sandstones and quartzites. This study highlights relationships between GSI chart ratings and calculated GSI values based on RMR rock mass classification data. The paper presents linear equations for estimating GSI from measured RMR89 values. Correlations between a and b constants were analyzed for different rock types, at surface and subsurface settings.

Analysis of TBM Tunnel Behavior in Jointed Rock Mass

2011 ◽  
Vol 90-93 ◽  
pp. 2033-2036 ◽  
Author(s):  
Jin Shan Sun ◽  
Hong Jun Guo ◽  
Wen Bo Lu ◽  
Qing Hui Jiang
Keyword(s):  
Rock Mass ◽  
Numerical Models ◽  
Jointed Rock ◽  
In Situ Stress ◽  
Jointed Rock Mass ◽  
Joint Orientation ◽  
Joint Spacing ◽  
Factors Affecting ◽  
Dip Angle

The factors affecting the TBM tunnel behavior in jointed rock mass is investigated. In the numerical models the concrete segment lining of TBM tunnel is concerned, which is simulated as a tube neglecting the segment joint. And the TBM tunnel construction process is simulate considering the excavation and installing of the segment linings. Some cases are analyzed with different joint orientation, joint spacing, joint strength and tunnel depth. The results show that the shape and areas of loosing zones of the tunnel are influenced by the parameters of joint sets and in-situ stress significantly, such as dip angle, spacing, strength, and the in-situ stress statement. And the stress and deformation of the tunnel lining are influenced by the parameters of joint sets and in-situ stress, too.

scholarly journals Study on the Deformation Mechanism of Soft Rock Roadway under Blasting Disturbance in Baoguo Iron Mine

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Hong-di Jing ◽  
Yuan-hui Li ◽  
Kun-meng Li
Keyword(s):  
Rock Mass ◽  
Deformation Mechanism ◽  
Soft Rock ◽  
Deformation Monitoring ◽  
Underground Mines ◽  
Blasting Vibration ◽  
Iron Mine ◽  
The Stability ◽  
Soft Rock Roadway ◽  
Rock Roadway

In order to study the deformation mechanism of soft rock roadway in underground mines, it is necessary not only to study the influence of the dynamic disturbance caused by the cyclic mining blasting vibration on the stability of the soft rock roadway but also to study the degradation of the roadway surrounding rock itself and other factors. The paper presented a synthetic research system to investigate the factors that influence roadway rock structure deterioration in Baoguo Iron Mine. Firstly, the stability of rock mass was analyzed from the perspective of the physical and structural characteristics of the rock mass. Afterwards, according to monitoring data of mining blasting vibration, a suitable safety blasting prediction model for Baoguo Iron Mine was determined. And then, combining the results of mining blasting vibration monitoring and deformation monitoring, the effect of cyclic mining blasting on the stability of the soft rock roadway was obtained. By systematically studying the intrinsic factors of rock quality degradation and external environmental disturbances and their interactions, this paper comprehensively explores the deformation mechanism of soft rock roadway and provides the support for fundamentally solving the large deformation problems of soft rock roadway in underground mines.

scholarly journals Treatment of neutral gold mine drainage by sequential in-situ hydrotalcite precipitation, and microbial sulfate and cyanide removal

2021 ◽  
pp. 149613
Author(s):  
Ka Yu Cheng ◽  
Caroline Rubina Acuña ◽  
Anna H. Kaksonen ◽  
Graeme Esslemont ◽  
Grant B. Douglas
Keyword(s):  
Mine Drainage ◽  
Gold Mine ◽  
Cyanide Removal

Back Analysis Methods in Geotechnical Engineering

2014 ◽  
Vol 1020 ◽  
pp. 423-428 ◽  
Author(s):  
Eva Hrubesova ◽  
Marek Mohyla
Keyword(s):  
Rock Mass ◽  
Geotechnical Engineering ◽  
Back Analysis ◽  
Rheological Parameters ◽  
Analysis Method ◽  
Direct Optimization ◽  
Initial Stress State ◽  
Analytical Functions ◽  
Is Evaluation

The paper deals with the back analysis method in geotechnical engineering, that goal is evaluation the more objective and reliable parameters of the rock mass on the basis of in-situ measurements. Stress, deformational, strength and rheological parameters of the rock mass are usually determined by some inaccuracies and errors arising from the complexity and variability of the rock mass. This higher or lower degree of imprecision is reflected in the reliability of the mathematical modelling results. The paper presents the utilization of direct optimization back analysis method, based on the theory of analytical functions of complex variable and Kolosov-Muschelischvili relations, to the evaluation of initial stress state inside the rock massif.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

Sign in / Sign up

Export Citation Format

Share Document