scholarly journals Nondestructive Detection of Authenticity of Thai Jasmine Rice Using Multispectral Imaging

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Wei Liu ◽  
Xue Xu ◽  
Changhong Liu ◽  
Lei Zheng
Keyword(s):  
Least Squares ◽  
Multispectral Imaging ◽  
Imaging System ◽  
Principal Component ◽  
Quantitative Prediction ◽  
Coefficient Of Determination ◽  
Support Vector ◽  
Chemometric Methods ◽  
Nondestructive Detection ◽  
Jasmine Rice

The detection of authenticity is essential to the development and management of Thai jasmine rice industry. In this study, the multispectral imaging system (405–970 nm) was used for the detection of adulteration in Thai jasmine rice combined with chemometric methods including principal component analysis (PCA), partial least squares (PLS), least squares-support vector machines (LS-SVM), and backpropagation neural network (BPNN). Three varieties of rice that were similar to Thai jasmine rice in appearance were selected to perform the classification and quantitative prediction experiments by multispectral images. For the classification experiment, four varieties of rice samples could be easily classified with accuracy achieved to 92% by the BPNN model. For the quantitative prediction of adulteration proportion experiments, the results showed that, among the different chemometric methods, LS-SVM achieved the best prediction performance comparing the results of coefficient of determination, root-mean-square error (RMSEP), bias, and residual predictive deviation (RPD). It can be concluded that multispectral imaging technology with chemometric methods can be applied in the rapid and nondestructive detection of authenticity of Thai jasmine rice.

Non-destructive discrimination of conventional and glyphosate-resistant soybean seeds and their hybrid descendants using multispectral imaging and chemometric methods

2014 ◽  
Vol 154 (1) ◽  
pp. 1-12 ◽  
Author(s):  
C. LIU ◽  
W. LIU ◽  
X. LU ◽  
W. CHEN ◽  
F. CHEN ◽  
...  
Keyword(s):  
Least Squares ◽  
Multispectral Imaging ◽  
High Efficiency ◽  
Imaging System ◽  
Principal Component ◽  
Support Vector ◽  
Soybean Seeds ◽  
Chemometric Methods ◽  
Transgenic Soybean ◽  
Non Destructive

SUMMARYSoybean is an important oil- and protein-producing crop and over the last few decades soybean genetic transformation has made rapid strides. The probability of occurrence of transgene flow should be assessed, although the discrimination of conventional and transgenic soybean seeds and their hybrid descendants is difficult in fields. The feasibility of non-destructive discrimination of conventional and glyphosate-resistant soybean seeds and their hybrid descendants was examined by a multispectral imaging system combined with chemometric methods. Principal component analysis (PCA), partial least squares discriminant analysis (PLSDA), least squares-support vector machines (LS-SVM) and back propagation neural network (BPNN) methods were applied to classify soybean seeds. The current results demonstrated that clear differences among conventional and glyphosate-resistant soybean seeds and their hybrid descendants could be easily visualized and an excellent classification (98% with BPNN model) could be achieved. It was concluded that multispectral imaging together with chemometric methods would be a promising technique to identify transgenic soybean seeds with high efficiency.

scholarly journals Prediction of various freshness indicators in fish fillets by one multispectral imaging system

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Sara Khoshnoudi-Nia ◽  
Marzieh Moosavi-Nasab
Keyword(s):  
Least Squares ◽  
Multispectral Imaging ◽  
Imaging System ◽  
Quantitative Model ◽  
Plate Count ◽  
Support Vector ◽  
Least Squares Regression ◽  
Fish Fillets ◽  
Sensory Score ◽  
Non Linear

Abstract In current study, a simple multispectral imaging (430–1010 nm) system along with linear and non-linear regressions were used to assess the various fish spoilage indicators during 12 days storage at 4 ± 2 °C. The indicators included Total-Volatile Basic Nitrogen (TVB-N) and Psychrotrophic Plate Count (PPC) and sensory score in fish fillets. immediately, after hyperspectral imaging, the reference values (TVB-N, PPC and sensory score) of samples were obtained by traditional method. To simplify the calibration models, nine optimal wavelengths were selected by genetic algorithm. The prediction performance of various chemometric models including partial least-squares regression (PLSR), multiple-linear regression (MLR), least-squares support vector machine (LS-SVM) and back-propagation artificial neural network (BP-ANN) were compared. All models showed acceptable performance for simultaneous predicting of PPC, TVB-N and sensory score (R2P ≥ 0.853 and RPD ≥ 2.603). Non-linear models were considered better quantitative model to predict all of three freshness indicators in fish fillets. Among the three spoilage indices, the best predictive power was obtained for PPC value and the weakest one was acquired for TVB-N content prediction. The best model for prediction TVB-N (R2p = 0.862; RMSEP = 3.542 and RPD = 2.678) and sensory score (R2p = 0.912; RMSEP = 1.802 and RPD = 3.33) belonged to GA-LS-SVM and for prediction of PPC value was BP-ANN (R2p = 0.921; RMSEP = 0.504 and RPD = 3.64). Therefore, developing multispectral imaging system based on LS-SVM model seems to be suitable for simultaneous prediction of all three indicators (R2P > 0.862 and RPD > 2.678). Further studies needed to improve the accuracy and applicability of HSI system for predicting freshness of rainbow-trout fish.

scholarly journals Predicting Ink Transfer Rate of 3D Additive Printing Using EGBO Optimized Least Squares Support Vector Machine Model

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Shengpu Li ◽  
Yize Sun
Keyword(s):  
Support Vector Machine ◽  
Prediction Model ◽  
Least Squares ◽  
Transfer Rate ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Experimental Sample ◽  
Machine Model ◽  
Ink Transfer

Ink transfer rate (ITR) is a reference index to measure the quality of 3D additive printing. In this study, an ink transfer rate prediction model is proposed by applying the least squares support vector machine (LSSVM). In addition, enhanced garden balsam optimization (EGBO) is used for selection and optimization of hyperparameters that are embedded in the LSSVM model. 102 sets of experimental sample data have been collected from the production line to train and test the hybrid prediction model. Experimental results show that the coefficient of determination (R2) for the introduced model is equal to 0.8476, the root-mean-square error (RMSE) is 6.6 × 10 (−3), and the mean absolute percentage error (MAPE) is 1.6502 × 10 (−3) for the ink transfer rate of 3D additive printing.

scholarly journals Optimized Method for Mapping Inorganic Pigments by Means of Multispectral Imaging Combined with Hyperspectral Spectroscopy for the Study of Vincenzo Pasqualoni’s Wall Painting at the Basilica of S. Nicola in Carcere in Rome

Minerals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 839
Author(s):  
Lucilla Pronti ◽  
Giuseppe Capobianco ◽  
Margherita Vendittelli ◽  
Anna Candida Felici ◽  
Silvia Serranti ◽  
...  
Keyword(s):  
Multispectral Imaging ◽  
Imaging System ◽  
Principal Component ◽  
Reflectance Spectroscopy ◽  
Wall Painting ◽  
High Spectral Resolution ◽  
Spectral Difference ◽  
Color Palette ◽  
A Minor ◽  
Nir Reflectance Spectroscopy

Multispectral imaging is a preliminary screening technique for the study of paintings. Although it permits the identification of several mineral pigments by their spectral behavior, it is considered less performing concerning hyperspectral imaging, since a limited number of wavelengths are selected. In this work, we propose an optimized method to map the distribution of the mineral pigments used by Vincenzo Pasqualoni for his wall painting placed at the Basilica of S. Nicola in Carcere in Rome, combining UV/VIS/NIR reflectance spectroscopy and multispectral imaging. The first method (UV/VIS/NIR reflectance spectroscopy) allowed us to characterize pigment layers with a high spectral resolution; the second method (UV/VIS/NIR multispectral imaging) permitted the evaluation of the pigment distribution by utilizing a restricted number of wavelengths. Combining the results obtained from both devices was possible to obtain a distribution map of a pictorial layer with a high accuracy level of pigment recognition. The method involved the joint use of point-by-point hyperspectral spectroscopy and Principal Component Analysis (PCA) to identify the pigments in the color palette and evaluate the possibility to discriminate all the pigments recognized, using a minor number of wavelengths acquired through the multispectral imaging system. Finally, the distribution and the spectral difference of the different pigments recognized in the multispectral images, (in this case: red ochre, yellow ochre, orpiment, cobalt blue-based pigments, ultramarine and chrome green) were shown through PCA false-color images.

scholarly journals Intelligent Prediction of Transmission Line Project Cost Based on Least Squares Support Vector Machine Optimized by Particle Swarm Optimization

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Tao Yi ◽  
Hao Zheng ◽  
Yu Tian ◽  
Jin-peng Liu
Keyword(s):  
Support Vector Machine ◽  
Particle Swarm Optimization ◽  
Prediction Model ◽  
Transmission Line ◽  
Least Squares ◽  
Principal Component ◽  
Support Vector ◽  
Swarm Optimization ◽  
Empirical Parameter ◽  
Parameter Prediction

In order to meet the demand of power supply, the construction of transmission line projects is constantly advancing, and the level of cost control is constantly improving, which puts forward higher requirements for the accuracy of cost prediction. This paper proposes an intelligent cost prediction model based on least squares support vector machine (LSSVM) optimized by particle swarm optimization (PSO). Originally extracting natural, technological, and economic indexes from the perspective of cost composition, principal component analysis (PCA) is used to reduce the dimension of indexes. And PSO is innovatively introduced to optimize the parameters of LSSVM model to obtain the optimal parameters. The obtained principal component data are imported into empirical parameter LSSVM prediction model and the optimized parameter PSO-LSSVM prediction model, respectively, for modeling and prediction, and then comparing the prediction results to analyze the effect of model optimization. The results show that the absolute deviation of the optimized parameter prediction model is less than 9%. And the prediction accuracy of the optimized parameter prediction model is better than that of the empirical parameter model, which can provide a reliable basis for investment decision-making of transmission line projects.

Comparison of Multivariate Calibrations for the Determination of Soluble Solids Content of Tea Beverage Using UV-VIS-NIR Spectroscopy

2012 ◽  
Vol 236-237 ◽  
pp. 83-88 ◽  
Author(s):  
Wei Qiang Luo ◽  
Hai Qing Yang ◽  
Wei Cheng Dai
Keyword(s):  
Least Squares ◽  
Multivariate Calibration ◽  
Fiber Type ◽  
Nir Spectroscopy ◽  
Soluble Solids ◽  
Coefficient Of Determination ◽  
Support Vector ◽  
Soluble Solids Content ◽  
Solids Content

Ultra-violet, visible and near infrared (UV-VIS-NIR) spectroscopy combined with chemometrics was investigated for fast determination of soluble solids content (SSC) of tea beverage. In this study, a total of 120 tea samples with SSC range of 4.0-9.5 ºBrix were tested. Samples were randomly divided for calibration (n=90) and independent validation (n=30). Spectra were collected by a mobile fiber-type UV-VIS-NIR spectrophotometer in transmission mode with recorded wavelength range of 203.64-1128.05 nm. Various calibration approaches, i.e., principal components analysis (PCA), partial least squares (PLS) regression, least squares support vector machine (LSSVM) and back propagation artificial neural network (BPANN), were investigated. The combinations of PCA-BPANN, PCA-LSSVM, PLS-BPANN and PLS-LSSVM were also investigated to build calibration models. Validation results indicated that all these investigated models achieved high prediction accuracy. Especially, PLS-LSSVM achieved best performance with mean coefficient of determination (R2) of 0.99, root-mean-square error of prediction (RMSEP) of 0.12 and residual prediction deviation (RPD) of 15.16. This experiment suggests that it is feasible to measure SSC of tea beverage using UV-VIS-NIR spectroscopy coupled with appropriate multivariate calibration, which may allow using the proposed method for off-line and on-line quality supervision in the production of soft drink.

scholarly journals A Comprehensive Method for Assessing Meat Freshness Using Fusing Electronic Nose, Computer Vision, and Artificial Tactile Technologies

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Xiaohui Weng ◽  
Xiangyu Luan ◽  
Cheng Kong ◽  
Zhiyong Chang ◽  
Yinwu Li ◽  
...  
Keyword(s):  
Computer Vision ◽  
Electronic Nose ◽  
Prediction Models ◽  
Meat Products ◽  
Principal Component ◽  
Coefficient Of Determination ◽  
Support Vector ◽  
Pattern Recognition Methods ◽  
Fusion Data ◽  
Objective Detection

The traditional methods cannot be used to meet the requirements of rapid and objective detection of meat freshness. Electronic nose (E-Nose), computer vision (CV), and artificial tactile (AT) sensory technologies can be used to mimic humans’ compressive sensory functions of smell, look, and touch when making judgement of meat quality (freshness). Though individual E-Nose, CV, and AT sensory technologies have been used to detect the meat freshness, the detection results vary and are not reliable. In this paper, a new method has been proposed through the integration of E-Nose, CV, and AT sensory technologies for capturing comprehensive meat freshness parameters and the data fusion method for analysing the complicated data with different dimensions and units of six odour parameters of E-Nose, 9 colour parameters of CV, and 4 rubbery parameters of AT for effective meat freshness detection. The pork and chicken meats have been selected for a validation test. The total volatile base nitrogen (TVB-N) assays are used to define meat freshness as the standard criteria for validating the effectiveness of the proposed method. The principal component analysis (PCA) and support vector machine (SVM) are used as unsupervised and supervised pattern recognition methods to analyse the source data and the fusion data of the three instruments, respectively. The experimental and data analysis results show that compared to a single technology, the fusion of E-Nose, CV, and AT technologies significantly improves the detection performance of various freshness meat products. In addition, partial least squares (PLS) is used to construct TVB-N value prediction models, in which the fusion data is input. The root mean square error predictions (RMSEP) for the sample pork and chicken meats are 1.21 and 0.98, respectively, in which the coefficient of determination (R2) is 0.91 and 0.94. This means that the proposed method can be used to effectively detect meat freshness and the storage time (days).

scholarly journals Cultivar Discrimination of Single Alfalfa (Medicago sativa L.) Seed via Multispectral Imaging Combined with Multivariate Analysis

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6575
Author(s):  
Lingjie Yang ◽  
Zuxin Zhang ◽  
Xiaowen Hu
Keyword(s):  
Multivariate Analysis ◽  
Multispectral Imaging ◽  
Principal Component ◽  
Nondestructive Method ◽  
Morphological Features ◽  
Support Vector ◽  
Linear Discrimination ◽  
Vector Machines ◽  
Alfalfa Seed ◽  
Medicago Sativa L

Rapid and accurate discrimination of alfalfa cultivars is crucial for producers, consumers, and market regulators. However, the conventional routine of alfalfa cultivars discrimination is time-consuming and labor-intensive. In this study, the potential of a new method was evaluated that used multispectral imaging combined with object-wise multivariate image analysis to distinguish alfalfa cultivars with a single seed. Three multivariate analysis methods including principal component analysis (PCA), linear discrimination analysis (LDA), and support vector machines (SVM) were applied to distinguish seeds of 12 alfalfa cultivars based on their morphological and spectral traits. The results showed that the combination of morphological features and spectral data could provide an exceedingly concise process to classify alfalfa seeds of different cultivars with multivariate analysis, while it failed to make the classification with only seed morphological features. Seed classification accuracy of the testing sets was 91.53% for LDA, and 93.47% for SVM. Thus, multispectral imaging combined with multivariate analysis could provide a simple, robust and nondestructive method to distinguish alfalfa seed cultivars.

scholarly journals Detection of Cyanuric Acid and Melamine in Infant Formula Powders by Mid-FTIR Spectroscopy and Multivariate Analysis

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Edwin García-Miguel ◽  
Ofelia Gabriela Meza-Márquez ◽  
Guillermo Osorio-Revilla ◽  
Darío Iker Téllez-Medina ◽  
Cristian Jiménez-Martínez ◽  
...  
Keyword(s):  
Multivariate Analysis ◽  
Ftir Spectroscopy ◽  
Least Squares ◽  
Infant Formula ◽  
Cyanuric Acid ◽  
Principal Component Regression ◽  
Predictive Ability ◽  
Principal Component ◽  
Infant Formulas ◽  
Chemometric Methods

Chemometric methods using mid-FTIR spectroscopy were developed in order to reduce the time of study of melamine and cyanuric acid in infant formulas. Chemometric models were constructed using the algorithms Partial Least Squares (PLS1, PLS2) and Principal Component Regression (PCR) in order to correlate the IR signal with the levels of melamine or cyanuric acid in the infant formula samples. Results showed that the best correlations were obtained using PLS1 (R2: 0.9998, SEC: 0.0793, and SEP: 0.5545 for melamine and R2: 0.9997, SEC: 0.1074, and SEP: 0.5021 for cyanuric acid). Also, the SIMCA model was studied to distinguish between adulterated formulas and nonadulterated samples, giving optimum discrimination and good interclass distances between samples. Results showed that chemometric models demonstrated a good predictive ability of melamine and cyanuric acid concentrations in infant formulas, showing that this is a rapid and accurate technique to be used in the identification and quantification of these adulterants in infant formulas.

Sign in / Sign up

Export Citation Format

Share Document