scholarly journals Investigation on the Influence of Design Parameters of Streamline Flow Tubes on Pump Performance

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Kan Bian ◽  
Zhi Huang ◽  
Jietao Dai ◽  
Fan Zhang ◽  
Xiaosheng Chen ◽  
...  
Keyword(s):  
Flow Rate ◽  
Structure Design ◽  
Simulation Software ◽  
Smooth Transition ◽  
Design Parameters ◽  
Streamline Flow ◽  
Piezoelectric Pump ◽  
Conservation Of Energy ◽  
Pump Performance ◽  
Valveless Piezoelectric Pump

Studies have shown that the valveless piezoelectric pump with streamline flow tubes (VPPSFTs) can increase the flow rate while reducing the vortex, which has a broad application prospect and conforms to the huge potential demand in the fields of medical treatment, sanitation, and health care. The flow runner of the VPPSFT was designed as two segments with a smooth transition between the hyperbola segment and the arc segment. However, the effect of the radius of the arc segment on pump performance is not clear. Therefore, three groups of VPPSFT with arc segments of different curvature radii were designed in this study, and the influence of curvature radius of arc segment on the pump performance was explored. On the basis of the theoretical analysis of fluid continuity and conservation of energy, the structure of VPPSFT was designed, the experimental test was carried out, and the finite element simulation software was used for numerical analysis. The results show that the output performance increases with the increase in the radius of the arc segment, and the maximum flow rate was 116.78 mL/min. The amplitude and the flow rate are almost the same trend as the frequency. This study improves the performance of the valveless piezoelectric pump and provides reference for the structure design of VPPSFT.

scholarly journals Research on a Piezoelectric Pump with Flexible Valves

2021 ◽  
Vol 11 (7) ◽  
pp. 2909
Author(s):  
Weiqing Huang ◽  
Liyi Lai ◽  
Zhenlin Chen ◽  
Xiaosheng Chen ◽  
Zhi Huang ◽  
...  
Keyword(s):  
Flow Rate ◽  
Fluid Transport ◽  
Smooth Transition ◽  
Driving Voltage ◽  
Piezoelectric Pump ◽  
Venous Valve ◽  
Output Pressure ◽  
Small Flow ◽  
Working Principle ◽  
Opening And Closing

Imitating the structure of the venous valve and its characteristics of passive opening and closing with changes in heart pressure, a piezoelectric pump with flexible valves (PPFV) was designed. Firstly, the structure and the working principle of the PPFV were introduced. Then, the flexible valve, the main functional component of the pump, was analyzed theoretically. Finally, an experimental prototype was manufactured and its performance was tested. The research proves that the PPFV can achieve a smooth transition between valved and valveless by only changing the driving signal of the piezoelectric (PZT) vibrator. The results demonstrate that when the driving voltage is 100 V and the frequency is 25 Hz, the experimental flow rate of the PPFV is about 119.61 mL/min, and the output pressure is about 6.16 kPa. This kind of pump can realize the reciprocal conversion of a large flow rate, high output pressure, and a small flow rate, low output pressure under the electronic control signal. Therefore, it can be utilized for fluid transport and pressure transmission at both the macro-level and the micro-level, which belongs to the macro–micro combined component.

The characters exploration of a piezoelectric pump with fishtail-shaped bluffbody

2021 ◽  
pp. 1045389X2110386
Author(s):  
Yi Hou ◽  
Lipeng He ◽  
Zheng Zhang ◽  
Baojun Yu ◽  
Hong Jiang ◽  
...  
Keyword(s):  
Flow Rate ◽  
Preliminary Investigation ◽  
Maximum Flow ◽  
Theoretical Explanation ◽  
Maximum Flow Rate ◽  
Bluff Bodies ◽  
Conical Flow ◽  
Piezoelectric Pump ◽  
Valveless Piezoelectric Pump ◽  
Shape And Size

This paper focuses on a new structure in the valveless piezoelectric pump, which has a combination structure of the conical flow channel and two fishtail-shaped bluffbodies in the chamber of the pump. The fishtail-shaped bluffbody is inspired by the shape of the swimming fish to diminish the backflow and optimize the performance of the pump. The performance is studied by changing the shape and size of the inlet and outlet, the bluff bodies’ height and the space between two bluff bodies. The results show that the 3 mm × 3 mm square inlet, 3 mm diameter round outlet, 3 mm height of bluffbodies, 6.8 mm pitch of bluffbodies has a best performance in all 10 prototypes, which implements a maximum flow rate of 87.5 ml/min at 170 V 40 Hz with a noise of 42.6 dB. This study makes a preliminary investigation and theoretical explanation for the subsequent optimization of this structure, improved the performance of the valveless piezoelectric pump, broaden the thinking of the design for the bluffbody for better performance of the valveless piezoelectric pump.

Valveless Piezoelectric Pump with Reverse Diversion Channel

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1712
Author(s):  
Yongming Yao ◽  
Zhicong Zhou ◽  
Huiying Liu ◽  
Tianyu Li ◽  
Xiaobin Gao
Keyword(s):  
Reverse Flow ◽  
Structural Parameters ◽  
Maximum Flow ◽  
Simulation Software ◽  
Return Flow ◽  
Piezoelectric Pump ◽  
Output Performance ◽  
Diversion Channel ◽  
Tesla Valve ◽  
Valveless Piezoelectric Pump

In order to reduce backflow and improve output performance, a valveless piezoelectric pump with a reverse diversion channel was produced. The channel was designed based on the structure of the Tesla valve, which has no moving parts and can produce a high-pressure drop during reverse flow. Therefore, this special flowing channel can reduce the backflow of a valveless piezoelectric pump, which has the characteristic of one-way conduction. This work first revealed the relationship between the main structural parameters of the Tesla valve and the kinetic energy difference of liquid. Then, by using simulation software, the structure was verified to have the characteristics of effective suppression of the backflow of valveless piezoelectric pumps. Through setting multiple simulations, some important parameters that include the optimal height between the straight channels (H), the optimal angle (α) between the straight channel and the inclined channel, as well as the optimal radius (R) of the channel were confirmed. Finally, a series of prototypes were fabricated to test the output performance of this valveless piezoelectric pump. Comparing the experimental results, the optimal parameters of the Tesla valve were determined. The results suggest that when the parameters of the Tesla valve were H = 8 mm, α = 30°, and R = 3.4 mm, the output performance of this piezoelectric pump became best, which had a maximum flow rate of 79.26 mL/min with a piezoelectric actuator diameter of 35 mm, an applied voltage of 350 Vp-p, and a frequency of 28 Hz. The effect of this structure in reducing the return flow can be applied to fields such as agricultural irrigation.

scholarly journals Equivalent Circuit Modeling for a Valveless Piezoelectric Pump

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2881 ◽  
Author(s):  
Jianhui Zhang ◽  
Yuan Wang ◽  
Jun Huang
Keyword(s):  
Equivalent Circuit ◽  
Flow Rate ◽  
Equivalent Circuit Model ◽  
Circuit Model ◽  
Experimental Results ◽  
Driving Voltage ◽  
Piezoelectric Pump ◽  
Pump System ◽  
Field Problem ◽  
Valveless Piezoelectric Pump

Various kinds of the models had been proposed to explain the relationship between the performance and the structural parameters of valveless piezoelectric pumps, so as to evaluate the functional performance such devices. Among the models, the equivalent circuit model, which converts the multi-field problem of a valveless piezoelectric pump system into a simple circuit problem, is the most simple and clear one. Therefore, the proposed structure and working principle of the valveless piezoelectric pump with multistage Y-shape treelike bifurcate tubes are analyzed; then, the equivalent circuit model of the valveless piezoelectric pump is established based on the working principles of this pump and liquid-electric analogy theory. Finally, an experimental study of the pump is carried out, with a comparative analysis of the experimental results and the simulation results of the generated equivalent circuit. The experimental results show that with a driving voltage of 100 V and frequency of 6 Hz, the maximum flow rate of the valveless piezoelectric pump is 1.16 mL/min. Meanwhile, the output current of equivalent circuit also reaches its peak at the frequency of 6 Hz, therefore, indicating a good predictive ability of this model in calculating the maximum output flow rate and best working frequency of valveless piezoelectric pumps.

scholarly journals Advances in Valveless Piezoelectric Pumps

2021 ◽  
Vol 11 (15) ◽  
pp. 7061
Author(s):  
Qiufeng Yan ◽  
Yongkang Yin ◽  
Wanting Sun ◽  
Jun Fu
Keyword(s):  
Structure Design ◽  
Future Research ◽  
Liquid Cooling ◽  
Piezoelectric Pump ◽  
Pump Design ◽  
Output Pressure ◽  
Output Performance ◽  
Development Tendency ◽  
Important Branch ◽  
Valveless Piezoelectric Pump

Piezoelectric pump design is regarded as a hot research topic in the microfluidic field, and has been applied in liquid cooling, precision machinery and other relevant domains. The valveless piezoelectric pump becomes an important branch of the piezoelectric pump, because it successfully avoids the problem of “pump-lagging of valve” during the valve piezoelectric pump processing. This paper summarizes the development of valveless piezoelectric pumps, and introduces some different configurations of valveless piezoelectric pumps. The structure and material of all kinds of valveless piezoelectric pumps are elaborated in detail, and also the output performance of the pump is evaluated and analyzed with the variations in flow rate and output pressure as reference. By comparing the flow of different types of valveless piezoelectric pumps, the application of valveless piezoelectric pumps is also illustrated. The development tendency of the valveless piezoelectric pump is prospected from the perspective of structure design and machining methods, which is expected to provide novel ideas and guidance for future research.

scholarly journals Numerical simulation and experimental study on valveless piezoelectric pump with triangular obstacles

2021 ◽  
Vol 2083 (2) ◽  
pp. 022028
Author(s):  
Yeming Sun ◽  
Yu Wang ◽  
Yiwei Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Rate ◽  
Flow Resistance ◽  
Reverse Flow ◽  
Maximum Output ◽  
Driving Voltage ◽  
Driving Frequency ◽  
Piezoelectric Pump ◽  
Valveless Pump ◽  
Valveless Piezoelectric Pump

Abstract A valve less piezoelectric pump with triangular obstacles is designed and manufactured, which uses piezoelectric vibrator as power source. The working principle and theoretical flow rate of the valveless piezoelectric pump are analyzed, and its flow rate expression is derived. The flow resistance characteristics of triangular obstacles are simulated by numerical simulation. Based on the mass fraction distribution of liquid water, the forward and reverse flow resistance of triangular obstacles and the influence of triangular obstacles on pumping capacity are analyzed. Finally, two groups of test prototypes of the valveless pump are made by using the engraving machine, and the flow measurement test is carried out. The experimental results show that the valveless piezoelectric pump with triangular obstacles can realize the valveless pumping function, and the pumping flow per unit time increases with the increase of triangular obstacles in the channel, and decreases with the increase of the distance between triangular obstacles and the channel. When the driving voltage is 140V and the driving frequency is 10Hz, the maximum output flow of the piezoelectric pump is 16.26ml/min.

Design of a wheeled wall climbing robot based on the performance of bio-inspired dry adhesive material

Robotica ◽  
2021 ◽  
pp. 1-14
Author(s):  
Hongkai Li ◽  
Xianfei Sun ◽  
Zishuo Chen ◽  
Lei Zhang ◽  
Hongchao Wang ◽  
...  
Keyword(s):  
Flat Surface ◽  
Thrust Force ◽  
Adhesion Force ◽  
Structure Design ◽  
Design Parameters ◽  
Climbing Robot ◽  
Adhesive Material ◽  
Ducted Fan ◽  
The Stability ◽  
Belt System

Abstract Inspired by gecko’s adhesive feet, a wheeled wall climbing robot is designed in this paper with the synchronized gears and belt system acting as the wheels by considering both motion efficiency and adhesive capability. Adhesion of wheels is obtained by the bio-inspired adhesive material wrapping on the outer surface of wheels. A ducted fan mounted on the back of the robot supplies thrust force for the adhesive material to generate normal and shear adhesion force whilemoving on vertical surfaces. Experimental verification of robot climbing on vertical flat surface was carried out. The stability and the effect of structure design parameters were analyzed.

Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

2021 ◽  
pp. 095440622199586
Author(s):  
Qianhao Xiao ◽  
Jun Wang ◽  
Boyan Jiang ◽  
Weigang Yang ◽  
Xiaopei Yang
Keyword(s):  
Flow Rate ◽  
Optimization Design ◽  
Volume Flow Rate ◽  
Kriging Model ◽  
Volume Flow ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

Sign in / Sign up

Export Citation Format

Share Document