scholarly journals Numerical Analyses of Fracturing Behavior and Strength of Specimens with Two Parallel Infilled Flaws under Uniaxial Compression

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Huilin Le ◽  
Jihong Wei ◽  
Shaorui Sun ◽  
Wuchao Wang ◽  
Haotian Fan
Keyword(s):  
Mechanical Property ◽  
Uniaxial Compression ◽  
Inclination Angle ◽  
Numerical Study ◽  
Tensile Force ◽  
Rock Material ◽  
Rock Joints ◽  
Shear Cracks ◽  
Tensile Cracks ◽  
Crack Behavior

Grouting is a common method used to fill rock joints to improve the stability and integrity of rock mass in geotechnical engineering, and the filling has been observed to have an effect on crack behavior and mechanical property. To investigate this topic, a numerical study of crack behavior and mechanical property of rock samples with two parallel open flaws or infilled flaws under uniaxial compression was conducted in this research. The smooth joint model was proved to be suitable to simulate the interface between rock material and grout material. The occurrence of shear cracks at the interface between rock material and grout material as well as the occurrence of tensile cracks in the grouting material has been successfully simulated in this research. Numerical results indicate that grouting can reduce the tensile force near the flaws, suppress the generation of tensile cracks, and improve the initiation stress of the sample. The tensile force in the specimens with infilled flaws is smaller than that with open flaws, which lead to the improvement of the peak strength of the sample. Moreover, crack development and mechanical properties of samples are affected by bridge inclination angle and flaw inclination angle.

scholarly journals A Numerical Study on the Crack Development Behavior of Rock-Like Material Containing Two Intersecting Flaws

Mathematics ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 1223 ◽  
Author(s):  
Bing Dai ◽  
Ying Chen ◽  
Guoyan Zhao ◽  
Weizhang Liang ◽  
Hao Wu
Keyword(s):  
Crack Initiation ◽  
Crack Propagation ◽  
Numerical Simulations ◽  
Inclination Angle ◽  
Numerical Study ◽  
Peak Stress ◽  
Crack Coalescence ◽  
Intersection Angle ◽  
Crack Behavior ◽  
Inclination Angles

It is quite often that rocks contain intersecting cracks. Therefore, crack behavior cannot be completely studied by only considering several isolated, single flaws. To investigate the crack behavior of rock or rock-like material containing intersecting flaws under uniaxial loading, numerical simulations were carried out using parallel bonded-particle models containing two intersecting flaws with different inclination angles (varying β) and different intersection angles (varying αα). The crack propagation processes are analyzed and two typical patterns of linkage are observed between two intersecting flaws: (1) One-tip-linkage that contains three subtypes: Coalescence position near the tip; coalescence position at the flaw, but far away from the tip; coalescence position outside the flaw at a certain distance from the tip; and (2) two-tip-linkage with two subtypes: Straight linkage and arc linkage. The geometries of flaws influence the coalescence type. Moreover, the effects of intersection angle α and inclination angle β on the peak stress, the stress of crack initiation, and the stress of crack coalescence are also investigated in detail.

scholarly journals Study on the Interaction of Collinear Cracks and Wing Cracks and Cracking Behavior of Rock under Uniaxial Compression

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Chaolin Wang ◽  
Yu Zhao ◽  
Yanlin Zhao ◽  
Wen Wan
Keyword(s):  
Uniaxial Compression ◽  
Inclination Angle ◽  
Shear Crack ◽  
Crack Coalescence ◽  
Crack Interaction ◽  
Shear Cracks ◽  
Collinear Cracks ◽  
Wing Crack ◽  
Cracking Behavior ◽  
Initiation And Propagation

This paper investigates the crack interaction, initiation, and propagation rules of rock-like materials containing two collinear cracks. Based on the Kachanov method, the formulations for stress intensity factors (SIFs) of two collinear cracks and two winged cracks are derived, respectively. The influences of bridge ligament and crack length on the crack interaction are analyzed theoretically. The results show that the propagation of a long crack is independent of crack interaction when d≥a2 and the same rule applies for a short crack when d≥a1. With the growth of wing cracks, the SIF of wings first remarkably decreases and then it tends toward a steady value. Subsequently, the propagation of collinear cracks and cracking processes under uniaxial compression are analyzed experimentally and numerically. Both the experimental results and simulation results demonstrate that shear cracks tend to initiate and propagate at higher inclination angle. The crack coalescence is affected by the inclination angle of bridge ligament. For increasing the inclination angle, the crack coalescence varies from wing crack failure to shear crack coalescence. As bridge ligament increases, the crack coalescence varies from shear crack coalescence to shear-wing crack coalescence and then to wing crack failure.

scholarly journals Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2108
Author(s):  
Guanlin Liu ◽  
Youliang Chen ◽  
Xi Du ◽  
Peng Xiao ◽  
Shaoming Liao ◽  
...  
Keyword(s):  
Uniaxial Compression ◽  
Damage Evolution ◽  
Rock Sample ◽  
Rock Fracture ◽  
Damage Threshold ◽  
Crack Development ◽  
Energy Evolution ◽  
Shear Cracks ◽  
Compression Tests ◽  
Microcrack Propagation

The cracking of rock mass under compression is the main factor causing structural failure. Therefore, it is very crucial to establish a rock damage evolution model to investigate the crack development process and reveal the failure and instability mechanism of rock under load. In this study, four different strength types of rock samples from hard to weak were selected, and the Voronoi method was used to perform and analyze uniaxial compression tests and the fracture process. The change characteristics of the number, angle, and length of cracks in the process of rock failure and instability were obtained. Three laws of crack development, damage evolution, and energy evolution were analyzed. The main conclusions are as follows. (1) The rock’s initial damage is mainly caused by tensile cracks, and the rapid growth of shear cracks after exceeding the damage threshold indicates that the rock is about to be a failure. The development of micro-cracks is mainly concentrated on the diagonal of the rock sample and gradually expands to the middle along the two ends of the diagonal. (2) The identification point of failure precursor information in Acoustic Emission (AE) can effectively provide a safety warning for the development of rock fracture. (3) The uniaxial compression damage constitutive equation of the rock sample with the crack length as the parameter is established, which can better reflect the damage evolution characteristics of the rock sample. (4) Tensile crack requires low energy consumption and energy dispersion is not concentrated. The damage is not apparent. Shear cracks are concentrated and consume a large amount of energy, resulting in strong damage and making it easy to form macro-cracks.

scholarly journals Acoustic Emission Characteristics and Joint Nonlinear Mechanical Response of Rock Masses under Uniaxial Compression

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 200
Author(s):  
Zhongliang Feng ◽  
Xin Chen ◽  
Yu Fu ◽  
Shaoshuai Qing ◽  
Tongguan Xie
Keyword(s):  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Inclination Angle ◽  
Failure Modes ◽  
Strain Curve ◽  
Particle Flow Code ◽  
Rock Masses ◽  
Physical Experiments ◽  
Inclination Angles ◽  
Joint Inclination

The joint arrangement in rock masses is the critical factor controlling the stability of rock structures in underground geotechnical engineering. In this study, the influence of the joint inclination angle on the mechanical behavior of jointed rock masses under uniaxial compression was investigated. Physical model laboratory experiments were conducted on jointed specimens with a single pre-existing flaw inclined at 0°, 30°, 45°, 60°, and 90° and on intact specimens. The acoustic emission (AE) signals were monitored during the loading process, which revealed that there is a correlation between the AE characteristics and the failure modes of the jointed specimens with different inclination angles. In addition, particle flow code (PFC) modeling was carried out to reproduce the phenomena observed in the physical experiments. According to the numerical results, the AE phenomenon was basically the same as that observed in the physical experiments. The response of the pre-existing joint mainly involved three stages: (I) the closing of the joint; (II) the strength mobilization of the joint; and (III) the reopening of the joint. Moreover, the response of the pre-existing joint was closely related to the joint’s inclination. As the joint inclination angle increased, the strength mobilization stage of the joint gradually shifted from the pre-peak stage of the stress–strain curve to the post-peak stage. In addition, the instantaneous drop in the average joint system aperture (aave) in the specimens with medium and high inclination angles corresponded to a rapid increase in the form of the pulse of the AE activity during the strength mobilization stage.

A numerical study on free-fall of a torus with initial inclination angle at low Reynolds numbers

2021 ◽  
Vol 107 ◽  
pp. 103389
Author(s):  
Tao Huang ◽  
Haibo Zhao ◽  
Sai Peng ◽  
Jiayu Li ◽  
Yang Yao ◽  
...  
Keyword(s):  
Inclination Angle ◽  
Numerical Study ◽  
Free Fall ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Low Reynolds

Numerical Study on Influence of Joint Characters on Rock Mechanical Parameters

2011 ◽  
Vol 201-203 ◽  
pp. 2909-2912
Author(s):  
Yan Feng Feng ◽  
Tian Hong Yang ◽  
Hua Wei ◽  
Hua Guo Gao ◽  
Jiu Hong Wei
Keyword(s):  
Rock Mass ◽  
Compression Strength ◽  
Numerical Study ◽  
Process Analysis ◽  
Failure Process ◽  
Deformation Modulus ◽  
Rock Joints ◽  
Structured Surfaces ◽  
Trace Length ◽  
The Impact

Rock mass is the syntheses composed of kinds of structure and structured surfaces. The joint characters is influencing and controlling the rock mass strength, deformation characteristics and rock mass engineering instability failure in a great degree. Through using the RFPA2D software, which is a kind of material failure process analysis numerical methods based on finite element stress analysis and statistical damage theory, the uniaxial compression tests on numerical model are carried, the impact of the trace length of rock joints and the fault throws on rock mechanics parameters are studied. The results showed that with the gradual increase of trace length,compression strength decreased gradually and its rate of variation getting smaller and smaller, the deformation modulus decreased but the rate of variation larger and larger; with the fault throws increasing, the compression strength first increases and then decreases, when the fault throw is equal to the trace length, the deformation modulus is the largest. When the joint trace length is less than the fault throw, the rate of the deformation modulus is greater than that of trace length, but the deformation modulus was not of regular change.

Experimental study and numerical simulation of uniaxial compression on artificial rock samples with Z-shaped fractures

2021 ◽  
Author(s):  
Tao Zhou ◽  
Haijun Chen ◽  
Liangxiao Xiong ◽  
Zhongyuan Xu ◽  
Jie Yang ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Crack Length ◽  
Uniaxial Compression ◽  
Inclination Angle ◽  
Failure Surface ◽  
Peak Strength ◽  
Particle Flow Code ◽  
Compression Tests ◽  
Failure Characteristics ◽  
Change Trend

Abstract To study the influence of the inclination and length of Z-shaped fissures on the mechanical properties and failure characteristics of the rock mass, this study conducts a series of uniaxial compression tests on rock-like materials with prefabricated Z-shaped fractures. In addition, two-dimensional Particle Flow Code software is used to perform uniaxial compression numerical simulations. The results show that when the specified inclination angle γ (γ = 0°, 30° or 45°) of the parallel cracks on both sides remains unchanged, the peak strength and elastic modulus of the sample show an M-shaped change trend with an increase in the inclination angle β of the middle connection crack. When γ = 60° or 90°, however, the peak strength and elastic modulus of the sample show a trend of decreasing, increasing, and then decreasing as β increases. In addition, the peak strength and elastic modulus of the sample decrease with an increase in the crack length. The influence of crack length on the elastic modulus is less than that of compressive strength. Further, the main failure mode of specimens with Z-shaped cracks is determined to be tension–shear mixed failure manifested by crack propagation from the tip of the prefabricated crack to the upper and lower boundaries of the sample. As a result, a through failure surface is formed with the prefabricated crack, which destroys the sample.

Sign in / Sign up

Export Citation Format

Share Document