scholarly journals Thermal and Mechanical Properties of Vinyl Ester Hybrid Composites with Carbon Black and Glass Reinforcement

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Geetanjali S. Guggari ◽  
S. Shivakumar ◽  
G. A. Manjunath ◽  
R. Nikhil ◽  
Alagar Karthick ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Flexural Strength ◽  
Carbon Black ◽  
Vinyl Ester ◽  
Flexural Modulus ◽  
Thermal And Mechanical Properties ◽  
Degradation Temperature

The objective of the work is to investigate both thermal and mechanical properties of vinyl ester/glass composites incorporated with different percentages of carbon black reinforcements through experimental approaches. Analysis of glass transition temperature, thermogravimetric analysis (TGA), degradation temperature, hardness, flexural strength, etc. is performed using differential scanning calorimeter, X-ray diffraction, tensile machine, and flexural machine, respectively. The scanning electron microscope was used for surface fracture studies. The degradation temperature reduces initially with the percentage of carbon black and then increases. Glass transition temperature increases with the percentage of carbon black while above 500°C temperature, the weight percentage of composite drops. The results also reveal that 4% of carbon with vinyl ester improved the tensile strength by 30%, hardness by 35%, flexural strength by 45%, flexural modulus by 66%, and interlaminate shear strength by 44% when compared with the other percentage of carbon black.

Fabrication of Laminated Nanocomposites by Vacuum-Assisted Deposition of Clay Onto Glass/Epoxy Prepregs

2006 ◽  
Author(s):  
Levent Aktas ◽  
M. Cengiz Altan
Keyword(s):  
Mechanical Properties ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Flexural Strength ◽  
Microstructural Characterization ◽  
Flexural Stiffness ◽  
Matrix Composites ◽  
Deposition Chamber ◽  
Nanoclay Content

In this study we are presenting a novel method for introducing nanoclay in epoxy matrix composites. The method involves vacuum-assisted deposition of fine clay particles directly onto the surface of commercially available prepregs. A deposition chamber is developed that is capable of breaking down nanoclay particles by subjecting them to shear and depositing them uniformly onto prepregs at room temperature. By using the deposition chamber, a thin layer of nanoclay is deposited on 101.6mm×101.6mm woven glass/epoxy prepregs. Twelve of these prepregs are stacked and cured by an autoclave at a temperature of 121°C under a constant pressure of 0.2MPa (30psi) for 1 hour. After the curing is complete, the laminates are cut into 10.8mm×31.7mm samples for three-point bending tests, glass transition temperature measurements and microstructural characterization. The improvements in mechanical properties such as flexural strength, flexural stiffness, and glass transition temperature by the addition of nanoclay are presented. Nanocomposite morphology is studied by light microscopy and scanning electron microscopy. Marginal improvements in mechanical properties are observed with only 0.6% nanoclay content. The flexural stiffness improved by 4% while maintaining the flexural strength constant at around 400Wa. Glass transition temperature is measured as 128°C for samples with and without nanoclay. However, significant differences in microstructure are observed. Although both samples contain micro-voids, these voids are observed to be more extensive in samples involving nanoclay.

Curing, Thermal and Mechanical Properties of Liquid Crystalline p-SBPEPB/BPAER/DDE System

2011 ◽  
Vol 239-242 ◽  
pp. 3253-3256 ◽  
Author(s):  
Li Huo ◽  
Jun Gang Gao ◽  
Yong Gang Du
Keyword(s):  
Mechanical Properties ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Impact Strength ◽  
Bisphenol A ◽  
Liquid Crystalline ◽  
Curing Agent ◽  
Thermal And Mechanical Properties ◽  
Component System

The curing, thermal and mechanical properties of bi-component system for bisphenol A epoxy resin (BPAER) modified by liquid crystalline Sulfonyl bis(4,1-phenylene)bis[4-(2,3-epoxypro pyloxy)benzoate] (p-SBPEPB), with 4,4'-diaminodiphenyl ether (DDE) as a curing agent, were investigated. The effect of the different liquid crystalline contents and the heating rate on curing reaction was discussed. The results show that the curing peak temperature decreases, curing rate increases, the glass transition temperature (Tg)and impact strength all increase with adding of liquid crystalline p-SBPEPB when the content is not over 8wt%.

scholarly journals Biocomposites based on poly(lactic acid) and kenaf fibers: Effect of micro-fibrillated cellulose

2013 ◽  
Vol 32 (1) ◽  
pp. 331 ◽  
Author(s):  
Gordana Bogoeva-Gaceva ◽  
Dimko Dimeski ◽  
Vineta Srebrenkoska
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Flexural Strength ◽  
Microfibrillated Cellulose ◽  
Poly Lactic Acid ◽  
Kenaf Fiber ◽  
Kenaf Fibers

In this work, the influence of microfibrillated cellulose (MFC) on the basic mechanical properties of PLA/kenaf fiber biocomposites has been studied. The addition of 5–15 % microfibrillated cellulose to a biocomposite premix has resulted in an increased glass transition temperature of the final product, produced by compression molding of previously melt-mixed composite components. The presence of MFC has influenced the interface-sensitive properties of the PLA/kenaf composite: at an optimal loading of 10 %, the interfacial energy release rate was increased by about 20 %. Moreover, flexural strength and modulus of the composites were also improved (from 34.8 MPa to 57.1 MPa and from 4.9 GPa to 5.8 GPa, respectively).   

scholarly journals Studies on the Modification of Commercial Bisphenol-A-Based Epoxy Resin Using Different Multifunctional Epoxy Systems

2021 ◽  
Vol 2 (2) ◽  
pp. 419-430
Author(s):  
Ankur Bajpai ◽  
James R. Davidson ◽  
Colin Robert
Keyword(s):  
Mechanical Properties ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Bisphenol A ◽  
Epoxy Resin ◽  
Tensile Fracture ◽  
Chemical Structures ◽  
Amino Phenol ◽  
Epoxy Systems

The tensile fracture mechanics and thermo-mechanical properties of mixtures composed of two kinds of epoxy resins of different chemical structures and functional groups were studied. The base resin was a bi-functional epoxy resin based on diglycidyl ether of bisphenol-A (DGEBA) and the other resins were (a) distilled triglycidylether of meta-amino phenol (b) 1, 6–naphthalene di epoxy and (c) fluorene di epoxy. This research shows that a small number of multifunctional epoxy systems, both di- and tri-functional, can significantly increase tensile strength (14%) over neat DGEBA while having no negative impact on other mechanical properties including glass transition temperature and elastic modulus. In fact, when compared to unmodified DGEBA, the tri-functional epoxy shows a slight increase (5%) in glass transition temperature at 10 wt.% concentration. The enhanced crosslinking of DGEBA (90 wt.%)/distilled triglycidylether of meta-amino phenol (10 wt.%) blends may be the possible reason for the improved glass transition. Finally, the influence of strain rate, temperature and moisture were investigated for both the neat DGEBA and the best performing modified system. The neat DGEBA was steadily outperformed by its modified counterpart in every condition.

scholarly journals Synthesis, Properties, and Biodegradability of Thermoplastic Elastomers Made from 2-Methyl-1,3-propanediol, Glutaric Acid and Lactide

Life ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 43
Author(s):  
Lamya Zahir ◽  
Takumitsu Kida ◽  
Ryo Tanaka ◽  
Yuushou Nakayama ◽  
Takeshi Shiono ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Glutaric Acid ◽  
Triblock Copolymers ◽  
Tensile Tests ◽  
Thermoplastic Elastomers ◽  
Proteinase K ◽  
Synthesis Properties

An innovative type of biodegradable thermoplastic elastomers with improved mechanical properties from very common and potentially renewable sources, poly(L-lactide)-b-poly(2-methyl-1,3-propylene glutarate)-b-poly(L-lactide) (PLA-b-PMPG-b-PLA)s, has been developed for the first time. PLA-b-PMPG-b-PLAs were synthesized by polycondensation of 2-methyl-1,3-propanediol and glutaric acid and successive ring-opening polymerization of L-lactide, where PMPG is an amorphous central block with low glass transition temperature and PLA is hard semicrystalline terminal blocks. The copolymers showed glass transition temperature at lower than −40 °C and melting temperature at 130–152 °C. The tensile tests of these copolymers were also performed to evaluate their mechanical properties. The degradation of the copolymers and PMPG by enzymes proteinase K and lipase PS were investigated. Microbial biodegradation in seawater was also performed at 27 °C. The triblock copolymers and PMPG homopolymer were found to show 9–15% biodegradation within 28 days, representing their relatively high biodegradability in seawater. The macromolecular structure of the triblock copolymers of PLA and PMPG can be controlled to tune their mechanical and biodegradation properties, demonstrating their potential use in various applications.

scholarly journals Hydrophobically Modified Isosorbide Dimethacrylates as a Bisphenol-A (BPA)-Free Dental Filling Material

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2139
Author(s):  
Bilal Marie ◽  
Raymond Clark ◽  
Tim Gillece ◽  
Seher Ozkan ◽  
Michael Jaffe ◽  
...  
Keyword(s):  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Flexural Strength ◽  
Bisphenol A ◽  
Water Sorption ◽  
Triethylene Glycol ◽  
Filling Material ◽  
Hydrophobically Modified ◽  
Free Replacement

A series of bio-based hydrophobically modified isosorbide dimethacrylates, with para-, meta-, and ortho- benzoate aromatic spacers (ISBGBMA), are synthesized, characterized, and evaluated as potential dental restorative resins. The new monomers, isosorbide 2,5-bis(4-glyceryloxybenzoate) dimethacrylate (ISB4GBMA), isosorbide 2,5-bis(3-glyceryloxybenzoate) dimethacrylate (ISB3GBMA), and isosorbide 2,5-bis(2-glyceryloxybenzoate) dimethacrylate (ISB2GBMA), are mixed with triethylene glycol dimethacrylate (TEGDMA) and photopolymerized. The resulting polymers are evaluated for the degree of monomeric conversion, polymerization shrinkage, water sorption, glass transition temperature, and flexural strength. Isosorbide glycerolate dimethacrylate (ISDGMA) is synthesized, and Bisphenol A glycerolate dimethacrylate (BisGMA) is prepared, and both are evaluated as a reference. Poly(ISBGBMA/TEGDMA) series shows lower water sorption (39–44 µg/mm3) over Poly(ISDGMA/TEGDMA) (73 µg/mm3) but higher than Poly(BisGMA/TEGDMA) (26 µg/mm3). Flexural strength is higher for Poly(ISBGBMA/TEGDMA) series (37–45 MPa) over Poly(ISDGMA/TEGDMA) (10 MPa) and less than Poly(BisGMA/TEGDMA) (53 MPa) after immersion in phosphate-buffered saline (DPBS) for 24 h. Poly(ISB2GBMA/TEGDMA) has the highest glass transition temperature at 85 °C, and its monomeric mixture has the lowest viscosity at 0.62 Pa·s, among the (ISBGBMA/TEGDMA) polymers and monomer mixtures. Collectively, this data suggests that the ortho ISBGBMA monomer is a potential bio-based, BPA-free replacement for BisGMA, and could be the focus for future study.

Sign in / Sign up

Export Citation Format

Share Document