scholarly journals Analysis of Facial Skeletal Morphology: Nasal Bone, Maxilla, and Mandible

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Han-Sheng Chen ◽  
Szu-Yu Hsiao ◽  
Kun-Tsung Lee
Keyword(s):  
Correlation Coefficient ◽  
Body Length ◽  
Nasal Bone ◽  
Class Ii ◽  
Class I ◽  
Class Iii ◽  
Bone Length ◽  
Significant Difference ◽  
Mandibular Body ◽  
Nasal Bone Length

The growth and development of facial bones are closely related to each other. The present study investigated the differences in the nasomaxillary and mandibular morphology among different skeletal patterns. Cephalograms of 240 participants were divided into 3 groups based on the skeletal pattern (Class I, Class II, and Class III). The dimensions of nasomaxilla (nasal bone length, nasal ridge length, nasal depth, palatal length, and maxillary height) and mandible (condylar length, ramus length, body length, symphysis length, and entire mandibular length) were measured. One-way analysis of variance and Pearson’s correlation test were used for statistical analysis. No significant differences were observed among the skeletal patterns in terms of nasal bone length, palatal length, maxillary height, or condylar length. Class II had a significantly shorter ramus, mandibular body, and entire mandibular length compared with those of Class I and Class III. Nasal ridge length exhibited a significant moderate correlated with nasal bone length (correlation coefficient: 0.433) and maxillary height (correlation coefficient: 0.535). The entire mandibular length exhibited a significant moderate correlated with ramus length (correlation coefficient: 0.485) and body length (correlation coefficient: 0.536). In conclusion, nasal and maxillary dimensions exhibited no significant difference among the 3 skeletal patterns. Mandibular body and entire mandibular lengths were significantly positively correlations with Class III skeletal patterns.

scholarly journals Mandibular symphysis morphology and dimensions in different anteroposterior jaw relationships

2013 ◽  
Vol 84 (2) ◽  
pp. 304-309 ◽  
Author(s):  
Susan N. Al-Khateeb ◽  
Emad F. Al Maaitah ◽  
Elham S. Abu Alhaija ◽  
Serene A. Badran
Keyword(s):  
Correlation Coefficient ◽  
Alveolar Bone ◽  
Pearson Correlation ◽  
Class Ii ◽  
Class I ◽  
Pearson Correlation Coefficient ◽  
Strongly Correlated ◽  
Class Iii ◽  
Mandibular Symphysis ◽  
Lateral Cephalograms

ABSTRACT Objective: To assess the morphology and dimensions of mandibular symphysis (MS) in different anteroposterior jaw relationships and to investigate whether craniofacial parameters have any correlation with its shape and/or dimensions. Materials and Methods: Lateral cephalograms of subjects with Class I, Class II, and Class III skeletal relationships were traced. Several craniofacial and MS parameters were measured. MS parameters were compared between the three groups using analysis of variance and were correlated with the craniofacial parameters using the Pearson correlation coefficient. Results: Larger angle of concavity of the chin, more inclination of the alveolar bone toward the mandibular plane, and larger MS dimensions and area (P < .001) were found with a Class III skeletal relationship compared to Class I and Class II relationships. The Pearson correlation coefficient between Id-Me and AFH was r  =  0.83 and between Id-Me and LAFH it was r  =  0.81. Conclusions: The dimensions and configuration of MS in the Class III relationship were different than those in Class I and Class II relationships; the alveolar part of MS compensated for the skeletal relationship in the Class III pattern. MS dimensions were strongly correlated to anterior facial dimensions.

scholarly journals The duration of pubertal growth peak among three skeletal classes

2016 ◽  
Vol 21 (5) ◽  
pp. 67-74 ◽  
Author(s):  
Waqar Jeelani ◽  
◽  
Mubassar Fida ◽  
Attiya Shaikh ◽  
◽  
...  
Keyword(s):  
Class Ii ◽  
Growth Potential ◽  
Class I ◽  
Maturation Stage ◽  
Class Iii ◽  
Pubertal Growth ◽  
Lateral Cephalograms ◽  
Wide Range ◽  
Significant Difference ◽  
The Mean

ABSTRACT Introduction: Pubertal growth peak is closely associated with a rapid increase in mandibular length and offers a wide range of therapeutic modifiability. Objective: The aim of the present study was to determine and compare the mean ages of onset and duration of pubertal growth peak among three skeletal classes. Methods: A retrospective cross-sectional study was conducted using lateral cephalograms of 230 subjects with growth potential (110 males, 120 females). Subjects were categorized into three classes (Class I = 81, Class II = 82, Class III = 67), according to the sagittal relationship established between the maxilla and the mandible. The cervical vertebral maturation stage was recorded by means of Baccetti's method. The mean ages at CS3 and CS4 and the CS3-CS4 age interval were compared between boys and girls and among three skeletal classes. Results: Pubertal growth peak occurred on average four months earlier in girls than boys (p = 0.050). The average duration of pubertal growth peak was 11 months in Class I, seven months in Class II and 17 months in Class III subjects. Interclass differences were highly significant (Cohen's d > 0.08). However, no significant difference was found in the timing of pubertal growth peak onset among three skeletal classes (p = 0.126 in boys, p = 0.262 in girls). Conclusions: Girls enter pubertal growth peak on average four months earlier than boys. Moreover, the duration of pubertal growth peak is on average four months shorter in Class II and six months longer in Class III subjects as compared to Class I subjects.

scholarly journals Differences in the Buccal Bone Marrow Distance of ≤0.8 mm in the Mandible of Patients Undergoing Sagittal Split Ramus Osteotomy among the Different Skeletal Patterns: A Retrospective Study

2021 ◽  
Vol 10 (23) ◽  
pp. 5644
Author(s):  
Yu-Chuan Tseng ◽  
Shih-Wei Liang ◽  
Szu-Ting Chou ◽  
Shih-Chieh Chen ◽  
Chin-Yun Pan ◽  
...  
Keyword(s):  
Bone Marrow ◽  
Class Ii ◽  
B Value ◽  
Class I ◽  
Occurrence Rate ◽  
Class Iii ◽  
Sagittal Split Ramus Osteotomy ◽  
Lower Lip ◽  
B Values ◽  
Significant Difference

This study investigated the relationship between the thickness of the ramus and skeletal patterns using cone-beam computed tomography (CBCT) for sagittal split ramus osteotomy. Ninety participants were categorized into three skeletal patterns (Class I, Class II, and Class III). The first vertical slice (slice 0) was observed in the intact mandibular canal, and then moved forward to 40 mm (slice 21) with a 2 mm interval. The thickness of buccal bone marrow (B value) was measured. A B value of ≤0.8 mm was considered to be the major risk factor causing the occurrence of postoperative lower lip paresthesia. There were 461 sides with a B value of ≤0.8 mm. There was a significant difference in the skeletal patterns [Class III (198 sides: 15.7%) > Class I (159 sides: 12.6%) > Class II (104 sides: 8.3%)]. Class II participants had significantly larger B values (2.14 to 3.76 mm) and a lower occurrence rate (≤0.8 mm) than those of Class III participants (1.5 to 3 mm) in front of the mandibular foramen (from 6 mm to 20 mm). Class III participants had significantly shorter buccal bone marrow distance and a higher occurrence rate of B values (≤0.8 mm) than Class II.

scholarly journals Skull bone thickness versus malocclusion

2015 ◽  
Vol 5 ◽  
pp. 255-261
Author(s):  
D. K. Mahamad Iqbal ◽  
Vivek B. Amin ◽  
Rohan Mascarenhas ◽  
Akther Husain
Keyword(s):  
Class Ii ◽  
Parietal Bone ◽  
Frontal Bone ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Bone Thickness ◽  
Significant Difference ◽  
Skull Thickness

Objective The objectives of this study were to determine the thickness of skull bones, namely frontal, parietal, and occipital bones in Class I, Class II, and Class III patients. Materials and Methods Three hundred subjects who reported to the Department of Orthodontics requiring orthodontic treatment within the age group 17-35 were selected for the study. They were subdivided into three groups of 100 each according to the skeletal and dental relation. Profile radiographs were taken and the tracings were then scanned, and uploaded to the MATLAB 7.6.0 (R 2008a) software. The total surface areas of the individual bones were estimated by the software, which represented the thickness of each bone. Result Frontal bone was the thickest in Class III malocclusion group and the thinnest in Class II malocclusion group. But the parietal and occipital bone thickness were not significant. During gender differentiation in Class I, malocclusion group frontal bone thickness was more in males than females, In Class II, malocclusion parietal bone thickness was more in males than females. No statistically significant difference exists between genders, in Class III malocclusion group. During inter-comparison, the frontal bone thickness was significant when compared with Class I and Class II malocclusion groups and Class II and Class III malocclusion groups. Conclusion The differences in skull thickness in various malocclusions can be used as an adjunct in diagnosis and treatment planning for orthodontic patients. It was found that the new method (MATLAB 7.6.0 [R 2008a] software) of measuring skull thickness was easier, faster, precise, and accurate.

scholarly journals Evaluating Distance between Vibrating Line and Fovea Palatinae in Class I, Class II and Class III Soft Palate Types

2021 ◽  
pp. 78-86
Author(s):  
Bharat Kumar ◽  
Muhammad Abbas ◽  
Asma Naz ◽  
Naresh Kumar ◽  
Shahid Ali ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Oral Health ◽  
Soft Palate ◽  
Class Ii ◽  
Health Sciences ◽  
Class I ◽  
Age Group ◽  
Class Iii ◽  
Significant Difference ◽  
The Mean

Objective: The objective of this study was to evaluate the mean distance between the vibrating line and fovea palatinae in Class I, Class II and Class III Soft Palate types. Methodology: This study was conducted at Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences Karachi among 197patients. Duration of study was six months. All patients were examined for vibrating line clinically, assessed using phonation method. Subsequently, distance between vibrating line and fovea paltatinae was measured with uncalibrated compass in various contours of soft palate. Results: Out of 197 patient, the vibrating line was seen in130 (64%) anterior to fovea palatinae, whereas, 67 (34%) vibrating line was at the fovea palatinae. The mean distance of those anterior located vibrating line from fovea palatine was calculated as 2.13 (±0.82) mm in Class, 2.07 (±0.69) mm in Class II and 1.80 (±0.82) mm in Class III soft palate contours. Statistical analysis showed no significant between gender, while statistically significant difference among age group and mean distance of anterior located vibrating line from fovea palatinae were found. Conclusions: The mean distance of vibrating line which is predominately found anterior to the fovea palatinae was 2.07 (±0.77) mm.

scholarly journals RELATIONSHIP BETWEEN OCCLUSAL PLANE ORIENTATION AND SAGITTAL MALOCCLUSIONS: STUDY OF AN ORTHODONTIC POPULATION

2021 ◽  
pp. 1-6
Author(s):  
INES DALLEL ◽  
SANA KANOUN ◽  
MARIEM NAHDI ◽  
MONCEF OMMEZINE ◽  
SAMIR TOBJI ◽  
...  
Keyword(s):  
Orthodontic Treatment ◽  
Class Ii ◽  
Significant Rise ◽  
Class I ◽  
Occlusal Plane ◽  
Class Iii ◽  
Angle Class ◽  
Mandibular Plane ◽  
Significant Difference ◽  
Skeletal Pattern

Objective: The aim of this study was to evaluate the association of the skeletal pattern and angle class with the occlusal plane (OP). This study also examined the effect of orthodontic treatment on this plane. Methods: Lateral cephalometric radiographs of a sample of 135 patients were collected. The angles between the Frankfort horizontal, palatal plane (PP), mandibular plane (MP), and the OP were analyzed and compared between several groups and subsequently before and after treatment. Results: The statistical comparison between 3 skeletal frame groups demonstrates that the cant of the OP showed a major difference. This difference was greater in class III subjects. Examination revealed that the OP was not meaningfully affected within the Angle classification. Statistically, a significant correlation was found between OP steepness and the vertical skeletal pattern. A significant rise of OP/sella-nasion (SN) for class I (p=0.019) and II (p=0.015) after orthodontic treatment. In addition, patients treated with elastics showed a significant decrease of OP/MP (mandibular plane) in Angle class III and considerable increase of OP/SN and OP/PP in Angle class II. Observations of the group treated with bimaxillary extractions showed that OP/SN (sella nasion line) and OP/PP differ in a meaningful way. Conclusion: This study confirms the association between the skeletal pattern and the OP inclination in adults. Concerning the Angle classification, there was no significant difference between the groups. Orthodontic therapy had an influence on the inclination of this plane for the different malocclusions. Premolars extraction in class I cases significantly modified the OP. For class II and III malocclusions, the OP inclination was mainly altered by the use of intermaxillary traction elastics.

Cross-Sectional Study of the Length of the Nasal Bone in Cleft Lip and Palate Subjects

2005 ◽  
Vol 42 (4) ◽  
pp. 417-422 ◽  
Author(s):  
Bo Werner Nielsen ◽  
Kirsten Mølsted ◽  
Lene Theil Skovgaard ◽  
Inger KjæR
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Nasal Bone ◽  
Cross Sectional Study ◽  
Cross Sectional ◽  
Male Adult ◽  
Female Ratio ◽  
Bone Length ◽  
Significant Difference ◽  
Nasal Bone Length

Objective The purpose of this study was to analyze the human nasal bone length in newborns and male adults with cleft lip (CL), cleft palate (CP), and unilateral cleft lip and palate (UCLP) and to compare the results to previous findings in prenatal material. Design This study was a radiographic profile cephalometric cross-sectional analysis. Subjects and Methods Profile radiographs from 60 newborns with a male-to-female ratio of 1:1 in each group (20 CL, 20 CP, and 20 UCLP) and 60 male adults (20 CL, 20 CP, and 20 UCLP) were randomly selected among radiographs, taken for optimizing the treatment planning. The nasal bone lengths (n-na) were measured with a digital caliper on the profile radiographs. To compare the nasal bone lengths in the different cleft groups, Student's t tests at a significant level at 5% were performed. Results Nasal bone length was significantly shorter in male adult patients with CL compared with patients with CP. Furthermore, the nasal bone length was significantly shorter in newborns with CL (2 months) compared to newborns with UCLP (2 months). A borderline significance was seen in the comparison of patients with CL and UCLP in male adults. There was no significant difference in the nasal bone length between the patients with CP and UCLP, in either the newborns or the male adults. Conclusions Nasal bone length was significantly shorter in subjects with CL compared with subjects in whom the palate was clefted. The results show that the clefted lip in CL is associated with a subjacent skeletal deviation in the upper midface.

scholarly journals Evaluation of horizontal condylar angle in malocclusions with mandibular lateral displacement using cone-beam computed tomography

2021 ◽  
Author(s):  
Roberto L. Velásquez ◽  
Jorge C. Coro ◽  
José M. Bustillo ◽  
Sadao Sato
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Lateral Displacement ◽  
Class Ii ◽  
Contralateral Side ◽  
Class I ◽  
Cone Beam ◽  
Class Iii ◽  
Skeletal Class ◽  
Significant Difference

ABSTRACT Objectives To evaluate the horizontal condylar angle (HCA) in mandibular lateral displacement (MLD). Materials and Method s: HCA in MLD malocclusions were examined using cone-beam computed tomography data in subjects with MLD and control subjects. Results HCA in joints of control patients and contralateral side joints of MLD patients were not significantly different. The mean HCA on the shifted side was larger than on the contralateral side (P < .001) in the different HCA groups. HCA was significantly larger on the shifted side than on the contralateral side in skeletal Class I, Class II, and Class III groups (P < .001). Conclusions (1) There was no statistically significant difference between HCA in control patients and on the contralateral side in MLD patients. (2) HCA was significantly larger on the shifted side than on the contralateral side. (3) HCA on the shifted side and the contralateral side in MLD Class I, Class II, and Class III are significantly different.

scholarly journals Evaluation of Salivary Leptin Levels and Its Correlation with Class I, Class II, and Class III Facial Skeletal Pattern: A Prefatory Study

2021 ◽  
Author(s):  
Danusha Siva Dharma ◽  
Noraini Abu Bakar ◽  
Basma Ezzat Mustafa
Keyword(s):  
Orthodontic Treatment ◽  
Statistical Difference ◽  
Class Ii ◽  
Class I ◽  
Enzyme Linked Immunosorbent Assay ◽  
Cephalometric Analysis ◽  
Class Iii ◽  
Significant Difference ◽  
Skeletal Pattern ◽  
Unstimulated Saliva

Abstract Materials and Methods A sample of 62 patients were selected prior to the orthodontic treatment from a population that attended the International Islamic University Malaysia Specialist Orthodontic Clinic. Based on the lateral cephalometric analysis, the subjects were grouped into Class I, Class II, and Class III facial skeletal patterns, according to Eastman and Wits appraisal. Subsequently, unstimulated saliva samples were taken and purified to undergo leptin enzyme-linked immunosorbent assay analysis to determine the levels of leptin hormone. Statistical analysis using the Kruskal–Wallis test was used to analyze the data obtained. Results The results showed that there was a significant difference between the levels of leptin hormone between Class I and Class II skeletal patterns and between Class I and Class III facial skeletal patterns. No statistical difference was noted between the levels of leptin of Class II and Class III facial skeletal patterns. Conclusion Salivary leptin hormone levels are higher in patients with Class II and Class III facial skeletal patterns compared with Class I.

Sign in / Sign up

Export Citation Format

Share Document