scholarly journals A Multipath Processing Technology Based on Multiparameter-Combined Observation in GNSS

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
T. Y. Zhou ◽  
B. W. Lian
Keyword(s):  
Satellite Orbit ◽  
Multipath Fading ◽  
Satellite System ◽  
Measured Data ◽  
Correction Model ◽  
Reflection Model ◽  
Phase Cycle ◽  
Beidou System ◽  
Multipath Signal ◽  
Global Navigation Satellite

In the Global Navigation Satellite System (GNSS), the multipath error affected by many aspects is the main error source that affects satellite navigation, and it is difficult to establish a much more accurate model to analyze it. Based on the ground multipath reflection model, it firstly deeply studies the influence of GNSS satellite orbit parameters on multipath fading frequency and establishes a multipath signal model related to satellite orbit parameters. Secondly, the influence of carrier phase cycle slip, receiver clock adjustment, and GNSS satellite orbit on multiparameter- (MP-) combined observations is analyzed in detail based on the measured data. Finally, aiming at the common phenomenon of code-carrier divergence in the Beidou system, the elevation-based pseudorange correction model and a sidereal filtering are built to correct the MP errors; experiments with measured data show that there is a fluctuation range reduction of 35.7% after sidereal filtering when the receiver reaches a steady state.

scholarly journals Estimation of fractional cycle bias for GPS/BDS-2/Galileo based on international GNSS monitoring and assessment system observations using the uncombined PPP model

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Jin Wang ◽  
Qin Zhang ◽  
Guanwen Huang
Keyword(s):  
Estimation Method ◽  
Satellite Orbit ◽  
Satellite System ◽  
Assessment System ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Fractional Cycle Bias ◽  
The Stability ◽  
High Consistency ◽  
Global Navigation Satellite

AbstractThe Fractional Cycle Bias (FCB) product is crucial for the Ambiguity Resolution (AR) in Precise Point Positioning (PPP). Different from the traditional method using the ionospheric-free ambiguity which is formed by the Wide Lane (WL) and Narrow Lane (NL) combinations, the uncombined PPP model is flexible and effective to generate the FCB products. This study presents the FCB estimation method based on the multi-Global Navigation Satellite System (GNSS) precise satellite orbit and clock corrections from the international GNSS Monitoring and Assessment System (iGMAS) observations using the uncombined PPP model. The dual-frequency raw ambiguities are combined by the integer coefficients (4,− 3) and (1,− 1) to directly estimate the FCBs. The details of FCB estimation are described with the Global Positioning System (GPS), BeiDou-2 Navigation Satellite System (BDS-2) and Galileo Navigation Satellite System (Galileo). For the estimated FCBs, the Root Mean Squares (RMSs) of the posterior residuals are smaller than 0.1 cycles, which indicates a high consistency for the float ambiguities. The stability of the WL FCBs series is better than 0.02 cycles for the three GNSS systems, while the STandard Deviation (STD) of the NL FCBs for BDS-2 is larger than 0.139 cycles. The combined FCBs have better stability than the raw series. With the multi-GNSS FCB products, the PPP AR for GPS/BDS-2/Galileo is demonstrated using the raw observations. For hourly static positioning results, the performance of the PPP AR with the three-system observations is improved by 42.6%, but only 13.1% for kinematic positioning results. The results indicate that precise and reliable positioning can be achieved with the PPP AR of GPS/BDS-2/Galileo, supported by multi-GNSS satellite orbit, clock, and FCB products based on iGMAS.

scholarly journals Real-Time Precise Point Positioning Using Orbit and Clock Corrections as Quasi-Observations for Improved Detection of Faults

2018 ◽  
Vol 71 (4) ◽  
pp. 769-787 ◽  
Author(s):  
Ahmed El-Mowafy
Keyword(s):  
Real Time ◽  
Precise Point Positioning ◽  
Exclusion Process ◽  
Satellite Orbit ◽  
Satellite System ◽  
Navigation Satellite ◽  
System Service ◽  
Point Positioning ◽  
Predicted Values ◽  
Global Navigation Satellite

Real-time Precise Point Positioning (PPP) relies on the use of accurate satellite orbit and clock corrections. If these corrections contain large errors or faults, either from the system or by meaconing, they will adversely affect positioning. Therefore, such faults have to be detected and excluded. In traditional PPP, measurements that have faulty corrections are typically excluded as they are merged together. In this contribution, a new PPP model that encompasses the orbit and clock corrections as quasi-observations is presented such that they undergo the fault detection and exclusion process separate from the observations. This enables the use of measurements that have faulty corrections along with predicted values of these corrections in place of the excluded ones. Moreover, the proposed approach allows for inclusion of the complete stochastic information of the corrections. To facilitate modelling of the orbit and clock corrections as quasi-observations, International Global Navigation Satellite System Service (IGS) real-time corrections were characterised over a six-month period. The proposed method is validated and its benefits are demonstrated at two sites using three days of data.

A Precise Weighting Approach with Application to Combined L1/B1 GPS/BeiDou Positioning

2014 ◽  
Vol 67 (5) ◽  
pp. 911-925 ◽  
Author(s):  
Changsheng Cai ◽  
Lin Pan ◽  
Yang Gao
Keyword(s):  
Time Window ◽  
A Priori ◽  
Estimation Method ◽  
Satellite System ◽  
Positioning Accuracy ◽  
Satellite Systems ◽  
Beidou System ◽  
Component Estimation ◽  
Navigation Service ◽  
Global Navigation Satellite

The BeiDou system has been providing a regional navigation service since 27 December 2012. The Global Navigation Satellite System (GNSS) user community will benefit from combined Global Positioning System (GPS)/BeiDou positioning due to improved positioning accuracy, reliability and availability. But to achieve the best positioning solutions, precise weights of the GPS and BeiDou observations are important since this involves the processing of measurements from two different satellite systems with different quality. Currently, a priori variances are typically used to determine the weights of different types of observations. However, such an approach may not be precise since many un-modelled errors are not accounted for. The Helmert variance component estimation method is more appropriate in this case to determine the weights of GPS and BeiDou observations. This requires high redundant observations in order to obtain reliable solutions, which will be a concern in the case of insufficient numbers of visible satellites. To address this issue, a weighting approach is proposed by a combination of the Helmert method and a moving-window average filter. In this approach, the filter is applied to combine all epoch-by-epoch weight estimates within a time window. As a result, more precise and reliable weights for GPS and BeiDou observations can be obtained at every epoch. Both static and kinematic tests in open sky and under tree environments are conducted to assess the performance of the new weighting approach. The results indicate significantly improved positioning accuracy.

scholarly journals Ionospheric corrections tailored to the Galileo High Accuracy Service

2021 ◽  
Vol 95 (12) ◽  
Author(s):  
A. Rovira-Garcia ◽  
C. C. Timoté ◽  
J. M. Juan ◽  
J. Sanz ◽  
G. González-Casado ◽  
...  
Keyword(s):  
Satellite Orbit ◽  
Satellite System ◽  
High Accuracy ◽  
Integer Ambiguity ◽  
Electron Content ◽  
Confidence Bounds ◽  
Total Electron ◽  
Phase Measurements ◽  
Model Geometry ◽  
Global Navigation Satellite

AbstractThe Galileo High Accuracy Service (HAS) is a new capability of the European Global Navigation Satellite System that is currently under development. The Galileo HAS will start providing satellite orbit and clock corrections (i.e. non-dispersive effects) and soon it will also correct dispersive effects such as inter-frequency biases and, in its full capability, ionospheric delay. We analyse here an ionospheric correction system based on the fast precise point positioning (Fast-PPP) and its potential application to the Galileo HAS. The aim of this contribution is to present some recent upgrades to the Fast-PPP model, with the emphasis on the model geometry and the data used. The results show the benefits of integer ambiguity resolution to obtain unambiguous carrier phase measurements as input to compute the Fast-PPP model. Seven permanent stations are used to assess the errors of the Fast-PPP ionospheric corrections, with baseline distances ranging from 100 to 1000 km from the reference receivers used to compute the Fast-PPP corrections. The 99% of the GPS and Galileo errors in well-sounded areas and in mid-latitude stations are below one total electron content unit. In addition, large errors are bounded by the error prediction of the Fast-PPP model, in the form of the variance of the estimation of the ionospheric corrections. Therefore, we conclude that Fast-PPP is able to provide ionospheric corrections with the required ionospheric accuracy, and realistic confidence bounds, for the Galileo HAS.

scholarly journals Investigating the GALILEO and BeiDou orbit accuracy derived from rapid products

2020 ◽  
Vol 3 (1) ◽  
pp. 316-321
Author(s):  
Sermet Ogutcu ◽  
Salih Alcay ◽  
Omer Faruk Atiz
Keyword(s):  
Orbit Determination ◽  
Precise Orbit Determination ◽  
Solar Radiation Pressure ◽  
Satellite Orbit ◽  
Satellite System ◽  
Precise Orbit ◽  
Yaw Attitude ◽  
Global Navigation Satellite ◽  
Cross Track ◽  
Mean Square Errors

In recent years, the advances of the new Global Navigation Satellite System (GNSS) constellations including, Galileo and BeiDou (BDS), have undergone dramatic changes. Some analysis centers (ACs) produce precise orbit and clock products of Galileo and BeiDou constellations. Currently, three types of Galileo and BeiDou satellite orbit and clock products are available – namely, precise, rapid and ultra-rapid products –. Ultra-rapid and rapid products are generally used for time-constrained applications. Precise orbit determination (POD) of Galileo and BeiDou is much challenging compared with GPS and GLONASS constellations due to the officially undetermined receiver phase center offset (PCO), variations (PCV) of Galileo and BeiDou constellations and, also some other not well-defined factors such as yaw-attitude models and solar radiation pressure. In this study, GALILEO orbit accuracy is investigated using rapid products produced by Center for Orbit Determination in Europe (CODE) GeoForschungsZentrum (GFZ) and Wuhan University (WUHAN), while GFZ and WUHAN rapid products are used for BeiDou constellation only. One month (January) of data in 2020 is used to compute errors of radial, along-track, and cross-track components of Galileo and BeiDou orbit derived by rapid products compared with the CODE final Multi-GNSS Experiment (MGEX) product which is assumed as the reference product. The results show that no significant differences between the products are found for Galileo orbit. For BeiDou orbit, WUHAN rapid product produced the smaller root mean square errors (RMSEs) of orbit components compared with the GFZ rapid product.

Peer-to-Peer Cooperative Positioning between GNSS Receivers

2013 ◽  
Vol 341-342 ◽  
pp. 614-620
Author(s):  
Qiang Chang ◽  
Qun Li ◽  
Hong Tao Hou ◽  
Xiang Hui Zeng
Keyword(s):  
Real Time ◽  
Satellite System ◽  
Peer To Peer ◽  
Indoor Environments ◽  
Cooperative Positioning ◽  
Performance Loss ◽  
Positioning Strategy ◽  
Beidou System ◽  
Gnss Receivers ◽  
Global Navigation Satellite

Global navigation satellite system (GNSS)-like the Global Positioning System (GPS) and the future Chinese Beidou system-can deliver very good position estimates under optimum conditions. However, especially in critical positioning scenarios like urban canyons or indoor environments the performance loss would be very high or GNSS based positioning is even not possible. Based on the concept of Cooperative Positioning in acquiring real-time positioning information of mobile robots, GNSS Peer-to-Peer Cooperative Positioning (P2P-CP) technology is proposed to overcome the shortage of GNSS positioning. Terrestrial ranging and communication modular are equipped with GNSS receivers to construct real-time CP network. The terrestrial ranging and communication modular respectively used for distance measurement and communication between nearby GNSS receivers, distributed algorithms are applied to fuse pseudorange and neighbors nodes distance to calculate the nodes position. Current research results of GNSS CP show that this new positioning strategy gets equal or better precision with less time cost compared with Assisted GNSS (AGNSS).

scholarly journals Spatial Characterization of GNSS Multipath Channels

2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
Hatef Keshvadi ◽  
Ali Broumandan ◽  
Gérard Lachapelle
Keyword(s):  
Fading Channels ◽  
Multipath Fading ◽  
Satellite System ◽  
Handheld Devices ◽  
Angle Of Arrival ◽  
Multipath Fading Channel ◽  
Coherent Integration ◽  
Global Navigation Satellite ◽  
Beamforming Technique

There is a growing interest in detecting and processing Global Navigation Satellite System (GNSS) signals in indoors and urban canyons by handheld devices. To overcome the signal attenuation problem in such adverse fading environments, long coherent integration is normally used. Moving the antenna arbitrarily while collecting signals is generally avoided as it temporally decorrelates the signals and limits the coherent integration gain. This decorrelation is a function of the antenna displacement and geometry of reflectors and angle of arrival of the received signal. Hence, to have an optimum receiver processing strategy it is crucial to characterize the multipath fading channel parameters. Herein, Angle of Arrival (AoA) and Angle Spread (AS) along with signal spatial correlation coefficient and fading intensity in GNSS multipath indoor channels are defined and quantified theoretically and practically. A synthetic uniform circular array utilizing a right-hand circular polarized (RHCP) antenna has been used to measure the spatial characteristics of indoor GNSS fading channels. Furthermore, rotating effect of a circular polarized antenna on the synthetic array processing and AoA estimation has been characterized. The performance of the beamforming technique via array gain is also assessed to explore the advantages and limitations of beamforming in fading conditions.

scholarly journals Assessment of Centre National d’Études Spatiales Real-Time Ionosphere Maps in Instantaneous Precise Real-Time Kinematic Positioning over Medium and Long Baselines

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2293 ◽  
Author(s):  
Dariusz Tomaszewski ◽  
Paweł Wielgosz ◽  
Jacek Rapiński ◽  
Anna Krypiak-Gregorczyk ◽  
Rafał Kaźmierczak ◽  
...  
Keyword(s):  
Real Time ◽  
A Priori ◽  
Satellite Orbit ◽  
Satellite System ◽  
Ionospheric Delay ◽  
Reference Station ◽  
Atmospheric Effects ◽  
International Gnss Service ◽  
Real Time Kinematic ◽  
Global Navigation Satellite

Precise real-time kinematic (RTK) Global Navigation Satellite System (GNSS) positioning requires fixing integer ambiguities after a short initialization time. Originally, it was assumed that it was only possible at a relatively short distance from a reference station (<10 km), because otherwise the atmospheric effects prevent effective ambiguity fixing. Nowadays, through the use of VRS, MAC, or FKP corrections, the distances to the closest reference station have been increased to around 35 km. However, the baselines resolved in real time are not as far as in the case of static positioning. Further extension of the baseline requires the use of an ionosphere-weighted model with ionospheric delay corrections available in real time. This solution is now possible thanks to the Radio Technical Commission for Maritime (RTCM) stream of SSR corrections from, for example, Centre National d’Études Spatiales (CNES), the first analysis center to provide it in the context of the International GNSS Service. Then, ionospheric delays are treated as pseudo-observations that have a priori values from the CLK RTCM stream. Additionally, satellite orbit and clock errors are properly considered using space-state representation (SSR) real-time radial, along-track, and cross-track corrections. The following paper presents the initial results of such RTK positioning. Measurements were performed in various field conditions reflecting realistic scenarios that could have been experienced by actual RTK users. We have shown that the assumed methodology was suitable for single-epoch RTK positioning with up to 82 km baseline in solar minimum (30 March 2019) mid and high latitude (Olsztyn, Poland) conditions. We also confirmed that it is possible to obtain a rover position at the level of a few centimeters of precision. Finally, the possibility of using other newer experimental IGS RT Global Ionospheric Maps (GIMs), from Chinese Academy of Sciences (CAS) and Universitat Politècnica de Catalunya (UPC) among CNES, is discussed in terms of their recent performance in the ionospheric delay domain.

Performance Evaluation of the CNAV Broadcast Ephemeris

2019 ◽  
Vol 72 (5) ◽  
pp. 1331-1344
Author(s):  
Ahao Wang ◽  
Junping Chen ◽  
Yize Zhang ◽  
Jiexian Wang ◽  
Bin Wang
Keyword(s):  
Global Navigation Satellite System ◽  
Single Point ◽  
Satellite Orbit ◽  
Satellite System ◽  
Single Frequency ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Navigation Message ◽  
Global Navigation ◽  
Global Navigation Satellite

The new Global Positioning System (GPS) Civil Navigation Message (CNAV) has been transmitted by Block IIR-M and Block IIF satellites since April 2014, both on the L2C and L5 signals. Compared to the Legacy Navigation Message (LNAV), the CNAV message provides six additional parameters (two orbit parameters and four Inter-Signal Correction (ISC) parameters) for prospective civil users. Using the precise products of the International Global Navigation Satellite System Service (IGS), we evaluate the precision of satellite orbit, clock and ISCs of the CNAV. Additionally, the contribution of the six new parameters to GPS Single Point Positioning (SPP) is analysed using data from 22 selected Multi-Global Navigation Satellite System Experiment (MGEX) stations from a 30-day period. The results indicate that the CNAV/LNAV Signal-In-Space Range Error (SISRE) and orbit-only SISRE from January 2016 to March 2018 is of 0·5 m and 0·3 m respectively, which is improved in comparison with the results from an earlier period. The ISC precision of L1 Coarse/Acquisition (C/A) is better than 0·1 ns, and those of L2C and L5Q5 are about 0·4 ns. Remarkably, ISC correction has little effect on the single-frequency SPP for GPS users using civil signals (for example, L1C, L2C), whereas dual-frequency SPP with the consideration of ISCs results have an accuracy improvement of 18·6%, which is comparable with positioning accuracy based on an ionosphere-free combination of the L1P (Y) and L2P (Y) signals.

Sign in / Sign up

Export Citation Format

Share Document