scholarly journals A New Method to Improve the Fracturing Effect of Coal Seams by Using Preset Slots and Induced Stress Shadows

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Li Li ◽  
Lei Zhou ◽  
Honglian Li ◽  
Binwei Xia ◽  
Junping Zhou
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Fracture Network ◽  
Coal Bed ◽  
Hydraulic Fractures ◽  
Large Area ◽  
Multiple Fractures ◽  
Complex Fracture ◽  
Induced Stress ◽  
Complex Fracture Network

Efficient extraction of coal bed methane before coal mining is essential to eliminate the risk of coal-gas outbursts. However, stimulation technologies should be implemented to enhance the conductivity of the coal seam. In this study, we propose a novel method to create a complex fracture network in underground coal mines with the integration of multiple hydraulic slotting and hydraulic fracturing. In this method, hydraulic slots are used to direct hydraulic fractures and initialize branch fractures, while hydraulic fracturing is used to extend the fractures. Given the mutually exclusive and attractive propagation of multiple fractures, a relatively evenly distributed fracture network can be generated. The results show that (1) the dynamically induced stress shadows of hydraulic fractures can cause exclusive and attractive propagation of multiple hydraulic fractures; (2) a preset slot that deviates from the principal stress can direct hydraulic fractures to a certain extent and generate branch fractures; and (3) with a staggered distribution of preset slots, a relatively large volume of the coal seam in both the minimum and maximum horizontal stress directions can be stimulated, creating a complex fracture network including many vertical branch fractures and a large area of horizontally layered directional fractures.

Induced Stress and Interaction of Fractures During Hydraulic Fracturing in Shale Formation

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Desheng Zhou ◽  
Peng Zheng ◽  
Jiao Peng ◽  
Pei He
Keyword(s):  
Hydraulic Fracturing ◽  
Principal Stress ◽  
Hydraulic Fracture ◽  
Fracture Network ◽  
Hydraulic Fractures ◽  
Single Fracture ◽  
Complex Fracture ◽  
Induced Stress ◽  
Transverse Distance ◽  
Complex Fracture Network

Creating complex fracture network by hydraulic fracturing operation in unconventional reservoir development is the key factor of effective exploitation. The mechanism of creating a fracture network is not clear up to today. Conventional hydraulic fracturing theory is based on tensile failure of a rock, and a hydraulic fracture is widely accepted as propagating along the direction of in situ maximum horizontal principal stress in the industry. Based on rock elastic mechanics and fracture mechanics, considering combined tensile and shear failures, the maximum circumferential strain criterion and boundary element method (BEM), the paper studies the induced stress and its variation during a fracture propagation, the interaction between two or more hydraulic fractures, and the interaction between a hydraulic fracture and a natural crack. The paper shows that a propagating fracture will produce induced stresses on surrounding rock and form a stress shadow. Instead of propagation along the direction of maximum horizontal principal stress as a single fracture, the outside two fractures of two or more hydraulic fractures are exclusive and turning away from each other. A natural crack may be awaked and extend at its both tips by a propagating hydraulic fracture before their intersection, and the hydraulic fracture may deflect toward the natural crack. The interaction between a hydraulic fracture and a natural crack depends on the transverse distance between them and the initial length of the crack. The shorter the transverse distance and the longer the crack length are, the higher the possibility of the crack to be awaked is. The research results are helpful in understanding complex fracture network and may be used in determining hydraulic fracture places to create a complex fracture network.

scholarly journals Experimental Investigation on Hydraulic Fractures in the Layered Shale Formation

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Jingyin Wang ◽  
Ying Guo ◽  
Kaixun Zhang ◽  
Guangying Ren ◽  
Jinlong Ni
Keyword(s):  
Acoustic Emission ◽  
Hydraulic Fracturing ◽  
Fracture Network ◽  
Injection Rate ◽  
Vertical Stress ◽  
Hydraulic Fractures ◽  
Stress Difference ◽  
Complex Fracture ◽  
Fracturing Process ◽  
Complex Fracture Network

Multistage fracturing of horizontal wells to form a complex fracture network is an essential technology in the exploitation of shale gas. Different from the conventional reservoirs, the mechanical characteristics of shale rock have significant heterogeneity due to the existence of beddings, which makes it difficult to predict the fracture geometry in the shale reservoir. Based on the laboratory experiments, the factors that affect fracture propagation were analyzed. The experimental results revealed that the hydraulic fracture would cross the beddings under the high vertical stress difference, while it would propagate along with the bedding under the low vertical stress difference; besides, the low injection rate and viscosity of the fracturing fluid were beneficial to generate a complex fracture network. Under the high injection rate and viscosity, a planar fracture was created, while a nonplanar fracture was observed under the low injection rate and viscosity, and branch fracture was created. According to the acoustic emission events, the shear events were the main events that occurred during the hydraulic fracturing process, and the acoustic emission events could be adopted to describe the fracture network. Lastly, the supercritical carbon dioxide fracturing was more effective compared with the hydraulic fracturing because the fracture network was more complex.

Predicting Well Performance in Naturally Fractured Reservoir

2013 ◽  
Author(s):  
Yunsuk Hwang ◽  
Jiajing Lin ◽  
David Schechter ◽  
Ding Zhu
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Network ◽  
Darcy Flow ◽  
Natural Fracture ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Well Performance ◽  
Fracture Networks ◽  
Complex Fracture ◽  
Complex Fracture Network

Multiple hydraulic fracture treatments in reservoirs with natural fractures create complex fracture networks. Predicting well performance in such a complex fracture network system is an extreme challenge. The statistical nature of natural fracture networks changes the flow characteristics from that of a single linear fracture. Simply using single linear fracture models for individual fractures, and then summing the flow from each fracture as the total flow rate for the network could introduce significant error. In this paper we present a semi-analytical model by a source method to estimate well performance in a complex fracture network system. The method simulates complex fracture systems in a more reasonable approach. The natural fracture system we used is fractal discrete fracture network model. We then added multiple dominating hydraulic fractures to the natural fracture system. Each of the hydraulic fractures is connected to the horizontal wellbore, and some of the natural fractures are connected to the hydraulic fractures through the network description. Each fracture, natural or hydraulically induced, is treated as a series of slab sources. The analytical solution of superposed slab sources provides the base of the approach, and the overall flow from each fracture and the effect between the fractures are modeled by applying the superposition principle to all of the fractures. The fluid inside the natural fractures flows into the hydraulic fractures, and the fluid of the hydraulic fracture from both the reservoir and the natural fractures flows to the wellbore. This paper also shows that non-Darcy flow effects have an impact on the performance of fractured horizontal wells. In hydraulic fracture calculation, non-Darcy flow can be treated as the reduction of permeability in the fracture to a considerably smaller effective permeability. The reduction is about 2% to 20%, due to non-Darcy flow that can result in a low rate. The semi-analytical solution presented can be used to efficiently calculate the flow rate of multistage-fractured wells. Examples are used to illustrate the application of the model to evaluate well performance in reservoirs that contain complex fracture networks.

scholarly journals Numerical simulation on the simultaneous stress interference of parallel multiple hydraulic fractures

2021 ◽  
pp. 014459872110019
Author(s):  
Weiyong Lu ◽  
Changchun He
Keyword(s):  
Principal Stress ◽  
Hydraulic Fracture ◽  
Stress Ratio ◽  
Fracture Network ◽  
Hydraulic Fractures ◽  
Fracture Spacing ◽  
Induced Stress ◽  
Minimum Principal Stress ◽  
Fracturing Process ◽  
Stress Ratios

During horizontal well staged fracturing, there is stress interference between multiple transverse fractures in the same perforation cluster. Theoretical analysis and numerical calculation methods are applied in this study. We analysed the mechanism of induced stress interference in a single fracture under different fracture spacings and principal stress ratios. We also investigated the hydraulic fracture morphology and synchronous expansion process under different fracture spacings and principal stress ratios. The results show that the essence of induced stress is the stress increment in the area around the hydraulic fracture. Induced stress had a dual role in the fracturing process. It created favourable ground stress conditions for the diversion of hydraulic fractures and the formation of complex fracture network systems, inhibited fracture expansion in local areas, stopped hydraulic fractures, and prevented the formation of effective fractures. The curves of the maximum principal stress, minimum principal stress, and induced principal stress difference with distance under different fracture lengths, different fracture spacings, and different principal stress ratios were consistent overall. With a small fracture spacing and a small principal stress ratio, intermediate hydraulic fractures were difficult to initiate or arrest soon after initiation, fractures did not expand easily, and the expansion speed of lateral hydraulic fractures was fast. Moreover, with a smaller fracture spacing and a smaller principal stress ratio, hydraulic fractures were more prone to steering, and even new fractures were produced in the minimum principal stress direction, which was beneficial to the fracture network communication in the reservoir. When the local stress and fracture spacing were appropriate, the intermediate fracture could expand normally, which could effectively increase the reservoir permeability.

Numerical Simulation of Complex Fracture Network Development by Hydraulic Fracturing in Naturally Fractured Ultratight Formations

2013 ◽  
Author(s):  
Hannes Hofmann ◽  
Tayfun Babadagli ◽  
Günter Zimmermann
Keyword(s):  
Fracture Network ◽  
Natural Fracture ◽  
Fracture Networks ◽  
Network Development ◽  
Complex Fracture ◽  
Fracture Patterns ◽  
Fracture Systems ◽  
Fracture Development ◽  
Complex Fracture Network ◽  
Treatment Designs

The creation of large complex fracture networks by hydraulic fracturing is imperative for enhanced oil recovery from tight sand or shale reservoirs, tight gas extraction, and Hot-Dry-Rock (HDR) geothermal systems to improve the contact area to the rock matrix. Although conventional fracturing treatments may result in bi-wing fractures, there is evidence by microseismic mapping that fracture networks can develop in many unconventional reservoirs, especially when natural fracture systems are present and the differences between the principle stresses are low. However, not much insight is gained about fracture development as well as fluid and proppant transport in naturally fractured tight formations. In order to clarify the relationship between rock and treatment parameters, and resulting fracture properties, numerical simulations were performed using a commercial Discrete Fracture Network (DFN) simulator. A comprehensive sensitivity analysis is presented to identify typical fracture network patterns resulting from massive water fracturing treatments in different geological conditions. It is shown how the treatment parameters influence the fracture development and what type of fracture patterns may result from different treatment designs. The focus of this study is on complex fracture network development in different natural fracture systems. Additionally, the applicability of the DFN simulator for modeling shale gas stimulation and HDR stimulation is critically discussed. The approach stated above gives an insight into the relationships between rock properties (specifically matrix properties and characteristics of natural fracture systems) and the properties of developed fracture networks. Various simulated scenarios show typical conditions under which different complex fracture patterns can develop and prescribe efficient treatment designs to generate these fracture systems. Hydraulic stimulation is essential for the production of oil, gas, or heat from ultratight formations like shales and basement rocks (mainly granite). If natural fracture systems are present, the fracturing process becomes more complex to simulate. Our simulation results reveal valuable information about main parameters influencing fracture network properties, major factors leading to complex fracture network development, and differences between HDR and shale gas/oil shale stimulations.

scholarly journals Performance-based fractal fracture model for complex fracture network simulation

2017 ◽  
Vol 15 (1) ◽  
pp. 126-134 ◽  
Author(s):  
Wen-Dong Wang ◽  
Yu-Liang Su ◽  
Qi Zhang ◽  
Gang Xiang ◽  
Shi-Ming Cui
Keyword(s):  
Network Simulation ◽  
Fracture Network ◽  
Fracture Model ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Fractal Fracture
Sign in / Sign up

Export Citation Format

Share Document