scholarly journals Impacts of Different Driving Automation Levels on Highway Geometric Design from the Perspective of Trucks

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Shuyi Wang ◽  
Bin Yu ◽  
Yang Ma ◽  
Jinzhou Liu ◽  
Wen Zhou
Keyword(s):  
Traffic Safety ◽  
Geometric Design ◽  
Driving Safety ◽  
Innovative Technology ◽  
Design Elements ◽  
The Road ◽  
Positive Effects ◽  
Sight Distance ◽  
Automation Systems ◽  
On The Road

Truck automation is emerging as an innovative technology with benefits in traffic safety and the economy to revolutionize freight traffic. Despite these benefits, the potential negative or positive effects of different driving automation levels (from no automation to full automation) on highway geometry remained to be determined. In this study, differences related to sight distance characteristics among varied automation levels were firstly discussed and calibrated. Then, seven analysis scenarios of typical levels were proposed. Based on each level with tailored characteristics, the current models of geometric design elements including the required stopping sight distance, horizontal sight line offset, and lengths of vertical curves were revised. Finally, impacts of each level on computed values of those elements were evaluated. Results show that high or full driving automation could substantially lower the requirements of geometric design. Active safety systems have a similar role but with less significant effects. Differently, the driver assistance and partial or conditional automation systems put a higher demand on the road geometric design in terms of driving safety. Outcomes of this study can be used to design real-world geometry of dedicated lanes and provide a methodological basis for the operation of different driving automation features.

scholarly journals Variation of reaction forces on the axles of the road train depending on road longitudinal slope

2021 ◽  
Vol 264 ◽  
pp. 05030
Author(s):  
Shaukat Khakimov ◽  
Erkin Fayzullaev ◽  
Azimjon Rakhmonov ◽  
Rustam Samatov
Keyword(s):  
Traffic Safety ◽  
Front Axle ◽  
Driving Safety ◽  
The Road ◽  
Longitudinal Slope ◽  
Calculation Results ◽  
Reaction Forces ◽  
Design Diagram ◽  
On The Road

The article discusses the influence of the road longitudinal slope on variation in reaction forces on the wheels of the road train. The description of the longitudinal slope of the road and methods of its determination are given. The design diagram of the forces and moments acting on the road train during its movement uphill and downhill is presented. Equations for calculating the change in the load on the three axles of the road train, depending on the longitudinal slope of the road and the mode of movement, are presented. Based on the calculation results, graphs were constructed to illustrate the change in loads on three axles of the road train. The results show that the changes in the normal reactions on the front axle of the road train are significant, affecting the braking properties and driving safety of the vehicle. The scheme for calculating the variation in loads on the axles of a road train can be used to automatically adjust the braking forces between the wheels depending on the loads and thereby ensure traffic safety.

A Distinct Patch of Road Visual Guidance System – The Design of 2D Stereo Deceleration Zone

2014 ◽  
Vol 912-914 ◽  
pp. 1073-1076
Author(s):  
Xiang Yang Wan
Keyword(s):  
Traffic Safety ◽  
Guidance System ◽  
Stereo Image ◽  
Driving Safety ◽  
Specific Information ◽  
Information Need ◽  
Response Delay ◽  
Visual Guidance ◽  
The Road ◽  
On The Road

City Visual Guidance System is the standard of communication in the order life, to the general, text and images can express all kinds of city mark, but the traffic signs which contains specific information need trained drivers through several conversion, which response delay time enough impacted on traffic safety, such as setting the hard deceleration strip on the road. This thesis presents the design of 2D stereo deceleration zone, with plane logo produced the stereo image effect, this active and timely means can ensure the driving safety, and does not damage the vehicle, also can be used for the extension, is a distinct patch of Road Visual Guidance System.

New Active Light-Emitting Warning Guidance System

2013 ◽  
Vol 765-767 ◽  
pp. 2031-2036
Author(s):  
Yang Yan ◽  
Jie Song
Keyword(s):  
Traffic Safety ◽  
Field Experiments ◽  
Road Traffic ◽  
Guidance System ◽  
Driving Safety ◽  
Sleep Mode ◽  
Light Emitting ◽  
The Road ◽  
Road Traffic Safety ◽  
On The Road

Drivers driving safety on the highway is one of the important researches about the national road traffic safety, and how to reduce the high incidence of special sections accidents has always been the primary task of the research. When driving on the highway at night or in bad weather, drivers vision will be limited because of the poor light conditions and their recognition and perceptual speed of the road distance will be reduced, which will easily lead to major accidents. In order to solve this problem, the article introduces a new active light-emitting warning and guidance system which can automatically identify the field environment. After electrified, each grid will automatically set up the wireless network, and create a series of dynamic warning effects. It has been proved by field experiments that the developed system could stay in sleep mode during the day, and would be woken up at night or in rainy and foggy weather and automatically warned and guided the drivers driving on the road. The system will effectively enhance the drivers vision and reduce the accident probability.

Advance Information on the Road: A Simulator Study of the Effect of Road Markings

1976 ◽  
Vol 18 (6) ◽  
pp. 521-532 ◽  
Author(s):  
Harald Witt ◽  
Carl G. Hoyos
Keyword(s):  
Driving Simulator ◽  
Driving Behavior ◽  
Speed Profile ◽  
The Road ◽  
Positive Effects ◽  
Road Signs ◽  
Advance Information ◽  
Simulator Study ◽  
On The Road ◽  
Accident Statistics

Accident statistics and studies of driving behavior have shown repeatedly that curved roads are hazardous. It was hypothesized that the safety of curves could be improved by indicating in advance the course of the road in a more effective way than do traditional road signs. A code of sequences of stripes put on right edge of the pavement was developed to indicate to the driver the radius of the curve ahead. The main characteristic of this code was the frequency of transitions from code elements to gaps between elements. The effect of these markings was investigated on a driving simulator. Twelve subjects drove on simulated roads of different curvature and with different placement of the code in the approach zone. Some positive effects of the advance information could be observed. The subjects drove more steadily, more precisely, and with a more suitable speed profile.

scholarly journals The Effects of ITS Application in Speed Management on State Road From Mali Pozarevac to Kragujevac

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović
Keyword(s):  
Traffic Safety ◽  
Traffic Management ◽  
Quality Data ◽  
Transport Systems ◽  
Speed Limit ◽  
Accident Risk ◽  
The Road ◽  
Road Users ◽  
Speed Management ◽  
On The Road

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.

scholarly journals Exploring the Informal Communication of Driver-to-Driver on Roads: A Case Study of Durban City, South Africa.

2021 ◽  
Vol 67 (4) ◽  
pp. 1-8
Author(s):  
Jacob Adedayo Adedeji ◽  
Xoliswa Feikie
Keyword(s):  
South African ◽  
Traffic Safety ◽  
Road Traffic ◽  
Structured Interview ◽  
Road User ◽  
Novice Drivers ◽  
The Road ◽  
Road Users ◽  
Hand Signal ◽  
On The Road

Road traffic fatality is rated as one of the ten causes of death in the world and with various preventive measures on a global level, this prediction is only placed on flat terrain and didn’t reduce. Nevertheless, road users’ communication is an essential key to traffic safety. This communication, be it formal or informal between the road users is an important factor for smooth traffic flow and safety. Communication language on roads can be categorized into; formal device-based signal (formal signal), formal hand signal (formal signal), informal device-based signal (informal signal), and informal gesture-based signal (everyday signal). However, if the intent of the message conveys is not properly understood by the other road user, mistakes and errors may set in. Overall, the formal signal is based on explicit learning which occurs during the driving training and the license testing process and the informal, implicit learning occur during the actual driving process on the road unintentionally. Furthermore, since the informal signal is not a prerequisite to driving or taught in driving schools, novice drivers are clueless and thus, might have contributed to errors and mistakes which leads to traffic fatalities. Therefore, this study seeks to document the informal means of communication between drivers on South African roads. Consequently, a qualitative semi-structured interview questionnaire would be used in the collection of informal signals, which were predominantly used on South African roads from driving instructors and thereafter, a focus group of passengers’ car, commercial and truck drivers will be used to validate the availability and their understanding of these informal signals using a Likert-type scale for the confidence level. In conclusion, the information gathered from this study will help improve road safety and understanding of road users especially drivers on the necessity of communication and possible adaptation for other developing countries.

scholarly journals STUDI KERUSAKAN JALAN DITINJAU DARI FAKTOR SETEMPAT (STUDI KASUS RUAS JALAN BLANGKEJEREN – LAWE AUNAN)

2018 ◽  
Vol 1 (3) ◽  
pp. 667-678
Author(s):  
Mulyadi Mulyadi ◽  
Muhammad Isya ◽  
Sofyan M. Saleh
Keyword(s):  
Traffic Safety ◽  
Condition Index ◽  
Road Surface ◽  
Primary Data ◽  
Soil Conditions ◽  
Pavement Condition ◽  
Local Factors ◽  
The Road ◽  
Pavement Condition Index ◽  
On The Road

Abstract: Blangkejeren - Lawe Aunan road conditions overall is on the slopes of the mountains which is strongly influenced by local environmental factors such as drainage, topography, soil conditions, material conditions and vehicle load conditions across the road. It should be noted in order to avoid a decrease in the road quality due to road surface damage that can affect the traffic safety, comfort and smoothness.. Therefore, it is necessary to study the evaluation of the condition of the damaged road surface and the local factors that affect the damage in order to avoid a decrease in the roads quality. This study took place on Blangkejeren - Lawe Aunan roads started from Sta. 529 + 700 - Sta. 535 + 206. Generally, the condition of roads in this segment were found damage that disturb the comfort, smoothness and safety of the roads users. In this study, the primary data obtained by actual surveys in the form of data field length, width, area, and depth of each type of damage as well as local factors that lead to such damage. Actual field surveys conducted along the 5.506 km, with the distance interval of each segment is 100 m. The secondary data obtained from the relevant institutions and other materials related to this research. This study analyzed the PCI method (Pavement Condition Index) to obtain the level of damage in order to know how to handle, while for the identification of the damage done by observation factors descriptively appropriate observation in the field such as the number of damage points. The results of this study found that the type of damage caused to roads is damage to the cover layer, a hole, and curly. This type of damage that commonly occurs on the road Blangkejeren - Lawe Aunan is damage to the edges with a percentage of 87.30%. The local factors that greatly affect drainage on the percentage of damage is 62.00%. PCI average value is 13.47 which indicates a very bad condition (very poor) and requires maintenance or improvement of reconstruction.Abstrak: Kondisi jalan Blangkejeren – Lawe Aunan secara keseluruhan berada di lereng pegunungan sangat dipengaruhi oleh faktor lingkungan setempat seperti drainase, topografi, kondisi tanah, kondisi material dan kondisi beban kendaraan yang melintasi jalan tersebut. Hal ini perlu diperhatikan agar tidak terjadi penurunan kualitas jalan akibat kerusakan permukaan jalan sehingga dapat mempengaruhi keamanan, kenyamanan, dan kelancaran dalam berlalu lintas. Oleh karena itu, perlu dilakukan penelitian evaluasi terhadap kondisi permukaan jalan yang mengalami kerusakan serta faktor setempat yang mempengaruhi kerusakan tersebut agar tidak terjadi penurunan kualitas jalan. Penelitian ini mengambil lokasi di ruas jalan Blangkejeren – Lawe Aunan yang dimulai dari Sta. 529+700 - Sta. 535+206. Umumnya kondisi ruas jalan pada segmen ini banyak ditemukan kerusakan-kerusakan yang dapat mengganggu kenyamanan, kelancaran, dan keamanan pengguna jalan. Dalam penelitian ini data primer diperoleh dengan melakukan survei aktual lapangan yaitu berupa data panjang, lebar, luasan, dan kedalaman tiap jenis kerusakan serta faktor setempat yang mengakibatkan kerusakan tersebut. Survei aktual lapangan dilakukan sepanjang 5,506 km, dengan jarak interval setiap segmen adalah 100 m. Adapun data sekunder diperoleh dari lembaga terkait dan bahan lainnya yang berhubungan dengan penelitian ini. Penelitian ini dianalisis dengan metode PCI (Pavement Condition Index) untuk mendapatkan tingkat kerusakan agar diketahui cara penanganannya, sedangkan untuk identifikasi faktor kerusakannya dilakukan dengan pengamatan secara diskriptif sesuai hasil pengamatan di lapangan berupa jumlah titik kerusakan. Hasil penelitian ini didapatkan bahwa jenis kerusakan yang terjadi pada ruas jalan adalah kerusakan lapisan penutup, lubang, dan keriting. Jenis kerusakan yang umum terjadi pada ruas jalan Blangkejeren – Lawe Aunan adalah kerusakan tepi dengan persentase 87,30 %. Faktor setempat yang sangat mempengaruhi kerusakan adalah drainase dengan persentase 62,00%. Nilai PCI rata-rata yaitu 13,47 yang menunjukkan kondisi sangat buruk (very poor) dan memerlukan pemeliharaan peningkatan atau rekonstruksi.

PREVENTION OF ADMINISTRATIVE OFFENSES IN THE FIELD OF ROAD TRAFFIC BY THE INTERNAL AFFAIRS BODIES

2021 ◽  
pp. 38-40
Author(s):  
А.Р. Исмагилова
Keyword(s):  
Traffic Safety ◽  
Road Traffic ◽  
The State ◽  
Road Accidents ◽  
The Road ◽  
Internal Affairs ◽  
On The Road

В статье раскрываются полномочия сотрудников подразделений пропаганды Государственной инспекции безопасности дорожного движения в целях профилактики дорожно-транспортных происшествий и травматизма на дороге. The article reveals the powers of the employees of the propaganda units of the State Traffic Safety Inspectorate in order to prevent road accidents and injuries on the road.

scholarly journals An Initial Investigation of the Effects of a Fully Automated Vehicle Fleet on Geometric Design

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
John Khoury ◽  
Kamar Amine ◽  
Rima Abi Saad
Keyword(s):  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Real Life ◽  
Geometric Design ◽  
Design Elements ◽  
Sight Distance ◽  
Human Driver ◽  
Projected Change ◽  
Vehicle Fleet ◽  
Stopping Sight Distance

This paper investigates the potential changes in the geometric design elements in response to a fully autonomous vehicle fleet. When autonomous vehicles completely replace conventional vehicles, the human driver will no longer be a concern. Currently, and for safety reasons, the human driver plays an inherent role in designing highway elements, which depend on the driver’s perception-reaction time, driver’s eye height, and other driver related parameters. This study focuses on the geometric design elements that will directly be affected by the replacement of the human driver with fully autonomous vehicles. Stopping sight distance, decision sight distance, and length of sag and crest vertical curves are geometric design elements directly affected by the projected change. Revised values for these design elements are presented and their effects are quantified using a real-life scenario. An existing roadway designed using current AASHTO standards has been redesigned with the revised values. Compared with the existing design, the proposed design shows significant economic and environmental improvements, given the elimination of the human driver.

Vehicle Detection and Tracking in Complex Traffic Circumstances with Roadside LiDAR

2019 ◽  
Vol 2673 (9) ◽  
pp. 62-71 ◽  
Author(s):  
Zhenyao Zhang ◽  
Jianying Zheng ◽  
Hao Xu ◽  
Xiang Wang
Keyword(s):  
High Resolution ◽  
Traffic Safety ◽  
Traffic Accidents ◽  
Vehicle Detection ◽  
Traffic Data ◽  
The Road ◽  
Detection And Tracking ◽  
Area Of Interest ◽  
Vehicle Detection And Tracking ◽  
On The Road

The problem of traffic safety has become increasingly prominent owing to the increase in the number of cars. Traffic accidents often occur in an instant, which makes it necessary to obtain traffic data with high resolution. High-resolution micro traffic data (HRMTD) indicates that the spatial resolution reaches the centimeter level and that the temporal resolution reaches the millisecond level. The position, direction, speed, and acceleration of objects on the road can be extracted with HRMTD. In this paper, a LiDAR sensor was installed at the roadside for data collection. An adjacent-frame fusion method for vehicle detection and tracking in complex traffic circumstances is presented. Compared with the previous research, objects can be detected and tracked without object model extraction or a bounding box description. In addition, problems caused by occlusion can be improved using adjacent frames fusion in the vehicle detection and tracking algorithms in this paper. The data processing procedure are as follows: selection of area of interest, ground point removal, vehicle clustering, and vehicle tracking. The algorithm has been tested at different sites (in Reno and Suzhou), and the results demonstrate that the algorithm can perform well in both simple and complex application scenarios.

Sign in / Sign up

Export Citation Format

Share Document