scholarly journals An Experimental Validation of Phase-Based Motion Magnification for Structures with Developing Cracks and Time-Varying Configurations

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
M. Civera ◽  
L. Zanotti Fragonara ◽  
P. Antonaci ◽  
G. Anglani ◽  
C. Surace
Keyword(s):  
High Speed ◽  
Experimental Validation ◽  
Structural Changes ◽  
Rectangular Cross Section ◽  
Low Cost ◽  
Time Varying ◽  
High Definition ◽  
Box Beam ◽  
Motion Magnification ◽  
Low Amplitude

In this study, Computer Vision and Phase-Based Motion Magnification (PBMM) are validated for continuous Structural Health Monitoring (SHM) purposes. The aim is to identify the exact instant of occurrence for damage or abrupt structural changes from video-extracted, very low amplitude (barely visible) vibrations. The study presents three experimental datasets: a box beam with multiple saw cuts of different lengths and angles, a beam with a full rectangular cross section and a mass added at the tip, and the spar of a prototype High-Aspect-Ratio wing. Both mode-shape- and frequency-based approaches are considered, showing the potential to identify the severity and position of the damage as well A high-definition, high-speed camera and a low-cost commercial alternative have been successfully utilised for these video acquisitions. Finally, the technique is also preliminarily tested for outdoor applications with smartphone cameras.

scholarly journals A low-cost, high-speed, multi-channel Arduino-based data acquisition system for wind turbine systems

2019 ◽  
Vol 44 (5) ◽  
pp. 509-518
Author(s):  
David Bradney ◽  
Samuel Evans ◽  
Mu Chu ◽  
Philip Clausen
Keyword(s):  
Data Acquisition ◽  
Wind Turbine ◽  
High Speed ◽  
Low Cost ◽  
High Definition ◽  
Horizontal Axis Wind Turbine ◽  
Data Acquisition Systems ◽  
Controlled Systems ◽  
High Speed Data Acquisition ◽  
High Speed Data

Commercially available high-speed multi-channel data acquisition systems can be expensive to purchase and are generally difficult to tailor to specific applications. Arduino is an open-source prototyping platform that facilitates the design and build of computer controlled systems for a wide variety of uses. This article describes in detail several separate high-speed data acquisition systems that have been integrated to simultaneously acquire data from sensors on the rotor, platform and tower of an operating 5 kW horizontal-axis wind turbine along with wind speed and direction data. Due to the presence of strong magnetic fields at the turbine site, turbine direction and yaw rate were measured using high-definition visual footage from a GoPro® and analysed in a MATLAB script. The processed data from the GoPro system was time-aligned with data from the Arduino-based systems allowing the response of the turbine to be analysed in detail.

Structural changes in silicon-on-insulator material during post-implantation annealing

1986 ◽  
Vol 44 ◽  
pp. 736-737
Author(s):  
C. O. Jung ◽  
S. J. Krause ◽  
S.R. Wilson
Keyword(s):  
Integrated Circuits ◽  
Oxide Layer ◽  
High Speed ◽  
Structural Changes ◽  
Device Fabrication ◽  
Silicon On Insulator ◽  
High Quality ◽  
Radiation Hardened ◽  
Post Implantation ◽  
Very High

Silicon-on-insulator (SOI) structures have excellent potential for future use in radiation hardened and high speed integrated circuits. For device fabrication in SOI material a high quality superficial Si layer above a buried oxide layer is required. Recently, Celler et al. reported that post-implantation annealing of oxygen implanted SOI at very high temperatures would eliminate virtually all defects and precipiates in the superficial Si layer. In this work we are reporting on the effect of three different post implantation annealing cycles on the structure of oxygen implanted SOI samples which were implanted under the same conditions.

Development and production experience of the multilayer curtain-coated linerboard of Ji’an PM No. 3,

TAPPI Journal ◽  
2014 ◽  
Vol 13 (2) ◽  
pp. 17-25
Author(s):  
JUNMING SHU ◽  
ARTHAS YANG ◽  
PEKKA SALMINEN ◽  
HENRI VAITTINEN
Keyword(s):  
Titanium Dioxide ◽  
High Speed ◽  
Food Packaging ◽  
Production Efficiency ◽  
Positive Impact ◽  
Low Cost ◽  
Board Structure ◽  
Flexographic Printing ◽  
Curtain Coating ◽  
Coating Formulations

The Ji’an PM No. 3 is the first linerboard machine in China to use multilayer curtain coating technology. Since successful startup at the end of 2011, further development has been carried out to optimize running conditions, coating formulations, and the base paper to provide a product with satisfactory quality and lower cost to manufacture. The key challenges include designing the base board structure for the desired mechanical strength, designing the surface properties for subsequent coating operations, optimizing the high-speed running of the curtain coater to enhance production efficiency, minimizing the amount of titanium dioxide in the coating color, and balancing the coated board properties to make them suitable for both offset and flexographic printing. The pilot and mill scale results show that curtain coating has a major positive impact on brightness, while smoothness is improved mainly by the blade coating and calendering conditions. Optimization of base board properties and the blade + curtain + blade concept has resulted in the successful use of 100% recycled fiber to produce base board. The optical, mechanical, and printability properties of the final coated board meet market requirements for both offset and flexographic printing. Machine runnability is excellent at the current speed of 1000 m/min, and titanium dioxide has been eliminated in the coating formulations without affecting the coating coverage. A significant improvement in the total cost of coated white liner production has been achieved, compared to the conventional concept of using virgin fiber in the top ply. Future development will focus on combining low cost with further quality improvements to make linerboard suitable for a wider range of end-use applications, including frozen-food packaging and folding boxboard.

Economic Institutions and Growth Nexus: The Role of Governance and Democratic Institutions—Evidence from Time Varying Parameters’ (TVPs) Models

2016 ◽  
Vol 55 (4I-II) ◽  
pp. 675-688
Author(s):  
Ghulam Murtaza ◽  
Muhammad Zahir Faridi
Keyword(s):  
Structural Changes ◽  
Jel Classification ◽  
Economic Institutions ◽  
Time Varying ◽  
Democratic Institutions ◽  
Main Hypothesis ◽  
Dynamic Relationship ◽  
Rolling Window

The present study has investigated the channels through which the linkage between economic institutions and growth is gauged, by addressing the main hypothesis of the study that whether quality of governance and democratic institutions set a stage for economic institutions to promote the long-term growth process in Pakistan. To test the hypothesis empirically, our study models the dynamic relationship between growth and economic institutions in a time varying framework in order to capture institutional developments and structural changes occurred in the economy of Pakistan over the years. Study articulates that, along with some customary specifics, the quality of government and democracy are the substantial factors that affect institutional quality and ultimately cause to promote growth in Pakistan. JEL Classification: O40; P16; C14; H10 Keywords: Economic Institutions, Growth, Governance and Democracy, Rolling Window Two-stage Least Squares, Pakistan

Low-Cost High-Speed Techniques for Real-Time Simulation of Power Electronic Systems

2007 ◽  
Author(s):  
R. E. Crosbie ◽  
J. J. Zenor ◽  
R. Bednar ◽  
D. Word ◽  
N. G. Hingorani
Keyword(s):  
Real Time ◽  
High Speed ◽  
Low Cost ◽  
Electronic Systems ◽  
Power Electronic ◽  
Real Time Simulation ◽  
Time Simulation

High-speed electro-optic switch using buried electrode structure in polymer Mach–Zehnder waveguide

2016 ◽  
Vol 30 (06) ◽  
pp. 1650063 ◽  
Author(s):  
Jingwen Sun ◽  
Jian Sun ◽  
Yunji Yi ◽  
Lucheng Qv ◽  
Shiqi Sun ◽  
...  
Keyword(s):  
Insertion Loss ◽  
Rise Time ◽  
High Speed ◽  
Low Cost ◽  
Characteristic Parameters ◽  
Electrode Structure ◽  
Processing Cost ◽  
Electro Optic ◽  
Disperse Red 1 ◽  
Excellent Photostability

A low-cost and high-speed electro-optic (EO) switch using the guest–host EO material Disperse Red 1/Polymethyl Methacrylate (DR1/PMMA) was designed and fabricated. The DR1/PMMA material presented a low processing cost, an excellent photostability and a large EO coefficient of 13.1 pm/V. To improve the performance of the switch, the in-plane buried electrode structure was introduced in the polymer Mach–Zehnder waveguide to improve the poling and modulating efficiency. The characteristic parameters of the waveguide and the electrodes were carefully designed and the fabrication process was strictly controlled. Under 1550 nm, the insertion loss of the device was 12.7 dB. The measured switching rise time and fall time of the switch were 50.00 ns and 54.29 ns, respectively.

scholarly journals The Impact of Participation in PPP Projects on Total Factor Productivity of Listed Companies in China

2021 ◽  
Vol 13 (14) ◽  
pp. 7603
Author(s):  
Xiangdong Liu ◽  
Guangxi Cao
Keyword(s):  
Total Factor Productivity ◽  
High Speed ◽  
Operation Mode ◽  
Listed Companies ◽  
Financing Constraints ◽  
Eastern Region ◽  
Time Varying ◽  
Factor Productivity ◽  
The Impact ◽  
China’S Economy

The key to transforming China’s economy from high-speed growth to high-quality development is to improve total factor productivity (TFP). Based on the panel data of China’s listed companies participating in PPP (Public–Private Partnerships) projects from 2010 to 2019, this paper constructs the time-varying DID method to test the impact of participation in PPP projects on the company’s TFP empirically, explore the mechanism of the effect of participation in PPP projects on the company’s TFP, and then conduct heterogeneous analysis from four perspectives: region, industry, ownership form, and operation mode. The empirical results show that participation in PPP projects can significantly promote the growth of the company’s TFP, which mainly comes from the promotion of the innovation level of listed companies and the alleviation of financing constraints by participating in PPP projects. In addition, participation in PPP projects has a significant impact on TFP of listed companies in the eastern region, listed companies in the secondary and tertiary industries, state-owned listed companies, and listed companies participating in PPP projects under the BOT mode.

scholarly journals A low-cost wireless endoscope camera: a preliminary report

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
J. M. Lazarus ◽  
M. Ncube
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Video Transmission ◽  
Low Cost ◽  
Battery Life ◽  
Resource Constrained ◽  
High Definition ◽  
Industry Standard ◽  
Constrained Environments ◽  
The Cost

Abstract Background Technology currently used for surgical endoscopy was developed and is manufactured in high-income economies. The cost of this equipment makes technology transfer to resource constrained environments difficult. We aimed to design an affordable wireless endoscope to aid visualisation during rigid endoscopy and minimally invasive surgery (MIS). The initial prototype aimed to replicate a 4-mm lens used in rigid cystoscopy. Methods Focus was placed on using open-source resources to develop the wireless endoscope to significantly lower the cost and make the device accessible for resource-constrained settings. An off the shelf miniature single-board computer module was used because of its low cost (US$10) and its ability to handle high-definition (720p) video. Open-source Linux software made monitor mode (“hotspot”) wireless video transmission possible. A 1280 × 720 pixel high-definition tube camera was used to generate the video signal. Video is transmitted to a standard laptop computer for display. Bench testing included latency of wireless digital video transmission. Comparison to industry standard wired cameras was made including weight and cost. The battery life was also assessed. Results In comparison with industry standard cystoscope lens, wired camera, video processing unit and light source, the prototype costs substantially less. (US$ 230 vs 28 000). The prototype is light weight (184 g), has no cables tethering and has acceptable battery life (of over 2 h, using a 1200 mAh battery). The camera transmits video wirelessly in near real time with only imperceptible latency of < 200 ms. Image quality is high definition at 30 frames per second. Colour rendering is good, and white balancing is possible. Limitations include the lack of a zoom. Conclusion The novel wireless endoscope camera described here offers equivalent high-definition video at a markedly reduced cost to contemporary industry wired units and could contribute to making minimally invasive surgery possible in resource-constrained environments.

Sign in / Sign up

Export Citation Format

Share Document