scholarly journals A Case Study on the Gas Drainage Optimization Based on the Effective Borehole Spacing in Sima Coal Mine

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Ming Ji ◽  
Zhong-guang Sun ◽  
Wei Sun
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Research Result ◽  
Economic Benefits ◽  
Coal Industry ◽  
Gas Drainage ◽  
Field Coupling ◽  
Drainage Time ◽  
Working Face

Based on the dynamic expressions of permeability and porosity of the coal seam derived in the paper, a multiphysical field coupling numerical model of gas migration under the interaction of stress field and seepage field was established. The gas drainage project #3 Coal Seam operated by Sima Coal Industry Co., Ltd., was selected as the study object. Taking different drainage time periods in various positions of drainage holes into consideration, combined with the advance situation of the 1207 working face in the Sima Coal Mine, a mixed layout gas drainage scheme featured with the effective borehole spacing was obtained through the COMSOL multiphysics simulation. In addition, a series of field industrial tests were performed to validate the research result, revealing that comprehensively considering the extraction time of coal and optimizing the layout of extraction boreholes can effectively improve the engineering economic benefits.

scholarly journals Reasonable Scope of Kilometer Drilling in Lower Layer of Extrathick Coal Seam: A Case Study of Tingnan Coal Mine, China

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Delong Zou ◽  
Xiang Zhang
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Lower Layer ◽  
Maximum Depth ◽  
Support Pressure ◽  
Directional Drilling ◽  
Pressure Relief ◽  
Gas Drainage ◽  
Working Face ◽  
Fracture Development

When stratified mining is adopted in high-gas and extrathick coal seam, a large amount of pressure-relief gas of the lower layer flows into the upper layer goaf along the cracks in the layer, resulting in upper layer working face to frequently exceed the gas limit. And ordinary drilling can no longer meet the requirements of the pressure-relief gas drainage of the lower layer. The 205 working face of Tingnan Coal Mine is taken as the test background in this paper, and based on the “pressure-relief and flow-increase” effect of the lower layer under the action of mining stress during the upper layer mining, the gas drainage of kilometer directional drilling in lower layer is studied. According to the distribution characteristics of support pressure before and after the working face, the pressure-relief principle, fracture development characteristics, and gas migration law of the lower layered coal body are analyzed in the process of advancing the upper layered working face in the extrathick coal seam with high gas. The maximum depth of goaf damage is calculated theoretically, and the Flac3D numerical simulation of the failure deformation of the 205 working face floor is carried out. It is found that the maximum depth of plastic failure of the lower layer is about 13 m. According to the plastic deformation of the lower layer under different vertical depths and the movement of coal and rock mass, it is determined that the reasonable range of kilometer directional drilling in the lower layer is 6–9 m below the floor vertical depth. From 15 m to 45 m in the two parallel grooves, there is no fracture failure with a sharp increase or decrease in the displacement in the local range. Meanwhile, in this part, the roof falling behind is not easy to compaction, and the displacement of the floor is large, which does not cause plastic damage. The degree of pressure relief is more sufficient, and the permeability of the lower layer is good. Therefore, drilling should be arranged as much as possible along the working face in this tendency range. The determination of reasonable arrangement range of kilometer directional drilling in extrathick coal seam provides reference index and theoretical guidance for industrial test of working face and also provides new ideas for gas control of stratified mining face in high-gas and extrathick coal seam.

scholarly journals Numerical simulation study on gas drainage by interval hydraulic flushing in coal seam working face

2021 ◽  
pp. 014459872110102
Author(s):  
Shengrong Xie ◽  
Junqi Cui ◽  
Dongdong Chen ◽  
Ping Chen
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Coal Mine ◽  
Simulation Software ◽  
Gas Pressure ◽  
Gas Extraction ◽  
Gas Drainage ◽  
Drainage Radius ◽  
Working Face ◽  
Effective Drainage

In order to solve the problem of difficult gas extraction in coal mine, a method of gas extraction from coal seam by interval hydraulic flushing is put forward. Based on the coal seam gas occurrence conditions of 7609 working face in Wuyang Coal Mine, the numerical simulation research on gas drainage by ordinary drilling and hydraulic flushing drilling was carried out by using COMSOL numerical simulation software. The results show that with the increase of hydraulic flushing coal quantity, the effective gas drainage radius also increases. The effective extraction radius of ordinary drilling is 0.5 m, and the effective extraction radius is 1.0 m, 1.2 m and 1.3 m respectively when the coal flushing quantity is 0.5t/m, 1.0t/m and 1.5t/m. As multiple boreholes are drained at the same time, the boreholes will affect each other, which will reduce the gas pressure and increase the effective drainage radius, the spacing between boreholes can be greater than twice the effective drainage radius of a single borehole when arranging boreholes. And the smaller the flushing interval, the more uniform the gas pressure reduction area. According to the numerical simulation results, the ordinary drilling and 1.0t/m interval hydraulic flushing test were carried out in the field. Through observation and analysis, the gas concentration of the interval hydraulic flushing drilling module was increased by 31.2% and the drainage purity was increased by 5.77 times compared with the ordinary drilling module. It shows that the interval hydraulic flushing drilling can effectively improve the gas drainage effect.

The Study on Gas Drainage to Gob with Long Bore-Holes at ChangPing Coalmine

2012 ◽  
Vol 524-527 ◽  
pp. 387-390
Author(s):  
Jun Liu ◽  
Lin Wang ◽  
Xian Yao Xin
Keyword(s):  
Coal Mine ◽  
Economic Benefits ◽  
Actual Situation ◽  
Gas Emission ◽  
Gas Drainage ◽  
Working Face

Based on lots of gas emission from gob in mining faces, and the actual situation that gas accumulates in the top corner of the working face in Chang Ping coal mine, it is introduced in the paper that the successful experience about the technology of gas drainage to gob with long bore-holes along roof strike, the conclusion would be had obtained obvious security and economic benefits.

scholarly journals Improvement and application of hole-sealing technology across seams in Song Zao coal mine

2018 ◽  
Vol 53 ◽  
pp. 02003
Author(s):  
Rili Yang ◽  
Xiaoxia Zhao ◽  
Lan Yu
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Field Conditions ◽  
Test Results ◽  
Pressure Relief ◽  
Gas Drainage ◽  
Working Face ◽  
Sealing Material ◽  
Drainage Effect ◽  
The Cost

Through the analysis on the drilling hole gas drainage effect(2225 working face crossing seam drainage, K2air way drilling field layout, crossing seam drainage gas in K3b coal seam),it is found that hole sealing technology directly affects gas drainage. Based on the original hole sealing technology and combining with field conditions, an improved drilling scheme for transportation roadway was proposed, considering the drilling layout, sealing material and depth, grouting time, pre-plunging depth. Test results of the scheme showed that, with a rise in the cost and drilling pressure relief time, the pressuring-relief gas drainage amount was greatly increased, the drilling field pre-pumping concentration was enhanced to 4.4times, the drainage efficiency was improved.

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

scholarly journals Prediction Model for Spontaneous Combustion of Coal around Boreholes Using Bedding Gas Drainage

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Youxin Zhao ◽  
Qingjie Qi ◽  
Xinlei Jia
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Negative Pressure ◽  
Spontaneous Combustion ◽  
Orthogonal Test ◽  
Gas Drainage ◽  
Positive Linear Correlation ◽  
Drainage Hole ◽  
Spontaneous Combustion Of Coal ◽  
Fractured Coal

To accurately and reliably predict the time of spontaneous combustion of fractured coal around a borehole induced by gas drainage along the seam, this study performed an orthogonal test taking the No. 10 Coal Mine of Pingdingshan as the research object, in terms of the suction negative pressure and coal seam buried depth. COMSOL Multiphysics was used to model the orthogonal test results, and a multielement statistical analysis of four factors and their relationships with the spontaneous combustion of coal around the borehole and a single-factor analysis in line with the site conditions were performed on the modeling results through multiple regression. The results showed a nonlinear regression relationship between the sealing hole length, sealing hole depth, negative pressure, and coal seam depth and the spontaneous combustion of the coal around the gas drainage borehole; the prediction regression model is significant. Taking the field gas drainage in the No. 10 Coal Mine of Pingdingshan as an example, the relationship between the time of spontaneous combustion of gas drainage and the drainage pressure follows a power of two. When the drainage negative pressure is less than 45 kPa, the coal around the borehole is more likely to undergo spontaneous combustion with increasing pressure, and the sealing hole length has a positive linear correlation with the time of spontaneous combustion of the coal around the borehole. When the sealing hole length is 23 m, the time of spontaneous combustion of the coal around the gas drainage hole is >500 days, and the coal around the borehole does not easily undergo spontaneous combustion. When the sealing depth is 15 m, the time of spontaneous combustion of the coal around the gas drainage hole is 76 days, which is most likely to cause spontaneous combustion.

Sign in / Sign up

Export Citation Format

Share Document