scholarly journals In Vitro Degradation of PHB/Bacterial Cellulose Biocomposite Scaffolds

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Maria Râpă ◽  
Cătălin Zaharia ◽  
Paul Octavian Stănescu ◽  
Angela Cășărică ◽  
Ecaterina Matei ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Water Absorption ◽  
Bacterial Cellulose ◽  
Saline Solution ◽  
Melt Processing ◽  
In Vitro Degradation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Phosphate Buffered Saline

The present work reported the preparation of biocomposites based on poly(3-hydroxybutyrate) (PHB), plasticizer, and bacterial cellulose (BC) by melt processing and their testing by means of thermal properties (DSC), water absorption, and in vitro degradation. The surface of the biocomposites was analyzed via atomic force microscopy (AFM). In vitro degradation of the biocomposites was evaluated by weight loss and thermal properties (DSC) assessment after the immersion of the specimens in phosphate-buffered saline solution (PBS of pH 7.4) over 20 days. The results showed that the BC can reduce the PHB crystallinity and promote its degradation under PBS medium. Moreover, it was found that the water absorption increased as the percentage of BC increased.

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

2019 ◽  
Author(s):  
Priya Prakash ◽  
Travis Lantz ◽  
Krupal P. Jethava ◽  
Gaurav Chopra
Keyword(s):  
Amyloid Beta ◽  
Western Blots ◽  
Force Microscopy ◽  
E Coli ◽  
Atomic Force ◽  
Set Up ◽  
Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

Targeting Breast Cancer Cells with G4 PAMAM Dendrimers and Valproic Acid Derivative Complexes

2020 ◽  
Vol 20 (15) ◽  
pp. 1857-1872
Author(s):  
Alberto M. Muñoz ◽  
Manuel J. Fragoso-Vázquez ◽  
Berenice P. Martel ◽  
Alma Chávez-Blanco ◽  
Alfonso Dueñas-González ◽  
...  
Keyword(s):  
Valproic Acid ◽  
Cell Lines ◽  
Water Solubility ◽  
Md Simulations ◽  
Pamam Dendrimer ◽  
Pamam Dendrimers ◽  
Force Microscopy ◽  
Micromolar Concentration ◽  
Atomic Force

Background: Our research group has developed some Valproic Acid (VPA) derivatives employed as anti-proliferative compounds targeting the HDAC8 enzyme. However, some of these compounds are poorly soluble in water. Objective: Employed the four generations of Polyamidoamine (G4 PAMAM) dendrimers as drug carriers of these compounds to increase their water solubility for further in vitro evaluation. Methods: VPA derivatives were subjected to Docking and Molecular Dynamics (MD) simulations to evaluate their affinity on G4 PAMAM. Then, HPLC-UV/VIS, 1H NMR, MALDI-TOF and atomic force microscopy were employed to establish the formation of the drug-G4 PAMAM complexes. Results: The docking results showed that the amide groups of VPA derivatives make polar interactions with G4 PAMAM, whereas MD simulations corroborated the stability of the complexes. HPLC UV/VIS experiments showed an increase in the drug water solubility which was found to be directly proportional to the amount of G4 PAMAM. 1H NMR showed a disappearance of the proton amine group signals, correlating with docking results. MALDI-TOF and atomic force microscopy suggested the drug-G4 PAMAM dendrimer complexes formation. Discussion: In vitro studies showed that G4 PAMAM has toxicity in the micromolar concentration in MDAMB- 231, MCF7, and 3T3-L1 cell lines. VPA CF-G4 PAMAM dendrimer complex showed anti-proliferative properties in the micromolar concentration in MCF-7 and 3T3-L1, and in the milimolar concentration in MDAMB- 231, whereas VPA MF-G4 PAMAM dendrimer complex didn’t show effects on the three cell lines employed. Conclusion: These results demonstrate that G4 PAMAM dendrimers are capableof transporting poorly watersoluble aryl-VPA derivate compounds to increase its cytotoxic activity against neoplastic cell lines.

scholarly journals DC and AC Conductivity, Biosolubility and Thermal Properties of Mg-Doped Na2O–CaO–P2O5 Glasses

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2626
Author(s):  
Natalia Anna Wójcik ◽  
Sharafat Ali ◽  
Jakub Lech Karczewski ◽  
Bo Jonson ◽  
Michał Bartmański ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Saline Solution ◽  
Glass Structure ◽  
Glass Network ◽  
Bioactive Glasses ◽  
Dc And Ac Conductivity ◽  
Impedance Spectroscopy Technique ◽  
Mg Content ◽  
Phosphate Buffered Saline ◽  
Mg Doped

Bioactive glasses have recently been extensively used to replace, regenerate, and repair hard tissues in the human body because of their ability to bond with living tissue. In this work, the effects of replacing Na2O with MgO on the electrical, biosolubility, and thermal properties of the target glass 10Na2O–60P2O5–30CaO (in mol%) were investigated. The electrical properties of the glasses were studied with the impedance spectroscopy technique. At 473 K, DC conductivity values decreased from 4.21 × 10−11 to 4.21 × 10−12 S cm−1 after complete substitution of MgO for Na2O. All samples had a similar activation energy of the DC conduction process ~1.27 eV. Conduction mechanisms were found to be due to hop of ions: Na+, Mg2+, and probable H+. FTIR analysis showed that, as the Mg content increased, the Q2 unit (PO2−) shifted towards higher wavenumbers. The proportion of Q3 unit (P2O5) decreased in the glass structure. This confirmed that the replacement of Na+ by Mg2+ was accompanied by concurrent polymerization of the calcium–phosphate glass network. The biosolubility test in the phosphate-buffered saline solution showed that the magnesium addition enhanced the biosolubility properties of Na2O–CaO–P2O5 glasses by increasing their dissolution rate and supporting forming CaP-rich layers on the surface. The glass transition temperature increased, and thermal stability decreased substantially upon substitution of Na2O by MgO.

scholarly journals Osteoblast-Like Cell Behavior on Porous Scaffolds Based on Poly(styrene) Fibers

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Andrada Serafim ◽  
Romain Mallet ◽  
Florence Pascaretti-Grizon ◽  
Izabela-Cristina Stancu ◽  
Daniel Chappard
Keyword(s):  
Interference Microscopy ◽  
Porous Scaffolds ◽  
Allogenic Bone ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dry Spinning ◽  
Bone Trabeculae ◽  
Large Bone

Scaffolds of nonresorbable biomaterials can represent an interesting alternative for replacing large bone defects in some particular clinical cases with massive bone loss. Poly(styrene) microfibers were prepared by a dry spinning method. They were partially melted to provide 3D porous scaffolds. The quality of the material was assessed by Raman spectroscopy. Surface roughness was determined by atomic force microscopy and vertical interference microscopy. Saos-2 osteoblast-like cells were seeded on the surface of the fibers and left to proliferate. Cell morphology, evaluated by scanning electron microscopy, revealed that they can spread and elongate on the rough microfiber surface. Porous 3D scaffolds made of nonresorbable poly(styrene) fibers are cytocompatible biomaterials mimicking allogenic bone trabeculae and allowing the growth and development of osteoblast-like cellsin vitro.

scholarly journals Nanostructural and mechanical changes in the sclera following proteoglycan depletion

2018 ◽  
Vol 2 (2) ◽  
pp. 14-17
Author(s):  
Zhuola Zhuola ◽  
Steve Barrett ◽  
Yalda Ashraf Kharaz ◽  
Riaz Akhtar
Keyword(s):  
Mechanical Properties ◽  
Collagen Fibril ◽  
Enzymatic Degradation ◽  
Ocular Tissues ◽  
Force Microscopy ◽  
Nanomechanical Properties ◽  
Atomic Force ◽  
Fibril Morphology

The mechanical properties of ocular tissues, such as the sclera, have a major impact on healthy eye function, and are governed by the properties and composition of the microstructural components. For example, biomechanical degradation associated with myopia occurs alongside a reduction of proteoglycans (PGs). In this study, the role of PG degradation in the nanomechanical properties of the porcine sclera is explored. In-vitro enzymatic degradation of PGs was conducted with α-amylase and chondroitinase ABC enzymes. Collagen fibril morphology and nanomechanical stiffness were measured with atomic force microscopy (AFM). The elastic modulus of the tissue was reduced in all enzyme-treated samples relative to controls. In addition, collagen fibril organization was disrupted by PG depletion. Our data demonstrate that PGs play an important role in determining not only the mechanical properties at these length scales, but also collagen fibril arrangement.

scholarly journals Visualization by atomic force microscopy of tobacco mosaic virus movement protein–RNA complexes formed in vitro

2001 ◽  
Vol 82 (6) ◽  
pp. 1503-1508 ◽  
Author(s):  
O. I. Kiselyova ◽  
I. V. Yaminsky ◽  
E. M. Karger ◽  
O. Yu. Frolova ◽  
Y. L. Dorokhov ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Tobacco Mosaic Virus ◽  
Mosaic Virus ◽  
Movement Protein ◽  
Structural Conversion ◽  
Force Microscopy ◽  
Rna Transcripts ◽  
Atomic Force ◽  
Rna Complexes

The structure of complexes formed in vitro by tobacco mosaic virus (TMV)-coded movement protein (MP) with TMV RNA and short (890 nt) synthetic RNA transcripts was visualized by atomic force microscopy on a mica surface. MP molecules were found to be distributed along the chain of RNA and the structure of MP–RNA complexes depended on the molar MP:RNA ratios at which the complexes were formed. A rise in the molar MP:TMV RNA ratio from 20:1 to 60–100:1 resulted in an increase in the density of the MP packaging on TMV RNA and structural conversion of complexes from RNase-sensitive ‘beads-on-a-string’ into a ‘thick string’ form that was partly resistant to RNase. The ‘thick string’-type RNase-resistant complexes were also produced by short synthetic RNA transcripts at different MP:RNA ratios. The ‘thick string’ complexes are suggested to represent clusters of MP molecules cooperatively bound to discrete regions of TMV RNA and separated by protein-free RNA segments.

scholarly journals Dynamic mechanisms of CRISPR interference by Escherichia coli CRISPR-Cas3

2021 ◽  
Author(s):  
Kazuto Yoshimi ◽  
Kohei TAKESHITA ◽  
Noriyuki Kodera ◽  
Satomi Shibumura ◽  
Yuko Yamauchi ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
High Speed ◽  
Dna Helicase ◽  
Type I ◽  
Loop Formation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Target Strand ◽  
Target Dna

Type I CRISPR-Cas3 uses an RNA-guided multi Cas-protein complex, Cascade, which detects and degrades foreign nucleic acids via the helicase-nuclease Cas3 protein. Despite many studies using cryoEM and smFRET, the precise mechanism of Cas3-mediated cleavage and degradation of target DNA remains elusive. Here we reconstitute the CRISPR-Cas3 system in vitro to show how the Escherichia coli Cas3 (EcoCas3) with EcoCascade exhibits collateral non-specific ssDNA cleavage and target specific DNA degradation. Partial binding of EcoCascade to target DNA with tolerated mismatches within the spacer sequence, but not the PAM, elicits collateral ssDNA cleavage activity of recruited EcoCas3. Conversely, stable binding with complete R-loop formation drives EcoCas3 to nick the non-target strand (NTS) in the bound DNA. Helicase-dependent unwinding then combines with trans ssDNA cleavage of the target strand and repetitive cis cleavage of the NTS to degrade the target dsDNA substrate. High-speed atomic force microscopy demonstrates that EcoCas3 bound to EcoCascade repeatedly reels and releases the target DNA, followed by target fragmentation. Together, these results provide a revised model for collateral ssDNA cleavage and target dsDNA degradation by CRISPR-Cas3, furthering understanding of type I CRISPR priming and interference and informing future genome editing tools.

scholarly journals In vitro evaluation of microbial adhesion on the different surface roughness of acrylic resin specific for ocular prosthesis

2018 ◽  
Vol 12 (02) ◽  
pp. 176-183 ◽  
Author(s):  
Agda Marobo Andreotti ◽  
Cecília Alves De Sousa ◽  
Marcelo Coelho Goiato ◽  
Emily Vivianne Freitas da Silva ◽  
Cristiane Duque ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Staphylococcus Epidermidis ◽  
Microbial Growth ◽  
Acrylic Resin ◽  
Microbial Adhesion ◽  
Force Microscopy ◽  
Atomic Force ◽  
Colony Forming Units ◽  
Ocular Prostheses

ABSTRACT Objective: The purpose of this study was to evaluate the influence of surface roughness in biofilm formation of four microorganisms (Staphylococcus epidermidis, Staphylococcus aureus, Enterococcus faecalis, and Candida albicans) on acrylic resin surface of ocular prostheses. Materials and Methods: Acrylic resin samples were divided into six groups according to polishing: Group 1200S (1200 grit + silica solution); Group 1200; Group 800; Group 400; Group 120 and Group unpolished. Surface roughness was measured using a profilometer and surface images obtained with atomic force microscopy. Microbial growth was evaluated after 4, 24, and 48 hours of incubation by counting colony-forming units. Statistical Analysis Used: For roughness, it was performed 1-way ANOVA and parametric Tukey test α5% (P ≤ 0.05). For CFU data found, it was applied Kruskal-Wallis and Mann-Whitney tests. Results: Group 120 and 400 presented the highest roughness values. For S. epidermidis and S. aureus, Group 1200S presented the lowest values of microbial growth. For E. faecalis at 4 hour, microbial growth was not observed. C. albicans did not adhere to the acrylic resin. Except for Group 1200S, different surface roughnesses did not statistically interfere with microbial adhesion and growth on acrylic surfaces of ocular prostheses. Conclusions: The roughness did not interfere with the microbial adhesion of the microorganisms evaluated. The use of silica decreases significantly microbial growth.

Sign in / Sign up

Export Citation Format

Share Document