scholarly journals Highly Porous 3D Printed Tantalum Scaffolds Have Better Biomechanical and Microstructural Properties than Titanium Scaffolds

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Huaquan Fan ◽  
Shu Deng ◽  
Wentao Tang ◽  
Aikeremujiang Muheremu ◽  
Xianzhe Wu ◽  
...  
Keyword(s):  
Young’S Modulus ◽  
Uniaxial Compression ◽  
Young's Modulus ◽  
Equivalent Stress ◽  
Biomechanical Properties ◽  
Porous Scaffolds ◽  
Compression Tests ◽  
Bone Scaffolds ◽  
Melting Technique ◽  
3D Printed

Objective. To test the biomechanical properties of 3D printed tantalum and titanium porous scaffolds. Methods. Four types of tantalum and titanium scaffolds with four alternative pore diameters, #1 (1000-700 μm), #2 (700-1000 μm), #3 (500-800 μm), and #4 (800-500 μm), were molded by selective laser melting technique, and the scaffolds were tested by scanning electronic microscope, uniaxial-compression tests, and Young’s modulus tests; they were compared with same size pig femoral bone scaffolds. Results. Under uniaxial-compression tests, equivalent stress of tantalum scaffold was 411 ± 1.43  MPa, which was significantly larger than the titanium scaffolds ( P < 0.05 ). Young’s modulus of tantalum scaffold was 2.61 ± 0.02  GPa, which was only half of that of titanium scaffold. The stress-strain curves of tantalum scaffolds were more similar to pig bone scaffolds than titanium scaffolds. Conclusion. 3D printed tantalum scaffolds with varying pore diameters are more similar to actual bone scaffolds compared with titanium scaffolds in biomechanical properties.

scholarly journals Influence of Degradation Products on the Elastic Stiffness Properties of Porous Absorbable Scaffolds Made From Bioabsorbable Metals

2021 ◽  
Author(s):  
Jannik Bühring ◽  
Maximilian Voshage ◽  
Johannes Heinrich Schleifenbaum ◽  
Holger Jahr ◽  
Kai-Uwe Schröder
Keyword(s):  
Finite Element ◽  
Young’S Modulus ◽  
Degradation Products ◽  
Young's Modulus ◽  
Element Model ◽  
Elastic Stiffness ◽  
Porous Scaffolds ◽  
Compression Tests ◽  
Substrate Layer ◽  
Stiffness Properties

For orthopaedic applications, additive manufactured (AM) porous scaffolds made of absorbable metals like magnesium, zinc or iron are of particular interest. They do not only offer the potential to design and fabricate bio-mimetic or rather bone equivalent mechanical properties, they also do not need to be removed in further surgery. Located in a physiological environment, scaffolds made of absorbable metals show a decreasing Young&rsquo;s modulus over time, due to product dissolution. For WE43 scaffolds, during the first days an increase of the smeared Young's modulus can be observed, which is mainly attributed to a forming substrate layer of degradation products on the struts surfaces. In this study the influence of degradation products on the stiffness properties of metallic scaffolds is investigated. For this, analytical calculations and finite element simulations are performed to study the influence of the substrate layer thickness and Young's modulus for single struts and for a new scaffold geometry with adapted polar f2cc,z unit cells. The finite element model is further validated by compression tests on AM scaffolds made from Zn1Mg. The results show, that even low thicknesses and Young's moduli of the substrate layer increases significantly the smeared Young's modulus under axial compression.

scholarly journals Influence of Degradation Product Thickness on the Elastic Stiffness of Porous Absorbable Scaffolds Made from an Bioabsorbable Zn–Mg Alloy

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6027
Author(s):  
Jannik Bühring ◽  
Maximilian Voshage ◽  
Johannes Henrich Schleifenbaum ◽  
Holger Jahr ◽  
Kai-Uwe Schröder
Keyword(s):  
Finite Element ◽  
Young’S Modulus ◽  
Degradation Products ◽  
Young's Modulus ◽  
Element Model ◽  
Elastic Stiffness ◽  
Porous Scaffolds ◽  
Compression Tests ◽  
Young’S Moduli ◽  
Substrate Layer

For orthopaedic applications, additive manufactured (AM) porous scaffolds made of absorbable metals such as magnesium, zinc or iron are of particular interest. They do not only offer the potential to design and fabricate bio-mimetic or rather bone-equivalent mechanical properties, they also do not need to be removed in further surgery. Located in a physiological environment, scaffolds made of absorbable metals show a decreasing Young’s modulus over time, due to product dissolution. For magnesium-based scaffolds during the first days an increase of the smeared Young’s modulus can be observed, which is mainly attributed to a forming substrate layer of degradation products on the strut surfaces. In this study, the influence of degradation products on the stiffness properties of metallic scaffolds is investigated. For this, analytical calculations and finite-element simulations are performed to study the influence of the substrate layer thickness and Young’s modulus for single struts and for a new scaffold geometry with adapted polar cubic face-centered unit cells with vertical struts (f2cc,z). The finite-element model is further validated by compression tests on AM scaffolds made from Zn1Mg (1 wt% Mg). The results show that even low thicknesses and Young’s moduli of the substrate layer significantly increases the smeared Young’s modulus under axial compression.

Simulation of Uniaxial Compression for Flexible Fibers of Wheat Straw Using the Discrete Element Method

2021 ◽  
Vol 64 (6) ◽  
pp. 2025-2034
Author(s):  
Matthew W Schramm ◽  
Mehari Z. Tekeste ◽  
Brian L Steward
Keyword(s):  
Discrete Element Method ◽  
Wheat Straw ◽  
Young’S Modulus ◽  
Uniaxial Compression ◽  
Material Properties ◽  
Young's Modulus ◽  
Discrete Element ◽  
Flexible Fibers ◽  
Dem Model ◽  
Element Method

HighlightsSimulation of uniaxial compression was performed with flexible fibers modeled in DEM.Bond-specific DEM parameters were found to be sensitive in uniaxial compression.A calibration technique that is not plunger-dependent is shown and validated.Abstract. To accurately simulate a discrete element method (DEM) model, the material properties must be calibrated to reproduce bulk material behavior. In this study, a method was developed to calibrate DEM parameters for bulk fibrous materials using uniaxial compression. Wheat straw was cut to 100.2 mm lengths. A 227 mm diameter cylindrical container was loosely filled with the cut straw. The material was pre-compressed to 1 kPa. A plunger (50, 150, or 225 mm diameter) was then lowered onto the compressed straw at a rate of 15 mm s-1. This experimental procedure was simulated using a DEM model for different material properties to generate a simulated design of experiment (DOE). The simulated plunger had a travel rate of 40 mm s-1. The contact Young’s modulus, bond Young’s modulus, and particle-to-particle friction DEM parameters were found to be statistically significant in the prediction of normal forces on the plunger in the uniaxial compression test. The DEM calibration procedure was used to approximate the mean laboratory results of wheat straw compression with root mean square (RMS) percent errors of 3.77%, 3.02%, and 13.90% for the 50, 150, and 225 mm plungers, respectively. Keywords: Calibration, DEM, DOE, Flexible DEM particle, Uniaxial compression, Wheat straw.

scholarly journals Root Traits and Biomechanical Properties of Three Tropical Pioneer Tree Species for Forest Restoration in Landslide Areas

Forests ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 179 ◽  
Author(s):  
Lee ◽  
Chu ◽  
Lin ◽  
Kung ◽  
Lin ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Young’S Modulus ◽  
Tree Species ◽  
Young's Modulus ◽  
Root Traits ◽  
Biomechanical Properties ◽  
Pioneer Species ◽  
Root Tensile Strength ◽  
Pioneer Tree ◽  
Macaranga Tanarius

Frequent earthquakes, monsoon torrential rains and typhoons cause severe landslides and soil erosion in Taiwan. Hibiscus taiwanensis, Macaranga tanarius, and Mallotus paniculatus are major pioneer tree species appearing on landslide-scarred areas. Thus, these species can be used to restore the self-sustaining native vegetation on forest landslides, to control erosion, and to stabilize slope. However, their growth performance, root traits and biomechanical properties have not been well characterized. In this study, root system and root traits were investigated using the excavation method, and biomechanical tests were performed to determine the uprooting resistance, root tensile strength and Young’s modulus of 1-year-old Hibiscus taiwanensis, Macaranga tanarius, and Mallotus paniculatus seedlings. The results reveal that relative to H. taiwanensis, M. tanarius and M. paniculatus seedlings had significantly larger root collar diameter, longer taproot length, higher root biomass, higher root density, higher root length density, heavier root mass, larger external root surface area, higher root tissue density, larger root volume, longer total root length, and a higher root tip number. Additionally, the height of M. paniculatus seedlings was significantly higher than those of H. taiwanensis and M. tanarius. Furthermore, the uprooting resistance and root tensile strength of M. paniculatus seedlings was significantly higher than those of H. taiwanensis and M. tanarius. Young’s modulus of M. paniculatus and M. tanarius seedlings was also significantly higher than that of H. taiwanensis. These growth characteristics and biomechanical properties demonstrate M. paniculatus and M. tanarius are superior than H. taiwanensis, considering growth performance, root anchorage capability, tensile strength and Young’s modulus. Taken as a whole, the rank order for species selection of these pioneer species for reforestation comes as: M. paniculatus M. tanarius H. taiwanensis. These results, along with knowledge on vegetation dynamics following landslides, allow us to better evaluate the effect of selective removal management of pioneer species on the resilience and sustainability of landslides.

Fabrication and Testing of Planar Stent Mesh Designs Using Carbon-Infiltrated Carbon Nanotubes

2013 ◽  
Vol 4 (2) ◽  
Author(s):  
Kristopher Jones ◽  
Brian D. Jensen ◽  
Anton Bowden
Keyword(s):  
Carbon Nanotubes ◽  
Young’S Modulus ◽  
Fracture Strain ◽  
Young's Modulus ◽  
Chemical Vapor ◽  
Pyrolytic Carbon ◽  
Compression Tests ◽  
Element Analysis ◽  
Percent Elongation ◽  
Fea Model

This paper explores and demonstrates the potential of using pyrolytic carbon as a material for coronary stents. Stents are commonly fabricated from metal, which has worse biocompatibilty than many polymers and ceramics. Pyrolytic carbon, a ceramic, is currently used in medical implant devices due to its preferable biocompatibility properties. Micropatterned pyrolytic carbon implants can be created by growing carbon nanotubes (CNTs), and then filling the space between with amorphous carbon via chemical vapor deposition (CVD). We prepared multiple samples of two different stent-like flexible mesh designs and smaller cubic structures out of carbon-infiltrated carbon nanotubes (CI-CNT). Tension loads were applied to expand the mesh samples and we recorded the forces at brittle failure. The cubic structures were used for separate compression tests. These data were then used in conjunction with a nonlinear finite element analysis (FEA) model of the stent geometry to determine Young's modulus and maximum fracture strain in tension and compression for each sample. Additionally, images were recorded of the mesh samples before, during, and at failure. These images were used to measure an overall percent elongation for each sample. The highest fracture strain observed was 1.4% and Young's modulus values confirmed that the material was similar to that used in previous carbon-infiltrated carbon nanotube work. The average percent elongation was 86% with a maximum of 145%. This exceeds a typical target of 66%. The material properties found from compression testing show less stiffness than the mesh samples; however, specimen evaluation reveals poorly infiltrated samples.

Investigation of Material Properties of One-Piece Glass Fiber Post-and-Core Affecting Biomechanical Responses of the Restorative System

2010 ◽  
Vol 160-162 ◽  
pp. 1691-1698 ◽  
Author(s):  
Zhi Xin Huang ◽  
Cai Fu Qian ◽  
Peng Liu ◽  
Xu Liang Deng ◽  
Qing Cai ◽  
...  
Keyword(s):  
Shear Modulus ◽  
Young’S Modulus ◽  
Material Properties ◽  
Poisson’S Ratio ◽  
Young's Modulus ◽  
Equivalent Stress ◽  
Poisson's Ratio ◽  
Fiber Post ◽  
Maximum Deformation ◽  
Maximum Equivalent Stress

This study aimed at investigating the effects of the post material properties on the maximum stress in the root and maximum deformation of the restorative system. Effects of material properties of fiber post on the maximum equivalent stress in the root and the maximum deformation of the restorative system were numerically investigated. Results show that the maximum equivalent stress in the root can be decreased by 8.3% and the maximum deformation of the restorative system decreased by 10% compared with corresponding maximum values if changing Young’s modulus, Shear modulus and Poisson’s ratio in the range studied here. The maximum equivalent stress in the root is more sensitive to Young’s modulus and Poisson’s ratio while the deformation of the restorative system is more seriously affected by the Shear modulus of the post material.

The Influence of the Bauschinger Effect on the Yield Stress, Young’s Modulus, and Poisson’s Ratio of a Gun Barrel Steel

2005 ◽  
Vol 128 (2) ◽  
pp. 179-184 ◽  
Author(s):  
J. Perry ◽  
M. Perl ◽  
R. Shneck ◽  
S. Haroush
Keyword(s):  
Plastic Deformation ◽  
Yield Stress ◽  
Young’S Modulus ◽  
Poisson’S Ratio ◽  
Bauschinger Effect ◽  
Young's Modulus ◽  
Poisson's Ratio ◽  
Compression Tests ◽  
Residual Stress Field ◽  
Gun Barrel

The Bauschinger effect (BE) was originally defined as the phenomenon whereby plastic deformation causes a loss of yield strength restraining in the opposite direction. The Bauschinger effect factor (BEF), defined as the ratio of the yield stress on reverse loading to the initial yield stress, is a measure of the magnitude of the BE. The aim of the present work is to quantitatively evaluate the influence of plastic deformation on other material properties such as Young’s modulus and Poisson’s ratio for gun barrel steel, thus extending the definition of the Bauschinger effect. In order to investigate the change in this material’s properties resulting from plastic deformation, several uniaxial tension and compression tests were performed. The yield stress and Young’s modulus were found to be strongly affected by plastic strain, while Poisson’s ratio was not affected at all. An additional result of these tests is an exact zero offset yield point definition enabling a simple evaluation of the BEF. A simple, triphase test sufficient to characterize the entire elastoplastic behavior is suggested. The obtained experimental information is readily useful for autofrettage residual stress field calculations.

scholarly journals GEOMETRY AND MECHANICAL PROPERTIES OF A 3D-PRINTED TITANIUM MICROSTRUCTURE

2018 ◽  
Vol 15 ◽  
pp. 104-108
Author(s):  
Luboš Řehounek ◽  
Petra Hájková ◽  
Petr Vakrčka ◽  
Aleš Jíra
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Uniaxial Compression ◽  
Elastic Moduli ◽  
Weight Ratio ◽  
Porous Structures ◽  
Compression Tests ◽  
Local Material ◽  
3D Printed ◽  
Titanium Microstructure

Construction applications sometimes require use of a material other than construction steel or concrete – mainly in cases, where strength to weight ratio needs to be considered. A suitable solution to this problem are structures manufactured using the 3D printing process, as they have a very good strength to weight ratio (i.e.: Ti-6Al-4V – σ<sub>ult</sub> = 900 MPa and ρ = 4500 kg/m<sup>3</sup>). Trabecular structures are porous structures with local material characteristics identical to their commonly manufactured counterparts, but due to their geometry, they have different global mechanical properties and are suited for special applications. We designed and manufactured six variants of these structures and subjected them to uniaxial compression tests, nanoindentation tests and subsequently evaluated their differences and elastic moduli. The values of global moduli E are in the range of 2.55 GPa – 3.55 GPa for all specimens.

Sign in / Sign up

Export Citation Format

Share Document