scholarly journals The Investigation on Initiation and Propagation of Hydraulic Fractures in Shale Reservoir

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Xiangjun Liu ◽  
Wei Lei ◽  
Jing Huang ◽  
Yi Ding ◽  
Lixi Liang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Bedding Plane ◽  
Fracture Network ◽  
Natural Fracture ◽  
Strong Anisotropy ◽  
Bedding Planes ◽  
Initiation And Propagation ◽  
Shale Reservoir

Hydraulic fracturing is a necessary technique for shale gas exploitation. In order to have efficient stimulation treatment, a complex fracture network has to be developed, whereas with rich bedding planes and natural fractures, the mechanism of forming a fracture network is not fully understood and it is so tricky to predict propagation and initiation of hydraulic fracture. Therefore, in this paper, considering the strong anisotropy of shale reservoir, numerical simulation has been conducted to analyze fracture propagation and initiation on the basis of finite element and damage mechanics. Simulation results indicate that hydraulic fracture is not merely controlled by in situ stress due to strong anisotropy in shale. With plenty of bedding planes, hydraulic fracture tends to have initiation and propagation along the bedding plane. In particular, this influence becomes stronger with low strength and high development density of bedding planes. Additionally, in combination with natural fracture and bedding plane, the initiation point is usually on a natural fracture plane, causing relatively small breakdown pressure. In the process of fracture propagation, hydraulic fracture connects with natural fractures and bedding planes, forming dendritic bifurcation and more complicated paths. Numerical simulation proves that bedding plane and natural fracture are vital factors of hydraulic fracture. Compared to natural fracture, the bedding plane has a stronger impact on hydraulic fracture propagation. For the initiation of hydraulic fracture, natural fracture is the major effecting factor. The outcome of this study is able to offer theoretical guidance for hydraulic fracturing in shale.

scholarly journals Numerical Simulation of Hydraulic Fracture Propagation in Coal Seams with Discontinuous Natural Fracture Networks

Processes ◽  
2018 ◽  
Vol 6 (8) ◽  
pp. 113 ◽  
Author(s):  
Shen Wang ◽  
Huamin Li ◽  
Dongyin Li
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Fracture Network ◽  
Natural Fracture ◽  
Cohesive Element ◽  
Natural Fractures ◽  
Fracture Networks ◽  
Coal Seams ◽  
Hydraulic Fracture Network ◽  
Hydraulic Fracture Propagation

To investigate the mechanism of hydraulic fracture propagation in coal seams with discontinuous natural fractures, an innovative finite element meshing scheme for modeling hydraulic fracturing was proposed. Hydraulic fracture propagation and interaction with discontinuous natural fracture networks in coal seams were modeled based on the cohesive element method. The hydraulic fracture network characteristics, the growth process of the secondary hydraulic fractures, the pore pressure distribution and the variation of bottomhole pressure were analyzed. The improved cohesive element method, which considers the leak-off and seepage behaviors of fracturing liquid, is capable of modeling hydraulic fracturing in naturally fractured formations. The results indicate that under high stress difference conditions, the hydraulic fracture network is spindle-shaped, and shows a multi-level branch structure. The ratio of secondary fracture total length to main fracture total length was 2.11~3.62, suggesting that the secondary fractures are an important part of the hydraulic fracture network in coal seams. In deep coal seams, the break pressure of discontinuous natural fractures mainly depends on the in-situ stress field and the direction of natural fractures. The mechanism of hydraulic fracture propagation in deep coal seams is significantly different from that in hard and tight rock layers.

scholarly journals Numerical simulation of horizontal well network fracturing in glutenite reservoir

2018 ◽  
Vol 73 ◽  
pp. 53
Author(s):  
Minhui Qi ◽  
Mingzhong Li ◽  
Yanchao Li ◽  
Tiankui Guo ◽  
Song Gao
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Horizontal Well ◽  
Fracture Propagation ◽  
Simulation Method ◽  
Fracture Network ◽  
Fluid Viscosity ◽  
Coupled Flow ◽  
Hydraulic Fracture Propagation

Hydraulic fracturing is an economically effective technology developing the glutenite reservoirs, which have far stronger heterogeneity than the conventional sandstone reservoir. According to the field production experience of Shengli Oilfield, horizontal-well fracturing is more likely to develop a complex fractured network, which improves the stimulated volume of reservoir effectively. But the clear mechanism of horizontal-well hydraulic fracture propagation in the glutenite reservoirs is still not obtained, thus it is difficult to effectively carry out the design of fracturing plan. Based on the characteristics of the glutenite reservoirs, a coupled Flow-Stress-Damage (FSD) model of hydraulic fracture propagation is established. The numerical simulation of fracturing expansion in the horizontal well of the glutenite reservoir is conducted. It is shown that a square mesh-like fracture network is developed near the horizontal well in the reservoir with lower stress difference, in which fracture is more prone to propagate along the direction of the minimum principal stress as well. High fracturing fluids injection displacement and high fracturing fluid viscosity lead to the rise of static pressure of the fracture, which results in the rise of fracture complexity, and greater probability to deflect when encountering gravels. As the perforation density increases, the micro-fractures generated at each perforation gather together faster, and the range of the stimulated reservoir is also relatively large. For reservoirs with high gravel content, the complexity of fracture network and the effect of fracture communication are obviously increased, and the range of fracture deflection is relatively large. In the case of the same gravel distribution, the higher the tensile strength of the gravel, the greater fracture tortuosity and diversion was observed. In this paper, a simulation method of horizontal well fracture network propagation in the reservoirs is introduced, and the result provides the theoretical support for fracture network morphology prediction and plan design of hydraulic fracturing in the glutenite reservoir.

scholarly journals Investigation of the Fracturing Effect Induced by the Disturbing Stress of Hydrofracturing Using the Bonded-Particle Model

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-24
Author(s):  
Xin Zhang ◽  
Yuqi Zhang ◽  
Bingxiang Huang
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Zone ◽  
Fracture Propagation ◽  
Bedding Plane ◽  
Particle Model ◽  
Hydraulic Fractures ◽  
Bedding Planes ◽  
Geological Conditions ◽  
Hydraulic Fracture Propagation

Hydraulic fracturing applications have shown a stress disturbance effect during hydraulic fracture propagation, which is often ignored. Using laboratory and discrete element numerical simulation tests, hydraulic fracture propagation under this stress disturbance is systematically studied. The results show that during hydraulic fracturing, the bedding plane is damaged by the stress disturbance, forming a bedding fracture zone (BFZ). The nonlinear fracture characteristics of the formation process of the disturbed fracture zone are revealed, and two indexes (the number of fractures in the disturbed fracture zone and the size of the disturbed fracture zone) are proposed to evaluate the fracturing effect of the stress disturbance. Based on these indexes, multifactor sensitivity tests are conducted under different geological conditions and operational factors. When the principal stress ( σ 1 ) difference is large, the number of hydraulic fractures gradually decreases from many to one, and the direction of the hydraulic fractures gradually approaches the vertical direction of σ 3 , but the change in the in situ stress condition has no obvious effect on the stress disturbance effect. The weaker the bonding strength of the bedding plane, the more significant the stress disturbance effect is, and the easier it is for the fractures to expand along the bedding plane. With increasing injection rate, the stress disturbance effect first increases and then decreases, and the hydraulic fracture propagates from along the bedding plane to cross the bedding plane. With increasing relative distance between the injection hole and bedding plane, the stress disturbance effect presents a linearly increasing trend, and the hydraulic fractures along the bedding planes extend. Based on the experimental results, the relationship between the fracturing effect of the stress disturbance and the extension mode of the hydraulic fracture is determined, and an optimization method for hydraulic fracturing in composite rock reservoirs is given. The research results can provide a theoretical basis for controlling the formation of complex fracture networks in composite rock reservoirs.

scholarly journals CO2-Driven Hydraulic Fracturing Trajectories across a Preexisting Fracture

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Qi Zhang ◽  
Jiehao Wang ◽  
Yufeng Gao ◽  
Shengfei Cao ◽  
Jingli Xie ◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Damage Evolution ◽  
Stress Ratio ◽  
Bedding Plane ◽  
Hydraulic Fractures ◽  
The Finite Element Method ◽  
Bedding Planes ◽  
Initiation And Propagation ◽  
Gas Seepage ◽  
Simulation Results

Defining the trajectory of hydraulic fractures crossing bedding planes and other fractures is a significant issue in determining the effectiveness of the stimulation. In this work, a damage evolution law is used to describe the initiation and propagation of the fracture. The model couples rock deformation and gas seepage using the finite element method and is validated against classical theoretical analysis. The simulation results define four basic intersection scenarios between the fluid-driven and preexisting fractures: (a) inserting—the hydraulic fracture inserts into a bedding plane and continues to propagate along it; (b) L-shaped crossing—the hydraulic fracture approaches the fracture/bedding plane then branches into the plane without crossing it; (c) T-shaped crossing—the hydraulic fracture approaches the fracture/bedding plane, branches into it, and crosses through it; (d) direct crossing—the hydraulic fracture crosses one or more bedding planes without branching into them. The intersection scenario changes from (a) → (b) → (c) → (d) in specimens with horizontal bedding planes when the stress ratio β ( β = σ y / σ x ) increases from 0.2 to 5. Similarly, the intersection type changes from (d) → (c) → (a) with an increase in the bedding plane angle α (0° → 90°). Stiffness of the bedding planes also exerts a significant influence on the propagation of hydraulic fractures. As the stiffness ratio E 1 ¯ / E 2 ¯ increases from 0.1 to 0.4 and 0.8, the seepage area decreases from 22.2% to 41.8%, and the intersection type changes from a T-shaped crossing to a direct crossing.

Numerical model on predicting hydraulic fracture propagation in low-permeability sandstone

2020 ◽  
pp. 105678952096320
Author(s):  
Ji Shi ◽  
Jianhua Zhang ◽  
Chunyang Zhang ◽  
Tingting Jiang ◽  
Gang Huang
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Fracture Network ◽  
Natural Fracture ◽  
Low Permeability ◽  
Zone Method ◽  
Crustal Stress ◽  
Complex Fracture ◽  
Complex Fracture Network ◽  
Hydraulic Fracture Propagation

Hydraulic fracture propagation is hard to predict due to natural joints and crustal stress. This process may lead to uncontrollable changes in hydrogeological conditions. Therefore, prediction and control of fracture propagation are paramount to permeability increase in ore-bearing reservoir. The coupled fluid-solid model was utilized to predict the hydraulic fracture propagation in low-permeability sandstone of a uranium mine. For this study, the model was modified to allow fractures to propagate randomly by using the cohesive zone method. The simulation was developed on a three-step process. First, geological data required to run the model, including crustal stress, strength and permeability, were assembled. Next, fracture propagation under different conditions of stress and injection volume were simulated. In the final step, experimental data required to validate the model were obtained. The simulation results indicate that the principal stress, distribution and orientation of natural fracture have vital influence on fracture propagation and induced complex fracture network. This work provides a theoretical basis for the application of hydraulic fracture in low-permeability sandstone reservoir and ensures the possibility to predict the generation of complex fracture network.

Well Shear Associated with Conventional and Unconventional Operations: Diagnosis and Mechanisms

2021 ◽  
pp. 1-18
Author(s):  
Russell T. Ewy
Keyword(s):  
Cross Sections ◽  
Slip Surface ◽  
Bedding Plane ◽  
Vertical Stress ◽  
Natural Fracture ◽  
Shear Deformations ◽  
Horizontal Fracture ◽  
Bedding Planes ◽  
Shear Slip ◽  
Fluid Pressurization

Summary Wells are sometimes deformed due to geomechanical shear slip, which occurs on a localized slip surface, such as a bedding plane, fault, or natural fracture. This can occur in the overburden above a conventional reservoir (during production) or within an unconventional reservoir (during completion operations). Shear slip will usually deform the casing into a recognizable shape, with lateral offset and two opposite-trending bends, and ovalized cross sections. Multifinger casing caliper tools have a recognizable response to this shape and are especially useful for diagnosing well shear. Certain other tools can also provide evidence for shear deformation. Shear deformations above a depleting, compacting reservoir are usually due to slip on bedding planes. They usually occur at multiple depths and are driven by overburden bending in response to reservoir differential compaction. Shear deformations in unconventional reservoirs, for the examples studied, have been found to be caused by slip on bedding planes and natural fractures. In both cases, models, field data, and physical reasoning suggest that slip occurs primarily due to fluid pressurization of the interface. In the case of bedding plane slip, fracturing pressure greater than the vertical stress (in regions where the vertical stress is the intermediate stress) could lead to propagation of a horizontal fracture, which then slips in shear.

Sign in / Sign up

Export Citation Format

Share Document