scholarly journals Mechanical Damage and Chemical Dissolution Kinetic Features of Limestone under Coupled Mechanical-Hydrological-Chemical Effects

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Wuxiu Ding ◽  
Hongyi Wang ◽  
Huajun Chen ◽  
Tao Ma
Keyword(s):  
Ph Value ◽  
Research Result ◽  
Strength Loss ◽  
Dissolution Kinetic ◽  
Peak Strength ◽  
Engineering Practice ◽  
Chemical Dissolution ◽  
Solution Ph ◽  
Static State ◽  
Limestone Dissolution

To address the mechanical damages of limestone under the coupled mechanical(M)-hydrological(H)-chemical(C) effects, we performed uniaxial compression experiments and dissolution kinetics experiments on limestone in flowing and static solutions for different lengths of time. Through experiments, the peak strengths of the limestone under coupled MHC effects for different time lengths and the major ion concentrations in solutions were obtained. By analyzing the strength damage and chemical dissolution kinetic characteristics, we achieved the strength damage equations and chemical dissolution kinetic equations. Results show that when the solution shifted from the static state to the flowing state, and as its acidity increased, the peak strength loss of the limestone rose as well. The solution mobility had a more significant impact on the peak strength loss than the solution pH value. The limestone dissolution in flowing water was higher than in static water, indicating that solution mobility would promote the limestone dissolution. Among the contributing factors to limestone dissolution, the solution pH value showed the strongest impact, followed by the common-ion effect and then the salt effect. The research result is expected to provide a theoretical basis for maintaining the stability of rocks in geotechnical engineering practice and protection of stone cultural relics.

Study on the Enzyme Desizing Process for Cotton Fabric Using Ultrasonication

2011 ◽  
Vol 331 ◽  
pp. 261-264 ◽  
Author(s):  
Qi Ming Zhao ◽  
Shan Yan Zhang
Keyword(s):  
Cotton Fabric ◽  
Ph Value ◽  
Orthogonal Experiment ◽  
Research Result ◽  
Strength Loss ◽  
Cotton Fabrics ◽  
Optimum Process ◽  
Process Conditions ◽  
Fabric Strength ◽  
Enzyme Dosage

The auxiliary devices of ultrasonic treatment was designed and manufactured. The cotton fabric was desized using 2000L desizing enzyme with the conventional enzyme desizing process and ultrasonic enzyme desizing process respectively. Through the orthogonal experiment, the optimum process conditions of conventional enzyme desizing process and ultrasonic enzyme desizing process were determined. For the conventional enzyme desizing process, the optimized desizing conditions of cotton fabrics were: desizing enzyme dosage was 1.5g/l, temperature was 80°C, PH value was 6, and time was 60mins. The optimum process conditions of ultrasonic enzyme desizing process were: desizing enzyme dosage was 1.5g/l, temperature was 50°C, PH value was 6 and time was 45minutes. The research result indicates that, under the same desizing condition, ultrasonication can improve the desizing percentage and whiteness of cotton fabric, but the fabric strength loss increases slightly. And for the same required desizing percentage, the ultrasonic enzyme desizing process saved time and reduced the temperature of experiments compared with traditional enzyme desizing process

scholarly journals Separation of Radionuclides from a Rare Earth-Containing Solution by Zeolite Adsorption

Minerals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 20
Author(s):  
Deniz Talan ◽  
Qingqing Huang
Keyword(s):  
Rare Earth ◽  
Rare Earths ◽  
Contact Time ◽  
Separation Efficiency ◽  
Ph Value ◽  
Solid Phase ◽  
Separation Performance ◽  
Solution Ph ◽  
Zeolite Sample ◽  
Alternative Sources

The increasing industrial demand for rare earths requires new or alternative sources to be found. Within this context, there have been studies validating the technical feasibility of coal and coal byproducts as alternative sources for rare earth elements. Nonetheless, radioactive materials, such as thorium and uranium, are frequently seen in the rare earths’ mineralization, and causes environmental and health concerns. Consequently, there exists an urgent need to remove these radionuclides in order to produce high purity rare earths to diversify the supply chain, as well as maintain an environmentally-favorable extraction process for the surroundings. In this study, an experimental design was generated to examine the effect of zeolite particle size, feed solution pH, zeolite amount, and contact time of solid and aqueous phases on the removal of thorium and uranium from the solution. The best separation performance was achieved using 2.50 g of 12-µm zeolite sample at a pH value of 3 with a contact time of 2 h. Under these conditions, the adsorption recovery of rare earths, thorium, and uranium into the solid phase was found to be 20.43 wt%, 99.20 wt%, and 89.60 wt%, respectively. The Freundlich adsorption isotherm was determined to be the best-fit model, and the adsorption mechanism of rare earths and thorium was identified as multilayer physisorption. Further, the separation efficiency was assessed using the response surface methodology based on the development of a statistically significant model.

Synthesis and Application of Itaconic Acid Water-Coke Slurry Dispersant

2017 ◽  
Vol 896 ◽  
pp. 167-174 ◽  
Author(s):  
Zhi Yuan Yang ◽  
Zhuo Yue Meng ◽  
Zhi Hua Li ◽  
Si Tong Wang
Keyword(s):  
Surface Tension ◽  
Polyethylene Glycol ◽  
Itaconic Acid ◽  
High Performance ◽  
Ph Value ◽  
Raw Materials ◽  
Esterification Reaction ◽  
Solution Ph ◽  
Powder Surface ◽  
Coke Powder

Polyethylene glycol (PEG-200) and itaconic acid (IA) were used as raw materials to compound macromer through esterification reaction. A new type of specialized water-coke slurry dispersant was synthesized by copolymerization of microware, sodium methallyl sulfonate (SMAS) and maleic anhydride (MA). The experiment showed that the concentration of slurry could be reached to 63% with the dosage of 0.2%, and the apparent viscosity was 1140.3 mPa∙s. Through the analysis of the infrared, the dispersant was confirmed to have polyethylene glycol branched chain and hydrophilic functional groups such as carboxyl or sulfonic group. When the concentration of dispersant was 30 g/L, the surface tension of water could be decreased from 72.70 mN/m to 45.50 mN/m. Furthermore, when the solution pH value was 9, the Zeta potential of semi-coke powder surface could also be decreased from-13.38 mV to-25 mV with the addition of dispersant. Thus, this dispersant could increase electronegativity of semi-coke powder surface, enhance steric-hindrance effect and prevent the phenomenon of powder flocculation and gather. Meantime, it also could reinforce the semi-coke hydrophilic by reducing the surface tension of water effectively. And then, the high performance water-coke slurry could be obtained.

scholarly journals CO2 mineralization by olivine at hydrothermal conditions

2014 ◽  
Vol 78 (6) ◽  
pp. 1473-1477
Author(s):  
Jan Přikryl ◽  
Andri Stefánsson
Keyword(s):  
Ph Value ◽  
Hydrothermal Conditions ◽  
Solution Ph ◽  
Rock Interaction ◽  
Carbonate Formation ◽  
Effects Of Temperature ◽  
Co2 Mineralization ◽  
Geochemical Reaction ◽  
Insight Into ◽  
Water Rock Interaction

The interaction of CO2-rich water with olivine was studied using geochemical reaction modelling in order to gain insight into the effects of temperature, acid supply (CO2) and extent of reaction on the secondary mineralogy, water chemistry and mass transfer. Olivine (Fo93) was dissolved at 150 and 250ºC and pCO2 of 2 and 20 bar in a closed system and an open system with secondary minerals allowed to precipitate. The progressive water–rock interaction resulted in increased solution pH, with gradual carbonate formation starting at pH 5 and various Mg-OH and Mg-Si minerals becoming dominant at pH>8. The major factor determining olivine alteration is the pH of the water. In turn, the pH value is determined by acid supply, reaction progress and temperature.

The Study about Environmentally-Friendly Passivation Technology Process and Performance on Brass Surface

2011 ◽  
Vol 399-401 ◽  
pp. 1967-1971
Author(s):  
Hong Yin Xu ◽  
Li Li
Keyword(s):  
Corrosion Resistance ◽  
Phytic Acid ◽  
Passive Film ◽  
Ph Value ◽  
Sodium Molybdate ◽  
Solution Ph ◽  
Sulfosalicylic Acid ◽  
Passivation Film ◽  
Brass Surface ◽  
And Performance

The paper through the synergy before mixed Phytic acid and Sodium molybdate, Sulfosalicylic acid, Organic silane, and add the active substances PEG, Optimize the Passivation liquid formula of Brass surface, Phytic acid is the main ingredient, study the affection of Phytic acid Passive film Corrosion resistance on the three main Passivation conditions: Passivation temperature, time and Passivation solution PH value. The results show that，Phytic acid passivation film process recipes as follows：Phytic acid (quality score 50%) 2~5ml/L, sodium molybdate 4~8g/L, organic material 10~30ml/L, sulfosalicylic acid 3~7g/L, polyethylene glycol 2~6g/L, deactivated temperature 30~35°C, pH value 5, deactivated time 60s. The test showed that，the phytic acid passive film can obviously enhance the anti-corrosive performance on the brass surface, its corrosion resistance proportion chromates passive film is fairly good.

Hydrothermal Synthesis of Rod-Like Copper Oxide Crystals

2007 ◽  
Vol 534-536 ◽  
pp. 77-80 ◽  
Author(s):  
Jae Hwan Pee ◽  
Dong Wook Lee ◽  
Ungsoo Kim ◽  
Eui Seok Choi
Keyword(s):  
Copper Oxide ◽  
Ph Value ◽  
Copper Nitrate ◽  
Synthesis Temperature ◽  
Particle Size Analysis ◽  
Size Analysis ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
Uniform Size ◽  
Oxide Crystals

A hyrdrothermal reaction process has been developed to prepare rod-like crystals of copper oxide using copper nitrate trihydrate as a function of synthesis temperature, stirring speed and solution pH value. The properties of the fabricated crystals were studied using scanning electron microscopy, X-ray diffraction and particle size analysis. The morphology of the synthesized CuO was dependent on both the pH value of the solution and the morphology of the seed materials. Synthesized particles have regular morphologies and a uniform size distribution.

Effect of Grinding Aids on the Fracture Energy of Mica

2011 ◽  
Vol 402 ◽  
pp. 503-509
Author(s):  
Ze Hong Wang ◽  
Fu Jia Yu ◽  
Shan Cai ◽  
Shan Zhi Deng ◽  
Roger Horn
Keyword(s):  
Sodium Chloride ◽  
Fracture Energy ◽  
Sodium Citrate ◽  
Ph Value ◽  
Sodium Tripolyphosphate ◽  
Experimental System ◽  
Ammonium Bromide ◽  
Solution Ph ◽  
Grinding Aids ◽  
Slurry Rheology

An extension of the classical Obriemoff experiments has been set up to measure the fracture energy of mica. This experimental system will be entirely independent of slurry rheology. CTAB (Cetyl Trimethyl Ammonium Bromide), sodium tripolyphosphate, sodium hexametaphosphate, and tri-sodium citrate are used as grinding aids in this study and the fracture energy has been measured for mica in air, water, and water with the addition of various concentrations of these grinding aids. The results show that the fracture energy of mica in water is about half of what it is in air. Grinding aids are shown to reduce the fracture energy of mica, but not dramatically. Addition of grinding aids reduces the fracture energy by a further 10-20%, with tri-sodium citrate appearing to be the most effective. For each grinding aid there appears to be an optimal concentration, typically around 10 mmol. An experiment is also done with sodium chloride at a range of concentrations to investigate the mechanism of these grinding aids, but no reduction in fracture energy (compared to water) was observed, hence the molecular-level mechanism of action of these grinding aids remains unclear. The effect of solution pH values on the fracture energy are also investigated using tri-sodium citrate and sodium chloride. The results show that the solution pH value may effect on the fracture energy of mica. So, in practice, both concentration and pH value of solution are important for getting better grinding results.

scholarly journals Electrochemical oxidation of sulfamethoxazole using Ti/SnO2-Sb/Co-PbO2 electrode through ANN-PSO

2019 ◽  
Vol 84 (7) ◽  
pp. 713-727 ◽  
Author(s):  
Jiteng Wan ◽  
Chunji Jin ◽  
Banghai Liu ◽  
Zonglian She ◽  
Mengchun Gao ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Electrochemical Oxidation ◽  
Removal Efficiency ◽  
Current Density ◽  
Ph Value ◽  
Ann Model ◽  
Solution Ph ◽  
Pbo2 Electrode ◽  
Artificial Neural Network Ann ◽  
Major Factors

Even in a trace amounts, the presence of antibiotics in aqueous solution is getting more and more attention. Accordingly, appropriate technologies are needed to efficiently remove these compounds from aqueous environments. In this study, we have examined the electrochemical oxidation (EO) of sulfamethoxazole (SMX) on a Co modified PbO2 electrode. The process of EO of SMX in aqueous solution followed the pseudo-first-order kinetics, and the removal efficiency of SMX reached the maximum value of 95.1 % within 60 min. The effects of major factors on SMX oxidation kinetics were studied in detail by single-factor experiments, namely current density (1?20 mA cm-2), solution pH value (2?10), initial concentration of SMX (10?500 mg L-1) and concentration of electrolytes (0.05?0.4 mol L-1). An artificial neural network (ANN) model was used to simulate this EO process. Based on the obtained model, particle swarm optimization (PSO) was used to optimize the operating parameters. The maximum removal efficiency of SMX was obtained at the optimized conditions (e.g., current density of 12.37 mA cm-2, initial pH value of 4.78, initial SMX concentration of 74.45 mg L-1, electrolyte concentration of 0.24 mol L-1 and electrolysis time of 51.49 min). The validation results indicated that this method can ideally be used to optimize the related parameters and predict the anticipated results with acceptable accuracy.

scholarly journals Evaluation of active sludge and aquatic ferns usage for removal of zinc in a biological wastewater treatment system

2019 ◽  
pp. 39-44
Author(s):  
Amir Hajiali ◽  
Lacramioara Diana Robescu
Keyword(s):  
Ph Value ◽  
Reaction Times ◽  
Treatment Method ◽  
Operating Conditions ◽  
Industrial Scale ◽  
Reactor Performance ◽  
Solution Ph ◽  
Active Sludge ◽  
Simple Method ◽  
Aquatic Fern

In this research capability of biological treatment method via active sludge and aquatic fern evaluated in different operating conditions and they were optimized in order to remove Zn (II). A simple reactor performance for treatment of model and real wastewater on laboratory and semi-industrial scale was investigated. This refining process proceeded with special attention to the effect of solution pH-value, pollutant concentration, absorbent concentration and reaction time. The batch semi-industrial scale reactor represented over 90 % removal efficiency under pH-value of 6 and 5-5.5 for aquatic ferns and active sludge, respectively. Effective reaction times represented various durations for aquatic ferns and active sludge with respect of 120 minutes and 90 minutes. The two biological masses had the best performances with 6 g/l for aquatic ferns and 5 g/l for active sludge. In the presence of 5 ppm of Zn (II) as the objective heavy metal, both absorbents had over 93.2 % removal efficiencies. While obviously laboratory-scale attempts introduced higher acceptable reduction efficiencies via this economic applicable treatment method. Additionally, economic considerations clarified feasibility of this recommended simple method.

Sign in / Sign up

Export Citation Format

Share Document