scholarly journals A Novel Adaptive Active Disturbance Rejection Control Strategy to Improve the Stability and Robustness for a Wind Turbine Using a Doubly Fed Induction Generator

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Hammadi Laghridat ◽  
Ahmed Essadki ◽  
Maha Annoukoubi ◽  
Tamou Nasser

A novel and robust active disturbance rejection control (ADRC) strategy for variable speed wind turbine systems using a doubly fed induction generator (DFIG) is presented in this paper. The DFIG is directly connected to the main utility grid by stator, and its rotor is connected through a back-to-back three phase power converter (AC/DC/AC). Due to the acoustic nature of wind and to ensure capturing maximum energy, a control strategy to extract the available maximum power from the wind turbine by using a maximum power point tracking (MPPT) algorithm is presented. Moreover, a pitch actuator system is used to control the blades’ pitch angle of the wind turbine in order to not exceed the wind turbine rated power value in case of strong wind speeds. Furthermore, the rotor-side converter is used to control the active and reactive powers generated by the DFIG. However, the grid-side converter is used to control the currents injected into the utility grid as well as to regulate the DC-link voltage. This paper aims to study and develop two control strategies for wind turbine system control: classical control by proportional integral (PI) and the proposed linear active disturbance rejection control (LADRC). The main purpose here is to compare and evaluate the dynamical performances and sensitivity of these controllers to the DFIG parameter variation. Therefore, a series of simulations were carried out in the MATLAB/Simulink environment, and the obtained results have shown the effectiveness of the proposed strategy in terms of efficiency, rapidity, and robustness to internal and external disturbances.

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 760
Author(s):  
Fang Liu ◽  
Haotian Li ◽  
Ling Liu ◽  
Runmin Zou ◽  
Kangzhi Liu

In this paper, the speed tracking problem of the interior permanent magnet synchronous motor (IPMSM) of an electric vehicle is studied. A cascade speed control strategy based on active disturbance rejection control (ADRC) and a current control strategy based on improved duty cycle finite control set model predictive control (FCSMPC) are proposed, both of which can reduce torque ripple and current ripple as well as the computational burden. First of all, in the linearization process, some nonlinear terms are added into the control signal for voltage compensation, which can reduce the order of the prediction model. Then, the dq-axis currents are selected by maximum torque per ampere (MTPA). Six virtual vectors are employed to FCSMPC, and a novel way to calculate the duty cycle is adopted. Finally, the simulation results show the validity and superiority of the proposed method.


Sign in / Sign up

Export Citation Format

Share Document