scholarly journals Isolation of Cellulose from Wheat Straw Using Alkaline Hydrogen Peroxide and Acidified Sodium Chlorite Treatments: Comparison of Yield and Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-7 ◽  
Author(s):  
Umair Qasim ◽  
Zulfiqar Ali ◽  
Muhammad Shahid Nazir ◽  
Sadaf Ul Hassan ◽  
Sikander Rafiq ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Wheat Straw ◽  
Environmental Concerns ◽  
Sodium Chlorite ◽  
X Ray Diffraction ◽  
Alkaline Hydrogen Peroxide ◽  
X Ray ◽  
Multifunctional Material ◽  
Hydrogen Peroxide Treatment ◽  
Ft Ir

Environmental concerns due to excessive use of synthetic or petroleum-based materials have encouraged scientists to develop novel, sustainable, and multifunctional material using abundant lignocellulosic biomass. In this work, a study was conducted on the isolation of cellulose from wheat straw using two different methods: acidified sodium chlorite and alkaline hydrogen peroxide. A comparative study was carried out based on the yield and properties of extracted cellulose. The final product (after treatments) was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) for the identification of properties. Both the treatments isolated pure white color cellulose. However, the yield of cellulose isolated through acidified sodium chlorite treatment (81.4%) was higher than alkaline hydrogen peroxide treatment (79%). Moreover, no huge difference was observed in the crystallinity and thermal properties of extracted cellulose.

Effects of Alkaline Hydrogen Peroxide Treatment of Wheat Straw on Site and Extent of Digestion in Sheep

1986 ◽  
Vol 63 (3) ◽  
pp. 868-878 ◽  
Author(s):  
M. S. Kerley ◽  
G. C. Fahey ◽  
L. L. Berger ◽  
N. R. Merchen ◽  
J. M. Gould
Keyword(s):  
Hydrogen Peroxide ◽  
Wheat Straw ◽  
Alkaline Hydrogen Peroxide ◽  
Hydrogen Peroxide Treatment

scholarly journals Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1085
Author(s):  
Patricia Castaño-Rivera ◽  
Isabel Calle-Holguín ◽  
Johanna Castaño ◽  
Gustavo Cabrera-Barjas ◽  
Karen Galvez-Garrido ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
High Performance ◽  
Rubber Matrix ◽  
Butadiene Rubber ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rubber Blends ◽  
Ft Ir ◽  
Chloroprene Rubber

Organoclay nanoparticles (Cloisite® C10A, Cloisite® C15) and their combination with carbon black (N330) were studied as fillers in chloroprene/natural/butadiene rubber blends to prepare nanocomposites. The effect of filler type and load on the physical mechanical properties of nanocomposites was determined and correlated with its structure, compatibility and cure properties using Fourier Transformed Infrared (FT-IR), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and rheometric analysis. Physical mechanical properties were improved by organoclays at 5–7 phr. Nanocomposites with organoclays exhibited a remarkable increase up to 46% in abrasion resistance. The improvement in properties was attributed to good organoclay dispersion in the rubber matrix and to the compatibility between them and the chloroprene rubber. Carbon black at a 40 phr load was not the optimal concentration to interact with organoclays. The present study confirmed that organoclays can be a reinforcing filler for high performance applications in rubber nanocomposites.

scholarly journals Electrospun Nanosystems Based on PHBV and ZnO for Ecological Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2123
Author(s):  
Maria Râpă ◽  
Maria Stefan ◽  
Paula Popa ◽  
Dana Toloman ◽  
Cristian Leostean ◽  
...  
Keyword(s):  
Food Packaging ◽  
Spin Trapping ◽  
X Ray Diffraction ◽  
Paramagnetic Resonance ◽  
Hno3 Solution ◽  
X Ray ◽  
Trapping Method ◽  
Ft Ir ◽  
Doped Zno ◽  
Electron Paramagnetic

The electrospun nanosystems containing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and 1 wt% Fe doped ZnO nanoparticles (NPs) (with the content of dopant in the range of 0–1 wt% Fe) deposited onto polylactic acid (PLA) film were prepared for food packaging application. They were investigated by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), antimicrobial analysis, and X-ray photoelectron spectrometry (XPS) techniques. Migration studies conducted in acetic acid 3% (wt/wt) and ethanol 10% (v/v) food simulants as well as by the use of treated ashes with 3% HNO3 solution reveal that the migration of Zn and Fe falls into the specific limits imposed by the legislation in force. Results indicated that the PLA/PHBV/ZnO:Fex electrospun nanosystems exhibit excellent antibacterial activity against the Pseudomonas aeruginosa (ATCC-27853) due to the generation of a larger amount of perhydroxyl (˙OOH) radicals as assessed using electron paramagnetic resonance (EPR) spectroscopy coupled with a spin trapping method.

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

Sign in / Sign up

Export Citation Format

Share Document