scholarly journals A Digital Camera-Based Rotation-Invariant Fingerprint Verification Method

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Sajid Khan ◽  
Dong-Ho Lee ◽  
Asif Khan ◽  
Ahmad Waqas ◽  
Abdul Rehman Gilal ◽  
...  
Keyword(s):  
Feature Matching ◽  
Digital Camera ◽  
Reference Image ◽  
Digital Cameras ◽  
Scale Invariant ◽  
Image Capture ◽  
Verification Method ◽  
Reference Images ◽  
Binary Segmentation ◽  
The Difference

Fingerprint registration and verification is an active area of research in the field of image processing. Usually, fingerprints are obtained from sensors; however, there is recent interest in using images of fingers obtained from digital cameras instead of scanners. An unaddressed issue in the processing of fingerprints extracted from digital images is the angle of the finger during image capture. To match a fingerprint with 100% accuracy, the angles of the matching features should be similar. This paper proposes a rotation and scale-invariant decision-making method for the intelligent registration and recognition of fingerprints. A digital image of a finger is taken as the input and compared with a reference image for derotation. Derotation is performed by applying binary segmentation on both images, followed by the application of speeded up robust feature (SURF) extraction and then feature matching. Potential inliers are extracted from matched features by applying the M-estimator. Matched inlier points are used to form a homography matrix, the difference in the rotation angles of the finger in both the input and reference images is calculated, and finally, derotation is performed. Input fingerprint features are extracted and compared or stored based on the decision support system required for the situation.

Automatic White Balance of Digital Camera Based on Global Probability Distribution

2012 ◽  
Vol 433-440 ◽  
pp. 5443-5447 ◽  
Author(s):  
Hui Nan Guo ◽  
Jian Zhong Cao
Keyword(s):  
Probability Distribution ◽  
Color Image ◽  
Digital Camera ◽  
Light Sources ◽  
Digital Cameras ◽  
White Balance ◽  
Hsi Color Model ◽  
The Difference ◽  
True Colors ◽  
Automatic White Balance

The white balance is an important parameter of digital camera which makes a great impact on the application of digital cameras. However, due to the limitations of hardware of digital camera, the output image of digital camera cannot restore true colors of the objects under the different light sources conditions. And existing automatic white balance (AWB) algorithms have many application restrictions, particularly the single color image, the algorithms always failure to adjust. To solve this problem, this paper proposes an optimized algorithm based on the gray world assumption and HSI color model. According to the R, G and B color components probability distribution, the algorithm adjusts the image by using the difference value of color. Experimental results show that our algorithm can adjust images in complex situations; meanwhile these confirm that this method is not only effective, but also has the advantage of easy realization.

scholarly journals Improved Parallax Image Stitching Algorithm Based on Feature Block

Symmetry ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 348 ◽  
Author(s):  
Huaitao Shi ◽  
Lei Guo ◽  
Shuai Tan ◽  
Gang Li ◽  
Jie Sun
Keyword(s):  
Feature Matching ◽  
Computational Cost ◽  
Reference Image ◽  
Image Stitching ◽  
Feature Points ◽  
Shape Distortion ◽  
Scale Invariant ◽  
Point Matching ◽  
Feature Point Matching ◽  
Scale Invariant Feature

Image stitching aims at generating high-quality panoramas with the lowest computational cost. In this paper, we present an improved parallax image-stitching algorithm using feature blocks (PIFB), which achieves a more accurate alignment and faster calculation speed. First, each image is divided into feature blocks using an improved fuzzy C-Means (FCM) algorithm, and the characteristic descriptor of each feature block is extracted using scale invariant feature transform (SIFT). The feature matching block of the reference image and the target image are matched and then determined, and the image is pre-registered using the homography calculated by the feature points in the feature block. Finally, the overlapping area is optimized to avoid ghosting and shape distortion. The improved algorithm considering pre-blocking and block stitching effectively reduced the iterative process of feature point matching and homography calculation. More importantly, the problem that the calculated homography matrix was not global has been solved. Ghosting and shape warping are significantly eliminated by re-optimizing the overlap of the image. The performance of the proposed approach is demonstrated using several challenging cases.

The Study of Reduce the Mismatch Based on the SIFT Feature Matching

2012 ◽  
Vol 580 ◽  
pp. 378-382
Author(s):  
Xiao Yu Liu ◽  
Yan Piao ◽  
Lei Liu
Keyword(s):  
Image Matching ◽  
Feature Matching ◽  
Scale Invariant ◽  
Sift Algorithm ◽  
Invariant Feature ◽  
Space Rotation ◽  
Feature Transform ◽  
The Difference ◽  
Scale Invariant Feature ◽  
Keypoints Matching

The algorithm of SIFT (scale-invariant feature transform) feature matching is an international hotspot in the areas of the keypoints matching and target recognition at the present time. The algorithm is used in the image matching widely because of the good invariance of scale, illumination and space rotation .This paper proposes a new theory to reduce the mismatch—the theory to reduce the mismatch based on the main orientation of keypoints. This theory should firstly compute the grads of the main orientation of a couple of matched keypoints in the two images and the difference between them. Because the difference of the main orientation of matched keypoints should be much larger than the couples which are matched correctly, we can distinguish and reduce the mismatch through setting the proper threshold, and it can improve the accuracy of the SIFT algorithm greatly.

Molecular Views of Ice-Embedded Lumbricus Terrestris Erythrocruorin Obtained By Invariant Classification

1990 ◽  
Vol 48 (1) ◽  
pp. 450-451
Author(s):  
Michael schatz ◽  
Joachim Jäger ◽  
Marin van Heel
Keyword(s):  
Image Interpretation ◽  
Lumbricus Terrestris ◽  
Reference Image ◽  
Large Set ◽  
Multivariate Statistical ◽  
Data Set ◽  
Low Contrast ◽  
Negative Stain ◽  
Reference Images ◽  
Statistical Resolution

Lumbricus terrestris erythrocruorin is a giant oxygen-transporting macromolecule in the blood of the common earth worm (worm "hemoglobin"). In our current study, we use specimens (kindly provided by Drs W.E. Royer and W.A. Hendrickson) embedded in vitreous ice (1) to avoid artefacts encountered with the negative stain preparation technigue used in previous studies (2-4).Although the molecular structure is well preserved in vitreous ice, the low contrast and high noise level in the micrographs represent a serious problem in image interpretation. Moreover, the molecules can exhibit many different orientations relative to the object plane of the microscope in this type of preparation. Existing techniques of analysis requiring alignment of the molecular views relative to one or more reference images often thus yield unsatisfactory results.We use a new method in which first rotation-, translation- and mirror invariant functions (5) are derived from the large set of input images, which functions are subsequently classified automatically using multivariate statistical techniques (6). The different molecular views in the data set can therewith be found unbiasedly (5). Within each class, all images are aligned relative to that member of the class which contributes least to the classes′ internal variance (6). This reference image is thus the most typical member of the class. Finally the aligned images from each class are averaged resulting in molecular views with enhanced statistical resolution.

scholarly journals Optical Inspection Systems for Axisymmetric Parts with Spatial 2D Resolution

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1218
Author(s):  
Aleksandr Kulchitskiy
Keyword(s):  
Control System ◽  
Optical System ◽  
Measurement Accuracy ◽  
Experimental Studies ◽  
Digital Camera ◽  
Digital Cameras ◽  
Bodies Of Revolution ◽  
Optical Inspection ◽  
Inspection Systems ◽  
Projection Error

The article proposes a solution to the problem of increasing the accuracy of determining the main shaping dimensions of axisymmetric parts through a control system that implements the optical method of spatial resolution. The influence of the projection error of a passive optical system for controlling the geometric parameters of bodies of revolution from the image of its sections, obtained by a digital camera with non-telecentric optics, on the measurement accuracy is shown. Analytical dependencies are derived that describe the features of the transmission of measuring information of a system with non-telecentric optics in order to estimate the projection error. On the basis of the obtained dependences, a method for compensating the projection error of the systems for controlling the geometry of the main shaping surfaces of bodies of revolution has been developed, which makes it possible to increase the accuracy of determining dimensions when using digital cameras with a resolution of 5 megapixels or more, equipped with short-focus lenses. The possibility of implementing the proposed technique is confirmed by the results of experimental studies.

Medical Image Feature Matching Based on Wavelet Transform and SIFT Algorithm

2011 ◽  
Vol 65 ◽  
pp. 497-502
Author(s):  
Yan Wei Wang ◽  
Hui Li Yu
Keyword(s):  
Wavelet Transform ◽  
Wavelet Transforms ◽  
Medical Image ◽  
Feature Matching ◽  
Image Feature ◽  
Scale Invariant ◽  
Sift Algorithm ◽  
Matching Algorithm ◽  
Invariant Feature ◽  
Scale Invariant Feature

A feature matching algorithm based on wavelet transform and SIFT is proposed in this paper, Firstly, Biorthogonal wavelet transforms algorithm is used for medical image to delaminating, and restoration the processed image. Then the SIFT (Scale Invariant Feature Transform) applied in this paper to abstracting key point. Experimental results show that our algorithm compares favorably in high-compressive ratio, the rapid matching speed and low storage of the image, especially for the tilt and rotation conditions.

scholarly journals Research on Remote Sensing Image Matching with Special Texture Background

Symmetry ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1380
Author(s):  
Sen Wang ◽  
Xiaoming Sun ◽  
Pengfei Liu ◽  
Kaige Xu ◽  
Weifeng Zhang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Remote Sensing Image ◽  
Geometric Distortion ◽  
Reference Image ◽  
Remote Sensing Images ◽  
Scale Invariant ◽  
Sift Algorithm ◽  
Speeded Up Robust Features ◽  
Adaptive Quantization ◽  
Texture Background

The purpose of image registration is to find the symmetry between the reference image and the image to be registered. In order to improve the registration effect of unmanned aerial vehicle (UAV) remote sensing imagery with a special texture background, this paper proposes an improved scale-invariant feature transform (SIFT) algorithm by combining image color and exposure information based on adaptive quantization strategy (AQCE-SIFT). By using the color and exposure information of the image, this method can enhance the contrast between the textures of the image with a special texture background, which allows easier feature extraction. The algorithm descriptor was constructed through an adaptive quantization strategy, so that remote sensing images with large geometric distortion or affine changes have a higher correct matching rate during registration. The experimental results showed that the AQCE-SIFT algorithm proposed in this paper was more reasonable in the distribution of the extracted feature points compared with the traditional SIFT algorithm. In the case of 0 degree, 30 degree, and 60 degree image geometric distortion, when the remote sensing image had a texture scarcity region, the number of matching points increased by 21.3%, 45.5%, and 28.6%, respectively and the correct matching rate increased by 0%, 6.0%, and 52.4%, respectively. When the remote sensing image had a large number of similar repetitive regions of texture, the number of matching points increased by 30.4%, 30.9%, and −11.1%, respectively and the correct matching rate increased by 1.2%, 0.8%, and 20.8% respectively. When processing remote sensing images with special texture backgrounds, the AQCE-SIFT algorithm also has more advantages than the existing common algorithms such as color SIFT (CSIFT), gradient location and orientation histogram (GLOH), and speeded-up robust features (SURF) in searching for the symmetry of features between images.

scholarly journals Bionic Birdlike Imaging Using a Multi-Hyperuniform LED Array

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4084
Author(s):  
Xin-Yu Zhao ◽  
Li-Jing Li ◽  
Lei Cao ◽  
Ming-Jie Sun
Keyword(s):  
Imaging System ◽  
Color Image ◽  
Digital Camera ◽  
Frame Rate ◽  
Digital Cameras ◽  
Structured Illumination ◽  
Pixel Resolution ◽  
Led Array ◽  
Frequency Aliasing ◽  
Imaging Sensors

Digital cameras obtain color information of the scene using a chromatic filter, usually a Bayer filter, overlaid on a pixelated detector. However, the periodic arrangement of both the filter array and the detector array introduces frequency aliasing in sampling and color misregistration during demosaicking process which causes degradation of image quality. Inspired by the biological structure of the avian retinas, we developed a chromatic LED array which has a geometric arrangement of multi-hyperuniformity, which exhibits an irregularity on small-length scales but a quasi-uniformity on large scales, to suppress frequency aliasing and color misregistration in full color image retrieval. Experiments were performed with a single-pixel imaging system using the multi-hyperuniform chromatic LED array to provide structured illumination, and 208 fps frame rate was achieved at 32 × 32 pixel resolution. By comparing the experimental results with the images captured with a conventional digital camera, it has been demonstrated that the proposed imaging system forms images with less chromatic moiré patterns and color misregistration artifacts. The concept proposed verified here could provide insights for the design and the manufacturing of future bionic imaging sensors.

Designing a Color Filter with High Overall Transmittance for Improving the Color Accuracy of Digital Cameras

2021 ◽  
Vol 2021 (29) ◽  
pp. 1-6
Author(s):  
Yuteng Zhu ◽  
Graham D. Finlayson
Keyword(s):  
White Light ◽  
Digital Camera ◽  
Color Filter ◽  
Digital Cameras ◽  
Spectral Transmittance ◽  
Optimal Filters ◽  
Prior Art ◽  
Average Transmittance ◽  
Tristimulus Values ◽  
Correction Problem

Previously improved color accuracy of a given digital camera was achieved by carefully designing the spectral transmittance of a color filter to be placed in front of the camera. Specifically, the filter is designed in a way that the spectral sensitivities of the camera after filtering are approximately linearly related to the color matching functions (or tristimulus values) of the human visual system. To avoid filters that absorbed too much light, the optimization could incorporate a minimum per wavelength transmittance constraint. In this paper, we change the optimization so that the overall filter transmittance is bounded, i.e. we solve for the filter that (for a uniform white light) transmits (say) 50% of the light. Experiments demonstrate that these filters continue to solve the color correction problem (they make cameras much more colorimetric). Significantly, the optimal filters by restraining the average transmittance can deliver a further 10% improvement in terms of color accuracy compared to the prior art of bounding the low transmittance.

Part Monitoring and Quality Assessment of Conformal Additive Manufacturing Using Image Reconstruction

2018 ◽  
Author(s):  
Michael D. Kutzer ◽  
Levi D. DeVries ◽  
Cooper D. Blas
Keyword(s):  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Digital Camera ◽  
Image Data ◽  
Digital Cameras ◽  
Public And Private ◽  
The Public ◽  
Fused Deposition ◽  
Complex Part ◽  
Deposition Modeling

Additive manufacturing (AM) technologies have become almost universal in concept development, prototyping, and education. Advances in materials and methods continue to extend this technology to small batch and complex part manufacturing for the public and private sectors. Despite the growing popularity of digital cameras in AM systems, use of image data for part monitoring is largely unexplored. This paper presents a new method for estimating the 3D internal structure of fused deposition modeling (FDM) processes using image data from a single digital camera. Relative transformations are established using motion capture, and the 3D model is created using knowledge of the deposition path coupled with assumptions about the deposition cross-section. Results show that part geometry can be estimated and visualized using the methods presented in this work.

Sign in / Sign up

Export Citation Format

Share Document