scholarly journals Impact of Temperature-Dependent Heat Source/Sink and Variable Species Diffusivity on Radiative Reiner–Philippoff Fluid

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
T. Sajid ◽  
M. Sagheer ◽  
S. Hussain
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Mass Transfer ◽  
Heat Source ◽  
Transfer Rate ◽  
Variable Thermal Conductivity ◽  
Physical Parameters ◽  
Molecular Diffusivity ◽  
Source Sink ◽  
The Impact

The principle aim of the current communication is to scrutinize the impact of distinguished effects like variable thermal conductivity and variable molecular diffusivity on non-Newtonian Reiner–Philippoff fluid moving over a stretchable surface. The process of heat transfer is carried out in the presence of nonlinear thermal radiation, variable thermal conductivity, and heat generation/absorption. Furthermore, the study of mass transfer phenomena is carried out in the existence of variable molecular diffusivity. The PDEs regarding our model are renovated into ODEs by utilizing similarity transformation. Furthermore, the dimensionless model is tackled with the help of the RK4 method in conjunction with the shooting technique. The effects of different physical parameters that emerged during the numerical simulation on mass transfer rate, heat transfer rate, and velocity field are portrayed in the form of tables and graphs. It is noteworthy that an elevation in the heat source/sink parameters causes a reduction in the temperature profile. Moreover, a positive variation in the species diffusivity parameter augments the mass fraction field. A variation in the fluid parameter is found to be significantly affecting the shear thinning and shear thickening behaviour of the fluid. Reliability of the numerical outcomes is judged by comparing the obtained outcomes with the already available literature. The article is unique in its sense that the heat and mass transfer analysis of Reiner–Philippoff fluid under the aforementioned effects has not been investigated yet.

scholarly journals Scaling group analysis on MHD effects on heat transfer near a stagnation point on a linearly stretching sheet with variable viscosity and thermal conductivity, viscous dissipation and heat source/sink

2015 ◽  
Vol 42 (2) ◽  
pp. 111-133 ◽  
Author(s):  
Hunegnaw Dessie ◽  
Kishan Naikoti
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Differential Equations ◽  
Heat Source ◽  
Stagnation Point ◽  
Viscous Dissipation ◽  
Stretching Sheet ◽  
Variable Viscosity ◽  
Physical Parameters ◽  
Source Sink

The effects of variable viscosity and thermal conductivity on MHD heat transfer flow of viscous incompressible electrically conducting fluid near stagnation point flow on non-conducting stretching sheet in presence of uniform transfer magnetic field with heat source/sink and viscous dissipation has been analyzed. The governing partial differential equations are transformed into ordinary differential equations using a special form of Lie group transformations and then solved using Fourth order Runge-Kutta Method. Effects of different physical parameters on the flow and heat transfer characteristics are analyzed. Variations of different parameters on skin fiction coefficient-f??(0) and temperature gradient ???(0) are presented in tabular form.

scholarly journals Numerical simulation of variable thermal conductivity on 3D flow of nanofluid over a stretching sheet

2020 ◽  
Vol 9 (1) ◽  
pp. 233-243 ◽  
Author(s):  
Nainaru Tarakaramu ◽  
P.V. Satya Narayana ◽  
Bhumarapu Venkateswarlu
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Variable Thermal Conductivity ◽  
Normal Velocity ◽  
Transfer Coefficients ◽  
Similarity Transformations ◽  
Frictional Coefficients ◽  
The Impact

AbstractThe present investigation deals with the steady three-dimensional flow and heat transfer of nanofluids due to stretching sheet in the presence of magnetic field and heat source. Three types of water based nanoparticles namely, copper (Cu), aluminium oxide (Al2O3), and titanium dioxide (TiO2) are considered in this study. The temperature dependent variable thermal conductivity and thermal radiation has been introduced in the energy equation. Using suitable similarity transformations the dimensional non-linear expressions are converted into dimensionless system and are then solved numerically by Runge-Kutta-Fehlberg scheme along with well-known shooting technique. The impact of various flow parameters on axial and transverse velocities, temperature, surface frictional coefficients and rate of heat transfer coefficients are visualized both in qualitative and quantitative manners in the vicinity of stretching sheet. The results reviled that the temperature and velocity of the fluid rise with increasing values of variable thermal conductivity parameter. Also, the temperature and normal velocity of the fluid in case of Cu-water nanoparticles is more than that of Al2O3- water nanofluid. On the other hand, the axial velocity of the fluid in case of Al2O3- water nanofluid is more than that of TiO2nanoparticles. In addition, the current outcomes are matched with the previously published consequences and initiate to be a good contract as a limiting sense.

scholarly journals Simultaneous impacts of Joule heating and variable heat source/sink on MHD 3D flow of Carreau-nanoliquids with temperature dependent viscosity

2019 ◽  
Vol 8 (1) ◽  
pp. 356-367 ◽  
Author(s):  
J. V. Ramana Reddy ◽  
V. Sugunamma ◽  
N. Sandeep
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Joule Heating ◽  
Uniform Space ◽  
Weissenberg Number ◽  
Physical Parameters ◽  
Temperature Dependent ◽  
3D Flow ◽  
Temperature Dependent Viscosity ◽  
Source Sink

Abstract The 3D flow of non-Newtonian nanoliquid flows past a bidirectional stretching sheet with heat transfer is investigated in the present study. It is assumed that viscosity of the liquid varies with temperature. Carreau non-Newtonain model, Tiwari and Das nanofluid model are used to formulate the problem. The impacts of Joule heating, nonlinear radiation and non-uniform (space and temperature dependent) heat source/sink are accounted. Al-Cu-CH3OH and Cu-CH3OH are considered as nanoliquids for the present study. The solution of the problem is attained by the application of shooting and R.K. numerical procedures. Graphical and tabular illustrations are incorporated with a view of understanding the influence of various physical parameters on the flow field. We eyed that using of Al-Cu alloy nanoparticles in the carrier liquid leads to superior heat transfer ability instead of using only Aluminum nanoparticles. Weissenberg number and viscosity parameter have inclination to exalt the thermal field.

Effect of Thermophoresis and Brownian Moment on 2D MHD Nanofluid Flow over an Elongated Sheet

2017 ◽  
Vol 377 ◽  
pp. 111-126 ◽  
Author(s):  
C. Sulochana ◽  
G.P Ashwinkumar ◽  
Naramgari Sandeep
Keyword(s):  
Mass Transfer ◽  
Heat Source ◽  
Heat And Mass Transfer ◽  
Newtonian Fluid ◽  
Numerical Solutions ◽  
Frictional Heating ◽  
Mass Transfer Rate ◽  
Dual Nature ◽  
Source Sink ◽  
The Impact

In this study, we investigated the 2D MHD flow of a dissipative Maxwell nanofluid past an elongated sheet with uneven heat source/sink, Brownian moment and thermophoresis effects. The flow governing PDEs are transmuted into nonlinear ODEs adopting the suitable similarity transmissions. Further, the RK-4 technique is employed to acquire the numerical solutions. The impact of pertinent parameters such as thermal radiation, frictional heating, irregular heat source/sink, biot number, Brownian moment and thermophoresis on the flow quantities such as velocity, thermal and concentration fields likewise friction factor, heat and mass transfer rates are bestowed with the succour of graphs and tables. Dual nature is witnessed for Newtonian and non-Newtonian fluid cases. It is noticed that the heat and mass transfer rate in Newtonian fluid larger as compared with non-Newtonian fluid.

On Heat Transfer of a Two-Step Radiating Slab of Variable Thermal Conductivity

2020 ◽  
Vol 987 ◽  
pp. 137-141
Author(s):  
Ramoshweu Solomon Lebelo
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Chemical Reaction ◽  
Combustion Process ◽  
Variable Thermal Conductivity ◽  
Nonlinear Ordinary Differential Equation ◽  
Physical Parameters ◽  
Exothermic Chemical Reaction ◽  
Temperature Levels ◽  
Heat Transfers

An investigation of heat transfers in a combustible stockpile whose materials are of variable thermal conductivity is conducted in this article. The stockpile is modeled in rectangular slap and a two-step exothermic chemical reaction responsible for the combustion process is assumed. The reactive slab is also assumed to lose heat to the ambient by radiation. The Runge-Kutta Fehlberg (RKF45) method coupled with the Shooting technique is applied to tackle numerically the nonlinear ordinary differential equation (ODE) governing the problem. The process of heat transfer during combustion is made easy to understand by investigating effects of selected thermo-physical parameters on the system’s temperature. The results show that some thermo-physical parameters accelerate the exothermic chemical reaction and therefore raise the temperature levels, and that others help to reduce heat release rate to lower the temperature profiles. The graphs for the results are plotted and discussed accordingly.

Numerical analysis of magneto-natural convection and thermal radiation of SWCNT nanofluid inside T-inverted shaped corrugated cavity containing porous medium

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Dhia Massoudi ◽  
Mohamed Bechir Ben Hamida ◽  
Mohammed A. Almeshaal ◽  
Yahya Ali Rothan ◽  
Khalil Hajlaoui
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Heat Source ◽  
Free Convection ◽  
Thermal Radiation ◽  
Convection And Heat Transfer ◽  
Content Type ◽  
Uniform Heat ◽  
Source Sink ◽  
The Impact

Purpose The purpose of this paper is to examine numerically the magnetohydrodynamic (MHD) free convection and thermal radiation heat transfer of single walled carbon nanotubes-water nanofluid within T-inverted shaped corrugated cavity comprising porous media including uniform heat source/sink for solar energy power plants applications. Design/methodology/approach The two-dimensional numerical simulation is performed by drawing on Comsol Multiphysics program, based on the finite element process. Findings The important results obtained show that increasing numbers of Rayleigh and Darcy and the parameter of radiation enhance the flow of convection heat. Furthermore, by increasing the corrugation height, the convection flow increases, but it decreases with the multiplication of the corrugation height. The use of a flat cavity provides better output than a corrugated cavity. Originality/value The role of surface corrugation parameters on the efficiency of free convection and heat transfer of thermal radiation within the porous media containing the T-inverted corrugated cavity including uniform heat source/sink under the impact of Lorentz forces has never been explored. A contrast is also established between a flat cavity and a corrugated one.

Instability of Variable Thermal Conductivity Magnetohydrodynamic Nanofluid Flow in a Vertical Porous Channel of Varying Width

2017 ◽  
Vol 378 ◽  
pp. 85-101
Author(s):  
Md. Sarwar Alam ◽  
Oluwole Daniel Makinde ◽  
Md. Abdul Hakim Khan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Differential Equations ◽  
Entropy Generation ◽  
Fluid Velocity ◽  
Nonlinear Partial Differential Equations ◽  
Vertical Channel ◽  
Porous Wall ◽  
Variable Thermal Conductivity ◽  
Physical Parameters

A numerical investigation is performed into the heat transfer and entropy generation of a variable thermal conductivity magnetohydrodynamic flow of Al2O3-water nanofluid in a vertical channel of varying width with right porous wall, which enable the fluid to enter. The effects of the Lorentz force, buoyancy force, viscous dissipation and Joule heating are considered and modeled using the transverse momentum and energy balance equations respectively. The governing nonlinear partial differential equations are transformed into a system of coupled nonlinear ordinary differential equations using appropriate similarity transformations and then solved numerically using power series with Hermite-Padé approximation method. A stability analysis has been performed for the local rate of shear stress and Nusselt number that indicates the existence of dual solution branches. Numerical results are achieved for the fluid velocity, temperature as well as the rate of heat transfer at the wall and the entropy generation of the system. The present results are original and new for the flow and heat transfer past a channel of varying width in a nanofluid which shows that the physical parameters have significant effects on the flow field.

Sign in / Sign up

Export Citation Format

Share Document