scholarly journals Phase Change Material (PCM) Microcapsules for Thermal Energy Storage

2020 ◽  
Vol 2020 ◽  
pp. 1-20 ◽  
Author(s):  
Guangjian Peng ◽  
Guijing Dou ◽  
Yahao Hu ◽  
Yiheng Sun ◽  
Zhitong Chen
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Mechanical Performance ◽  
Energy Systems ◽  
Heat Transfer Area ◽  
Change Material

Phase change materials (PCMs) are gaining increasing attention and becoming popular in the thermal energy storage field. Microcapsules enhance thermal and mechanical performance of PCMs used in thermal energy storage by increasing the heat transfer area and preventing the leakage of melting materials. Nowadays, a large number of studies about PCM microcapsules have been published to elaborate their benefits in energy systems. In this paper, a comprehensive review has been carried out on PCM microcapsules for thermal energy storage. Five aspects have been discussed in this review: classification of PCMs, encapsulation shell materials, microencapsulation techniques, PCM microcapsules’ characterizations, and thermal applications. This review aims to help the researchers from various fields better understand PCM microcapsules and provide critical guidance for utilizing this technology for future thermal energy storage.

scholarly journals Enhancement of the Thermal Energy Storage Using Heat-Pipe-Assisted Phase Change Material

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6176 ◽  
Author(s):  
Hamidreza Behi ◽  
Mohammadreza Behi ◽  
Ali Ghanbarpour ◽  
Danial Karimi ◽  
Aryan Azad ◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Heat Pipe ◽  
Latent Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Liquid Fraction ◽  
Energy Storage Applications ◽  
Change Material

Usage of phase change materials’ (PCMs) latent heat has been investigated as a promising method for thermal energy storage applications. However, one of the most common disadvantages of using latent heat thermal energy storage (LHTES) is the low thermal conductivity of PCMs. This issue affects the rate of energy storage (charging/discharging) in PCMs. Many researchers have proposed different methods to cope with this problem in thermal energy storage. In this paper, a tubular heat pipe as a super heat conductor to increase the charging/discharging rate was investigated. The temperature of PCM, liquid fraction observations, and charging and discharging rates are reported. Heat pipe effectiveness was defined and used to quantify the relative performance of heat pipe-assisted PCM storage systems. Both experimental and numerical investigations were performed to determine the efficiency of the system in thermal storage enhancement. The proposed system in the charging/discharging process significantly improved the energy transfer between a water bath and the PCM in the working temperature range of 50 °C to 70 °C.

Dissipative particle dynamics study of nano-encapsulated thermal energy storage phase change material

RSC Advances ◽  
2014 ◽  
Vol 4 (74) ◽  
pp. 39552-39557 ◽  
Author(s):  
Zhonghao Rao ◽  
Xinyu You ◽  
Yutao Huo ◽  
Xinjian Liu
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Thermophysical Properties ◽  
Phase Change Materials ◽  
Dissipative Particle Dynamics ◽  
Particle Dynamics ◽  
Change Material

The nano-encapsulated phase change materials (PCM), which have several good thermophysical properties, were proposed as potential for thermal energy storage.

scholarly journals Designs of PCM based heat exchangers constructions for thermal energy storage tanks – examples and case study for selected design

2018 ◽  
Vol 70 ◽  
pp. 01010
Author(s):  
Marta Kuta ◽  
Dominika Matuszewska ◽  
Tadeusz Michał Wójcik
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
New Technologies ◽  
Tube Heat Exchanger ◽  
Change Material

Increasing energy consumption in residential and public buildings requires development of new technologies for thermal energy production and storage. One of possibilities for the second listed need is the use of phase change materials (PCMs). This work is focused on solutions in this area and consists of two parts. First one is focused on different designs of thermal energy storage (TES) tanks based on the phase change materials. The second part is the analysis of tests results for TES tank containing shelf and tube heat exchanger and filled with phase change material. Thermal energy storage tank is analyzed in order to use it in domestic heating and hot utility water installations. The aim of this research was to check the applicability of phase change material for mentioned purpose. Results show that using phase change materials for thermal energy storage can increase amount of stored heat. The use of properly selected PCM and heat exchanger enables the process of thermal energy storing and releasing to become more efficient.

scholarly journals A thermal energy storage composite by incorporating microencapsulated phase change material into wood

RSC Advances ◽  
2020 ◽  
Vol 10 (14) ◽  
pp. 8097-8103 ◽  
Author(s):  
Wenbin Wang ◽  
Huimin Cao ◽  
Jingyi Liu ◽  
Shifang Jia ◽  
Lin Ma ◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Microencapsulated Phase Change Material ◽  
Microencapsulated Phase Change Materials ◽  
The Matrix ◽  
Change Material

Phase change energy storage wood (PCESW) was prepared by using microencapsulated phase change materials (MicroPCM) as thermal energy storage (TES) materials and wood as the matrix.

Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage

2014 ◽  
Vol 7 (3) ◽  
pp. 1185-1192 ◽  
Author(s):  
Hengxing Ji ◽  
Daniel P. Sellan ◽  
Michael T. Pettes ◽  
Xianghua Kong ◽  
Junyi Ji ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Specific Heat ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Heat Of Fusion ◽  
Change Material ◽  
Enhanced Thermal Conductivity

Embedding continuous ultrathin-graphite foams (UGFs) with volume fractions as low as 0.8–1.2 vol% in a phase change material (PCM) can increase the effective thermal conductivity by up to 18 times, with negligible change in the melting temperature or mass specific heat of fusion.

scholarly journals PARAFFIN AS PHASE CHANGE MATERIAL FOR THERMAL ENERGY STORAGE, HEATING APPLICATION

2021 ◽  
Vol 25 (Special) ◽  
pp. 3-108-3-113
Author(s):  
Ghufran G. Shakassi ◽  
◽  
Nagam O. Kariem ◽  
Mohammed J. AliAlatabe ◽  
◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Focal Points ◽  
Flow Rates ◽  
Long Time ◽  
Discontinuous Nature ◽  
Change Material

Liberally accessible sun based vitality utilization for residential and mechanical applications are ruined since of its discontinuous nature. The thermal energy storage (TES) framework utilizing both sensible and inactive warm has numerous advantages like expansive warm capacity in a unit volume and its isothermal behavior amid the charging and releasing forms. Since of these focal points, in later a long time, a part of investigate work has been going on to overcome issues like moo warm exchange the rates between warm exchange liquid and stage alter fabric (PCM) in both charging and releasing forms of the PCM-based TES framework. In the present experimental investigation results of a combined sensible and latent heat TES system integrated with a varying (solar) heat source is presented. Investigations are carried out in the TES system for different phase change materials (paraffin) by varying HTF flow rates and for various paraffin mass (2, 4, and 6) kg. Experiments are performed charging processes. The results show that the 2 kg paraffin mass shows better performance compared to other paraffin mass.

Review on Phase Change Material Slurries

2013 ◽  
Vol 860-863 ◽  
pp. 946-951
Author(s):  
Jie Chen ◽  
Feng Jiao Liu ◽  
Yi Fei Zheng
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Apparent Specific Heat ◽  
Heat Transfer Capacity ◽  
Change Material ◽  
Better Than

Phase change materials (PCM) have recently received considerable attention in the field of thermal energy storage, due to their intrinsic properties. Phase change material slurry is a novel medium of heat storage and transfer, its apparent specific heat and heat transfer capacity is better than water.PCM slurries are being investigated for active thermal energy storage or as alternatives to conventional single phase fluids because they are pumpable and have advanced heat transport performance with phase change. This review mainly presents the information on PCM emulsions and microencapsulated PCM slurries (mPCM slurries).

Experimental Investigation on a PCM Based Thermal Energy Storage System for a VCR System

2021 ◽  
Vol 106 ◽  
pp. 116-120
Author(s):  
Shaik Riyaz Basha
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Cycle Time ◽  
Phase Change Materials ◽  
Storage Capacity ◽  
Food Storage ◽  
Change Material

Thermal energy storage (TES) based on hidden heat concept is good substitute for sensible heat storage because of its dense storage capacity and almost constant temperature heat transfers during the charging and discharging cycle. During no load and low cooling load conditions the system stores the thermal energy in the storage medium (phase change material) which will be used latter to meet the requirement in off cycle conditions. The intention of present work is to increase the system off cycle time, maintain required temperatures during power cuts by joining a few inch thick layer of phase change material on the outer surface of the evaporator. For investigation purpose a deep freezer which runs on vapor compression system of 50 liters storage capacity is fabricated with and without phase change materials. The eutectic compositions nearly 23 wt% salt (NaCl) dissolved in water and aluminium nitrate around 26 wt% dissolved in water are used as phase change materials. By the end of all experimental investigations it was noticed that the off cycle time system with phase change material is increased by 5.5 hours compared to system without phase change material, food storage time is enhanced by 8 to 14 hrs and a little power saving also achieved.

scholarly journals Cryogenic conditioning of microencapsulated phase change material for thermal energy storage

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
G. V. N. Trivedi ◽  
R. Parameshwaran
Keyword(s):  
Heat Treatment ◽  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Cryogenic Treatment ◽  
Treatment Processes ◽  
Change Material

Abstract Microencapsulation is a viable technique to protect and retain the properties of phase change materials (PCMs) that are used in thermal energy storage (TES) applications. In this study, an organic ester as a phase change material was microencapsulated using melamine–formaldehyde as the shell material. This microencapsulated PCM (MPCM) was examined with cyclic cryogenic treatment and combined cyclic cryogenic heat treatment processes. The surface morphology studies showed that the shell surfaces had no distortions or roughness after cryogenic treatment. The cryogenically conditioned microcapsules exhibited diffraction peak intensity shifts and crystal structure changes. The onset of melting for the nonconditioned and conditioned microcapsules were measured to be 8.56–9.56 °C, respectively. Furthermore, after undergoing the cryogenic and heat treatment processes, the PCM microcapsules had appreciable latent heat capacities of 39.8 kJ/kg and 60.7 kJ/kg, respectively. Additionally, the microcapsules were found to have good chemical stability after the cryogenic treatment. In addition, the cryogenically conditioned microcapsules were found to be thermally stable up to 128.9 °C, whereas the nonconditioned microcapsules were stable up to 101.9 °C. Based on the test results, it is obvious that the cryogenically conditioned microcapsules exhibited good thermal properties and are very desirable for cool thermal energy storage applications.

Sign in / Sign up

Export Citation Format

Share Document