scholarly journals Multiple Sound Source Localization and Counting Using One Pair of Microphones in Noisy and Reverberant Environments

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Yuzhuo Fang ◽  
Zhiyong Xu
Keyword(s):  
Source Localization ◽  
Sound Source ◽  
Matching Pursuit ◽  
Signal To Noise Ratio ◽  
Angular Spectrum ◽  
Sound Source Localization ◽  
Signal To Noise ◽  
Time Frequency ◽  
Reverberant Environments ◽  
Noise Ratio

A multiple sound source localization and counting method based on an angular spectrum is proposed in this paper. Local signal-to-noise ratio tracking, onset detection, and a coherence test are introduced to filter the generalized cross-correlation angular spectrum in the time-frequency domain for multiple sound source localization and counting in noisy and reverberant environments. Then, dual-width matching pursuit is introduced to replace peak search as the method of localization and counting. A comprehensive comparison of two statistical indicators, mean precision and mean absolute estimated error, indicates that the proposed localization and counting algorithm using both the filtered angular spectrum and dual-width matching pursuit method is more robust and accurate than the classic counterpart, especially in environments with low signal-to-noise ratio, strong reverberation, and abundant sound sources.

scholarly journals Towards Robust Multiple Blind Source Localization Using Source Separation and Beamforming

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 532
Author(s):  
Henglin Pu ◽  
Chao Cai ◽  
Menglan Hu ◽  
Tianping Deng ◽  
Rong Zheng ◽  
...  
Keyword(s):  
Source Localization ◽  
Sound Source ◽  
Indoor Localization ◽  
Weighting Function ◽  
Signal To Noise Ratio ◽  
Source Separation ◽  
Sound Source Localization ◽  
Angle Of Arrival ◽  
Sound Sources ◽  
Localization Algorithms

Multiple blind sound source localization is the key technology for a myriad of applications such as robotic navigation and indoor localization. However, existing solutions can only locate a few sound sources simultaneously due to the limitation imposed by the number of microphones in an array. To this end, this paper proposes a novel multiple blind sound source localization algorithms using Source seParation and BeamForming (SPBF). Our algorithm overcomes the limitations of existing solutions and can locate more blind sources than the number of microphones in an array. Specifically, we propose a novel microphone layout, enabling salient multiple source separation while still preserving their arrival time information. After then, we perform source localization via beamforming using each demixed source. Such a design allows minimizing mutual interference from different sound sources, thereby enabling finer AoA estimation. To further enhance localization performance, we design a new spectral weighting function that can enhance the signal-to-noise-ratio, allowing a relatively narrow beam and thus finer angle of arrival estimation. Simulation experiments under typical indoor situations demonstrate a maximum of only 4∘ even under up to 14 sources.

Importance of time-frequency units for sentence recognition as a function of signal-to-noise ratio

2018 ◽  
Vol 143 (3) ◽  
pp. 1751-1751 ◽  
Author(s):  
Frederic Apoux ◽  
Brittney Carter ◽  
Karl P. Velik ◽  
Eric Healy
Keyword(s):  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Time Frequency ◽  
Sentence Recognition ◽  
Noise Ratio

Random denoising and signal nonlinearity approach by time-frequency peak filtering using weighted frequency reassignment

Geophysics ◽  
2013 ◽  
Vol 78 (6) ◽  
pp. V229-V237 ◽  
Author(s):  
Hongbo Lin ◽  
Yue Li ◽  
Baojun Yang ◽  
Haitao Ma
Keyword(s):  
Weight Function ◽  
Instantaneous Frequency ◽  
Seismic Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Signal To Noise ◽  
Transform Method ◽  
Time Frequency ◽  
Frequency Peak ◽  
Noise Ratio

Time-frequency peak filtering (TFPF) may efficiently suppress random noise and hence improve the signal-to-noise ratio. However, the errors are not always satisfactory when applying the TFPF to fast-varying seismic signals. We begin with an error analysis for the TFPF by using the spread factor of the phase and cumulants of noise. This analysis shows that the nonlinear signal component and non-Gaussian random noise lead to the deviation of the pseudo-Wigner-Ville distribution (PWVD) peaks from the instantaneous frequency. The deviation introduces the signal distortion and random oscillations in the result of the TFPF. We propose a weighted reassigned smoothed PWVD with less deviation than PWVD. The proposed method adopts a frequency window to smooth away the residual oscillations in the PWVD, and incorporates a weight function in the reassignment which sharpens the time-frequency distribution for reducing the deviation. Because the weight function is determined by the lateral coherence of seismic data, the smoothed PWVD is assigned to the accurate instantaneous frequency for desired signal components by weighted frequency reassignment. As a result, the TFPF based on the weighted reassigned PWVD (TFPF_WR) can be more effective in suppressing random noise and preserving signal as compared with the TFPF using the PWVD. We test the proposed method on synthetic and field seismic data, and compare it with a wavelet-transform method and [Formula: see text] prediction filter. The results show that the proposed method provides better performance over the other methods in signal preserving under low signal-to-noise ratio.

Threshold Noise Reduction Research of Improved EEMD Method

2012 ◽  
Vol 226-228 ◽  
pp. 237-240 ◽  
Author(s):  
Mei Jun Zhang ◽  
Hao Chen ◽  
Chuang Wang ◽  
Qing Cao
Keyword(s):  
Noise Reduction ◽  
Signal To Noise Ratio ◽  
Frequency Noise ◽  
Signal To Noise ◽  
Time Frequency ◽  
Noise Ratio ◽  
Reduction Effect ◽  
Eemd Method ◽  
Simulation Signal ◽  
Improved Eemd

In order to extract effectively detection signals in the noise background for non-stationary signal.On the basis of EEMD, improved EEMD is put forward, the improve EEMD threshold noise reduction is researched in this paper.The simulation signal compared the noise reduction effect of the wavelet,EMD,EEMD,and the improved EEMD. The improved EEMD threshold noise reduction have the best noise reduction result , the highest signal-to-noise ratio, the smallest standard deviation error.After the improved EEMD threshold noise reduction , the measurement signal time domain waveform smooth. More high frequency noise was obviously reduced in Hilbert time- frequency spectrum. Signal-to-noise ratio significantly improve, and signal characteristics are very clear.

Dual-Tree Wavelet Packet Transform for Ultrasonic Data Transmission Through Metal Structures

2015 ◽  
Author(s):  
Jinjiang Wang ◽  
Robert X. Gao ◽  
Xinyao Tang ◽  
Zhaoyan Fan ◽  
Peng Wang
Keyword(s):  
Signal Processing ◽  
Data Transmission ◽  
Signal To Noise Ratio ◽  
Wavelet Packet ◽  
Experimental Studies ◽  
Wavelet Packet Transform ◽  
Signal To Noise ◽  
Metallic Structures ◽  
Time Frequency ◽  
Noise Ratio

Data communication through metallic structures is generally encountered in manufacturing equipment and process monitoring and control. This paper presents a signal processing technique for enhancing the signal-to-noise ratio and high-bit data transmission rate in ultrasound-based wireless data transmission through metallic structures. A multi-carrier coded-ultrasonic wave modulation scheme is firstly investigated to achieve high-bit data rate communication while reducing inter-symbol inference and data loss, due to the inherent signal attenuation, wave diffraction and reflection in metallic structures. To improve the signal-to-noise ratio, dual-tree wavelet packet transform (DT-WPT) has been investigated to separate multi-carrier signals under noise contamination, given its properties of shift-invariance and flexible time frequency partitioning. A new envelope extraction and threshold setting strategy for selected wavelet coefficients is then introduced to retrieve the coded digital information. Experimental studies are performed to evaluate the effectiveness of the developed signal processing method for manufacturing.

Sign in / Sign up

Export Citation Format

Share Document