scholarly journals Failure Mechanism and Stability Control of Surrounding Rock of Docking Roadway under Multiple Dynamic Pressures in Extrathick Coal Seam

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Xiangye Wu ◽  
Shuai Wang ◽  
Chen Tian ◽  
Changxing Ji ◽  
Jingya Wang
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Vertical Direction ◽  
Coordinated Control ◽  
Stability Control ◽  
Surrounding Rock ◽  
Anchor Cable ◽  
Rock Stability ◽  
Working Face ◽  
Control Scheme

In view of multiseam mining under goaf, the surrounding rock control problem of lower coal roadway will be affected by concentrated coal pillar left in upper coal seam goaf and dynamic pressure superposition of working face in this coal seam. Under the geological environment of No. 16 extrathick coal seam in the Laoshidan coal mine and taking the working face 031604 as the research background, the reasonable docking position selection of the withdrawal roadway and the docking roadway in the middle mining period and the surrounding rock stability control problems of the withdrawal roadway and the docking roadway during the final mining period were studied by using the methods of field theoretical analysis, numerical simulation, and field measurement. The mechanical mechanism of the nonuniform failure of the retreating roadway and the docking roadway during the final mining period is shown, and the control method of the surrounding rock stability of the roadway is put forward and applied. The results show that (1) through the analysis of the superimposed stress under the concentrated coal pillar and the coal seam in advance, the specific butt joint position is arranged at 860 m away from the open-off cut, which is 10 m away from the goaf of No. 12 coal seam. (2) With the working face 031604 advancing through the process, the deviatoric stress value of the withdrawal roadway gradually increases, the maximum principal stress of the two sides of the roadway deflects clockwise from the vertical direction to the horizontal direction, its angle also gradually increases, and the shape of the plastic zone gradually expands from symmetry to asymmetry. (3) It is revealed that the peak value of deviatoric stress on both sides of the docking position of docking roadway increases gradually under the influence of mining and deflects anticlockwise to the vertical direction with the principal stress angle. The joint action of both is the mechanical mechanism that causes the plastic zone to expand in an asymmetric shape. (4) The coordinated control scheme of support (anchor bolt and anchor cable)—modified (grouting)—is adopted for the withdrawal roadway, and the coordinated control scheme of support (anchor bolt and anchor cable)—changing the cross-section shape of the roadway—is adopted for the docking roadway. The purpose of the smooth connection of working face and rapid and safe withdrawal of equipment is achieved on site.

scholarly journals Deviatoric Stress Evolution Laws and Control in Surrounding Rock of Soft Coal and Soft Roof Roadway under Intense Mining Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Dongdong Chen ◽  
Chunwei Ji ◽  
Shengrong Xie ◽  
En Wang ◽  
Fulian He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Plastic Zone ◽  
Theoretical Calculations ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Anchor Cable ◽  
Soft Coal ◽  
Working Face ◽  
Failure Line

Aiming at the problem of large deformation and instability failure and its control of soft coal and soft roof roadway under intense mining, laboratory experiments, theoretical calculations, Flac3D numerical simulation, borehole peeping, and pressure observation were used to study the deflection characteristics of the deviatoric stress of the gas tailgate and the distribution and failure characteristics of the plastic zone in the mining face considering the strain softening characteristics of the roof and coal of roadway, and then the truss anchor cable-control technology is proposed. The results show the following: (1) The intense mining influence on the working face will deflect the peak deviatoric stress zone (PDSZ) of the surrounding rock of the gas tailgate. The influence distance of PDSZ is about 20 m in advance and 60 m in lag; the PDSZ at the gob side of the roadway is located in the range of 3–5.5 m from the surface of the coal pillar, while the coal wall side is mainly located in the range of 3–4.5 m at the shoulder corner and bottom corner of the solid coal. (2) The intense mining in the working face caused the nonuniform expansion of the surrounding rock plastic area of the gas tailgate. The two shoulder angles of the roadway and the bottom of the coal pillar have the largest damage range, and the maximum damage location is the side angle of the coal pillar (5 m). Angle and bottom angle of coal pillar are the key points of support control. (3) The plastic failure line of the surrounding rock of the gas tailgate is always between the inner and outer contours of the PDSZ, and the rock mass in the PDSZ is in a stable and unstable transition state, so the range of anchor cable support should be cross plastic failure line. (4) The theoretical calculations and numerical simulation results agree well with the drilling peep results. Based on the deflection law of the PDSZ and the expansion characteristics of the plastic zone, a truss anchor cable supporting system with integrated locking and large-scale support function is proposed to jointly control the roof and the two sides, which effectively solves the problem of weak surrounding rock roadway under severe mining deformation control problems realizing safety and efficient production in coal mines under intense mining.

Study on the Terminal Line Reasonable Position of Two Coal Seam under the Down-Protective Layer Pressure-Relieved Mining

2013 ◽  
Vol 295-298 ◽  
pp. 2913-2917
Author(s):  
Xiang Yang Zhang ◽  
Min Tu
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Protective Layer ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Rock Properties ◽  
Engineering Practice ◽  
Working Face ◽  
Roadway Deformation ◽  
The Impact

In order to study the stress distribution and its dynamic influence law while the protective layer mining, based on the transfer law of mining-induced stress in the coal seam floor and in front of the working face, using numerical simulation software to simulate the surrounding rock stress under the different pillar width mining conditions, and carried through the roadway deformation engineering practice observations. It is shown that reserved 110m coal pillar could weaken the impact on the front of the floor tunnel under the protective layer mining process. When the top liberated layer mining to reduce the impact of mining stress superposition, it should avoid the terminal lines on the two coal seams at the same location and may be staggered at least about 30m ~ 50m. And it obtained that the roadway deformation not only by mining impact, but also considering the geological environment surrounding rock conditions, tunnel position in which layers of rock, rock properties and other factors. The research guided the engineering practice successfully.

Numerical Simulation Study on Setting Stopping Line of Working Face in Shuguang Mine

2014 ◽  
Vol 580-583 ◽  
pp. 2554-2557
Author(s):  
Hua Jun Xue ◽  
Jun Chen ◽  
Bo Liu ◽  
Jie Kong ◽  
Zhi Jun Hao
Keyword(s):  
Numerical Simulation ◽  
Recovery Rate ◽  
Coal Pillar ◽  
Economic Benefits ◽  
Surrounding Rock ◽  
Long Term Stability ◽  
Rock Stability ◽  
Working Face ◽  
Stopping Line

The surrounding rock deformation of pedestrian roadway was serious under the influence of the working face. And it has affected the safety and normal use of roadway. To ensure the long-term stability of the pedestrian roadway surrounding rock and increase the coal recovery rate of working face, the paper studied the position of stopping line of 1203 working face by numerical simulation. The results show that setting 115m wide of security coal pillar between 1203 working face and pedestrian roadway that the area of stress concentration near the working face has less effect on the pedestrian roadway could better control the surrounding rock stability of the pedestrian roadway and meet the need of the long-term normal production use. It narrows the width of security coal pillar, increase the coal resources recovery rate and achieve the better economic benefits.

scholarly journals Stability of "Support-Surrounding Rock" System for Fully Mechanized Longwall Mining in Steeply Dipping Coal Seams

2021 ◽  
Author(s):  
Luo Shenghu ◽  
tong wang ◽  
Wu Yongping ◽  
Huangfu Jingyu ◽  
Zhao Huatao
Keyword(s):  
Coal Seam ◽  
Longwall Mining ◽  
Stability Control ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Physical Test ◽  
Rock System ◽  
Working Face ◽  
The Stability ◽  
Mining Height

Abstract The key to the safe and efficient longwall mining of steeply dipping seams lies in the stability control of the "support-surrounding rock" system. This paper analyzes the difficulty of controlling the stability of the support during the longwall mining process of steeply dipping coal seams in terms of the characteristics of the non-uniform filled-in gob using a combination of physical test, theoretical analysis and field measurements. Considering the floor as an elastic foundation, we built a "support-surrounding rock" mechanical model based on data obtained on "support-surrounding rock" systems in different regions and the laws of support motion under different load conditions. Our findings are summarized as follows. First, depending on the angle of the coal seam, the caving gangue will roll (slide) downward along the incline, resulting in the formation of a non-uniform filling zone in the deep gob in which the lower, middle, and upper sections are filled, half-filled, and empty, respectively. In addition, an inverted triangular hollow surface is formed on the floor of the gob in the middle and upper sections behind the support. Furthermore, as the angle of the coal seam, length of the working face, and mining height increase, the characteristics of the non-uniform filled-in gob are enhanced. Second, we found that, as a result of support by the gangue, the "support-surrounding rock" system is relatively stable in the lower part of the working face while, in the middle and upper sections of the working face, the contact method and loading characteristics of the support are more complicated, making stability control difficult. Third, the magnitude and direction of the load, action point, and mining height all affect the stability of the support to varying degrees, with the tangential load and action position of the roof load having the most significant impacts on the stability of the support. Under loading by the roof, rotation and subsidence of the support inevitably occur, with gradually increasing amplitude and effects on the inter-support and sliding forces. Finally, we found that it is advisable in the process of moving the support to adopt "sliding advance of support" measures and to apply a "down-up" removal order to ensure overall stability. These research results provide reference and guidance of significance to field practice production.

scholarly journals Stability Analysis of Roadway Groups under Multi-Mining Disturbances

2021 ◽  
Vol 11 (17) ◽  
pp. 7953
Author(s):  
Yuantian Sun ◽  
Ruiyang Bi ◽  
Qingliang Chang ◽  
Reza Taherdangkoo ◽  
Junfei Zhang ◽  
...  
Keyword(s):  
Coal Mining ◽  
Coal Pillar ◽  
Stability Control ◽  
Surrounding Rock ◽  
Key Strata ◽  
Working Face ◽  
Roadway Stability ◽  
Mining Disturbance ◽  
Mining Face ◽  
The Stability

The roadway stability has been regarded as the main challenging issue for safety and productivity of deep underground coal mines, particularly where roadways are affected by coal mining activities. This study investigates the −740 m main roadway in the Jining No. 2 Coal Mine to provide a theoretical basis for the stability control of the main deep roadway affected by disturbances of adjacent working activities. Field surveys, theoretical analyses, and numerical simulations are used to reveal mechanisms of the coal mining disturbance. The field survey shows that the deformation of roadway increases when the work face advances near the roadway group. Long working face mining causes the key strata to collapse based on the key strata theory and then disturbs the adjacent roadway group. When the working face is 100 m away from the stop-mining line, the roadway group is affected by the mining face, and the width roadway protection coal pillar is determined to be about 100 m. Flac3D simulations prove the accuracy of the theoretical result. Through reinforcement and support measures for the main roadway, the overall strength of the surrounding rock is enhanced, the stability of the surrounding rock of the roadway is guaranteed, and the safe production of the mine is maintained.

scholarly journals Gob-Side Entry Retained with Soft Roof, Floor, and Seam in Thin Coal Seams: A Case Study

2020 ◽  
Vol 12 (3) ◽  
pp. 1197 ◽  
Author(s):  
Zhijun Tian ◽  
Zizheng Zhang ◽  
Min Deng ◽  
Shuai Yan ◽  
Jianbiao Bai
Keyword(s):  
Mining Industry ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Mine Pressure ◽  
Coal Seams ◽  
Rock Stability ◽  
Working Face ◽  
Geological Conditions ◽  
Surrounding Rock Control

Gob-side entry retained technology is of great significance to develop coal mining industry sustainably, which can improve the coal recovery rate by mining without the coal pillar. However, scholars and researchers pay little attention to the gob-side entry retained with soft roof, floor, and seam in thin coal seams. In this study, the difficulties and key points of surrounding rock control for gob-side entry retained with soft roof, floor, and seam in thin coal seams were firstly proposed. Secondly, the mechanical model of the interaction between the roadside backfill body and the roof for gob-side entry retained with soft roof, floor, and seam in thin coal seams was established, and the relevant parameters were designed. Finally, the above results were verified by the engineering practice of gob-side entry retained technology and the monitoring of mine pressure on the 1103 working face of the Heilong Coal Mine. Moreover, the effect factors of surrounding rock stability for gob-side entry retained with soft roof, floor, and seam in thin coal seams were discussed using the discrete element method. The results could provide guidance for gob-side entry retained with soft roof, floor, and seam in thin coal seams under similar geological conditions.

scholarly journals Stabilization of Rock Roadway under Obliquely Straddle Working Face

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5759
Author(s):  
Peng Wang ◽  
Nong Zhang ◽  
Jiaguang Kan ◽  
Bin Wang ◽  
Xingliang Xu
Keyword(s):  
Dynamic Pressure ◽  
Stability Control ◽  
Surrounding Rock ◽  
Horizontal Distance ◽  
Floor Rock ◽  
Rock Stability ◽  
Ground Pressure ◽  
Working Face ◽  
Rock Roadway

A floor rock roadway under an oblique straddle working face is a typical dynamic pressure roadway. Under the complex disturbance of excavation engineering works, the roadway often undergoes stress concentration and severe deformation and damage. To solve the problem of surrounding rock stability control for this roadway type, this study considered the East Forth main transport roadway in the floor strata of the 1762(3) working face of the Pansan coal mine. In situ ground pressure monitoring and numerical simulation calculation using the FLAC2D software were carried out. The influence laws of the surrounding rock lithology, the vertical and horizontal distance between the roadway and overlying working face, the positional relationship between the roadway and the overlying working face, and the support form and strength of the rock surrounding an oblique straddle roadway were obtained. Within the range of mining influence, the properties of the rock surrounding the roof and floor were very different, and the deformation of the rock surrounding the two sides exhibited regional difference. The influence range of the mining working face on the rock floor of the roadway was approximately 30–40 m, and that of horizontal mining was approximately 50–60 m. The mining influence on the rock surrounding the side roadway of the working face is large, but the mining influence on the roadway below is small. Using FLAC2D, the stress and displacement characteristics of the rock surrounding the obliquely straddle roadway were compared and analyzed when the bolt support, combined bolt and shed support, and bolt–shotcreting–grouting support were adopted, the proposed support scheme of bolting and shotcreting was successfully applied. The deformation of the rock surrounding the roadway was satisfactorily controlled, and the results were useful as a reference for similar roadway maintenance projects.

Surrounding Rock Stability Control of Auxiliary Return Airway in High-Stress Working Face

2016 ◽  
Vol 13 (9) ◽  
pp. 6196-6202
Author(s):  
Kai Wang ◽  
Junmeng Li ◽  
Wenyue Qi ◽  
Guoqiang Kong ◽  
Tianqi Song
Keyword(s):  
High Stress ◽  
Stability Control ◽  
Surrounding Rock ◽  
Rock Stability ◽  
Working Face

scholarly journals Comprehensive technical support for safe mining in ultra-close coal seams: A case study

2021 ◽  
pp. 014459872110093
Author(s):  
Wei Zhang ◽  
Jiawei Guo ◽  
Kaidi Xie ◽  
Jinming Wang ◽  
Liang Chen ◽  
...  
Keyword(s):  
Coal Seam ◽  
Technical Support ◽  
Surrounding Rock ◽  
Coal Seams ◽  
Deformation Control ◽  
Hard Roof ◽  
Working Face ◽  
Close Coal Seams ◽  
Safe Mining

In order to mine the coal seam under super-thick hard roof, improve the utilization rate of resources and prolong the remaining service life of the mine, a case study of the Gaozhuang Coal Mine in the Zaozhuang Mining Area has been performed in this paper. Based on the specific mining geological conditions of ultra-close coal seams (#3up and #3low coal seams), their joint systematic analysis has been performed, with the focus made in the following three aspects: (i) prevention of rock burst under super-thick hard roof, (ii) deformation control of surrounding rock of roadways in the lower coal seam, and (iii) fire prevention in the goaf of working face. Given the strong bursting tendency observed in upper coal seam and lower coal seam, the technology of preventing rock burst under super-thick hard roof was proposed, which involved setting of narrow section coal pillars to protect roadways and interleaving layout of working faces. The specific supporting scheme of surrounding rock of roadways in the #3low1101 working face was determined, and the grouting reinforcement method of local fractured zones through Marithan was further proposed, to ensure the deformation control of surrounding rock of roadways in lower coal seams. The proposed fire prevention technology envisaged goaf grouting and spraying to plug leaks, which reduced the hazard of spontaneous combustion of residual coals in mined ultra-close coal seams. The technical and economic improvements with a direct economic benefit of 5.55 million yuan were achieved by the application of the proposed comprehensive technical support. The research results obtained provide a theoretical guidance and technical support of safe mining strategies of close coal seams in other mining areas.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

Sign in / Sign up

Export Citation Format

Share Document