scholarly journals Study on the Large Deformation Characteristics and Disaster Mechanism of a Thin-Layer Soft-Rock Tunnel

2020 ◽  
Vol 2020 ◽  
pp. 1-15 ◽  
Author(s):  
Xiulian Zhang ◽  
Manchao He ◽  
Fengnian Wang ◽  
Gan Li ◽  
Shengxin Xu ◽  
...  
Keyword(s):  
Thin Layer ◽  
Water Absorption ◽  
Large Deformation ◽  
Soft Rock ◽  
Surrounding Rock ◽  
Left Shoulder ◽  
Deformation And Failure ◽  
Maximum Deformation ◽  
Factors Influencing ◽  
Main Factors

In view of the large deformation of thin-layer soft rock in the No. 2 inclined shaft of the Muzhailing Tunnel, we performed an experimental investigation on the mineral composition, physical characteristics, and uniaxial compressive strength of the surrounding rock of the tunnel. The characteristics of the large deformation of the surrounding rock of the tunnel were analyzed, and the main factors influencing the deformation of the tunnel were revealed. The influence of various factors on the large deformation of the surrounding rock was analyzed using the 3DEC-Trigon discrete element numerical simulation method. The results show that (1) the deformation of the surrounding rock of the tunnel has remarkable asymmetry, the deformation of the initial support of the tunnel is significant, and the buried depth of the area where the maximum deformation of the tunnel exceeded 1 m is greater than 500 m; (2) the main factors influencing the deformation of a thin-layer slate tunnel include joint inclination, buried depth, water absorption, and softening of the surrounding rock; and (3) the maximum deformation of the surrounding rock is observed for a joint angle of 45°, at which the buried depth is directly proportional to the deformation and failure of the tunnel. Furthermore, after the surrounding rock was softened by water absorption, the floor of the tunnel, the left shoulder socket, and the right side of the tunnel are deformed greatly. The results of this study will provide a theoretical basis for the study of similar deformation control methods and supporting measures for tunnels excavated in thin-layer soft rock.

The Use of Sol-Gel Method for Obtaining Fire-Resistant Elastic Coatings on Cotton Fabrics

2021 ◽  
Vol 1038 ◽  
pp. 468-479
Author(s):  
Olga Skorodumova ◽  
Olena Tarakhno ◽  
Olena Chebotaryova ◽  
Oleg Bezuglov ◽  
Fatih Mehmet Emen
Keyword(s):  
Thin Layer ◽  
Fire Protection ◽  
Sol Gel ◽  
Fire Retardant ◽  
Cotton Fabrics ◽  
Covalent Bonds ◽  
Silica Coatings ◽  
Factors Influencing ◽  
Fire Retardant Properties ◽  
Main Factors

Based on the generalization of research results on the processes of obtaining SiO2 sols using tetraethoxysilane and ethyl silicates, the main factors influencing the elasticity of silica coatings on cotton fabrics and their fire-retardant properties are considered. The possibility of forming covalent bonds between the functional groups of cellulose, gel coating and flame retardant layer is considered, which explains the strong fixation of a thin layer of coating on the fibers of the fabric and improve its fire protection. The use of the developed compositions for fire-retardant elastic coatings based on ethyl silicate allows to increase the time of complete burning of cotton from 30s (untreated fabric) to 600s (treated with binary coating).

scholarly journals Research on Deformation Mechanisms of a High Geostress Soft Rock Roadway and Double-Shell Grouting Technology

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Fengnian Wang ◽  
Shizhuang Chen ◽  
Pan Gao ◽  
Zhibiao Guo ◽  
Zhigang Tao
Keyword(s):  
Mechanical Properties ◽  
Rock Mass ◽  
Large Deformation ◽  
Coal Mine ◽  
Soft Rock ◽  
In Situ Stress ◽  
Deformation Monitoring ◽  
Deformation And Failure ◽  
Working Face ◽  
High Geostress

In this study, the deformation characteristics and mechanical properties of coal and rock mass in the S2N5 working face of the Xiaokang coal mine are analyzed to address the problem of large deformation of soft rocks with high in situ stress surrounding roadways. Through a newly developed grouting pipe, a double-shell grouting technology, consisting of low-pressure grouting and high-pressure split grouting, is proposed for the Xiaokang coal mine. In addition, the effect of grouting is evaluated by borehole peeping and deformation monitoring. The results show that the double-shell grouting technology can effectively improve the overall mechanical properties of the surrounding coal and rock mass, preventing the large deformation and failure of the roadway. This technology can be useful when analyzing and preventing large deformation of soft rock roadways.

scholarly journals Application of Constant Resistance and Large Deformation Anchor Cable in Soft Rock Highway Tunnel

2019 ◽  
Vol 2019 ◽  
pp. 1-19 ◽  
Author(s):  
Xiaoming Sun ◽  
Bo Zhang ◽  
Li Gan ◽  
Zhigang Tao ◽  
Chengwei Zhao
Keyword(s):  
Large Deformation ◽  
Support System ◽  
Field Tests ◽  
Soft Rock ◽  
Internal Force ◽  
Surrounding Rock ◽  
Gansu Province ◽  
Tunnel Engineering ◽  
Anchor Cable ◽  
Constant Resistance

Muzhailing Highway Extra-long Tunnel in Lanzhou, Gansu Province, China, belongs to the soft rock tunnel in the extremely high geostress area. During the construction process, large deformation of the soft rock occurred frequently. Taking the no. 2 inclined shaft of Muzhailing tunnel as the research object, an NPR (negative Poisson’s ratio) constant resistance and large deformation anchor cable support system based on high prestress force, constant resistance, and releasing surrounding rock pressure was proposed. The characteristics of the surrounding rock under the steel arch support and NPR anchor cable support were compared and analyzed by using 3DEC software. A series of field tests were conducted in the no. 2 inclined shaft, and the rock strength, displacement of the surrounding rock, deep displacement of the surrounding rock, internal force of steel arch, and axial force of anchor cable were measured to study the application effect of the NPR anchor cable support system in tunnel engineering. Moreover, the 3DEC numerical simulation results were compared with the field test results. The research results show that the application of NPR constant resistance and large deformation anchor cable support system in tunnel engineering has achieved good results, and it plays a significant role in controlling the large deformation of the tunnel surrounding rock.

scholarly journals Analysis on Loose Circle of Surrounding Rock of Large Deformation Soft-Rock Tunnel

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Rui Wang ◽  
Yiyuan Liu ◽  
Xianghui Deng ◽  
Yu Zhang ◽  
Xiaodong Huang ◽  
...  
Keyword(s):  
Large Deformation ◽  
Theoretical Calculations ◽  
Rapid Development ◽  
Field Tests ◽  
Soft Rock ◽  
Strength Criterion ◽  
Surrounding Rock ◽  
Distribution Law ◽  
Geological Conditions ◽  
Rock Tunnel

With the rapid development of tunnel construction in China, deep buried and long tunnel projects are emerging in areas with complex engineering geological conditions and harsh environment, and thus large deformation of tunnels under conditions of high in situ stress and soft rock becomes increasingly prominent and endangers engineering safety. Therefore, it is of great significance to control the deformation and improve the stability of surrounding rock by analyzing the thickness and distribution law of loose circle according to the unique mechanical properties and failure mechanism of surrounding rock of large deformation soft-rock tunnel. Based on unified strength theory, this paper deduces the radius calculation formula of the loose circle by considering the influence of intermediate principal stress. Furthermore, the theoretical calculations and field tests of the loose circle in the typical sections of grade II and III deformation of Yuntunbao tunnel are carried out, and the thickness and distribution law of loose circle of surrounding rock of large deformation soft-rock tunnel is revealed. The results show that the formula based on the unified strength criterion is applicable for a large deformation tunnel in soft rock.

scholarly journals Presplitting Blasting the Roof Strata to Control Large Deformation in the Deep Mine Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Chaowen Hu ◽  
Xiaojie Yang ◽  
Ruifeng Huang ◽  
Xingen Ma
Keyword(s):  
Large Deformation ◽  
Field Tests ◽  
Soft Rock ◽  
Surrounding Rock ◽  
Deep Mine ◽  
Mining Depth ◽  
Working Face ◽  
Support Conditions ◽  
Mine Roadways ◽  
Roof Strata

As the mining depth increases, under the influence of high ground stress, the surrounding rock of deep mine roadways shows soft rock characteristics. Under the influence of mining disturbance at the working face, large deformation of the roadway has occurred. To control the large deformation of the roadway, many mines have adopted the form of combined support, which has continuously increased the support strength and achieved a certain effect. However, since the stress environment of the surrounding rock of the roadway has not been changed, large deformation of the roadway still occurs in many cases. Based on the theoretical basis of academician Manchao He’s “short cantilever beam by roof cutting,” this paper puts forward the plan of “presplitting blasting + combined support” to control the large deformation of the deep mine roadways. Without changing the original support conditions of the roadway, presplitting blasting the roof strata of the roadway, by cutting off the mechanical connection of the roof strata between the roadway and gob, improves the stress distribution of the roadway to control the large deformation. Through field tests, the results show that after presplitting blasting the roadway roof, the roadway roof subsidence is reduced by 47.9%, the ribs displacement is reduced by 45.7%, and the floor heave volume is reduced by 50.8%. The effect is significant.

Research on Supporting Technology of Wind Drift at B103W01 Workface in ShajiHai Coal Mine

2014 ◽  
Vol 501-504 ◽  
pp. 1827-1831
Author(s):  
Xiao Yu Zhang ◽  
Yu Ming Tian ◽  
Ai Dong He ◽  
Zhan Han
Keyword(s):  
Large Deformation ◽  
Field Test ◽  
Coal Mine ◽  
Soft Rock ◽  
Wind Drift ◽  
Deformation And Failure ◽  
Working Face ◽  
Constant Resistance ◽  
Test Project ◽  
Coupling Support

The deformation and failure problems in soft rock supporting cannot be effectively controlled with conventional methods. This paper put forward the coupling support technologies by the use of large deformation constant-resistance bolt, large deformation constant-resistance cable and bottom-grouting pipes, with the analysis of deformation and failure reseasons, combing with verifications in field-test project at B103W01 working face, State Grid Energy abundance Coal Limited Shajihai Coal Mine. It also provides the reference for the tunnels supporting under similar conditions.

The Mechanical Mechanism of Hulking Force Stable Principle of Surrounding Rocks in Soft Rock Roadway

2014 ◽  
Vol 1065-1069 ◽  
pp. 830-834
Author(s):  
Wei Pei Xue ◽  
Lai Wang Jing
Keyword(s):  
Stress State ◽  
Ultimate Strength ◽  
Soft Rock ◽  
Reference Value ◽  
Industrial Test ◽  
Surrounding Rock ◽  
Support Mechanism ◽  
Rock Creep ◽  
Main Factors

This paper aims to reveal the important role of the hulking force in stabilizing the roadway. After introducing the three ultimate strength of the foundation rock upon, starting from the perspective of stress state, the article on the deformation area surrounding rock for a more reasonable division, and thus gives the main factors roadway deformation.Introduced in the basis of the three ultimate strength of the rock, from the perspective of stress state, deformation of roadway surrounding rock area to carry on the reasonable division, and then the main factors of roadway deformation is presented. Second, through the analysis of the formation of the hulking force, analysis of hulking force inhibition of surrounding rock creep mechanism of dynamic mechanics,and analysis of the hulking force to improve the effect of supporting mechanics mechanism. Describes the important role of the hulking force on the stability of surrounding rock. Finally, Huaibei Coal Mining Co., 8203 guobei roadway industrial test site, Demonstrates the effectiveness of the principle. Results of this study have important reference value to change the current research in deep coal mine deep soft rock and loose seam roadway support mechanism and technology.

Simulation Analysis of the Soft Rock Inclined Shaft Surrounding Rock Control with Different Bolt Support Patterns

2014 ◽  
Vol 988 ◽  
pp. 377-382 ◽  
Author(s):  
Peng Fei Jiang
Keyword(s):  
Compressive Stress ◽  
Simulation Analysis ◽  
Soft Rock ◽  
High Strength ◽  
Surrounding Rock ◽  
Tension Stress ◽  
Deformation And Failure ◽  
Stress And Deformation ◽  
Rock Strata ◽  
Bolt Support

Taking +150 inclined shaft going through the soft rock strata at Muchengjian mine as the background, and based on the analysis of the deformation and failure feature of the roadway surrounding rock in the soft rock strata, this paper makes X-Ray Differaction (XRD) phase analysis of the soft rock; using finite difference numerical software FLAC3D, it stimulates and makes comparative analysis of the stress and deformation distribution characteristics of the roadway surrounding rock with bolt support with different intervals, and the support of the high-strength bolt with high pre-tension stress in the inclined shaft through the soft rock strata. The results show that the roadway surrounding rock in the +150 inclined shaft at Muchengjian mine is swelling soft rock prone to softening, degradation and swelling in water, which is bad for the roadway support; different types of rock strata have significant different impact on the stress and deformation of the roadway surrounding rock; for the soft rock roadway, the increased pre-tension stress of the bolt can cause higher compressive stress in the roadway surrounding rock and reduce the tension failure of the surrounding rock;compared with the end anchorage, the full-size anchorage with high pre-tension stress can cause the overlap of the conical compressive stress zone and enhance the roadway overall support.

scholarly journals Research on Control Mechanism of Surrounding Rock of Deep Gob-Side Entry Retaining

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jianxiong Liu ◽  
Jingke Wu ◽  
Yun Dong ◽  
Yanyan Gao ◽  
Jihua Zhang ◽  
...  
Keyword(s):  
Large Deformation ◽  
High Stress ◽  
Original System ◽  
Field Investigation ◽  
Surrounding Rock ◽  
Eccentric Load ◽  
Deformation And Failure ◽  
Body Fracture ◽  
Stress States ◽  
Term Creep

To address the large deformation of the surrounding rock of deep gob-side entry retaining under high stress, lithological characteristics of the surrounding rock and failure model of support body and their evolutionary processes are analyzed through field investigation and theoretical analysis. Failure mechanisms of surrounding rock and the technology to control it are studied systematically. The results show that the causes of the large deformation of the surrounding rock are weak thick mudstones with softening property and water absorption behavior, as well as its fragmentation, dilatancy, and long-term creep during strong disturbance and highly centralized stress states. The cross-section shape of the roadway after deformation and failure of the surrounding rock is obviously asymmetric in both the horizontal and vertical directions. Since the original system supporting the surrounding rock is unable to completely bear the load, each part of the supporting system is destroyed one after the other. The failure sequences of the surrounding rock are as follows: (1) roadway roof fracture in the filling area, (2) filling body fracture under eccentric load, (3) rapid subsidence of the roadway roof, and (4) external crack drum and rib spalling at the solid coal side. Due to this failure sequence, the entire surrounding rock becomes unstable. A partitioned coupling support and a quaternity control technology to support the surrounding rock are proposed, in which the roof of the filling area plays a key role. The technology can improve the overall stability of gob-side entry retaining, prevent support structure instability caused by local failure of the surrounding rock, and ensure the safety and smoothness of roadways.

scholarly journals Analysis of Stress and Deformation Characteristics of Deep-Buried Phyllite Tunnel Structure under Different Cross-Section Forms and Initial Support Parameters

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Hao Wu ◽  
Xiaohua Yang ◽  
Shichun Cai ◽  
Binjing Zhao ◽  
Kunlong Zheng
Keyword(s):  
Large Deformation ◽  
Double Layer ◽  
Soft Rock ◽  
Surrounding Rock ◽  
Original Design ◽  
Supporting Structure ◽  
Initial Support ◽  
Stress And Deformation ◽  
Rock Tunnels ◽  
Layer Steel

Deep-buried soft rock tunnels exhibit low strength and easy deformation under the influence of high ground stress. The surrounding rock of the soft rock tunnel may undergo large deformation during the construction process, thereby causing engineering problems such as the collapse of the vault, bottom heave, and damage to the supporting structure. The Chengwu Expressway Tunnel II, considered in this study, is a phyllite tunnel, with weak surrounding rock and poor water stability. Under the original design conditions, the supporting structure exhibits stress concentration and large deformation. To address these issues, three schemes involving the use of the double-layer steel arch to support, weakening of the steel arch close to the excavation surface, and weakening of the steel arch away from the excavation surface to support were proposed. Using these schemes, the inverted radius was varied to explore its influence on different support schemes. For simulation, the values of the inverted radius selected were as follows: 1300 cm, 1000 cm, and 700 cm. The proposed support plan was simulated using FLAC3D, and the changes in the pressure between the initial support and surrounding rock, the settling of the vault, and the surrounding convergence were investigated. The numerical simulation results of monitoring the surrounding rock deformation show that the double-layer steel arch can effectively reduce the large deformation of the soft rock well. When the stiffness of one of the steel arches was weakened, the support’s ability to control the deformation was weakened; however, it still showed reliable performance in controlling deformation. However, changing the radius of the invert had an insignificant effect on the deformation and force of the supporting structure.

Sign in / Sign up

Export Citation Format

Share Document