scholarly journals Prediction Model of In-Band Blocking Interference under the Electromagnetic Radiation of Dual-Frequency Continuous Wave

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Kai Zhao ◽  
Guanghui Wei ◽  
Yaping Wang ◽  
Xiaodong Pan
Keyword(s):  
Electric Field ◽  
Electromagnetic Radiation ◽  
Continuous Wave ◽  
Prediction Models ◽  
Single Frequency ◽  
Prediction Errors ◽  
Test Results ◽  
Dual Frequency ◽  
Communication Station ◽  
Peak Value

Two hypotheses for the blocking effect mechanisms under the electromagnetic radiation are presented, and the corresponding dual-frequency interference prediction models are proposed, which can be used to predict the working state of equipment under the condition that the single-frequency susceptibility is known. By taking a radar and a communication radio as the EUT, the experiments of dual-frequency continuous wave electromagnetic radiation are designed and carried out to verify the prediction models. The test results show that the sensitive bandwidth of blocking interference effect for the tested radar and the communication station is consistent with their working bandwidth, respectively. By substituting the test data into the proposed prediction models, the prediction errors of the models are less than 13%. Moreover, it can be found that the tested radar is more sensitive to the peak value of electric field, and the tested communication station is more sensitive to the effective value of electric field.

scholarly journals Sensitivity Criterion and Law on a Navigation Receiver under Single Frequency Electromagnetic Radiation

2021 ◽  
Vol 12 (1) ◽  
pp. 204
Author(s):  
Mei Li ◽  
Guanghui Wei
Keyword(s):  
Electromagnetic Radiation ◽  
Electromagnetic Interference ◽  
Continuous Wave ◽  
Density Ratio ◽  
Single Frequency ◽  
Initial Value ◽  
Step Size ◽  
Testing Method ◽  
Noise Density ◽  
Working Frequency

To objectively assess the anti-electromagnetic interference ability of the navigation receiver, the sensitivity criterion of a certain type of navigation receiver is tested under single-frequency continuous wave electromagnetic radiation with an optimized testing method. The experimental results show that it is difficult to guarantee the accuracy of the measurement value of the sensitivity level by using the carrier-to-noise density ratio (C/N0) as the sensitivity criterion, but the initial C/N0 of each satellite can be used as the basis for identifying whether the navigation system has recovered from the interference. The experimental error is dramatically decreased when the sensitivity criterion of “the sensitive phenomenon appears within the first 4 s, and the loss of positioning lasts for 30 s” is employed, the variable interference power step size is adopted and all of the satellites C/N0 are required to recover to the initial value after an interference. The critical interference field intensity error can be controlled within 1 dB by using all these measures. The sensitivity law of the navigation receiver is the same under different working signal intensities. It is significantly sensitive in the working frequency bandwidth. It is also quite sensitive in −11.5 MHz~55.5 MHz of the frequency offset range. The positive sensitive bandwidth is about 5 times that of the negative sensitive bandwidth.

scholarly journals Practical Prediction Models of Tensile Strength and Reinforcement-Concrete Bond Strength of Low-Calcium Fly Ash Geopolymer Concrete

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 875
Author(s):  
Chenchen Luan ◽  
Qingyuan Wang ◽  
Fuhua Yang ◽  
Kuanyu Zhang ◽  
Nodir Utashev ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Fly Ash ◽  
Bond Strength ◽  
Prediction Models ◽  
Splitting Tensile Strength ◽  
Geopolymer Concrete ◽  
Structural Factors ◽  
Test Results ◽  
Portland Cement Concrete ◽  
Low Calcium

There have been a few attempts to develop prediction models of splitting tensile strength and reinforcement-concrete bond strength of FAGC (low-calcium fly ash geopolymer concrete), however, no model can be used as a design equation. Therefore, this paper aimed to provide practical prediction models. Using 115 test results for splitting tensile strength and 147 test results for bond strength from experiments and previous literature, considering the effect of size and shape on strength and structural factors on bond strength, this paper developed and verified updated prediction models and the 90% prediction intervals by regression analysis. The models can be used as design equations and applied for estimating the cracking behaviors and calculating the design anchorage length of reinforced FAGC beams. The strength models of PCC (Portland cement concrete) overestimate the splitting tensile strength and reinforcement-concrete bond strength of FAGC, so PCC’s models are not recommended as the design equations.

scholarly journals A Dual Frequency Ultrasonic Cleaning Tank Developed by Transient Dynamic Analysis

2021 ◽  
Vol 11 (2) ◽  
pp. 699
Author(s):  
Worapol Tangsopa ◽  
Jatuporn Thongsri
Keyword(s):  
High Performance ◽  
Acoustic Pressure ◽  
Single Frequency ◽  
Response Analysis ◽  
Dual Frequency ◽  
Transient Dynamic Analysis ◽  
Ultrasonic Cleaning ◽  
Calculational Method ◽  
Successful Design ◽  
Harmonic Response Analysis

At present, development of manufacturer’s ultrasonic cleaning tank (UCT) to match the requirements from consumers usually relies on computer simulation based on harmonic response analysis (HRA). However, this technique can only be used with single-frequency UCT. For dual frequency, the manufacturer used information from empirical experiment alongside trial-and-error methods to develop prototypes, resulting in the UCT that may not be fully efficient. Thus, lack of such a proper calculational method to develop the dual frequency UCT was a problem that greatly impacted the manufacturers and consumers. To resolve this problem, we proposed a new model of simulation using transient dynamics analysis (TDA) which was successfully applied to develop the prototype of dual frequency UCT, 400 W, 18 L in capacity, eight horn transducers, 28 and 40 kHz frequencies for manufacturing. The TDA can indicate the acoustic pressure at all positions inside the UCT in transient states from the start to the states ready for proper cleaning. The calculation also reveals the correlation between the positions of acoustic pressure and the placement positions of transducers and frequencies. In comparison with the HRA at 28 kHz UCT, this TDA yielded the results more accurately than the HRA simulation, comparing to the experiments. Furthermore, the TDA can also be applied to the multifrequency UCTs as well. In this article, the step-by-step development of methodology was reported. Finally, this simulation can lead to the successful design of the high-performance dual frequencies UCT for the manufacturers.

scholarly journals Insights into the molecular properties underlying antibacterial activity of prenylated (iso)flavonoids against MRSA

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sylvia Kalli ◽  
Carla Araya-Cloutier ◽  
Jos Hageman ◽  
Jean-Paul Vincken
Keyword(s):  
Prediction Models ◽  
External Validation ◽  
Qsar Model ◽  
Prediction Errors ◽  
Activity Data ◽  
Gram Positive Bacteria ◽  
Level Of Activity ◽  
Formal Charge ◽  
Validation Set

AbstractHigh resistance towards traditional antibiotics has urged the development of new, natural therapeutics against methicillin-resistant Staphylococcus aureus (MRSA). Prenylated (iso)flavonoids, present mainly in the Fabaceae, can serve as promising candidates. Herein, the anti-MRSA properties of 23 prenylated (iso)flavonoids were assessed in-vitro. The di-prenylated (iso)flavonoids, glabrol (flavanone) and 6,8-diprenyl genistein (isoflavone), together with the mono-prenylated, 4′-O-methyl glabridin (isoflavan), were the most active anti-MRSA compounds (Minimum Inhibitory Concentrations (MIC) ≤ 10 µg/mL, 30 µM). The in-house activity data was complemented with literature data to yield an extended, curated dataset of 67 molecules for the development of robust in-silico prediction models. A QSAR model having a good fit (R2adj 0.61), low average prediction errors and a good predictive power (Q2) for the training (4% and Q2LOO 0.57, respectively) and the test set (5% and Q2test 0.75, respectively) was obtained. Furthermore, the model predicted well the activity of an external validation set (on average 5% prediction errors), as well as the level of activity (low, moderate, high) of prenylated (iso)flavonoids against other Gram-positive bacteria. For the first time, the importance of formal charge, besides hydrophobic volume and hydrogen-bonding, in the anti-MRSA activity was highlighted, thereby suggesting potentially different modes of action of the different prenylated (iso)flavonoids.

Modeling and Design of Permanent Magnet Vibration-to-Electrical Power Generator’s Induction Coil

2012 ◽  
Vol 588-589 ◽  
pp. 614-617
Author(s):  
Zhi Hua Wang ◽  
Mei Ling Li ◽  
Jian Zhang ◽  
Li Wang ◽  
Yong Xu
Keyword(s):  
Permanent Magnet ◽  
Electrical Power ◽  
Induction Coil ◽  
Test Results ◽  
Coil Design ◽  
Sinusoidal Vibration ◽  
Electrical Generator ◽  
Simulation Results ◽  
Peak Value

The Equivalent Turn Number of Coil (ETNC) is proposed for induction coil design. Simulation results show that the vibrationonthe induction coil’s structure. The optimized coil is composed by two symmetry parts on the condition of sinusoidal vibration. The effective value of output EMF of optimized coil increases 51.39% than uniform coil’s. In the experiment, the optimized and uniform coils are fabricated with 600 turns and comparatively studied in the same vibration-to-electrical generator. The test results show that the peak-to-peak value and effective value of output EMF of the optimized coil can increase up to 52.59% and 48.76%, respectively, compared with the uniform coil.

scholarly journals A Local Oscillator Phase Compensation Technique for Ultra-Wideband Stepped-Frequency Continuous Wave Radar Based on a Low-Cost Software-Defined Radio

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 780
Author(s):  
Kazunori Takahashi ◽  
Takashi Miwa
Keyword(s):  
Software Defined Radio ◽  
Initial Phase ◽  
Continuous Wave ◽  
Low Cost ◽  
Local Oscillator ◽  
The Other ◽  
Ultra Wideband ◽  
Single Frequency ◽  
Wave Radar ◽  
Stepped Frequency

The paper discusses a way to configure a stepped-frequency continuous wave (SFCW) radar using a low-cost software-defined radio (SDR). The most of high-end SDRs offer multiple transmitter (TX) and receiver (RX) channels, one of which can be used as the reference channel for compensating the initial phases of TX and RX local oscillator (LO) signals. It is same as how commercial vector network analyzers (VNAs) compensate for the LO initial phase. These SDRs can thus acquire phase-coherent in-phase and quadrature (I/Q) data without additional components and an SFCW radar can be easily configured. On the other hand, low-cost SDRs typically have only one transmitter and receiver. Therefore, the LO initial phase has to be compensated and the phases of the received I/Q signals have to be retrieved, preferably without employing an additional receiver and components to retain the system low-cost and simple. The present paper illustrates that the difference between the phases of TX and RX LO signals varies when the LO frequency is changed because of the timing of the commencement of the mixing. The paper then proposes a technique to compensate for the LO initial phases using the internal RF loopback of the transceiver chip and to reconstruct a pulse, which requires two streaming: one for the device under test (DUT) channel and the other for the internal RF loopback channel. The effect of the LO initial phase and the proposed method for the compensation are demonstrated by experiments at a single frequency and sweeping frequency, respectively. The results show that the proposed method can compensate for the LO initial phases and ultra-wideband (UWB) pulses can be reconstructed correctly from the data sampled by a low-cost SDR.

scholarly journals Precise Point Positioning Using Dual-Frequency GNSS Observations on Smartphone

Sensors ◽  
2019 ◽  
Vol 19 (9) ◽  
pp. 2189 ◽  
Author(s):  
Qiong Wu ◽  
Mengfei Sun ◽  
Changjie Zhou ◽  
Peng Zhang
Keyword(s):  
Precise Point Positioning ◽  
Frequency Mode ◽  
Single Frequency ◽  
Dual Frequency ◽  
Static Mode ◽  
Position Errors ◽  
Point Positioning ◽  
Similar Accuracy ◽  
Positioning Algorithm ◽  
Gnss Observations

The update of the Android system and the emergence of the dual-frequency GNSS chips enable smartphones to acquire dual-frequency GNSS observations. In this paper, the GPS L1/L5 and Galileo E1/E5a dual-frequency PPP (precise point positioning) algorithm based on RTKLIB and GAMP was applied to analyze the positioning performance of the Xiaomi Mi 8 dual-frequency smartphone in static and kinematic modes. The results showed that in the static mode, the RMS position errors of the dual-frequency smartphone PPP solutions in the E, N, and U directions were 21.8 cm, 4.1 cm, and 11.0 cm, respectively, after convergence to 1 m within 102 min. The PPP of dual-frequency smartphone showed similar accuracy with geodetic receiver in single-frequency mode, while geodetic receiver in dual-frequency mode has higher accuracy. In the kinematic mode, the positioning track of the smartphone dual-frequency data had severe fluctuations, the positioning tracks derived from the smartphone and the geodetic receiver showed approximately difference of 3–5 m.

Sign in / Sign up

Export Citation Format

Share Document