scholarly journals Near-Field HF-RFID and CMA-Based Circularly Polarized Far-Field UHF-RFID Integrated Tag Antenna

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Arnon Sakonkanapong ◽  
Chuwong Phongcharoenpanich
Keyword(s):  
Near Field ◽  
Axial Ratio ◽  
Dual Band ◽  
Mode Analysis ◽  
Impedance Bandwidth ◽  
Far Field ◽  
Uhf Rfid ◽  
Characteristic Mode ◽  
Rfid Tag ◽  
Circularly Polarized

This research proposes an integrated high-frequency (HF) and ultrahigh-frequency (UHF) passive radio frequency identification (RFID) tag antenna for near-field (13.56 MHz) and far-field (920–925 MHz) communication. This tag antenna is advantageous for the applications with lossy material in the near-field communication and mitigates polarization loss in the far-field communications. The HF-RFID tag antenna is of square spiral structure, and the circularly polarized UHF-RFID structure consists of a square loop radiator with cascading loop feeding and shorted stub. The structure of HF-RFID tag antenna situated inside the circularly polarized UHF-RFID tag can avoid the significant effect of the near-field magnetic coupling from the square loop. The UHF-RFID tag antenna is realized by using characteristic mode analysis for wideband circular polarization. The HF-RFID structure is conjugate-matched with NXP NT3H2111 chip, and the UHF-RFID structure is conjugate-matched with NXP G2X chip. Simulations were carried out, and an antenna prototype was fabricated. The experimental results reveal that the radiation pattern of UHF-RFID tag antenna is bidirectional with a gain of 0.31 dBic. The impedance bandwidth covers the frequency range of 903–944 MHz, and the axial ratio in boresight direction at 922.5 MHz is 1.67 dB, with the axial ratio bandwidth over 863–938 MHz. The maximum near-field and far-field reading ranges are 4.9 cm and 8.7 m. The proposed integrated dual-band passive tag antenna is operationally ideal for HF-RFID and UHF-RFID applications.

Characteristic mode-based compact circularly polarized metasurface antenna for in-band RCS reduction

2019 ◽  
Vol 12 (2) ◽  
pp. 131-137
Author(s):  
Puneeth Kumar Rajanna ◽  
Karthik Rudramuni ◽  
Krishnamoorthy Kandasamy
Keyword(s):  
Satellite Communication ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Mode Analysis ◽  
Impedance Bandwidth ◽  
Compact Structure ◽  
Characteristic Mode ◽  
Circularly Polarized ◽  
Rectangular Patch ◽  
Full Wave Analysis

AbstractThis paper presents a novel design of a low profile circularly polarized (CP) metasurface (MTS) antenna with in-band radar cross-section (RCS) reduction property. The MTS is loaded as a superstrate on slot antenna and it can be viewed as a polarization-dependent MTS (PDMTS). The rectangular patch-based PDMTS is analyzed using characteristic mode analysis to find two orthogonal degenerate modes, which produces CP waves. Linearly polarized slot antenna is used to excite the PDMTS. The performance of PDMTS loaded slot antenna is analyzed numerically using full-wave analysis method. The PDMTS CP antenna is fabricated and its performance is tested experimentally. The proposed antenna has a compact structure and it has an overall size of $0.52{\lambda _0}\times 0.52{\lambda _0} \times 0.078{\lambda _0}$ (where ${\lambda _0}$ is the free space wavelength). The measured results show that the PDMTS antenna achieves $-10\,{\rm dB}$ impedance bandwidth of 29.41$\%$, 3-dB axial ratio bandwidth of 9.05$\%$, broadside gain of 6.34 dB, and monostatic RCS reduction of $-30.2\,{\rm dBsm}$ at the resonant frequency of 5.86 GHz. The simulated results are in well agreement with the measured results and it is well suited for C-band Radar and Satellite communication.

scholarly journals Compact Broadband Circularly Polarized CPW-Fed Antenna with Characteristic Mode Analysis

2022 ◽  
Vol 2022 ◽  
pp. 1-11
Author(s):  
Wei Xu ◽  
Jingchang Nan ◽  
Mingming Gao
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Mode Analysis ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Characteristic Mode ◽  
Circularly Polarized ◽  
Low Profile ◽  
Compact Size

A compact circularly polarized (CP) antenna is proposed for low-profile and wideband operation based on characteristic mode analysis (CMA). A ring patch with a gap and two arc-shaped metallic stubs as the radiator is analyzed and optimized by CMA to figure out the orthogonal modes and operating frequency band for potential good axial ratio (AR) performance. The studies of these CP modes provide a physical insight into the property of broadband circular polarization. Such an in-depth understanding paves the way for the proposal of novel CP antenna with separation between the design of radiator and feeding network. A 50-Ω coplanar waveguide (CPW) is introduced and placed appropriately to excite the desired modes based on the information from CMA, which employs two asymmetric ground planes to improve the performance in terms of AR and impedance matching. The antenna with a compact size of 0.71λ0 × 0.76λ0 × 0.038λ0 (λ0 is the free-space wavelength at the center frequency of the 3-dB AR bandwidth) is fabricated and measured for validation. The realized gain varies from 1.6 to 3.1 dBic over the operating bandwidth characterized by the measured 10-dB impedance bandwidth of 83.8% (3.98–9.72 GHz) and 3-dB AR bandwidth of 70.3% (4.59–9.57 GHz), respectively.

scholarly journals A Wideband Circularly Polarized Antenna with Characteristic Mode Analysis

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Lei Chang ◽  
Ling-Lu Chen ◽  
Jian-Qiang Zhang ◽  
Dan Li
Keyword(s):  
Microstrip Line ◽  
Ground Plane ◽  
Axial Ratio ◽  
Mode Analysis ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Characteristic Mode ◽  
Circularly Polarized ◽  
Mode Method ◽  
Operating Bandwidth

A wideband circularly polarized (CP) antenna is presented to achieve enhanced impedance, axial ratio (AR), and gain bandwidths. The antenna consists of two circular patches, a split-ring microstrip line with six probes, and a circular ground plane. By using these six probes which are placed in sequence on the split-ring microstrip line, the operating bandwidth of the proposed antenna is increased. The characteristic mode method is used to analyze different modes of the antenna and reveal the mechanism of extending the 3-dB AR bandwidth. Measured results show that the proposed antenna obtains an impedance bandwidth of 1.486–2.236 GHz (40.3%) for S11 ≤ −18 dB, a 3-dB AR bandwidth of 1.6–2.2 GHz (31.6%), and a boresight gain of 8.89 ± 0.87 dBic.

Circularly Polarized RFID Tag Antenna Design for Metallic Poles Using Characteristic Mode Analysis

2019 ◽  
Vol 18 (7) ◽  
pp. 1327-1331 ◽  
Author(s):  
Yi Yan ◽  
Jun Ouyang ◽  
Xiao Ma ◽  
Rui Wang ◽  
Abubakar Sharif
Keyword(s):  
Antenna Design ◽  
Mode Analysis ◽  
Characteristic Mode ◽  
Rfid Tag ◽  
Circularly Polarized

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

Reconfigurable circularly polarized capacitive coupled microstrip antenna

2016 ◽  
Vol 9 (4) ◽  
pp. 843-850 ◽  
Author(s):  
Dinesh Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
Santanu Dwari ◽  
Ganga Prasad Pandey ◽  
Sandeep Kumar
Keyword(s):  
Circular Polarization ◽  
Microstrip Antenna ◽  
Axial Ratio ◽  
Dual Band ◽  
Single Frequency ◽  
Impedance Bandwidth ◽  
Pin Diode ◽  
Dual Frequency ◽  
Pin Diodes ◽  
Circularly Polarized

The design and measurement of reconfigurable circularly polarized capacitive fed microstrip antenna are presented. Small isosceles right angle triangular sections are removed from diagonally opposite corners for the generation of circular polarization (CP) of axial ratio bandwidth of 11.1%. Horizontal slits of different lengths are inserted at the edges of the truncated patch to provide the dual-band CP and by switching PIN diodes across the slits ON and OFF, reconfigurable circularly polarized antenna is realized. The antenna shows dual-band behavior with reconfigurable CP. In order to enhance the operation bandwidth of the antenna, an inclined slot was embedded on the patch along with PIN diodes across the horizontal slits. This proposed antenna gave an impedance bandwidth of 66.61% (ON state) ranging from 4.42 to 8.80 GHz and 68.42% (OFF state) ranging from 4.12 to 8.91 GHz and exhibits dual-frequency CP with PIN diode in OFF state and single-frequency CP with PIN diode in ON state with good axial ratio bandwidth. The axial ratio bandwidth of 4.42, 2.35, and 2.72% is obtained from the antenna. The antenna has a similar radiation pattern in all the three different CP bands and almost constant gain within the bands of CP operation.

A compact, dual wide-band circularly polarized, modified square ring slot antenna for C and Ku band applications

2018 ◽  
Vol 11 (2) ◽  
pp. 182-189 ◽  
Author(s):  
Shilpee Patil ◽  
Anil Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Simulated Data ◽  
Axial Ratio ◽  
Wide Band ◽  
Radiation Characteristic ◽  
Dual Band ◽  
Slot Antenna ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Circularly Polarized

AbstractThis paper presents a compact microstrip antenna using FR-4 substrate for dual band circularly polarized operation using a modified square ring slot in the ground plane with microstrip line feed. Simulation of the impedance characteristic and radiation characteristic for the proposed antenna is carried out using commercially available HFSS software. The simulated data validate measured results and shows good agreement. Proposed antenna shows an impedance bandwidth (return loss >10 dB) of 50.88% at 5.9 GHz of center frequency and 29.92% at 12.8 GHz of center frequency for lower and upper band, respectively. The 3 dB axial ratio bandwidth for lower and upper band is 26.4 and 3.0%, respectively and measured peak gain for the lower and upper band is found as 3.2 and 3.4 dBic, respectively. The proposed antenna can be suitable for wireless communication in C and Ku bands.

scholarly journals Metallic Reflector-Based X-Band Circularly Polarized Hollow Dielectric Resonator Antenna for High Gain in UWB Applications

2021 ◽  
Author(s):  
SACHIN KUMAR YADAV ◽  
Amanpreet Kaur ◽  
Rajesh Khanna
Keyword(s):  
Circular Polarization ◽  
Dielectric Resonator ◽  
Near Field ◽  
Axial Ratio ◽  
High Gain ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Circularly Polarized ◽  
X Band ◽  
Peak Gain

Abstract A circularly polarized hollow dielectric resonator antenna (CPHDRA) is designed for X-band applications. Rectangular dielectric resonator (RDR) is used as a radiator element, fed by a quarter-wave transformer (QWT) feedline. By performance of the RDR antenna, an air cylindrical rod structure is extracted from RDR to enhance the gain and impedance bandwidth. Two parasitic strips are placed on the top of the RDR to achieve circular polarization with reported ≤ 3-dB axial ratio (AR) bandwidth for X-band applications. In this article, UWB antenna covers range from 2.74 to 10.4GHz by using asymmetrical defective ground structure (DGS). In near field of the dielectric resonator, three different radiating modes namely HE11δ, HE21δ, HE23δ, and HE32δ are at 4.4, 6, 8.8, and 9.9 GHz. For the generation of circular polarization (CP), two orthogonal modes are generated at 8.8 and 9.9 GHz as per XZ and YZ planes. It has reported 23.8 % (8 to 10.1 GHz) of 3-dB AR bandwidth. The simulated and measured impedance bandwidths are 118.46 % and 121.12 % along with a peak gain of 6.55 dB without the use of a metallic reflector. By using a metallic reflector suspended in the bottom side of the substrate with a distance of 13.1mm is reported along with the peak gain of 9.8 dBi.

scholarly journals Design of Circularly Polarized Modified Minkowski Fractal Based Antenna for UHF RFID Reader Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 94-100 ◽  
Author(s):  
S. Pandey ◽  
G. P. Pandey ◽  
P. M. Sarum
Keyword(s):  
Radio Frequency Identification ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Narrow Slit ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Compact Antenna ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Patch Boundary

A compact, square shaped microstrip fractal antenna with asymmetrical pairs of T-slits for circularly polarized (CP) radiation and radio frequency identification (RFID) reader applications is proposed and experimentally investigated. Design is based on narrow slit modified Minkowski island fractal geometry. Circular polarization along with size reduction is achieved by inserting four symmetrical pairs of T-slits at the square patch boundary of the single-probe-feed radiator. Proposed geometry is tuned at resonant frequency of 914 MHz by optimization of dimensions of the two T-slits. Compactness of the antenna is achieved by increasing the overall sizes of the slits. Antenna is fabricated on FR4 substrate with a size of 47.2×47.2×1.6 mm3 (0.143λ0 X 0.143λ0 X 0.005λ0) and tested to validate the simulated results. The 3-dB axial-ratio (AR) bandwidth and impedance bandwidth of the proposed antenna design are found to be 7 MHz (911-918 MHz) and 24 MHz (909-933 MHz) respectively. A design equation is develped based on the parametric study that can be used to design a compact antenna with CP for UHF RFID applications covering the frequency range from 887 to 1023 MHz.

Sign in / Sign up

Export Citation Format

Share Document