scholarly journals Proficient Photocatalytic and Sonocatalytic Degradation of Organic Pollutants Using CuO Nanoparticles

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Moondeep Chauhan ◽  
Navneet Kaur ◽  
Pratibha Bansal ◽  
Rajeev Kumar ◽  
Sesha Srinivasan ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Rate Constant ◽  
Degradation Mechanism ◽  
Research Work ◽  
Dye Decolorization ◽  
Copper Oxide Nanoparticles ◽  
Cuo Nps ◽  
First Order Kinetics ◽  
Degradation Of Dyes ◽  
The Stability

In recent years, due to the advancement in nanotechnology, advanced oxidation processes (AOPs), especially sonocatalysis and photocatalysis, have become a topic of interest for the elimination of pollutants from contaminated water. In the research work reported here, an attempt has been made to study and establish a physicochemical mechanism for the catalytic activity of copper oxide nanoparticles (CuO NPs) in AOPs using the degradation of dyes as model contaminants. CuO NPs exhibited brilliant sonocatalytic and photocatalytic activities for the degradation of a cationic dye (Victoria Blue) as well as an anionic dye (Direct Red 81). The degradation efficiency of CuO NPs was calculated by analysing the variation in the absorbance of dye under a UV-Vis spectrophotometer. The influence of different operating parameters on the catalytic activity of CuO NPs, such as the amount of catalysts dose, pH of the solution, and the initial dye concentration, was thoroughly investigated. In addition, the kinetic process for the degradation was also examined. It was observed that both dyes exhibited and followed the pseudo-first-order kinetics relation. The rate constant for sonocatalysis was high as compared to photocatalysis. The rate constant for both sonocatalysis and photocatalysis was successfully established, and reusability tests were done to ensure the stability of the used catalysts. To get an insight into the degradation mechanism, experiments were performed by using ⋅OH radical scavengers. The efficacy of CuO NPs for dye decolorization was found to be superior for the sonocatalyst than the photocatalyst.

scholarly journals Synthesis of Magnetic Targeted Cellulose Composite Decorated with Poly(AA-DMC) for Synergistic Adsorption Degradation of Congo Red from Organic Wastewater

2021 ◽  
Author(s):  
Chen Ling ◽  
Dai Yimin ◽  
Lu Qi ◽  
Fang Chengqian ◽  
Wang Zhiheng ◽  
...  
Keyword(s):  
Congo Red ◽  
Magnetic Particles ◽  
Degradation Mechanism ◽  
Degradation Of Dyes ◽  
Cellulose Composites ◽  
Natural Cellulose ◽  
The Stability ◽  
Adsorption Desorption ◽  
Cr Removal ◽  
Organic Wastewater

Abstract A brand-new environmental-friendly magnetic cellulosic adsorbent MnFe2O4@Cel-g-p(AA-DMC) was synthesized by natural cellulose and easy-recovered magnetic particles MnFe2O4. Magnetic cellulose composites were characterized by SEM, TEM, XPS, XRD, BET, VSM, TGA and FTIR. The MnFe2O4NPs could activate the peroxymonosulfate (PMS) to produce various reactive oxygen species (ROS). Accordingly, magnetic cellulose composites can synergistic adsorption degradation of dyes from organic wastewater. The Congo red (CR) removal efficiency by MnFe2O4@Cel-g-p(AA-DMC) via PMS activated by MnFe2O4 reached a maximum of 96.9% and only 9% reduction after four adsorption-desorption cycles, indicating the stability and recoverability of adsorbent. It is worth noting that adsorbents can be quickly recovered from aqueous solution by external magnet owing to superior saturation magnetization (35.44 emu·g-1). A possible degradation mechanism of CR on the MnFe2O4@Cel-g-p(AA-DMC) composite was proposed. The results suggest that adsorbent display strong potential for the removal of CR dyes from organic wastewater.

Phenolic compound-mediated single-step fabrication of copper oxide nanoparticles for elucidating their influence on anti-bacterial and catalytic activity

2017 ◽  
Vol 41 (11) ◽  
pp. 4458-4467 ◽  
Author(s):  
Niranjan Bala ◽  
M. Sarkar ◽  
M. Maiti ◽  
P. Nandy ◽  
R. Basu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Copper Oxide ◽  
Ambient Temperature ◽  
Phenolic Compound ◽  
Rosmarinic Acid ◽  
Copper Oxide Nanoparticles ◽  
Single Step ◽  
Oxide Nanoparticles ◽  
Cuo Nps

A single-step synthesis of copper oxide nanoparticles (CuO NPs) from a phenolic compound (rosmarinic acid) at ambient temperature was developed in this study.

scholarly journals Development and Evaluation of Drug Loaded Regenerated Bacterial Cellulose-Based Matrices as a Potential Dosage Form

2020 ◽  
Vol 8 ◽  
Author(s):  
Munair Badshah ◽  
Hanif Ullah ◽  
Feng He ◽  
Fazli Wahid ◽  
Umar Farooq ◽  
...  
Keyword(s):  
Bacterial Cellulose ◽  
Drug Loading ◽  
Research Work ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
First Order Kinetics ◽  
Wide Range ◽  
Release Data ◽  
The Stability

Bacterial cellulose (BC) is a highly pure form of cellulose and possesses superior physico-mechanical properties with wide range of applications. These properties of BC can further be improved by various modifications, including its regeneration from the BC solution. In the current research work, regenerated BC (R-BC) matrices were prepared using N-methyl-morpholine-oxide (NMMO; 50% w/w solution in water) and loaded with model drugs, i.e., famotidine or tizanidine. The characterization of drug loaded regenerated BC (R-BC-drug) matrices was carried out using Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), which revealed the stability of matrices and successful drug loading. Results of dissolution studies showed immediate (i.e., >90%) drug release in 30 min. The drugs release data was found to best fit into first order kinetics model having R2 values >0.99 for all the formulations. These results indicated that regenerated BC-based matrices had the ability to be used for delivery of orally administered drugs.

ANTIBIOTIC PROFILE AND ANTIBACTERIAL ACTIVITY OF COPPER OXIDE NANOPARTICLES AGAINST Pseudomonas fluorescens ISOLATED FROM WOUND INFECTION

2019 ◽  
Vol 9 (o3) ◽  
Author(s):  
Haider Qassim Raheem ◽  
Takwa S. Al-meamar ◽  
Anas M. Almamoori
Keyword(s):  
Antibacterial Activity ◽  
Copper Oxide ◽  
Pseudomonas Fluorescens ◽  
Wide Spectrum ◽  
Copper Oxide Nanoparticles ◽  
Morphological Properties ◽  
Clinical Samples ◽  
Oxide Nanoparticles ◽  
Cuo Nps ◽  
Disk Diffusion Assay

Fifty specimens were collected from wound patients who visited Al-Hilla Teaching Hospital. The samples were grown on Blood and MacConkey agar for 24-48 hr at 37oC. The bacterial isolates which achieved as a pure and predominant growth from clinical samples as Pseudomonas fluorescens, were identified using morphological properties and Vitek2 system. The anti-bacterial activity of copper oxide nanoparticles (CuO NPs) against was tested by (disk diffusion assay) using dilutions of (400, 200, 100, 50, 25, and 12.5‎µ‎g/ml). The (MIC and MBC) of each isolate was determined. CuO NPs shows wide spectrum antibacterial activity against tested bacteria with rise zone of inhibition diameter that is proportionate with the increase in nanoparticle concentration. The MIC of CuO NPs extended from 100-200‎µ‎g/ml and the MBC ranged from 200-400‎µ‎g/ml. The antibiotic profile was determined by Viteck 2 compact system (Biomérieux). CuO NPs‎ found highly effective and safe in P. fluorescens wounds infections comparing with used antibiotics.

A Facile Synthesis of Cu2O and CuO Nanoparticles Via Sonochemical Assisted Method

2018 ◽  
Vol 15 (2) ◽  
pp. 209-213 ◽  
Author(s):  
Sathish Mohan Botsa ◽  
Ramadevi Dharmasoth ◽  
Keloth Basavaiah
Keyword(s):  
Diffuse Reflectance Spectroscopy ◽  
Cupric Oxide ◽  
Copper Acetate ◽  
Chemical Properties ◽  
Copper Oxide Nanoparticles ◽  
Reducing Agents ◽  
Sonochemical Method ◽  
Phase Purity ◽  
X Ray ◽  
Cuo Nps

Background: During past two decades, functional nanomaterials have received great attention for many technological applications such as catalysis, energy, environment, medical and sensor due to their unique properties at nanoscale. However, copper oxide nanoparticles (NPs) such as CuO and Cu2O have most widely investigated for many potential applications due to their wide bandgap, high TC, high optical absorption and non-toxic in nature. The physical and chemical properties of CuO and Cu2O NPs are critically depending on their size, morphology and phase purity. Therefore, lots of efforts have been done to prepare phase CuO and Cu2O NPs with different morphology and size. Method: The synthesis of cupric oxide (CuO) and cuprous oxide (Cu2O) NPs using copper acetate as a precursor by varying the reducing agents such as hydrazine sulphate and hydrazine hydrate via sonochemical method. The phase, morphology and crystalline structure of a prepared CuO and Cu2O NPs were investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray (EDS) and UV-Visible Diffuse reflectance spectroscopy (DRS). Results: The phase of NPs was tuned as a function of reducing agents.XRD patterns confirmed the formation of pure phase crystalline CuO and Cu2O NPs. FTIR peak at 621 cm-1 confirmed Cu(I)-O vibrations, while CuO vibrations confirmed by the presence of two peaks at 536 and 586 cm-1. Further investigation was done by Raman, which clearly indicates the presence of peaks at 290, 336, 302 cm-1 and 173, 241 cm-1 for CuO and Cu2O NPs, respectively. The FESEM images revealed rod-like morphology of the CuO NPs while octahedral like shape for Cu2O NPs. The presence of elemental Cu and O in stoichiometric ratios in EDS spectra confirms the formation of both CuO and Cu2O NPs. In summary, CuO and Cu2O NPs were successfully synthesized by a sonochemical method using copper acetate as a precursor at different reducing agents. The bandgap of CuO and Cu2O NPs was 2.38 and 1.82, respectively. Furthermore, the phase purity critically depends on reducing agents.

scholarly journals Efficacy Assessment of Biosynthesized Copper Oxide Nanoparticles (CuO-NPs) on Stored Grain Insects and Their Impacts on Morphological and Physiological Traits of Wheat (Triticum aestivum L.) Plant

Biology ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 233
Author(s):  
Ali A. Badawy ◽  
Nilly A. H. Abdelfattah ◽  
Salem S. Salem ◽  
Mohamed F. Awad ◽  
Amr Fouda
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Triticum Aestivum L ◽  
Copper Oxide Nanoparticles ◽  
Rhyzopertha Dominica ◽  
Stored Grain ◽  
Stabilizing Agents ◽  
Cuo Nps ◽  
Vis Spectroscopy ◽  
Ft Ir

Herein, CuO-NPs were fabricated by harnessing metabolites of Aspergillus niger strain (G3-1) and characterized using UV–vis spectroscopy, XRD, TEM, SEM-EDX, FT-IR, and XPS. Spherical, crystallographic CuO-NPs were synthesized in sizes ranging from 14.0 to 47.4 nm, as indicated by TEM and XRD. EDX and XPS confirmed the presence of Cu and O with weight percentages of 62.96% and 22.93%, respectively, at varied bending energies. FT-IR spectra identified functional groups of metabolites that could act as reducing, capping, and stabilizing agents to the CuO-NPs. The insecticidal activity of CuO-NPs against wheat grain insects Sitophilus granarius and Rhyzopertha dominica was dose- and time-dependent. The mortality percentages due to NP treatment were 55–94.4% (S. granarius) and 70–90% (R. dominica). A botanical experiment was done in a randomized block design. Low CuO-NP concentration (50 ppm) caused significant increases in growth characteristics (shoot and root length, fresh and dry weight of shoot and root, and leaves number), photosynthetic pigments (total chlorophylls and carotenoids), and antioxidant enzymes of wheat plants. There was no significant change in carbohydrate or protein content. The use of CuO-NPs is a promising tool to control grain insects and enhance wheat growth performance.

scholarly journals Green copper oxide nanoparticles for lead, nickel, and cadmium removal from contaminated water

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alaa El Din Mahmoud ◽  
Khairia M. Al-Qahtani ◽  
Sahab O. Alflaij ◽  
Salma F. Al-Qahtani ◽  
Faten A. Alsamhan
Keyword(s):  
Experimental Data ◽  
Copper Oxide ◽  
Copper Oxide Nanoparticles ◽  
Bet Surface Area ◽  
Oxide Nanoparticles ◽  
Cadmium Removal ◽  
Cuo Nps ◽  
Pseudo Second Order ◽  
Isotherm And Kinetic Models ◽  
Lead Nickel

AbstractEnvironmentally friendly copper oxide nanoparticles (CuO NPs) were prepared with a green synthesis route without using hazardous chemicals. Hence, the extracts of mint leaves and orange peels were utilized as reducing agents to synthesize CuO NPs-1 and CuO NPs-2, respectively. The synthesized CuO NPs nanoparticles were characterized using scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDX), BET surface area, Ultraviolet–Visible spectroscopy (UV–Vis), and Fourier Transform Infrared Spectroscopy (FT-IR). Various parameters of batch experiments were considered for the removal of Pb(II), Ni(II), and Cd(II) using the CuO NPs such as nanosorbent dose, contact time, pH, and initial metal concentration. The maximum uptake capacity (qm) of both CuO NPs-1 and CuO NPs-2 followed the order of Pb(II) > Ni(II) > Cd(II). The optimum qm of CuO NPs were 88.80, 54.90, and 15.60 mg g−1 for Pb(II), Ni(II), and Cd(II), respectively and occurred at sorbent dose of 0.33 g L−1 and pH of 6. Furthermore, isotherm and kinetic models were applied to fit the experimental data. Freundlich models (R2 > 0.97) and pseudo-second-order model (R2 > 0.96) were fitted well to the experimental data and the equilibrium of metal adsorption occurred within 60 min.

scholarly journals Complexes of Copper and Iron with Pyridoxamine, Ascorbic Acid, and a Model Amadori Compound: Exploring Pyridoxamine’s Secondary Antioxidant Activity

Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 208
Author(s):  
Guillermo García-Díez ◽  
Roger Monreal-Corona ◽  
Nelaine Mora-Diez
Keyword(s):  
Antioxidant Activity ◽  
Ascorbic Acid ◽  
Rate Constant ◽  
Stable Complex ◽  
Aqueous Environment ◽  
Oh Radicals ◽  
Bidentate Ligands ◽  
Superoxide Radical Anion ◽  
Amadori Compound ◽  
The Stability

The thermodynamic stability of 11 complexes of Cu(II) and 26 complexes of Fe(III) is studied, comprising the ligands pyridoxamine (PM), ascorbic acid (ASC), and a model Amadori compound (AMD). In addition, the secondary antioxidant activity of PM is analyzed when chelating both Cu(II) and Fe(III), relative to the rate constant of the first step of the Haber-Weiss cycle, in the presence of the superoxide radical anion (O2•−) or ascorbate (ASC−). Calculations are performed at the M05(SMD)/6-311+G(d,p) level of theory. The aqueous environment is modeled by making use of the SMD solvation method in all calculations. This level of theory accurately reproduces the experimental data available. When put in perspective with the stability of various complexes of aminoguanidine (AG) (which we have previously studied), the following stability trends can be found for the Cu(II) and Fe(III) complexes, respectively: ASC < AG < AMD < PM and AG < ASC < AMD < PM. The most stable complex of Cu(II) with PM (with two bidentate ligands) presents a ΔGf0 value of −35.8 kcal/mol, whereas the Fe(III) complex with the highest stability (with three bidentate ligands) possesses a ΔGf0 of −58.9 kcal/mol. These complexes can significantly reduce the rate constant of the first step of the Haber-Weiss cycle with both O2•− and ASC−. In the case of the copper-containing reaction, the rates are reduced up to 9.70 × 103 and 4.09 × 1013 times, respectively. With iron, the rates become 1.78 × 103 and 4.45 × 1015 times smaller, respectively. Thus, PM presents significant secondary antioxidant activity since it is able to inhibit the production of ·OH radicals. This work concludes a series of studies on secondary antioxidant activity and allows potentially new glycation inhibitors to be investigated and compared relative to both PM and AG.

scholarly journals Adsorption Studies of Arsenic(V) by CuO Nanoparticles Synthesized by Phyllanthus emblica Leaf-Extract-Fueled Solution Combustion Synthesis

2021 ◽  
Vol 13 (4) ◽  
pp. 2017
Author(s):  
Sadia Saif ◽  
Syed F. Adil ◽  
Mujeeb Khan ◽  
Mohammad Rafe Hatshan ◽  
Merajuddin Khan ◽  
...  
Keyword(s):  
Leaf Extract ◽  
Solution Combustion Synthesis ◽  
Copper Oxide Nanoparticles ◽  
Maximum Adsorption Capacity ◽  
Phyllanthus Emblica ◽  
Adsorption Efficiency ◽  
Solution Combustion ◽  
X Ray ◽  
Cuo Nps ◽  
Crystalline Nature

In the present study, a simple and eco-friendly route for the synthesis of copper oxide nanoparticles (CuO NPs) using leaf extract of Phyllanthus emblica as fuel has been demonstrated, as P. emblica is a locally available abundant plant. The formation of the as-prepared CuO NPs was confirmed by using various techniques, such as UV–Vis absorption spectroscopy, cold field scanning electron microscopy (CF–SEM), energy dispersive X-ray analysis (EDX), dynamic light scattering (DLS), and X-ray photoelectron (XPS). The hydrodynamic size of the CuO NPs was found to be 80 nm, while the zeta potential of −28.6 mV was obtained. The elemental composition was confirmed by EDX analysis accompanied with elemental mapping, while the crystalline nature was substantiated by the XRD diffractogram. The as-synthesized CuO NPs were studied for their use as an adsorbent material for the removal of As(V) from water. It was confirmed that the CuO NPs effectively removed As(V) via adsorption, and the adsorption efficiency was found to be best at a higher pH. The maximum adsorption capacity of CuO for As(V) was found to be 1.17 mg/g calculated using the Langmuir equation.

scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Protein Fractions from an Aqueous Extract of Brown Algae Macrocystis pyrifera

Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 78
Author(s):  
Karla Araya-Castro ◽  
Tzu-Chiao Chao ◽  
Benjamín Durán-Vinet ◽  
Carla Cisternas ◽  
Gustavo Ciudad ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Copper Oxide ◽  
Green Synthesis ◽  
Aqueous Extract ◽  
Brown Algae ◽  
Copper Oxide Nanoparticles ◽  
Macrocystis Pyrifera ◽  
Protein Fractions ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Amongst different living organisms studied as potential candidates for the green synthesis of copper nanoparticles, algal biomass is presented as a novel and easy-to-handle method. However, the role of specific biomolecules and their contribution as reductant and capping agents has not yet been described. This contribution reports a green synthesis method to obtain copper oxide nanoparticles (CuO-NPs) using separated protein fractions from an aqueous extract of brown algae Macrocystis pyrifera through size exclusion chromatography (HPLC-SEC). Proteins were detected by a UV/VIS diode array, time-based fraction collection was carried out, and each collected fraction was used to evaluate the synthesis of CuO-NPs. The characterization of CuO-NPs was evaluated by Dynamic Light Scattering (DLS), Z-potential, Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS) detector. Low Molecular Weight (LMW) and High Molecular Weight (HMW) protein fractions were able to synthesize spherical CuO-NPs. TEM images showed that the metallic core present in the observed samples ranged from 2 to 50 nm in diameter, with spherical nanostructures present in all containing protein samples. FTIR measurements showed functional groups from proteins having a pivotal role in the reduction and stabilization of the nanoparticles. The highly negative zeta potential average values from obtained nanoparticles suggest high stability, expanding the range of possible applications. This facile and novel protein-assisted method for the green synthesis of CuO-NPs may also provide a suitable tool to synthesize other nanoparticles that have different application areas.

Sign in / Sign up

Export Citation Format

Share Document