scholarly journals Comparison of Methodologies for the Detection of Multiple Failures Using Acoustic Images in Fan Matrices

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Lara del Val ◽  
Alberto Izquierdo ◽  
Juan J. Villacorta ◽  
Luis Suárez
Keyword(s):  
Support Vector ◽  
Svm Classifier ◽  
Geometrical Parameters ◽  
The Third ◽  
Acoustic Images ◽  
The Matrix ◽  
Planar Array ◽  
Mems Microphones ◽  
Working Situation ◽  
Specific Working

This paper presents the comparison of three methodologies to detect if some fans in a matrix are not working properly. These methodologies are based on detecting fan failures by analysing acoustic images of the fan matrix, obtained using a planar array of MEMS microphones. Geometrical parameters of these acoustic images for different frequencies are then used to train a support vector machine (SVM) classifier, in order to detect the fan failures. One of the methodologies is based on the detection of the faulty fan in the matrix, under the hypothesis that only one fan can fail. Other methodology is based on the detection of the specific working situation of the matrix. And finally, the third methodology that is compared is based on determining individually if each of the fans of the matrix is working properly or not. The comparison shows that this third methodology is the most reliable.

scholarly journals Using a Planar Array of MEMS Microphones to Obtain Acoustic Images of a Fan Matrix

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Lara del Val ◽  
Alberto Izquierdo ◽  
Juan José Villacorta ◽  
Luis Suárez
Keyword(s):  
Microelectromechanical Systems ◽  
Processing System ◽  
Signal Acquisition ◽  
Acoustic Images ◽  
Mems Microphone ◽  
The Matrix ◽  
Planar Array ◽  
Mems Microphones ◽  
The Individual ◽  
Signal Acquisition And Processing

This paper proposes the use of a signal acquisition and processing system based on an8×8planar array of MEMS (Microelectromechanical Systems) microphones to obtain acoustic images of a fan matrix. A3×3matrix of PC fans has been implemented to perform the study. Some tests to obtain the acoustic images of the individual fans and of the whole matrix have been defined and have been carried out inside an anechoic chamber. The nonstationary signals received by each MEMS microphone and their corresponding spectra have been analyzed, as well as the corresponding acoustic images. The analysis of the acoustic signals spectra reveals the resonance frequency of the individual fans. The obtained results reveal the feasibility of the proposed system to obtained acoustic images of a fan matrix and of its individual fans, in this last case, in order to estimate the real position of the fan inside the matrix.

Binary Spectrum Feature for Improved Classifier Performance

2020 ◽  
Author(s):  
Nalika Ulapane ◽  
Karthick Thiyagarajan ◽  
sarath kodagoda
Keyword(s):  
Machine Learning ◽  
Classification Performance ◽  
Feature Reduction ◽  
Sensor Data ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Svm Classifier ◽  
Monitoring Task ◽  
Classifier Performance ◽  
Spectrum Feature

<div>Classification has become a vital task in modern machine learning and Artificial Intelligence applications, including smart sensing. Numerous machine learning techniques are available to perform classification. Similarly, numerous practices, such as feature selection (i.e., selection of a subset of descriptor variables that optimally describe the output), are available to improve classifier performance. In this paper, we consider the case of a given supervised learning classification task that has to be performed making use of continuous-valued features. It is assumed that an optimal subset of features has already been selected. Therefore, no further feature reduction, or feature addition, is to be carried out. Then, we attempt to improve the classification performance by passing the given feature set through a transformation that produces a new feature set which we have named the “Binary Spectrum”. Via a case study example done on some Pulsed Eddy Current sensor data captured from an infrastructure monitoring task, we demonstrate how the classification accuracy of a Support Vector Machine (SVM) classifier increases through the use of this Binary Spectrum feature, indicating the feature transformation’s potential for broader usage.</div><div><br></div>

Identification of Chronic Hypersensitivity Pneumonitis Biomarkers with Machine Learning and Differential Co-expression Analysis

2020 ◽  
Vol 20 ◽  
Author(s):  
Hongwei Zhang ◽  
Steven Wang ◽  
Tao Huang
Keyword(s):  
Feature Selection ◽  
Expression Analysis ◽  
Hypersensitivity Pneumonitis ◽  
Enrichment Analysis ◽  
Functional Enrichment ◽  
Great Promise ◽  
Support Vector ◽  
Svm Classifier ◽  
Clinical Tool ◽  
Chronic Hypersensitivity Pneumonitis

Aims: We would like to identify the biomarkers for chronic hypersensitivity pneumonitis (CHP) and facilitate the precise gene therapy of CHP. Background: Chronic hypersensitivity pneumonitis (CHP) is an interstitial lung disease caused by hypersensitive reactions to inhaled antigens. Clinically, the tasks of differentiating between CHP and other interstitial lungs diseases, especially idiopathic pulmonary fibrosis (IPF), were challenging. Objective: In this study, we analyzed the public available gene expression profile of 82 CHP patients, 103 IPF patients, and 103 control samples to identify the CHP biomarkers. Method: The CHP biomarkers were selected with advanced feature selection methods: Monte Carlo Feature Selection (MCFS) and Incremental Feature Selection (IFS). A Support Vector Machine (SVM) classifier was built. Then, we analyzed these CHP biomarkers through functional enrichment analysis and differential co-expression analysis. Result: There were 674 identified CHP biomarkers. The co-expression network of these biomarkers in CHP included more negative regulations and the network structure of CHP was quite different from the network of IPF and control. Conclusion: The SVM classifier may serve as an important clinical tool to address the challenging task of differentiating between CHP and IPF. Many of the biomarker genes on the differential co-expression network showed great promise in revealing the underlying mechanisms of CHP.

A fuzzy gaussian rank aggregation ensemble feature selection method for microarray data

2021 ◽  
Vol 24 (4) ◽  
pp. 289-301
Author(s):  
B. Venkatesh ◽  
J. Anuradha
Keyword(s):  
Feature Selection ◽  
Microarray Data ◽  
Classification Accuracy ◽  
Performance Metrics ◽  
Feature Selection Method ◽  
Selection Method ◽  
Support Vector ◽  
Svm Classifier ◽  
Binary Particle Swarm Optimization ◽  
Selection Methods

In Microarray Data, it is complicated to achieve more classification accuracy due to the presence of high dimensions, irrelevant and noisy data. And also It had more gene expression data and fewer samples. To increase the classification accuracy and the processing speed of the model, an optimal number of features need to extract, this can be achieved by applying the feature selection method. In this paper, we propose a hybrid ensemble feature selection method. The proposed method has two phases, filter and wrapper phase in filter phase ensemble technique is used for aggregating the feature ranks of the Relief, minimum redundancy Maximum Relevance (mRMR), and Feature Correlation (FC) filter feature selection methods. This paper uses the Fuzzy Gaussian membership function ordering for aggregating the ranks. In wrapper phase, Improved Binary Particle Swarm Optimization (IBPSO) is used for selecting the optimal features, and the RBF Kernel-based Support Vector Machine (SVM) classifier is used as an evaluator. The performance of the proposed model are compared with state of art feature selection methods using five benchmark datasets. For evaluation various performance metrics such as Accuracy, Recall, Precision, and F1-Score are used. Furthermore, the experimental results show that the performance of the proposed method outperforms the other feature selection methods.

scholarly journals The Primacy of High B-Value 3T-DWI Radiomics in the Prediction of Clinically Significant Prostate Cancer

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 739
Author(s):  
Alessandro Bevilacqua ◽  
Margherita Mottola ◽  
Fabio Ferroni ◽  
Alice Rossi ◽  
Giampaolo Gavelli ◽  
...  
Keyword(s):  
Prostate Cancer ◽  
Quantitative Imaging ◽  
B Value ◽  
Support Vector ◽  
Svm Classifier ◽  
Primary Role ◽  
High B Value ◽  
Wilcoxon Rank Sum Test ◽  
Apparent Diffusion ◽  
Clinically Significant

Predicting clinically significant prostate cancer (csPCa) is crucial in PCa management. 3T-magnetic resonance (MR) systems may have a novel role in quantitative imaging and early csPCa prediction, accordingly. In this study, we develop a radiomic model for predicting csPCa based solely on native b2000 diffusion weighted imaging (DWIb2000) and debate the effectiveness of apparent diffusion coefficient (ADC) in the same task. In total, 105 patients were retrospectively enrolled between January–November 2020, with confirmed csPCa or ncsPCa based on biopsy. DWIb2000 and ADC images acquired with a 3T-MRI were analyzed by computing 84 local first-order radiomic features (RFs). Two predictive models were built based on DWIb2000 and ADC, separately. Relevant RFs were selected through LASSO, a support vector machine (SVM) classifier was trained using repeated 3-fold cross validation (CV) and validated on a holdout set. The SVM models rely on a single couple of uncorrelated RFs (ρ < 0.15) selected through Wilcoxon rank-sum test (p ≤ 0.05) with Holm–Bonferroni correction. On the holdout set, while the ADC model yielded AUC = 0.76 (95% CI, 0.63–0.96), the DWIb2000 model reached AUC = 0.84 (95% CI, 0.63–0.90), with specificity = 75%, sensitivity = 90%, and informedness = 0.65. This study establishes the primary role of 3T-DWIb2000 in PCa quantitative analyses, whilst ADC can remain the leading sequence for detection.

scholarly journals Analog Circuit Fault Diagnosis Based on Support Vector Machine Classifier and Fuzzy Feature Selection

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1496
Author(s):  
Hao Liang ◽  
Yiman Zhu ◽  
Dongyang Zhang ◽  
Le Chang ◽  
Yuming Lu ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Mutual Information ◽  
Analog Circuit ◽  
Fault Classification ◽  
Support Vector ◽  
Svm Classifier ◽  
Fault Parameters ◽  
Diagnosis Method ◽  
Circuit Fault Diagnosis

In analog circuit, the component parameters have tolerances and the fault component parameters present a wide distribution, which brings obstacle to classification diagnosis. To tackle this problem, this article proposes a soft fault diagnosis method combining the improved barnacles mating optimizer(BMO) algorithm with the support vector machine (SVM) classifier, which can achieve the minimum redundancy and maximum relevance for feature dimension reduction with fuzzy mutual information. To be concrete, first, the improved barnacles mating optimizer algorithm is used to optimize the parameters for learning and classification. We adopt six test functions that are on three data sets from the University of California, Irvine (UCI) machine learning repository to test the performance of SVM classifier with five different optimization algorithms. The results show that the SVM classifier combined with the improved barnacles mating optimizer algorithm is characterized with high accuracy in classification. Second, fuzzy mutual information, enhanced minimum redundancy, and maximum relevance principle are applied to reduce the dimension of the feature vector. Finally, a circuit experiment is carried out to verify that the proposed method can achieve fault classification effectively when the fault parameters are both fixed and distributed. The accuracy of the proposed fault diagnosis method is 92.9% when the fault parameters are distributed, which is 1.8% higher than other classifiers on average. When the fault parameters are fixed, the accuracy rate is 99.07%, which is 0.7% higher than other classifiers on average.

scholarly journals Modelling of Amplitude Modulated Vocal Fry Glottal Area Waveforms Using an Analysis-by-Synthesis Approach

2021 ◽  
Vol 11 (5) ◽  
pp. 1990
Author(s):  
Vinod Devaraj ◽  
Philipp Aichinger
Keyword(s):  
Voice Quality ◽  
Low Frequency ◽  
Voice Disorder ◽  
Support Vector ◽  
Svm Classifier ◽  
Power Spectral ◽  
Analysis By Synthesis ◽  
Simple Support ◽  
Frequency Modulations ◽  
Synthesis Approach

The characterization of voice quality is important for the diagnosis of a voice disorder. Vocal fry is a voice quality which is traditionally characterized by a low frequency and a long closed phase of the glottis. However, we also observed amplitude modulated vocal fry glottal area waveforms (GAWs) without long closed phases (positive group) which we modelled using an analysis-by-synthesis approach. Natural and synthetic GAWs are modelled. The negative group consists of euphonic, i.e., normophonic GAWs. The analysis-by-synthesis approach fits two modelled GAWs for each of the input GAW. One modelled GAW is modulated to replicate the amplitude and frequency modulations of the input GAW and the other modelled GAW is unmodulated. The modelling errors of the two modelled GAWs are determined to classify the GAWs into the positive and the negative groups using a simple support vector machine (SVM) classifier with a linear kernel. The modelling errors of all vocal fry GAWs obtained using the modulating model are smaller than the modelling errors obtained using the unmodulated model. Using the two modelling errors as predictors for classification, no false positives or false negatives are obtained. To further distinguish the subtypes of amplitude modulated vocal fry GAWs, the entropy of the modulator’s power spectral density and the modulator-to-carrier frequency ratio are obtained.

scholarly journals Value of radiomics in differential diagnosis of chromophobe renal cell carcinoma and renal oncocytoma

2019 ◽  
Vol 45 (10) ◽  
pp. 3193-3201 ◽  
Author(s):  
Yajuan Li ◽  
Xialing Huang ◽  
Yuwei Xia ◽  
Liling Long
Keyword(s):  
Machine Learning ◽  
Differential Diagnosis ◽  
Cell Carcinoma ◽  
Area Under The Curve ◽  
Image Features ◽  
Renal Tumors ◽  
Support Vector ◽  
Svm Classifier ◽  
Renal Oncocytoma ◽  
Lasso Regression

Abstract Purpose To explore the value of CT-enhanced quantitative features combined with machine learning for differential diagnosis of renal chromophobe cell carcinoma (chRCC) and renal oncocytoma (RO). Methods Sixty-one cases of renal tumors (chRCC = 44; RO = 17) that were pathologically confirmed at our hospital between 2008 and 2018 were retrospectively analyzed. All patients had undergone preoperative enhanced CT scans including the corticomedullary (CMP), nephrographic (NP), and excretory phases (EP) of contrast enhancement. Volumes of interest (VOIs), including lesions on the images, were manually delineated using the RadCloud platform. A LASSO regression algorithm was used to screen the image features extracted from all VOIs. Five machine learning classifications were trained to distinguish chRCC from RO by using a fivefold cross-validation strategy. The performance of the classifier was mainly evaluated by areas under the receiver operating characteristic (ROC) curve and accuracy. Results In total, 1029 features were extracted from CMP, NP, and EP. The LASSO regression algorithm was used to screen out the four, four, and six best features, respectively, and eight features were selected when CMP and NP were combined. All five classifiers had good diagnostic performance, with area under the curve (AUC) values greater than 0.850, and support vector machine (SVM) classifier showed a diagnostic accuracy of 0.945 (AUC 0.964 ± 0.054; sensitivity 0.999; specificity 0.800), showing the best performance. Conclusions Accurate preoperative differential diagnosis of chRCC and RO can be facilitated by a combination of CT-enhanced quantitative features and machine learning.

scholarly journals Design of an SVM Classifier Assisted Intelligent Receiver for Reliable Optical Camera Communication

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4283
Author(s):  
Md.-Habibur Rahman ◽  
Md. Shahjalal ◽  
Moh. Khalid Hasan ◽  
Md.-Osman Ali ◽  
Yeong-Min Jang
Keyword(s):  
Light Emitting Diode ◽  
Characteristic Curve ◽  
Analysis Data ◽  
Image Sensor ◽  
Data Rate ◽  
Support Vector ◽  
Svm Classifier ◽  
High Data ◽  
Receiver System ◽  
Optical Camera Communication

Embedding optical camera communication (OCC) commercially as a favorable complement of radio-frequency technology has led to the desire for an intelligent receiver system that is eligible to communicate with an accurate light-emitting diode (LED) transmitter. To shed light on this issue, a novel scheme for detecting and recognizing data transmitting LEDs has been elucidated in this paper. Since the optically modulated signal is captured wirelessly by a camera that plays the role of the receiver for the OCC technology, the process to detect LED region and retrieval of exact information from the image sensor is required to be intelligent enough to achieve a low bit error rate (BER) and high data rate to ensure reliable optical communication within limited computational abilities of the most used commercial cameras such as those in smartphones, vehicles, and mobile robots. In the proposed scheme, we have designed an intelligent camera receiver system that is capable of separating accurate data transmitting LED regions removing other unwanted LED regions employing a support vector machine (SVM) classifier along with a convolutional neural network (CNN) in the camera receiver. CNN is used to detect every LED region from the image frame and then essential features are extracted to feed into an SVM classifier for further accurate classification. The receiver operating characteristic curve and other key performance parameters of the classifier have been analyzed broadly to evaluate the performance, justify the assistance of the SVM classifier in recognizing the accurate LED region, and decode data with low BER. To investigate communication performances, BER analysis, data rate, and inter-symbol interference have been elaborately demonstrated for the proposed intelligent receiver. In addition, BER against distance and BER against data rate have also been exhibited to validate the effectiveness of our proposed scheme comparing with only CNN and only SVM classifier based receivers individually. Experimental results have ensured the robustness and applicability of the proposed scheme both in the static and mobile scenarios.

scholarly journals Classification of SSVEP-based BCIs using Genetic Algorithm

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Hamideh Soltani ◽  
Zahra Einalou ◽  
Mehrdad Dadgostar ◽  
Keivan Maghooli
Keyword(s):  
Genetic Algorithm ◽  
Dimension Reduction ◽  
Classification Accuracy ◽  
Bayesian Method ◽  
Computer Interface ◽  
Support Vector ◽  
Svm Classifier ◽  
Effective Dimension ◽  
Effective Dimension Reduction

AbstractBrain computer interface (BCI) systems have been regarded as a new way of communication for humans. In this research, common methods such as wavelet transform are applied in order to extract features. However, genetic algorithm (GA), as an evolutionary method, is used to select features. Finally, classification was done using the two approaches support vector machine (SVM) and Bayesian method. Five features were selected and the accuracy of Bayesian classification was measured to be 80% with dimension reduction. Ultimately, the classification accuracy reached 90.4% using SVM classifier. The results of the study indicate a better feature selection and the effective dimension reduction of these features, as well as a higher percentage of classification accuracy in comparison with other studies.

Sign in / Sign up

Export Citation Format

Share Document