scholarly journals Parametric Study on the Ground Control Effects of Rock Bolt Parameters under Dynamic and Static Coupling Loads

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zequan Sun ◽  
Lishuai Jiang ◽  
Jinquan Jiang ◽  
Xingyu Wu ◽  
Naser Golsanami ◽  
...  
Keyword(s):  
Static Load ◽  
Ground Deformation ◽  
Surrounding Rock ◽  
Underground Engineering ◽  
Effective Measure ◽  
Support Mechanism ◽  
Working Face ◽  
Cyclic Operation ◽  
The Stability ◽  
Ground Stability

Dynamic and static coupling loads (DSLs) are one of the most common stress environments in underground engineering. As the depth of a roadway increases over the life of a mine, the static load of the ground stress field increase multiplies, and the cyclic operation at the working face releases a large amount of dynamic energy. Therefore, deep roadways easily induce dynamic disasters during production. In this paper, a deep roadway numerical model was built with FLAC3D to test the deep roadway under DSLs and was simulated with 16 different support designs. The ground stability in each support condition was examined and compared in terms of the ground deformation and scope of failure. The underlying support mechanism was further analyzed with numerical modeling in view of the deformation in the surrounding rock mass induced by variations in the support parameters. The results show that shortening the bolt spacing is an effective measure to control the deformation of surrounding rock whatever DSLs or static load. Under static load, the larger the anchoring length is, the more stable the surrounding rock is. Under DSLs, end grouting length (S = 600 mm) and full grouting length (S = 1800 mm) can effectively control the deformation of surrounding rocks and enhance the stability of surrounding rocks. The results contribute to the design of supports in the field of underground coal mines and provide a basis for determining the reasonable support scheme for roadways.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

scholarly journals The Stability of Gob-Side Entry Retaining in a High-Gas-Risk Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Junwen Zhang ◽  
Yulin Li
Keyword(s):  
Coal Mines ◽  
Surrounding Rock ◽  
Shanxi Province ◽  
Engineering Practice ◽  
Efficient Production ◽  
Coal Recovery ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability ◽  
Strengthening Technique

There are series of problems faced by most of the coal mines in China, ranging from low-coal recovery rate and strained replacement of working faces to gas accumulation in the upper corner of coalfaces. Based on the gob-side entry retaining at the No. 18205 working face in a coal mine in Shanxi Province, theoretical analysis, numerical simulation, and engineering practice were comprehensively used to study the mechanical characteristics of the influence of the width of the filling body beside the roadway and the stability of surrounding rock in a high-gas-risk mine. The rational width of the filling body beside the roadway was determined, and a concrete roadway-side support with a headed reinforcement-integrated strengthening technique was proposed, which have been applied in engineering practice. The stability of the filling body beside the roadway is mainly influenced by the movement of the overlying rock strata, and the stability of the surrounding rock can be improved effectively by rationally determining the width of the filling body beside the roadway. When the width of the roadway-side filling body is 2.5 m, the surrounding rock convergence of the gob-side entry retaining is relatively small at only 5% of the convergence ratio. It has been shown that the figure for roof separation is relatively low, and strata behaviors are relatively alleviated and gas density do not exceed the limit, which are the best results of gob-side entry retaining. The results of this research can provide theoretical guidance for excavation of coal mines with similar geological conditions and have some referential significance to safety and efficient production in coal mines.

scholarly journals The Research on Stability of Surrounding Rock in Gob-side Entry Driving in Deep and Thick Seam

2021 ◽  
Author(s):  
jianjun SHI ◽  
Feng Jicheng ◽  
Peng Rui ◽  
Zhu Quanjie
Keyword(s):  
Stability Study ◽  
Surrounding Rock ◽  
Support Pressure ◽  
Thick Coal Seam ◽  
Thick Seam ◽  
Working Face ◽  
Pressure Area ◽  
Roadway Support ◽  
The Stability ◽  
Bolt Steel

Abstract The gob-side entry driving is driving in low pressure area, which bears less support pressure and is easy to maintain, so it is widely used. Taking the gob-side entry driving in thick coal seam of Dongtan Coal Mine as an example, the reasonable size of pillar and the section of roadway are numerically simulated by combining numerical with measurement, and the roadway support is designed. According to the distribution of lateral stress in working face, eight pillars of different sizes are designed. By simulating and comparing the stress distribution of surrounding rock and the development range and shape of plastic zone in different positions, the pillar size of gob-side entry driving is optimized to be 4.5m. According to the results of optimization of roadway section, the section of straight wall semi-circular arch roadway is adopted. According to the analysis, the roadway is supported by bolt + steel mesh + anchor cable. By observing the stability of roadway, it provides experience for the stability study of roadway the gob-side entry driving with small pillar in thick seam.

scholarly journals An Innovative Elastoplastic Analysis for Soft Surrounding Rock considering Supporting Opportunity Based on Drucker-Prager Strength Criterion

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Rui Wang ◽  
Xu-dong Liu ◽  
Jian-biao Bai ◽  
Shuai Yan ◽  
Jun Xu
Keyword(s):  
Strength Criterion ◽  
Homogenization Method ◽  
Surrounding Rock ◽  
Theoretical Research ◽  
Underground Engineering ◽  
Support Design ◽  
Interval Distance ◽  
Space Effect ◽  
The Stability ◽  
Supporting Condition

In order to study the mechanism of excavation and supporting process of equivalent circular roadway, the model of soft roadway was established firstly. The elastoplastic solutions in excavation process were deduced based on Drucker-Prager strength criterion. Then, the elastoplastic solution under supporting condition was obtained based on homogenization method under the condition of rockbolts and liner supporting. Lastly, an example was analyzed to study the effect of different factors such as “space effect,” supporting opportunity, stresses, surrounding displacement, and the radius of plastic zone. Based on theoretical research case, the change rules of considering the “space effect” and the supporting opportunity when calculating the subarea of the roadway were discussed, the control of interval distance of rockbolts on the displacement of surrounding rock mainly reflecting in the plastic residual zone and the “space effect” in excavation, and the supporting time to control the displacement of surrounding rock not being ignored are revealed. The results can provide an important theoretical basis for the stability evaluation and quantitative support design of roadway surrounding rock. Therefore, the “space effect” and the supporting time to control the displacement and stresses of surrounding rock can not being ignored in underground engineering.

scholarly journals Failure behavior of the surrounding rock of jointed rock masses in a gold mine under impact disturbance

2021 ◽  
Author(s):  
Peng Li ◽  
Yunquan Wu ◽  
Meifeng Cai
Keyword(s):  
Stress Wave ◽  
Shear Failure ◽  
Jointed Rock ◽  
Surrounding Rock ◽  
Tensile Failure ◽  
Tensile Shear ◽  
Underground Engineering ◽  
Impact Stress ◽  
The Stability ◽  
The Impact

Abstract The impact disturbance has an important influence on the safety of underground engineering openings. In this paper, based on the in-situ stress measurement and structural plane investigation, the model of jointed rock roadway was established using the discrete element method (3DEC) to study the instability and failure characteristic of roadway surrounding rock with dominant joint planes under impact disturbance and to further analyze the influence of different buried depths, impact stress wave peaks, and stress wave delays on the stability of the surrounding rock. The results show that the stability of the surrounding rock is poor, and the whole convergence deformation of the surrounding rock occurs under the impact stress wave. There are three failure modes in the surrounding rock: tensile-shear failure, tensile failure, and shear failure. Tensile-shear failure mainly occurs in a small range close to the roof and floor of the roadway and the free surfaces of the two sides, and tensile failure occurs locally, while shear failure mainly occurs along the joint plane outside this range. Moreover, the greater the buried depth and stress wave peak value, the more serious the deformation of the surrounding rock. With the increase of stress wave delay, the deformation of the surrounding rock shows complex characteristics. In addition, the impact failure mechanism of the surrounding rock in jointed rock masses was discussed. The research results have important guiding significance for the prevention and control of underground engineering cavern disasters.

scholarly journals The Stability Analysis of Roadway near Faults under Complex High Stress

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Biao Zhang ◽  
Huaqiang Zhou ◽  
Qingliang Chang ◽  
Xu Zhao ◽  
Yuantian Sun
Keyword(s):  
Abutment Pressure ◽  
High Stress ◽  
Peak Stress ◽  
Surrounding Rock ◽  
Distribution Law ◽  
Fault Structure ◽  
Supporting Pressure ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability

Based on geological conditions of 3318 working face haulage roadway in Xuchang Coal Mine, as well as the space-time relationship with surrounding gob, theoretical analysis and numerical simulation were used to study the influence of fault structure on the original rock stress of 3318 working face transport roadway. Considering the composite action of the leading supporting pressure of 3318 working face and the structure and the lateral supporting pressure of gob, the stress distribution and deformation law of roadway under the complex and high-stress condition are studied. The results show that, under the superposition of lateral abutment pressure of goaf and abutment pressure of adjacent working face and fault structure, the peak stress of roadway roof and floor moves to the surface of roadway surrounding rock, and its distribution law changes from obvious symmetry to asymmetry; surrounding rock on both sides of roadway forms asymmetric circular concentrated stress area; roof and floor and two sides of roadway show asymmetric characteristics. This reveals the stability characteristics of roadway surrounding rock under the action of multiple perturbation stresses.

scholarly journals Numerical Simulation of Stress Arching Effect in Horizontally Layered Jointed Rock Mass

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1138
Author(s):  
Xiao Huang ◽  
Huaining Ruan ◽  
Chong Shi ◽  
Yang Kong
Keyword(s):  
Rock Mass ◽  
Pressure Coefficient ◽  
Jointed Rock ◽  
Jointed Rock Mass ◽  
Surrounding Rock ◽  
Beam Structure ◽  
Underground Engineering ◽  
Joint Spacing ◽  
Arching Effect ◽  
The Stability

Stress arching effect during the excavation of broken surrounding rock in underground engineering has an important influence on the stability of surrounding rock after underground excavation. To determine the stress arching effect in horizontally layered jointed rock mass, the stress arching characteristics of surrounding rock mass after excavation is analyzed in this study by using a series of numerical tests. The formation mechanism of stress arch is revealed through a comparison of the stress characteristics of a voussoir beam structure and theoretical analysis of multi-block mechanical relationship of jointed rock mass. The method for determining the boundaries of a stress arching zone is proposed, and the influence of various factors on a stress arch is further discussed. Results show that after the excavation of horizontally layered jointed rock mass, the stress arch bunch (SAB) is formed in the lower strata above the cavern, and the global stress arch (GSA) is formed in the higher strata, both of which are symmetrical arch stress patterns. The SAB is the mechanical manifestation of the voussoir beam structure formed by several low-level sandstone layers, and the GSA is caused by the uneven displacement between blocks. Compared with the GSA, the SAB is more sensitive to various influencing factors. The extent of stress arching zone decreases with the increase of an internal friction angle of the joint, lateral pressure coefficient, and overburden depth. In addition, the joint spacing of rock strata is conducive to the development of a stress arch. Results can provide technical support for deformation control and the stability analysis of broken surrounding rock in underground engineering.

Study of the Trellis Support of Working Face Roadway in Impact Coal Seam

2014 ◽  
Vol 941-944 ◽  
pp. 2558-2564
Author(s):  
Yu Kai Lv ◽  
Cong Jiang ◽  
Yao Dong Jiang
Keyword(s):  
In Situ Stress ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Working Face ◽  
Coal Bumps ◽  
Roadway Support ◽  
The Stability ◽  
The Impact ◽  
Physical And Mechanical Characteristics

Coal bumps happened many times in mining at No.5 seam of Tangshan coal mine. Strengthen the roadway’s support of working face can effectively reduce disaster losses. With the research background of the 3654 working face, the mine pressure monitoring for the existing support form of roadway has been carried on. Perform a numerical simulation for the original roadway support, base on the in-situ stress and physical and mechanical characteristics of surrounding rock in experimental; study the impact of the stability of roadway’s surrounding rock, while the space change of trellis and change of supporting intensity; optimizing the original support form, so as to maximum reducing the impact of the coal bumps.

scholarly journals Reasonable Layout of Roadway Based on PSO-AHP Optimization Algorithm Under Three-Dimensional Stress Field

2021 ◽  
Author(s):  
Hongbao Zhao ◽  
Hui Cheng ◽  
Chi Zhang ◽  
Yixiao Zhang
Keyword(s):  
Stress Field ◽  
Optimization Algorithm ◽  
Three Dimensional ◽  
Surrounding Rock ◽  
Deviatoric Stress ◽  
Analytic Hierarchy ◽  
Working Face ◽  
Dip Angle ◽  
The Stability ◽  
Hierarchy Process

Abstract Reasonable roadway layout is the fundamental measure to reduce the difficulty of roadway support and improve the stability of surrounding rock. The particle swarm optimization and analytic hierarchy process (PSO-AHP) algorithm of reasonable layout of roadway under the three-dimensional field was proposed, and an engineering verification was carried out in Weijiadi coal mine. The results showed that, The dip angle α1 and azimuth angle α2 affect the distribution of the deviatoric stress of the roadway surrounding rock. Under different stress field, the sensitivity of surrounding rock to α1 and α2 are different. Changing the more sensitive layout parameters can minimize the deviatoric stress and improve the stability of roadway. The PSO-AHP optimization algorithm takes the deviatoric stress as the index to calculate the layout parameters of different parts of the roadway, and then determines the optimal layout parameters through the evaluation function. The roadway of 1104 working face was arranged with the optimal parameters obtained by PSO-AHP optimization algorithm. Compared with the original layout scheme, the deviatoric stress of surrounding rock was reduced and the position of maximum deviatoric stress is transferred. The optimum layout of roadway was combined with an asymmetric support which had a good application effect.

Sign in / Sign up

Export Citation Format

Share Document