scholarly journals Optimal Allocation of Combined Renewable Distributed Generation and Capacitor Units for Interconnection Cost Reduction

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Saad Ouali ◽  
Abdeljebbar Cherkaoui
Keyword(s):  
Distributed Generation ◽  
Network Topology ◽  
Distribution System ◽  
Optimal Allocation ◽  
Reactive Power ◽  
Distribution Networks ◽  
Cost Evaluation ◽  
Renewable Generation ◽  
Voltage Distribution ◽  
Medium Voltage

In this paper, a new methodology for the optimal investment in distributed generation is presented, based on an optimal allocation of combined DG and capacitor units to alleviate network voltage constraints and reduce the interconnection cost of renewable generation integration in public medium voltage distribution networks. An analytical optimization method is developed, with the inclusion of practical considerations that are typically neglected in developed works: network topology reconfiguration and the geographical data of the generation land-use and network infrastructure. Powerful results concluded from a sensitivity analysis study of the most impacted parts of the network by the variation of active and reactive power injection under network topology reconfiguration are used as a basis for capacitor units placement. A case study, with two meshed IEEE 15-bus feeders and a new DG to connect, geographical dispersed, are used to simulate the performance of the proposed approach. A cost evaluation of the obtained results proves the effectiveness of the proposed approach to reduce the required charges for connecting new renewable generation units in medium voltage distribution system.

Swarm-Intelligence-Based Optimal Placement and Sizing of Distributed Generation in Distribution Network

2018 ◽  
pp. 29-48 ◽  
Author(s):  
Mahesh Kumar ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Pandian Vasant ◽  
Luqman Hakim Rahman
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Distribution Network ◽  
Stability Index ◽  
Pso Algorithm ◽  
Distribution Networks ◽  
Optimal Placement

In the distribution system, distributed generation (DG) are getting more important because of the electricity demands, fossil fuel depletion and environment concerns. The placement and sizing of DGs have greatly impact on the voltage stability and losses in the distribution network. In this chapter, a particle swarm optimization (PSO) algorithm has been proposed for optimal placement and sizing of DG to improve voltage stability index in the radial distribution system. The two i.e. active power and combination of active and reactive power types of DGs are proposed to realize the effect of DG integration. A specific analysis has been applied on IEEE 33 bus system radial distribution networks using MATLAB 2015a software.

scholarly journals Optimal Allocation of Capacitor Bank for Loss Minimization and Voltage Improvement Using Analytical Method

SCITECH Nepal ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 1-7
Author(s):  
Avinash Khatri KC ◽  
Tika Ram Regmi
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Optimal Allocation ◽  
Reactive Power ◽  
Capacitor Bank ◽  
Minimum Cost ◽  
Distribution Networks ◽  
Standard Test ◽  
Load Flow ◽  
Voltage Profile

An electric distribution system plays an important role in achieving satisfactory power supply. The quality of power is measured by voltage stability and profile of voltage. The voltage profile is affected by the losses in distribution system. As the load is mostly inductive on the distribution system and requires large reactive power, most of the power quality problems can be resolved with requisite control of reactive power. Capacitors are often installed in distribution system for reactive power compensation. This paper presents two stage procedures to identify the location and size of capacitor bank. In the first stage, the load flow is carried out to find the losses of the system using sweep algorithm. In the next stage, different size of capacitors are initialized and placed in each possible candidate bus and again load flow for the system is carried out. The objective function of the cost incorporating capacitor cost and loss cost is formulated constrained with voltage limits. The capacitor with the minimum cost is selected as the optimized solution. The proposed procedure is applied to different standard test systems as 12-bus radial distribution systems. In addition, the proposed procedure is applied on a real distribution system, a section of Sallaghari Feeder of Thimi substation. The voltage drops and power loss before and after installing the capacitor were compared for the system under test in this work. The result showed better voltage profiles and power losses of the distribution system can be improved by using the proposed method and it can be a benefit to the distribution networks.

Location and Size of Distributed Generation Using Ant Colony Optimization

2014 ◽  
Vol 492 ◽  
pp. 460-466 ◽  
Author(s):  
Jorge Mendoza ◽  
Miguel López ◽  
Allison Delgado
Keyword(s):  
Ant Colony Optimization ◽  
Distributed Generation ◽  
Electricity Generation ◽  
Recent Trend ◽  
Optimization Technique ◽  
Distribution Networks ◽  
Ant Colony ◽  
Energy Sources ◽  
Voltage Distribution ◽  
Medium Voltage

Distributed generation (DG) is a recent trend of electricity generation, which aims to use various energy sources to inject electric power in a distributed manner at points close to the load. This paper develops an optimization model to choose the sizes and positions of DG in medium voltage distribution networks in order to minimize the power system losses, given a set of constraints. Ant Colony Optimization (ACO) was used as optimization technique, with excellent results.

scholarly journals Compliance of Distribution System Reactive Flows with Transmission System Requirements

2021 ◽  
Vol 11 (16) ◽  
pp. 7719
Author(s):  
Panagiotis Pediaditis ◽  
Katja Sirviö ◽  
Charalampos Ziras ◽  
Kimmo Kauhaniemi ◽  
Hannu Laaksonen ◽  
...  
Keyword(s):  
Distribution System ◽  
Reactive Power ◽  
Real Data ◽  
Distribution Networks ◽  
Transmission System ◽  
Distributed Energy ◽  
Medium Voltage ◽  
Power Set ◽  
System Requirements ◽  
Advanced Model

Transmission system operators (TSOs) often set requirements to distribution system operators (DSOs) regarding the exchange of reactive power on the interface between the two parts of the system they operate, typically High Voltage and Medium Voltage. The presence of increasing amounts of Distributed Energy Resources (DERs) at the distribution networks complicates the problem, but provides control opportunities in order to keep the exchange within the prescribed limits. Typical DER control methods, such as constant cosϕ or Q/V functions, cannot adequately address these limits, while power electronics interfaced DERs provide to DSOs reactive power control capabilities for complying more effectively with TSO requirements. This paper proposes an optimisation method to provide power set-points to DERs in order to control the hourly reactive power exchanges with the transmission network. The method is tested via simulations using real data from the distribution substation at the Sundom Smart Grid, in Finland, using the operating guidelines imposed by the Finnish TSO. Results show the advantages of the proposed method compared to traditional methods for reactive power compensation from DERs. The application of more advanced Model Predictive Control techniques is further explored.

Sign in / Sign up

Export Citation Format

Share Document