scholarly journals Polyethylene and Polyvinyl Chloride-Blended Polystyrene Nanofibrous Sorbents and Their Application in the Removal of Various Oil Spills

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Mohamed. A. Alnaqbi ◽  
Afra G. Al Blooshi ◽  
Yaser E. Greish

Polymers provide a wide range of properties, and these properties can be greatly enhanced and modified through polymer blending. Polymer blending combines the properties and advantages of their original polymers. This paper showcases hydrophobic polymers prepared through polymer blending; these blends are characterized and evaluated for their efficiency in the removal of crude oil spills from aqueous media. The application of these blends holds a great deal of importance in preserving the environment and the recovery of lost oil in spills. The blends are produced using polystyrene (PS) as the matrix polymer and individually blending poly(vinyl chloride) (PVC) and polyethylene (PE) with the PS consisting of proportions of 5–20 wt.% each. The blends are then electrospun into bead-free microfibers with interconnected porosities as shown by their respective scanned electron micrographs. All fibrous sorbents showed a high affinity towards the removal of crude oil, motor oil, and diesel spills. The highly viscous motor spill showed a different pattern of sorption onto fibers than that of crude oil and diesel spills. Upon comparing all the studied electrospun fibers to commercially available polypropylene fibrous sorbents, results show that the sorption efficiency of the electrospun fibers is superior. Most notably, both PS-PE5 and PS-PVC5 fibers showed to be highly more effective than commercially available polypropylene (PP) sorbents towards all types of oil spills.

1996 ◽  
Vol 34 (10) ◽  
pp. 187-193 ◽  
Author(s):  
Suneel Chhatre ◽  
Hemant Purohit ◽  
Rishi Shanker ◽  
Purushottam Khanna

Oil spills generate enourmous public concern and highlight the need for cost effective and environmentally acceptable mitigation technologies. Physico-chemical methods are not completely effective after a spill. Hence, there is a need for improved and alternative technologies. Bioremediation is the most environmentally sound technology for clean up. This report intends to determine the potential of a bacterial consortium for degradation of Gulf and Bombay High crude oil. A number of bacteria were isolated from an acclimated semicontinuous reactor fed with crude oil. A four membered consortium was designed that could degrade 70% of the crude oil. A member of consortium produced a biosurfactant, rhamnolipid, that emulsified crude oil efficiently for effective degradation by the other members of consortium. The wide range of hydrocarbonoclastic capabilities of the selected members of bacterial consortium leads to the degradation of both aromatic and aliphatic fractions of crude oil in 72 hours.


2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.


1975 ◽  
Vol 10 (1) ◽  
pp. 73-83
Author(s):  
J.E.S. Graham ◽  
T.C. Hutchinson

Abstract Crude oil spills are increasingly likely to occur from drilling, pumping and transportation activities as oil development proceeds at a rapid pace. These spills may occur over the wide range of climatic conditions which obtain in Canada. Little is known of oil toxicity at different temperatures; consequently, laboratory studies were made of the variability of the toxicity of aqueous extracts of a Norman Wells crude oil to freshwater algae over the temperature range 5°C to 35°C. Two unicellular green algae were studied: Chlamydomonas eugametos and Chlorella vulgaris. Their response (measured by cell numbers) varied with temperature and species. Whereas Chlamydomonas eugametos showed a general pattern of growth inhibition by oil at all temperatures with maximum inhibition at 25°C, Chlorella vulgaris showed general growth stimulation by oil with maximum stimulation at 25°C, this temperature was chosen for all further experimentation. All experiments were done using unialgal cultures and sterile technique. Cells were grown in 50 ml of nutrient medium (BBM) in 125 ml Erlenmeyer flasks. Such flasks allow gas exchange and permit loss of volatile hydrocarbons. Aqueous extracts were made by slowly stirring 5% crude oil with the nutrient medium for six hours using a magnetic mixer. The extract was then allowed to sit for two to four hours before the lower fraction was drawn off for use. Experiments were carried out in controlled environment chambers (±2°C) with a twelve hour light-dark cycle. All further experiments used a similar methodology. (Note: Chlamydomonas eugametos experiments were carried out on a rotary shaker at 125 rpm.) An attempt was made to determine the reason for the remarkable stimulation in growth of Chlorella vulgaris #29 at 25°C. This organism has been described in the literature as heterotrophic. Thus three reasons for stimulation seemed possible: 1. heterotrophic uptake of hydrocarbons directly from solution; 2. heterotrophic uptake of organic compounds formed or released by microbial breakdown of hydrocarbons (the aqueous extract of crude was not sterile); or 3. the use of CO2 released to solution by microbial respiration. The original experiment was repeated in the dark at 20°C to determine if stimulation still occurred. It did not, since cells exposed to the aqueous extract decreased in numbers. However, after two weeks the cells were illuminated and even though experimental flasks started off with depleted populations, they outgrew the control cells within two weeks. This suggested that if stimulation was related to heterotrophism, it must, at least in this case, have been the unusual case of photoheterotrophism. The reasons for this stimulation of growth are currently under investigation. Several methods are being employed to investigate the suspected heterotrophism. Experiments will be done to determine whether light energy is essential to the stimulation. Two varieties of Chlorella vulgaris, i.e. #29 and #260 are heterotrophic and autotrophic respectively, are to be used in experiments. Sterile aqueous extracts made by pressure ultrafiltration will be used. These experiments should determine whether algal growth stimulation is related to heterotrophism or whether microbial degradation of hydrocarbons is the real source of stimulation. Although the toxicity of crude oil may be rapidly ameliorated by physical and/or biological phenomena, one must still be aware of the possibility of a large input of organic carbon causing extensive eutrophication. Thus both toxicity and eutrophication will cause a selection, in terms of survival, in a natural environment. It is evident that although an oil spill may not totally destroy an ecosystem, it will certainly alter its natural composition considerably.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 844
Author(s):  
Joanna Czogała ◽  
Ewa Pankalla ◽  
Roman Turczyn

This paper reviews the current trends in replacing commonly used plasticizers in poly(vinyl chloride), PVC, formulations by new compounds with reduced migration, leading to the enhancement in mechanical properties and better plasticizing efficiency. Novel plasticizers have been divided into three groups depending on the replacement strategy, i.e., total replacement, partial replacement, and internal plasticizers. Chemical and physical properties of PVC formulations containing a wide range of plasticizers have been compared, allowing observance of the improvements in polymer performance in comparison to PVC plasticized with conventionally applied bis(2-ethylhexyl) phthalate, di-n-octyl phthalate, bis(2-ethylhexyl) terephthalate and di-n-octyl terephthalate. Among a variety of newly developed plasticizers, we have indicated those presenting excellent migration resistance and advantageous mechanical properties, as well as those derived from natural sources. A separate chapter has been dedicated to the description of a synergistic effect of a mixture of two plasticizers, primary and secondary, that benefits in migration suppression when secondary plasticizer is added to PVC blend.


Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 548 ◽  
Author(s):  
Leonid Agureev ◽  
Valeriy Kostikov ◽  
Zhanna Eremeeva ◽  
Svetlana Savushkina ◽  
Boris Ivanov ◽  
...  

The article presents the study of alumina nanoparticles’ (nanofibers) concentration effect on the strength properties of pure nickel. The samples were obtained by spark plasma sintering of previously mechanically activated metal powders. The dependence of the grain size and the relative density of compacts on the number of nanofibers was investigated. It was found that with an increase in the concentration of nanofibers, the average size of the matrix particles decreased. The effects of the nanoparticle concentration (0.01–0.1 wt.%) on the elastic modulus and tensile strength were determined for materials at 25 °C, 400 °C, and 750 °C. It was shown that with an increase in the concentration of nanofibers, a 10–40% increase in the elastic modulus and ultimate tensile strength occurred. A comparison of the mechanical properties of nickel in a wide range of temperatures, obtained in this work with materials made by various technologies, is carried out. A description of nanofibers’ mechanisms of influence on the structure and mechanical properties of nickel is given. The possible impact of impurity phases on the properties of nickel is estimated. The tendency of changes in the mechanical properties of nickel, depending on the concentration of nanofibers, is shown.


2020 ◽  
Vol 20 (1) ◽  
Author(s):  
Vincent Vandewalle ◽  
Alexandre Caron ◽  
Coralie Delettrez ◽  
Renaud Périchon ◽  
Sylvia Pelayo ◽  
...  

Abstract Background Usability testing of medical devices are mandatory for market access. The testings’ goal is to identify usability problems that could cause harm to the user or limit the device’s effectiveness. In practice, human factor engineers study participants under actual conditions of use and list the problems encountered. This results in a binary discovery matrix in which each row corresponds to a participant, and each column corresponds to a usability problem. One of the main challenges in usability testing is estimating the total number of problems, in order to assess the completeness of the discovery process. Today’s margin-based methods fit the column sums to a binomial model of problem detection. However, the discovery matrix actually observed is truncated because of undiscovered problems, which corresponds to fitting the marginal sums without the zeros. Margin-based methods fail to overcome the bias related to truncation of the matrix. The objective of the present study was to develop and test a matrix-based method for estimating the total number of usability problems. Methods The matrix-based model was based on the full discovery matrix (including unobserved columns) and not solely on a summary of the data (e.g. the margins). This model also circumvents a drawback of margin-based methods by simultaneously estimating the model’s parameters and the total number of problems. Furthermore, the matrix-based method takes account of a heterogeneous probability of detection, which reflects a real-life setting. As suggested in the usability literature, we assumed that the probability of detection had a logit-normal distribution. Results We assessed the matrix-based method’s performance in a range of settings reflecting real-life usability testing and with heterogeneous probabilities of problem detection. In our simulations, the matrix-based method improved the estimation of the number of problems (in terms of bias, consistency, and coverage probability) in a wide range of settings. We also applied our method to five real datasets from usability testing. Conclusions Estimation models (and particularly matrix-based models) are of value in estimating and monitoring the detection process during usability testing. Matrix-based models have a solid mathematical grounding and, with a view to facilitating the decision-making process for both regulators and device manufacturers, should be incorporated into current standards.


2010 ◽  
Vol 649 ◽  
pp. 101-106
Author(s):  
Mária Svéda ◽  
Dóra Janovszky ◽  
Kinga Tomolya ◽  
Jenő Sólyom ◽  
Zoltán Kálazi ◽  
...  

The aim of our research was to comparatively examine Ni content surface layers on amorphisable Cu base alloy produced by different laser surface treatments. Laser surface treatment (LST) techniques, such as laser surface melting, laser alloying and laser cladding, provide a wide range of interesting solutions for the production of wear and corrosion resistant surfaces. [1,2] With LST techniques, the surface can be: i) coated with a layer of another material by laser cladding, ii) the composition of the matrix can be modified by laser alloying. [3] Two kinds of laser surface treatment technologies were used. In the case of coating-melting technology a Ni content surface layer was first developed by galvanization, and then the Ni content layer was melted together with the matrix. In the case of powder blowing technology Ni3Al powder was blown into the layer melted by laser beam and Argon gas. LST was performed using an impulse mode Nd:YAG laser. The laser power and the interaction time were 2 kW and 20÷60 ms. The characterization of the surface layer microstructure was performed by XRD, scanning electron microscopy and microhardness measurements.


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1583
Author(s):  
Natalia Guerrero-Alburquerque ◽  
Shanyu Zhao ◽  
Daniel Rentsch ◽  
Matthias M. Koebel ◽  
Marco Lattuada ◽  
...  

Ureido-functionalized compounds play an indispensable role in important biochemical processes, as well as chemical synthesis and production. Isocyanates, and KOCN in particular, are the preferred reagents for the ureido functionalization of amine-bearing compounds. In this study, we evaluate the potential of urea as a reagent to graft ureido groups onto amines at relatively low temperatures (<100 °C) in aqueous media. Urea is an inexpensive, non-toxic and biocompatible potential alternative to KOCN for ureido functionalization. From as early as 1864, urea was the go-to reagent for polyurea polycondensation, before falling into disuse after the advent of isocyanate chemistry. We systematically re-investigate the advantages and disadvantages of urea for amine transamidation. High ureido-functionalization conversion was obtained for a wide range of substrates, including primary and secondary amines and amino acids. Reaction times are nearly independent of substrate and pH, but excess urea is required for practically feasible reaction rates. Near full conversion of amines into ureido can be achieved within 10 h at 90 °C and within 24 h at 80 °C, and much slower reaction rates were determined at lower temperatures. The importance of the urea/amine ratio and the temperature dependence of the reaction rates indicate that urea decomposition into an isocyanic acid or a carbamate intermediate is the rate-limiting step. The presence of water leads to a modest increase in reaction rates, but the full conversion of amino groups into ureido groups is also possible in the absence of water in neat alcohol, consistent with a reaction mechanism mediated by an isocyanic acid intermediate (where the water assists in the proton transfer). Hence, the reaction with urea avoids the use of toxic isocyanate reagents by in situ generation of the reactive isocyanate intermediate, but the requirement to separate the excess urea from the reaction product remains a major disadvantage.


2015 ◽  
Vol 1083 ◽  
pp. 32-36 ◽  
Author(s):  
Alexander Sandulyak ◽  
Anna Sandulyak ◽  
Petr Shkatov

We note that for a wide range of porous, especially granular, ferromagnetics used as matrices of magnetic filter-separators, there is still an issue of defining their demagnetizing factor N which has a dramatic effect on the values of average magnetic permeability of these operating units of filter-separators. The work aims at filling the existent gaps in the issue, we supply N values depending on the relative size of such magnets as well as a respective generalizing phenomenological dependence which is characterized by an exponential realtion between the demagnetizing factor and relative size radical. The established relation allows obtaining real values of magnetic permeability of a short filter matrix thus providing an unbiased comparative estimate of its technological workability.


Sign in / Sign up

Export Citation Format

Share Document