scholarly journals A Triband Patch Antenna with Monopole-like and Patch-like Radiation Patterns for Multifunctional Wireless Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Hai-Na Song ◽  
Zhao-Hui Chen ◽  
Jian-Feng Li
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Ground Plane ◽  
Wireless Systems ◽  
Metal Sheet ◽  
Radiation Patterns ◽  
Zeroth Order ◽  
Annular Slot ◽  
The Third

A triband patch antenna with monopole-like and patch-like radiation patterns for multifunctional wireless systems is proposed. The antenna consists of a single square radiation patch with an annular slot, a ground plane, and a top-loaded metal sheet. The top-loaded metal sheet is shorted to the ground plane for producing a zeroth-order resonant (ZOR) mode, which has an omnidirectional radiation pattern at the lowest operation band, and its performance is robust to the location of the probe feed. With the annular slot and the off-center probe feed, a dual-resonant TM01 mode is excited, yielding unidirectional radiation patterns for the two upper operation bands. The ZOR and the dual-resonant TM01 modes can be independently controlled, and a triband antenna prototype with a square patch of 24 mm is fabricated and tested. The first bandwidth is 2.5–2.7 GHz with omnidirectional radiation pattern, the second and the third bandwidths with unidirectional radiation are 3.3–3.9 GHz and 4.8–6.1 GHz, and the realized gains over the three bands are about 2.6, 6.5, and 7.5 dBi, respectively.

Design of multiband circularly/linearly polarized antenna for multiple wireless (WWAN/Bluetooth/WiMAX/WLAN/Downlink Satellite System)

2019 ◽  
Vol 11 (9) ◽  
pp. 967-974 ◽  
Author(s):  
Manish Sharma
Keyword(s):  
Wireless Communications ◽  
Circular Polarization ◽  
Radiation Pattern ◽  
Linear Polarization ◽  
Ground Plane ◽  
Wireless Systems ◽  
Satellite System ◽  
Multiband Antenna ◽  
Linearly Polarized ◽  
Downlink System

AbstractIn this article, a multiband antenna for various wireless communications is proposed for WWAN, Bluetooth, WiMAX, WLAN, and Downlink satellite system. The antenna consists of a radiating patch and a rectangular ground plane with four L-shaped stubs which are embedded as side arms to obtain a resonating band for WWAN (1.9GHz), Bluetooth (2.4 GHz), WiMAX (2.5, 3.5, and 5.5 GHz), and WLAN (5.5 GHz) wireless systems and a C-shaped stub is etched on the radiating patch to obtain a higher WLAN band (2.4, 5.2, and 5.8 GHz) and a satellite downlink system (7.5 GHz). The proposed antenna exhibits circular polarization at WWAN band and linear polarization for remaining applications. Also, the proposed antenna exhibits an omnidirectional radiation pattern.

scholarly journals Performance Comparison of Swastika and Rectangular Shaped Microstrip Patch Antenna

2018 ◽  
Vol 1 (1) ◽  
pp. 11-14
Author(s):  
Suroj Burlakoti ◽  
Prakash Rai
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Performance Comparison ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch

In this paper, Microstrip patch antennas with rectangular and swastika shape of patch are designed and its performance parameters are compared with each other. Rectangular and Swastika shaped patch are considered in this paper with common rectangular ground plane. The antenna is simulated at 2.4 GHz using HFSS simulation software. This work mainly includes modification of antenna patch to improve the antenna parameters. The parameters of antenna such as Return loss, VSWR Bandwidth and radiation pattern are compared using simulation. The performance of Swastika shaped antenna was found to be better than rectangular shaped microstrip patch antenna with improved Return Loss, VSWR, Bandwidth and Radiation Pattern.

scholarly journals A Compact ACS-Fed Tri-band Microstrip Monopole Antenna for WLAN/WiMAX Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 87-93 ◽  
Author(s):  
D. Kahina ◽  
C. Mouloud ◽  
D. Mokrane ◽  
M. Faiza ◽  
A. Rabia
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Simple Structure ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Radiation Patterns ◽  
Total Size ◽  
Resonant Frequencies ◽  
Compact Size ◽  
Microstrip Monopole Antenna

This paper proposes a novel small asymmetric coplanar strip (ACS) fed tri-band monopole antenna for WLAN and WiMAX applications. To tune and create multiple resonant frequencies, the exciting strip of monopole antenna is connected to two different arms which are a J-shaped directed toward the asymmetric ground plane and an open stub. The proposed monopole antenna with a total size of 14.6 x17.5 mm2 is fabricated and tested. The measured results indicate that the antenna has impedance bandwidths for 10-dB return loss reach about 500 MHz (2.01-2.52 GHz), 230 MHz (3.48-3.71 GHz) and 1.2GHz (5.59-6.72 GHz) which cover widely the 2.4/5.8 GHz WLAN bands and the 3.5GHz WiMAX band. The simulated radiation patterns of the proposed antenna at the three resonant frequencies have a dipole-like radiation pattern in both E-and H-Planes. The compact size, the simple structure and good radiation performances of the proposed antenna makes it well-suited forthe intended applications.

scholarly journals PROPOSED A COMPACT MULTIBAND AND BROADBAND RECTANGULAR MICROSTRIP PATCH ANTENNA FOR C-BAND AND X-BAND.

2014 ◽  
Vol 13 (3) ◽  
pp. 4291-4301
Author(s):  
Rahul Tiwari ◽  
Seema Verma
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
The Third ◽  
Microstrip Patch ◽  
Highly Efficient ◽  
X Band ◽  
Rectangular Microstrip Patch Antenna ◽  
Multi Band

In this communication two proposed antenna described one for broadband at 6.71445GHz to 11.9362GHz with finite ground plane. The antenna designed with 11.4051mm× 8.388 mm radiating copper patch with ground plane design with 21.0051mm x17. 988mm. And this Compact broadband rectangular shape microstrip patch antenna is designed and analyzed for the return loss of -20.08 dB is achieved at the resonant frequency of 7.941GHz, From Antenna2-it is observed that, antenna for multiband at different frequency. The primary radiating elements are Simple Rectangular Microstrip Patch Antenna in upper side with probe feed and use finite ground plane are two parallel crossed printed slot for three different frequency applications which is smaller in size compared to other available multiband antennas. From the result, it is observed that, the return loss of -16.97 dB is achieved at the first resonant frequency of 4.853GHz, -10.30dB at the second resonant frequency of 8.382GHz, -10.73 dB at the third resonant frequency of 9.265GHz, -17.38 dB at the fourth resonant frequency of 10.15GHz and -12.37 dB at the fifth resonant frequency of 11.91GHz. This broadband and multi-band highly efficient antenna for use in C-Band, and X-Band.

scholarly journals An Octagonal Ring-shaped Parasitic Resonator Based Compact Ultrawideband Antenna for Microwave Imaging Applications

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1354 ◽  
Author(s):  
Amran Hossain ◽  
Mohammad Tariqul Islam ◽  
Ali F. Almutairi ◽  
Mandeep Singh Jit Singh ◽  
Kamarulzaman Mat ◽  
...  
Keyword(s):  
Experimental Data ◽  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Patch Antenna ◽  
Ground Plane ◽  
Microwave Imaging ◽  
Average Efficiency ◽  
Antenna Performance ◽  
Directional Radiation ◽  
Radiation Directivity

An Ultrawideband (UWB) octagonal ring-shaped parasitic resonator-based patch antenna for microwave imaging applications is presented in this study, which is constructed with a diamond-shaped radiating patch, three octagonal, rectangular slotted ring-shaped parasitic resonator elements, and partial slotting ground plane. The main goals of uses of parasitic ring-shaped elements are improving antenna performance. In the prototype, various kinds of slots on the ground plane were investigated, and especially rectangular slots and irregular zigzag slots are applied to enhance bandwidth, gain, efficiency, and radiation directivity. The optimized size of the antenna is 29 × 24 × 1.5 mm3 by using the FR-4 substrate. The overall results illustrate that the antenna has a bandwidth of 8.7 GHz (2.80–11.50 GHz) for the reflection coefficient S11 < −10 dB with directional radiation pattern. The maximum gain of the proposed prototype is more than 5.7 dBi, and the average efficiency over the radiating bandwidth is 75%. Different design modifications are performed to attain the most favorable outcome of the proposed antenna. However, the prototype of the proposed antenna is designed and simulated in the 3D simulator CST Microwave Studio 2018 and then effectively fabricated and measured. The investigation throughout the study of the numerical as well as experimental data explicit that the proposed antenna is appropriate for the Ultrawideband-based microwave-imaging fields.

scholarly journals Harmonic Suppressed Slot Antennas Using Rectangular/Circular Defected Ground Structures

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Mohammad Saeid Ghaffarian ◽  
Gholamreza Moradi ◽  
Reza Zaker
Keyword(s):  
Ground Plane ◽  
Reflection Coefficients ◽  
Harmonic Suppression ◽  
Radiation Patterns ◽  
Harmonic Frequency ◽  
Slot Antennas ◽  
Third Harmonic ◽  
The Third ◽  
Defected Ground Structures ◽  
Ground Structures

Two wide rectangle-shaped microstrip-fed 2.6-GHz slot antennas using defected ground structures (DGSs) with a low design complexity are proposed to achieve wideband harmonic suppression. To accomplish this, two rectangular DGSs (RDGSs) in the first antenna and two circular DGSs (CDGSs) in the second one with various dimensions are etched into the ground plane, which could have a wideband-stop characteristic. Simulated and measured reflection coefficients indicate that the two proposed structures effectively suppress the second and third harmonics up to 23 dB between 3.5 and 10.5 GHz with a maximum ripple of 2.4 dB. In addition, the radiation patterns and peak gains of the antennas can be suppressed at least 17 dB and 7.1 dBi, respectively, at the third harmonic frequency of 7.86 GHz.

scholarly journals Compact Hexagonal Monopole Antenna for Lower 5G Bands

2019 ◽  
Vol 9 (3) ◽  
pp. 4200-4202
Author(s):  
H. Alsaif
Keyword(s):  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Ground Plane ◽  
Wireless Systems ◽  
Wide Band ◽  
Simulation Software ◽  
Planar Antenna ◽  
Total Size ◽  
Patch Geometry ◽  
Compact Planar

This paper presents a compact planar antenna with extreme wide band. The antenna is designed to cover the entire lower 5th generation operating bands ranging from 2.32GHz to more than 12GHz. This band also covers the IEEE 802.11 a/b/g/n/ac. The patch geometry has been simulated using an industrial standard simulation software called CST MWS. The monopole is miniaturized with a total size of 23x24x1.2mm3. The radiator and the ground plane are printed on a substrate of Rogers Duriod RT 5880 with relative permittivity of 2.2 and loss tangent of 0.00009. The simulated reflection coefficient and radiation pattern results are presented. S11 parameter for the designed antenna is less that -10dB over the operating band, with lowest value of -32.5dB at 2.85GHz. The radiation pattern is presented at the two orthogonal planes, elevation (E plane) and azimuth (H plane). Simulated results show that the antenna is appropriate of lower 5G bands application and several other wireless systems.

scholarly journals Low-Profile Array of Wire Patch Antennas

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
H. Zhang ◽  
R. Chantalat ◽  
F. Torres ◽  
M. Thevenot ◽  
T. Monediere ◽  
...  
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Low Cost ◽  
Ground Plane ◽  
Unit Cell ◽  
Power Divider ◽  
Patch Antennas ◽  
Edge Diffraction ◽  
Low Profile

A low-profile antenna over a ground plane that radiates a directive lobe in the end fire direction is described in this paper. An array of 16 wire patch antenna (WPA) fed by an integrated 16 ways power divider has been designed. Owing to its low height, low cost, high robustness, and monopolar radiation pattern, the WPA has been chosen as unit cell of the array that must be placed on the vehicle roof. A gain higher than 18.9 dB was achieved in the end fire direction over a 4.5% bandwidth. However, the antenna has been tilted in order to compensate the beam deviation caused by the edge diffraction. Moreover, a vertical metallic plane has been inserted to eliminate the back fire radiation. Its position and the disposition of the WPAs are explained in this paper. A prototype with four elements has been manufactured in order to validate the antenna principle. A gain difference lower than 0.5 dB is achieved between the measurements and the simulations.

scholarly journals A New Planar Multiband Antenna for GPS, ISM and WiMAX Applications

2017 ◽  
Vol 7 (4) ◽  
pp. 2018 ◽  
Author(s):  
I. Zahraoui ◽  
A. Errkik ◽  
M. C. Abounaima ◽  
A. Tajmouati ◽  
L. E. Abdellaoui ◽  
...  
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Input Impedance ◽  
Microstrip Line ◽  
Ground Plane ◽  
Ground Structure ◽  
Entire Area ◽  
Multiband Antenna ◽  
Measurement Results ◽  
Good Agreement

In this paper a design of a new antenna with modified ground plane is validated for multiband applications. The proposed modified ground structure is incorporated with a patch antenna to boost the performance. The antenna’s entire area is 59.5x47mm<sup>2</sup> and is printed on an FR-4 substrate and fed by a 50 Ohm microstrip line.  This structure is validated in the GPS (1.56-1.58 GHz) band at 1.57 GHz, in the ISM (2.43-2.49 GHz) band at 2.45GHz and in the WiMAX (3.50-3.56 GHz) band at 3.53 GHz. These three frequency bands have good matching input impedance for, S11≤-10 dB. The antenna presents a good performance in terms of radiation pattern, and it is designed, optimized, and miniaturized by using CST-MW whose results are compared with other solvers HFSS and ADS. The results obtained by the use of the three EM solvers are in good agreement. After realization, we have tested and validated this antenna. The measurement results of the antenna present a good agreement with the numerical results.

scholarly journals Design of Microstrip Patch Antenna with DGS for GSM application

2019 ◽  
Vol 7 (1) ◽  
pp. 01-03
Author(s):  
Srashti Sharma ◽  
Vandana Vikas Thakare
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Microstrip Patch ◽  
Circular Rings

In the present paper a micro strip patch antenna with DGS for GSM application is designed and simulated at 1.8 GHz frequency. DGS is applied in the shape of circular rings on the ground plane. Without DGS the return loss is -12 dB, which is further improved to -22dB by applying DGS. The simulated results such as impedance, bandwidth, directivity, gain and radiation pattern are analyzed and compared for with and without DGS.

Sign in / Sign up

Export Citation Format

Share Document