scholarly journals Power Ultrasonic Additive Manufacturing: Process Parameters, Microstructure, and Mechanical Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Abdullahi K. Gujba ◽  
Mamoun Medraj
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Process Parameters ◽  
Dissimilar Materials ◽  
Structural Defects ◽  
Bond Quality ◽  
Ultrasonic Additive Manufacturing ◽  
Pull Out ◽  
Microstructure And Mechanical Properties ◽  
Metallic Parts

Additive manufacturing (AM) for fabricating 3D metallic parts has recently received considerable attention. Among the emerging AM technologies is ultrasonic additive manufacturing (UAM) or ultrasonic consolidation (UC), which uses ultrasonic vibrations to bond similar or dissimilar materials to produce 3D builds. This technology has several competitive advantages over other AM technologies, which includes fabrication of dissimilar materials and complex shapes, higher deposition rate, and fabrication at lower temperatures, which results in no material transformation during processing. Although UAM process optimization and microstructure have been reported in the literature, there is still lack of standardized and satisfactory understanding of the mechanical properties of UAM builds. This could be attributed to structural defects associated with UAM processing. This article discusses the effects of UAM process parameters on the resulting microstructure and mechanical properties. Special attention is given to hardness, shear strength, tensile strength, fatigue, and creep measurements. Also, pull-out, push-out, and push-pin tests commonly employed to characterize bond quality and strength have been reviewed. Finally, current challenges and drawbacks of the process and potential applications have been addressed.

scholarly journals A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel

2019 ◽  
Vol 3 (3) ◽  
pp. 82 ◽  
Author(s):  
Saereh Mirzababaei ◽  
Somayeh Pasebani
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Process Parameters ◽  
Processing Parameters ◽  
Parameters Optimization ◽  
Full Density ◽  
Drying Time ◽  
Metallic Parts ◽  
Binder Saturation ◽  
Binder Jetting

Binder jet additive manufacturing enables the production of complex components for numerous applications. Binder jetting is the only powder bed additive manufacturing process that is not fusion-based, thus manufactured parts have no residual stresses as opposed to laser-based additive manufacturing processes. Binder jet technology can be adopted for the production of various small and large metallic parts for specific applications, including in the biomedical and energy sectors, at a lower cost and shorter lead time. One of the most well-known types of stainless steels for various industries is 316L, which has been extensively manufactured using binder jet technology. Binder jet manufactured 316L parts have obtained near full density and, in some cases, similar mechanical properties compared to conventionally manufactured parts. This article introduces methods, principles, and applications of binder jetting of SS 316L. Details of binder jetting processes, including powder characteristics (shape and size), binder properties (binder chemistry and droplet formation mechanism), printing process parameters (such as layer thickness, binder saturation, drying time), and post-processing sintering mechanism and densification processes, are carefully reviewed. Furthermore, critical factors in the selection of feedstock, printing parameters, sintering temperature, time, atmosphere, and heating rate of 316L binder jet manufactured parts are highlighted and summarized. Finally, the above-mentioned processing parameters are correlated with final density and mechanical properties of 316L components to establish a guideline on feedstock selection and process parameters optimization to achieve desired density, structure and properties for various applications.

Ultrasonic Torsion Welding of Aging Resistant Al/CFRP Joints - Concepts, Mechanical and Microstructural Properties

2017 ◽  
Vol 742 ◽  
pp. 395-400 ◽  
Author(s):  
Florian Staab ◽  
Frank Balle ◽  
Johannes Born
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Materials Science ◽  
Dissimilar Materials ◽  
Material Design ◽  
Ultrasonic Welding ◽  
Fatigue Properties ◽  
Aviation Industry ◽  
Efficient Design ◽  
Engineering Structures

Multi-material-design offers high potential for weight saving and optimization of engineering structures but inherits challenges as well, especially robust joining methods and long-term properties of hybrid structures. The application of joining techniques like ultrasonic welding allows a very efficient design of multi-material-components to enable further use of material specific advantages and are superior concerning mechanical properties.The Institute of Materials Science and Engineering of the University of Kaiserslautern (WKK) has a long-time experience on ultrasonic welding of dissimilar materials, for example different kinds of CFRP, light metals, steels or even glasses and ceramics. The mechanical properties are mostly optimized by using ideal process parameters, determined through statistical test planning methods.This gained knowledge is now to be transferred to application in aviation industry in cooperation with CTC GmbH and Airbus Operations GmbH. Therefore aircraft-related materials are joined by ultrasonic welding. The applied process parameters are recorded and analyzed in detail to be interlinked with the resulting mechanical properties of the hybrid joints. Aircraft derived multi-material demonstrators will be designed, manufactured and characterized with respect to their monotonic and fatigue properties as well as their resistance to aging.

Sign in / Sign up

Export Citation Format

Share Document