scholarly journals Experimental Study on the Structural Performance Degradation of Corrosion-Damaged Reinforced Concrete Beams

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Ju-Seong Jung ◽  
Bang Yeon Lee ◽  
Kang-Seok Lee
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Performance Degradation ◽  
Potential Difference ◽  
Structural Performance ◽  
Rc Beams ◽  
Reinforcing Bars ◽  
Half Cell ◽  
Rc Structures ◽  
Degradation Factor

It is very important to investigate the effects of the seismic performance of corrosion-damaged reinforced concrete (RC) members, in terms of their strength and lateral deformability, on the seismic performance of entire building systems. Such investigation allows accurate evaluation of the seismic performance of RC structures with corroded members, including beams and columns. However, current techniques for evaluating the seismic performance of existing RC structures do not take the effects of deterioration (including the corrosion of reinforcing bars) on the performance of RC members into account. The main objective of this research is to propose a practical methodology for evaluating the seismic performance of RC buildings with corrosion-damaged members. We extrapolate a structural performance degradation factor from the strength-deformation capability of corroded members to allow direct quantitative evaluation of their seismic performance. In this study, as a first step toward achieving this goal, we experimentally investigated the effect of reinforcing bar corrosion on the behavior of RC beams and the structural performance degradation factor. Our analysis was based on the strength-deformation capabilities of corrosion-damaged beams. We also propose a relationship between the half-cell potential of corroded reinforcing bars and the structural performance degradation behavior of RC beams. Our results indicate that there is a relatively strong correlation between the performance degradation factor and the average potential difference, with coefficients of determination (R2) of the flexural and shear beams of 0.78 and 0.91, respectively. The potential difference, which was measured using the half-cell measurement method, can serve as one of the indicators of relative structural degradation, but we must ensure that the environmental measurement conditions are held constant.

scholarly journals A Practical Finite Element Modeling Strategy to Capture Cracking and Crushing Behavior of Reinforced Concrete Structures

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 506 ◽  
Author(s):  
Alexandre Mathern ◽  
Jincheng Yang
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Constitutive Relations ◽  
Fe Analysis ◽  
Rc Beams ◽  
Cracking Behavior ◽  
Concrete Cracking ◽  
Rc Structures ◽  
Nonlinear Fe Analysis ◽  
Modeling Strategy

Nonlinear finite element (FE) analysis of reinforced concrete (RC) structures is characterized by numerous modeling options and input parameters. To accurately model the nonlinear RC behavior involving concrete cracking in tension and crushing in compression, practitioners make different choices regarding the critical modeling issues, e.g., defining the concrete constitutive relations, assigning the bond between the concrete and the steel reinforcement, and solving problems related to convergence difficulties and mesh sensitivities. Thus, it is imperative to review the common modeling choices critically and develop a robust modeling strategy with consistency, reliability, and comparability. This paper proposes a modeling strategy and practical recommendations for the nonlinear FE analysis of RC structures based on parametric studies of critical modeling choices. The proposed modeling strategy aims at providing reliable predictions of flexural responses of RC members with a focus on concrete cracking behavior and crushing failure, which serve as the foundation for more complex modeling cases, e.g., RC beams bonded with fiber reinforced polymer (FRP) laminates. Additionally, herein, the implementation procedure for the proposed modeling strategy is comprehensively described with a focus on the critical modeling issues for RC structures. The proposed strategy is demonstrated through FE analyses of RC beams tested in four-point bending—one RC beam as reference and one beam externally bonded with a carbon-FRP (CFRP) laminate in its soffit. The simulated results agree well with experimental measurements regarding load-deformation relationship, cracking, flexural failure due to concrete crushing, and CFRP debonding initiated by intermediate cracks. The modeling strategy and recommendations presented herein are applicable to the nonlinear FE analysis of RC structures in general.

Repair of Severely Damaged Reinforced Concrete Beams with High-Strength Cementitious Grout

2020 ◽  
Vol 2674 (6) ◽  
pp. 372-384
Author(s):  
Antoine N. Gergess ◽  
Mahfoud Shaikh Al Shabab ◽  
Razane Massouh
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Cementitious Materials ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Reinforced Concrete Beams ◽  
Rc Beams ◽  
Rc Structures

High-strength cementitious materials such as high-performance concrete are extensively used for retrofit of reinforced concrete (RC) structures. The effectiveness of these materials is increased when mixed with steel fibers. A commonly used technique for strengthening and repair of RC beams consists of applying high-performance fiber-reinforced concrete jackets around the beam perimeter. This paper investigates the jacketing method for repairing severely damaged RC beams. Four 2 m (6 ft 63/4 in.) long rectangular RC beams, 200 × 300 mm (8 ×12 in.) were initially cast and loaded until failure based on three-point bending tests. The four beams were then repaired by thickening the sides of the damaged RC beams using a commercially available high-strength shrinkage grout with and without steel fibers. Strain and deformation were recorded in the damaged and repaired beams to compare structural performance. It is shown that the flexural strength of the repaired beams is increased and the crack pattern under loading is improved, proving that the proposed repair method can restore the resistance capacity of RC beams despite the degree of damage. A method for repair is proposed and an analytical investigation is also performed to understand the structural behavior of the repaired beams based on different thickening configurations.

scholarly journals Bearing capacity of RC beams reinforced with high strength rebars and steel plate

2018 ◽  
Vol 230 ◽  
pp. 02003 ◽  
Author(s):  
Taras Bobalo ◽  
Yaroslav Blikharskyy ◽  
Rostyslav Vashkevich ◽  
Myhailo Volynets
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Steel Plate ◽  
Concrete Structures ◽  
High Strength ◽  
Strength Properties ◽  
Rc Beams ◽  
Reinforcing Bars ◽  
External Reinforcement ◽  
Effective Use

Nowadays, reducing the material content of not only buildings and structures in general, but also individual constructions is a topical task that can be realized through the use of high-strength concrete and reinforcement, as well as with the use of external reinforcement. The concentrated location of sheet reinforcement on the external the most tense facets of steel and concrete structures increases the operating height of the cross-section, makes it possible to more effectively use the strength properties of steel in comparison with conventional reinforced concrete, and with the same bearing capacity to economize on expenses. Composite and monolithic reinforced concrete structures with external reinforcement are used in various construction sectors around the world. This contributed to the expansion of the use of reinforced concrete for special buildings of power-engineering and hydrotechnical construction. The technical nd econom efficiency, as well as the possibility of using external rebar as formwork for monolithic concrete construction, have been proved. Therefore, there is a need for the study of structures with combined reinforcement, in which high rigidity of steel and concrete structures is combined with an effective use of high-strength reinforcing bars (rebar) without prior tension

Test Research on Seismic Performance of Beam

2012 ◽  
Vol 594-597 ◽  
pp. 1680-1683
Author(s):  
Hai Tao Wan ◽  
Yu Qing Yuan
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Effective Means ◽  
Test Method ◽  
Frame Structure ◽  
Beam Specimen ◽  
Rc Beam ◽  
Rc Beams ◽  
Reinforced Concrete Frame ◽  
Concrete Frame

Reinforced concrete ( RC) frame structure is one type of building structure which is widely used in China. Damage of some reinforced concrete frame structures under the earthquake is caused by the damage of RC beams, So RC beams are an essential seismic members. The paper introduces the design of RC beam specimen, mechanical properties of materials, production of RC beam specimen, test method, loading device, loading system, the contents of measurement and data acquisition in detail. From the above analysis, it is obvious that the test is the most effective means of studying the seismic performance of beam.

Shear behavior of reinforced concrete beams strengthened in flexure with bonded carbon fibre reinforced polymers laminates

2005 ◽  
Vol 32 (5) ◽  
pp. 812-824 ◽  
Author(s):  
Francesco Bencardino ◽  
Vincenzo Colotti ◽  
Giuseppe Spadea ◽  
Ramnath Narayan Swamy
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Shear Behavior ◽  
Structural Performance ◽  
Rc Beams ◽  
Shear Reinforcement ◽  
Brittle Behavior ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer

The aim of this paper is to clarify the structural performance of reinforced concrete (RC) beams with weak or without any internal shear reinforcement and externally strengthened in flexure with carbon fibre reinforced polymer (CFRP) laminates, when subjected to a shear-dominant-loading regime. Seven RC beams were specifically designed, without and with an external anchorage system, which was carefully detailed to enhance the benefits of the strengthening laminate and counteract the destructive effects of shear forces. All the beams were identical in terms of their geometry, longitudinal internal reinforcement, and concrete strength but varied, to highlight the role of shear behavior, in terms of their internal and external shear reinforcement as well as in their loading test regime. The beams were tested under four-point bending and extensively instrumented to monitor strains, deflection, cracking, load carrying capacity, and failure modes. The structural response of the tested beams has, then, been critically analyzed in terms of deformability, strength, and failure processes that occur under a shear-dominant loading regime. It is shown that with a carefully designed anchorage system, a brittle behavior without yielding of tension steel reinforcement of a flexural strengthened beam can be transformed to a less brittle behavior with yielding of tension steel reinforcement and a well-defined enhancement of structural performance in terms of both deformation and strength. The results presented in this paper should enable engineers to counteract shear failure of externally strengthened beams with little or even no internal shear reinforcement.Key words: carbon fibre reinforced polymer, shear behavior, external flexural strengthening, structural performance.

CFD Application for Performance Based Safety Verification of Reinforced Concrete Beam in Computer Simulation Building Fire

2012 ◽  
Vol 601 ◽  
pp. 190-195
Author(s):  
Chia Chun Yu ◽  
Shih Cheng Wang ◽  
Cherng Shing Lin ◽  
Te Chi Chen
Keyword(s):  
Reinforced Concrete ◽  
Fire Protection ◽  
Fluid Dynamic ◽  
Bending Moment ◽  
Fire Intensity ◽  
Fire Damage ◽  
Rc Beams ◽  
Fire Dynamics ◽  
Rc Structures ◽  
Building Fire

More than 90% of the buildings in Taiwan use reinforced concrete (RC) structures. Before or after fire damage, whether the RC structure accord Performance Based Design (PBD) fire code or safe evaluation are important in building fire protection verification. However, obtaining fire thermal parameters detailed quantitative data from building fire tests or actual building fires are difficult. Therefore, computational fluid dynamic (CFD) integration to simulate fire scenarios has been widely utilized in fire protection engineering. This study utilizes Fire Dynamics Simulator (FDS) fire model and PHOENICS field model software to simulate fire development and beams inner temperature variation. The structural strength estimated using beam cross-sections temperature to investigate dynamic ultimate bending moment (Mu) of RC beams. This integration method can investigate the influence of different beam positions, fire intensity, fire duration and fire damage sustained (two or three faces heated) for RC beams fire protection safe verification.

scholarly journals Seismic performance assessment of RC columns with interlocking hoops

2021 ◽  
Author(s):  
Tae-Hoon Kim
Keyword(s):  
Reinforced Concrete ◽  
Performance Assessment ◽  
Seismic Performance ◽  
Evaluation System ◽  
Damage Index ◽  
Seismic Performance Assessment ◽  
Rc Columns ◽  
Rc Structures ◽  
Damage Indices ◽  
Transverse Steel

The aim of this study is to analytically assess the seismic performance of reinforced concrete (RC) columns with interlocking hoops using a novel damage index, and to provide data for developing next generation seismic design criteria. Seismic performance of RC columns is controlled by the level of confinement provided by transverse steel. Interlocking hoops are commonly used in RC columns because they can provide more effective confinement than rectangular hoops. Three RC interlocking columns were tested under a constant axial load and a cyclically reversed horizontal load. A computer program, RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), is used to analyze RC structures. Novel damage indices aim to provide a means of quantifying numerically the performance level in RC columns with interlocking hoops sustained under earthquake loading. The proposed numerical method for the seismic performance assessment of interlocking columns is verified by comparison with the experimental results.

Seismic performance improvement of GFRP-RC moment frames

2020 ◽  
Vol 47 (6) ◽  
pp. 704-717 ◽  
Author(s):  
Shervin K. Ghomi ◽  
Ehab El-Salakawy
Keyword(s):  
Energy Dissipation ◽  
Cyclic Loading ◽  
Seismic Performance ◽  
Bending Moment ◽  
Steel Plates ◽  
Fiber Reinforced Polymers ◽  
Rc Beams ◽  
Moment Frames ◽  
Initial Stiffness ◽  
Rc Structures

Although structures made of concrete reinforced with fiber-reinforced polymers (FRP) have shown promising performance under gravity loads, their performance under cyclic loading is still one of the main concerns. Although the linear nature of FRP reinforcement could be advantageous in terms of limiting the residual damage after an earthquake event, it lowers the energy dissipation of the structure, which can compromise its seismic performance. In this research, adding steel plates at selected locations in moment-resisting frames is proposed as a solution to improve seismic performance of FRP-reinforced concrete (FRP-RC) structures. Three full-scale cantilever beams, one steel-RC, one FRP-RC, and one FRP-RC with proposed steel plates, were constructed and tested under reversed cyclic loading. The results indicated that the proposed mechanism effectively improves the seismic performance of FRP-RC beams by increasing their initial stiffness and energy dissipation. Moreover, a computer simulation, using the moment–curvature determination process, was conducted to calculate bending moment capacity of FRP-RC beams with steel plates.

FACTORS AFFECTING SEISMIC BEHAVIOUR OF REINFORCED CONCRETE STRUCTURES AFTER FIRE EXPOSURE

2019 ◽  
Vol 1 (Special Issue on First SACEE'19) ◽  
pp. 31-41 ◽  
Author(s):  
Alper Ilki ◽  
Ugur Demir
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Elevated Temperatures ◽  
Load Capacity ◽  
Lateral Load ◽  
Earthquake Risk ◽  
Fire Damage ◽  
Seismic Behaviour ◽  
Rc Structures ◽  
The Impact

In the areas under high earthquake risk, the impact of fire damage on the seismic performance of the reinforced concrete (RC) structures ought to be realistically taken into account while assessing the fire damage to develop reuse/repair/replace strategies through the remaining service life. In the scope of this study, a literature review is conducted on the changes of mechanical characteristics of concrete and reinforcement caused by a fire with a particular emphasis on the post-cooling stage. Post-cooling behaviour of RC members is different than the behaviour under elevated temperatures and hence it is of vital importance on structural seismic performance assessment after a fire. Apart from material-wise assessment methodologies, post-fire seismic performance of RC structural members is also discussed through post-fire simulated seismic loading tests conducted on full-scale cast-in-place and precast columns. The test results pointed out to a reduction in lateral load bearing capacity of the cast-in-place columns subjected to fire whereas fire-exposed precast columns demonstrated better performance in terms of residual lateral load capacity due to the lower axial load and larger heights. All columns exhibited satisfactory performance in terms of ductility.

scholarly journals A Comparative Study of the Performance of Slender Reinforced Concrete Columns with Different Cross-Sectional Shapes

Fibers ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 35
Author(s):  
Safaa Qays Abdualrahman ◽  
Alaa Hussein Al-Zuhairi
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Slenderness Ratio ◽  
Structural Performance ◽  
Element Analysis ◽  
Cross Sectional ◽  
Rc Structures ◽  
Section Size ◽  
Concentric Loading ◽  
Rectangular Columns

Most reinforced concrete (RC) structures are constructed with square/rectangular columns. The cross-section size of these types of columns is much larger than the thickness of their partitions. Therefore, parts of these columns are protruded out of the partitions. The emergence of columns edges out of the walls has some disadvantages. This limitation is difficult to be overcome with square or rectangular columns. To solve this problem, new types of RC columns called specially shaped reinforced concrete (SSRC) columns have been used as hidden columns. Besides, the use of SSRC columns provides many structural and architectural advantages as compared with rectangular columns. Therefore, this study was conducted to explain the structural performance of slender SSRC columns experimentally and numerically via nonlinear finite element analysis. The study is based on nine RC specimens tested up to failure, as well as eighteen finite element (FE) models analyzed by Abaqus soft wear program. The use of SSRC columns led to increase strength by about 12% and reduce deformations, especially with slenderness ratio more than 40 as compared with equivalent square-shaped columns. Two design formulas were proposed to determine the compressive strength of SSRC columns under concentric loading. The results obtained indicate a good structural performance of SSRC columns when compared with equivalent square-shaped columns.

Sign in / Sign up

Export Citation Format

Share Document