scholarly journals Bioremoval of Cobalt(II) from Aqueous Solution by Three Different and Resistant Fungal Biomasses

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Juan F. Cárdenas González ◽  
Adriana S. Rodríguez Pérez ◽  
Juan M. Vargas Morales ◽  
Víctor M. Martínez Juárez ◽  
Ismael Acosta Rodríguez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Fungal Biomass ◽  
Contaminated Water ◽  
Removal Capacity ◽  
Optimum Ph

The biosorption of Co(II) on three fungal biomasses: Paecilomyces sp., Penicillium sp., and Aspergillus niger, was studied in this work. The fungal biomass of Paecilomyces sp. showed the best results, since it removes 93% at 24 h of incubation, while the biomasses of Penicillium sp. and Aspergillus niger are less efficient, since they remove the metal 77.5% and 70%, respectively, in the same time of incubation, with an optimum pH of removal for the three analyzed biomasses of 5.0 ± 0.2 at 28°C. Regarding the temperature of incubation, the most efficient biomass was that of Paecilomyces sp., since it removes 100%, at 50°C, while the biomasses of Penicillium sp. and Aspergillus niger remove 97.1% and 94.1%, at the same temperature, in 24 hours of incubation. On the contrary, if the concentration of the metal is increased, the removal capacity for the three analyzed biomasses decreases; if the concentration of the bioadsorbent is increased, the removal of the metal also increases. It was observed that, after 4 and 7 days of incubation, 100%, 100%, and 96.4% of Co(II) present in naturally contaminated water were removed, respectively.

scholarly journals Biosorption of mercury (II) from aqueous solution onto biomass of Aspergillus niger

2018 ◽  
Vol 3 (3) ◽  
pp. 15-25
Author(s):  
Ismael Acosta Rodríguez ◽  
Nancy Cecilia Pacheco-Castillo ◽  
Juan Fernando Cárdenas-González ◽  
Maria de Guadalupe Moctezuma Zarate ◽  
Víctor Manuel Martínez-Juárez ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Fungal Biomass ◽  
Industrial Wastewater ◽  
Absorption Spectrometry ◽  
Effect Of Temperature ◽  
Contaminated Water ◽  
Spectrometry Method ◽  
Removal Capacity

Mercury (II) removal capacity in aqueous solution by Aspergillus niger biomass was analyzed by the atomic absorption spectrometry method. The fungus grew in 2000 ppm of the metal (20.3%). Biosorption was evaluated at different pH (3.5, 4.5, and 5.5) at different times. In addition, the effect of temperature in the range of 28°C to 45oC and removal at different initial concentrations of Hg (II) from 100 to 500 mg/L were also studied. The highest biosorption (83.2% with 100 mg/L of the metal, and 1 g of biomass) was 24 h at pH of 5.5 and 28oC. With regard to temperature, the highest removal was to 28oC, with an 83.2% removal at 24 h, and at higher biomass concentrations, the removal was most efficient (100% in 12 h with 5 g of biomass). Fungal biomass showed good removal capacity of the metal in situ, 69% removal in contaminated water, after 7 days of incubation and 5 g of biomass (100 mL water), so it can be used to remove industrial wastewater.

scholarly journals Bioremoval of Different Heavy Metals by the Resistant Fungal StrainAspergillus niger

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Ismael Acosta-Rodríguez ◽  
Juan F. Cárdenas-González ◽  
Adriana S. Rodríguez Pérez ◽  
Juana Tovar Oviedo ◽  
Víctor M. Martínez-Juárez
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aspergillus Niger ◽  
Fungal Biomass ◽  
Dry Weight ◽  
Removal Capacity ◽  
Removal Of Heavy Metals ◽  
The Ideal

The objective of this work was to study the resistance and removal capacity of heavy metals by the fungusAspergillus niger. We analyzed the resistance to some heavy metals by dry weight and plate: the fungus grew in 2000 ppm of zinc, lead, and mercury, 1200 and 1000 ppm of arsenic (III) and (VI), 800 ppm of fluor and cobalt, and least in cadmium (400 ppm). With respect to their potential of removal of heavy metals, this removal was achieved for zinc (100%), mercury (83.2%), fluor (83%), cobalt (71.4%), fairly silver (48%), and copper (37%). The ideal conditions for the removal of 100 mg/L of the heavy metals were 28°C, pH between 4.0 and 5.5, 100 ppm of heavy metal, and 1 g of fungal biomass.

Bioadsorption of lead(II) from aqueous solution by fungal biomass of Aspergillus niger

2001 ◽  
Vol 87 (3) ◽  
pp. 273-277 ◽  
Author(s):  
Wang Jianlong ◽  
Zhan Xinmin ◽  
Ding Decai ◽  
Zhou Ding
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Fungal Biomass

Removal of a Dye from an Aqueous Solution by the Fungus Aspergillus niger

2000 ◽  
Vol 35 (1) ◽  
pp. 95-112 ◽  
Author(s):  
Yuzhu Fu ◽  
T. Viraraghavan
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Fungal Biomass ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Promising Alternative ◽  
Biosorption Capacity ◽  
Initial Ph ◽  
Removal Processes ◽  
Kinetics Of

Abstract Biosorption is becoming a promising alternative to replace or supplement the present dye removal processes from dye wastewater. In this study, removal of a dye, Basic Blue 9, from an aqueous solution by biosorption on the dead fungal biomass Aspergillus niger was studied. The effective pretreatment method for increasing the biosorption capacity of A. niger was investigated. Autoclaving was found to effectively enhance the biosorption capacity of A. niger to 18.54 mg/g compared with 1.17 mg/g of living cells for Basic Blue 9. Batch pH, kinetic and isotherm studies were conducted to evaluate the biosorption capacity of the pretreated (dead) biomass. The initial pH of the dye solution strongly affected the biosorption capacity and rate. The effective initial pH was between 4 and 6. The equilibrium time varied with the initial pH of the dye solution and was set at 30 h because no significant dye removals occurred after that time of contact. The Lagergren and Ho et al. models can be used to describe the kinetics of Basic Blue 9 biosorption on A. niger successfully for different initial pH values, except for pH 4. At initial pH 4, biosorption of Basic Blue 9 fitted the Langmuir equation well; at initial pH 10, the Langmuir and Freundlich isotherm models both fitted biosorption well. The results of this study indicated that fungal biomass of A. niger can be used for removing Basic Blue 9 from an aqueous solution.

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

scholarly journals Nopalea cochenillifera Biomass as Bioadsorbent in Water Purification

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2012
Author(s):  
Vitória Régia do Nascimento Lima ◽  
Álvaro Gustavo Ferreira da Silva ◽  
Renata Ranielly Pedroza Cruz ◽  
Luana da Silva Barbosa ◽  
Neilier Rodrigues da Silva Junior ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Water Purification ◽  
Reducing Sugars ◽  
Northeastern Brazil ◽  
Human Consumption ◽  
Contaminated Water ◽  
Water Safety ◽  
Total Coliforms ◽  
Exchange Matrix ◽  
Nopalea Cochenillifera

Contaminated water consumption is one of the greatest risks to human health, especially in underdeveloped and developing countries. Water is a universal right, but millions of people worldwide consume untreated surface water. The objective in this study is to evaluate water purification with Nopalea cochenillifera var. Miúda biomass. Fragments (1, 2, and 3 g) of N. cochenillifera were added to the aqueous solution containing red-yellow Chromic and Podzolic Luvisol simulating turbid water sources in Northeastern Brazil. The total, non-structural (i.e., reducing and non-reducing sugars, alcohol insoluble solids), and structural (i.e., pectin) carbohydrates, adsorption kinetics, turbidity, electrical conductivity, pH, zeta potential, and total coliforms presence were evaluated. Findings show that the Nopalea cochenillifera biomass adsorbed the suspended particles in the aqueous solution, making it more translucent due to the complex and heterogeneous adsorbents’ ion exchange matrix, but the biomass addition did not eliminate total coliforms from the aqueous solution. We concluded that the Nopalea cochenillifera biomass water treatment reduces suspended dissolved particles and turbidity, but it needs to be associated with other treatments to eliminate total coliforms and ensure water safety for human consumption.

scholarly journals Eggshell Powder as an Adsorbent for Removal of Fluoride from Aqueous Solution: Equilibrium, Kinetic and Thermodynamic Studies

2012 ◽  
Vol 9 (3) ◽  
pp. 1457-1480 ◽  
Author(s):  
R. Bhaumik ◽  
N. K. Mondal ◽  
B. Das ◽  
P. Roy ◽  
K. C. Pal ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Fluoride Removal ◽  
Contaminated Water ◽  
Fluoride Adsorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Maximum Removal

A new medium, eggshell powder has been developed for fluoride removal from aqueous solution. Fluoride adsorption was studied in a batch system where adsorption was found to be pH dependent with maximum removal efficiency at 6.0. The experimental data was more satisfactorily fitted with Langmuir isotherm model. The kinetics and the factor controlling adsorption process fully accepted by pseudo-second-order model were also discussed. Eawas found to be 45.98 kJmol-1by using Arrhenius equation, indicating chemisorption nature of fluoride onto eggshell powder. Thermodynamic study showed spontaneous nature and feasibility of the adsorption process with negative enthalpy (∆H0) value also supported the exothermic nature. Batch experiments were performed to study the applicability of the adsorbent by using fluoride contaminated water collected from affected areas. These results indicate that eggshell powder can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution as well as groundwater.

Removal of Cr(VI) from Aqueous Solution by Acid Treated Fungal Biomass

2011 ◽  
Vol 197-198 ◽  
pp. 131-135
Author(s):  
Li Fang Zhang ◽  
Ying Ying Chen ◽  
Wen Jie Zhang
Keyword(s):  
Aqueous Solution ◽  
Fungal Biomass ◽  
Adsorption Model ◽  
Solution Ph ◽  
Initial Concentration ◽  
Biosorption Capacity ◽  
Penicillium Sp ◽  
Chromium Vi ◽  
Equilibrium Data ◽  
Biosorption Equilibrium

Biosorption of chromium (VI) ions from aqueous solution with fungal biomass Penicillium sp. was investigated in the batch system. The influence of contact time, solution pH, biosorbent concentration, initial concentration of Cr (VI) ions and temperature on biosorption capacity of Cr (VI) ions was studied. The uptake of Cr (VI) was highly pH dependent and the optimum pH for biosorption of Cr (VI) ions was found to be 2.0. Biosorption capacity of Cr (VI) ions decreased with increased biosorbent concentration and increased with increase in initial concentration of Cr (VI) ions. The experiment results also showed that high temperatures increased the biosorption capacity of Cr (VI) by fungal biomass. It was found that the biosorption equilibrium data were fitted very well to the kangmuir as well as to the Freundlich adsorption model. The maximum sorptive capacities obtained from the Langmuir equation at temperature of 20, 30 and 40°C were 25.91, 32.68 and 35.97 mg/g for Cr (VI) ions, respectively. The results of this study indicated that the fungal biomass of Penicillium sp. is a promising biosorbent for removal of chromium (VI) ions from the water.

scholarly journals Removal of Ni (II) from Aqueous Solution by Adsorption onto Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Low Cost ◽  
Chemical Characterization ◽  
Maximum Adsorption Capacity ◽  
Adsorption Data ◽  
Optimum Ph ◽  
Nickel Adsorption

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174

Removal of aluminium from aqueous solution by four wild-type strains of Aspergillus niger

2018 ◽  
Vol 42 (2) ◽  
pp. 291-296 ◽  
Author(s):  
Katarína Boriová ◽  
Slavomír Čerňanský ◽  
Peter Matúš ◽  
Marek Bujdoš ◽  
Alexandra Šimonovičová ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Aspergillus Niger ◽  
Wild Type ◽  
Type Strains
Sign in / Sign up

Export Citation Format

Share Document